Commit graph

1,326,213 commits

Author SHA1 Message Date
Martin Pålsson
b88194c1cf net: usb: lan78xx: scan all MDIO addresses on LAN7801
[ Upstream commit f1e2f0ce70 ]

The LAN7801 is designed exclusively for external PHYs (unlike the
LAN7800/LAN7850 which have internal PHYs), but lan78xx_mdio_init()
restricts PHY scanning to MDIO addresses 0-7 by setting phy_mask to
~(0xFF). This prevents discovery of external PHYs wired to addresses
outside that range.

One such case is the DP83TC814 100BASE-T1 PHY, which is typically
configured at MDIO address 10 via PHYAD bootstrap pins and goes
undetected with the current mask.

Remove the restrictive phy_mask assignment for the LAN7801 so that the
default mask of 0 applies, allowing all 32 MDIO addresses to be
scanned during bus registration.

Fixes: 02dc1f3d61 ("lan78xx: add LAN7801 MAC only support")
Signed-off-by: Martin Pålsson <martin@poleshift.se>
Link: https://patch.msgid.link/0110019c6f388aff-98d99cf0-4425-4fff-b16b-dea5ad8fafe0-000000@eu-north-1.amazonses.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:31 -05:00
Ziyi Guo
9c79b839a6 net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
[ Upstream commit 64868f5eca ]

kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.

The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:

kaweth_start_xmit() {
    netif_stop_queue();
    usb_submit_urb(kaweth->tx_urb);
}

kaweth_set_rx_mode() {
    netif_stop_queue();
    netif_wake_queue();             // wakes TX queue before URB is done
}

kaweth_start_xmit() {
    netif_stop_queue();
    usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}

This triggers the WARN in usb_submit_urb():

  "URB submitted while active"

This is a similar class of bug fixed in rtl8150 by

- commit 958baf5eae ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").

Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260217175012.1234494-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:31 -05:00
Hyunwoo Kim
f7ad8b1d0e espintcp: Fix race condition in espintcp_close()
[ Upstream commit e1512c1db9 ]

This issue was discovered during a code audit.

After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.

The following is a simple race scenario:

           cpu0                             cpu1

  espintcp_close()
    cancel_work_sync(&ctx->work);
                                     espintcp_write_space()
                                       schedule_work(&ctx->work);

To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync().

Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZSie7rEdh9Nu0eM@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:31 -05:00
Tetsuo Handa
a3c8fede03 xfrm: always flush state and policy upon NETDEV_UNREGISTER event
[ Upstream commit 4efa91a285 ]

syzbot is reporting that "struct xfrm_state" refcount is leaking.

  unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
  ref_tracker: netdev@ffff888052f24618 has 1/1 users at
       __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
       netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
       xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
       xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
       xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
       xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
       netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
       xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
       netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
       netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
       netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
       sock_sendmsg_nosec net/socket.c:727 [inline]
       __sock_sendmsg net/socket.c:742 [inline]
       ____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
       ___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
       __sys_sendmsg+0x16d/0x220 net/socket.c:2678
       do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
       do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
       entry_SYSCALL_64_after_hwframe+0x77/0x7f

This is because commit d77e38e612 ("xfrm: Add an IPsec hardware
offloading API") implemented xfrm_dev_unregister() as no-op despite
xfrm_dev_state_add() from xfrm_state_construct() acquires a reference
to "struct net_device".
I guess that that commit expected that NETDEV_DOWN event is fired before
NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()
is called only if (dev->features & NETIF_F_HW_ESP) != 0.

Sabrina Dubroca identified steps to reproduce the same symptoms as below.

  echo 0 > /sys/bus/netdevsim/new_device
  dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/)
  ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \
     spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128   \
     offload crypto dev $dev dir out
  ethtool -K $dev esp-hw-offload off
  echo 0 > /sys/bus/netdevsim/del_device

Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after
xfrm_dev_state_add() acquired a reference to "struct net_device".
Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit
when acquiring a reference to "struct net_device".

Commit 03891f820c ("xfrm: handle NETDEV_UNREGISTER for xfrm device")
re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that
commit for unknown reason chose to share xfrm_dev_down() between the
NETDEV_DOWN event and the NETDEV_UNREGISTER event.
I guess that that commit missed the behavior in the previous paragraph.

Therefore, we need to re-introduce xfrm_dev_unregister() in order to
release the reference to "struct net_device" by unconditionally flushing
state and policy.

Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:31 -05:00
Matt Johnston
2dfbc8c17d ipmi: ipmb: initialise event handler read bytes
[ Upstream commit 9f235ccecd ]

IPMB doesn't use i2c reads, but the handler needs to set a value.
Otherwise an i2c read will return an uninitialised value from the bus
driver.

Fixes: 63c4eb3471 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Message-ID: <20260113-ipmb-read-init-v1-1-a9cbce7b94e3@codeconstruct.com.au>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:31 -05:00
Leon Romanovsky
f1713988e9 xfrm: skip templates check for packet offload tunnel mode
[ Upstream commit 0a4524bc69 ]

In packet offload, hardware is responsible to check templates. The
result of its operation is forwarded through secpath by relevant
drivers. That secpath is actually removed in __xfrm_policy_check2().

In case packet is forwarded, this secpath is reset in RX, but pushed
again to TX where policy is rechecked again against dummy secpath
in xfrm_policy_ok().

Such situation causes to unexpected XfrmInTmplMismatch increase.

As a solution, simply skip template mismatch check.

Fixes: 600258d555 ("xfrm: delete intermediate secpath entry in packet offload mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:31 -05:00
Jiayuan Chen
dc0abce055 xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
[ Upstream commit 1799d8abea ]

xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).

This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:

=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
 xfrm_state_find+0x2424/0xa940
 xfrm_resolve_and_create_bundle+0x906/0x5a20
 xfrm_lookup_with_ifid+0xcc0/0x3770
 xfrm_lookup_route+0x63/0x2b0
 ip_route_output_flow+0x1ce/0x270
 udp_sendmsg+0x2ce1/0x3400
 inet_sendmsg+0x1ef/0x2a0
 __sock_sendmsg+0x278/0x3d0
 __sys_sendto+0x593/0x720
 __x64_sys_sendto+0x130/0x200
 x64_sys_call+0x332b/0x3e70
 do_syscall_64+0xd3/0xf80
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Local variable tmp.i.i created at:
 xfrm_resolve_and_create_bundle+0x3e3/0x5a20
 xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================

Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error.

Fixes: a1e59abf82 ("[XFRM]: Fix wildcard as tunnel source")
Reported-by: syzbot+e136d86d34b42399a8b1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68bf1024.a70a0220.7a912.02c2.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:30 -05:00
Maciej Grochowski
2e4d5e8d86 ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
[ Upstream commit 186615f885 ]

Number of MW LUTs depends on NTB configuration and can be set to zero,
in such scenario rounddown_pow_of_two will cause undefined behaviour and
should not be performed.
This patch ensures that rounddown_pow_of_two is called on valid value.

Signed-off-by: Maciej Grochowski <Maciej.Grochowski@sony.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:30 -05:00
Maciej Grochowski
0e93042094 ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
[ Upstream commit c8ba7ad2cc ]

Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS,
This patch protects against invalid index out of bounds access to mw_sizes
When invalid access print message to user that configuration is not valid.

Signed-off-by: Maciej Grochowski <Maciej.Grochowski@sony.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:30 -05:00
Tomas Melin
faf7f4073d rtc: zynqmp: correct frequency value
[ Upstream commit 2724fb4d42 ]

Fix calibration value in case a clock reference is provided.
The actual calibration value written into register is
frequency - 1.

Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-1-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:30 -05:00
Alex Hung
d4c08521c7 drm/amd/display: Remove conditional for shaper 3DLUT power-on
[ Upstream commit 1b38a87b8f ]

[Why]
Shaper programming has high chance to fail on first time after
power-on or reboot. This can be verified by running IGT's kms_colorop.

[How]
Always power on the shaper and 3DLUT before programming by
removing the debug flag of low power mode.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:30 -05:00
Arnd Bergmann
5c3de2cae7 arm64: hugetlbpage: avoid unused-but-set-parameter warning (gcc-16)
[ Upstream commit 729a2e8e9a ]

gcc-16 warns about an instance that older compilers did not:

arch/arm64/mm/hugetlbpage.c: In function 'huge_pte_clear':
arch/arm64/mm/hugetlbpage.c:369:57: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter=]

The issue here is that __pte_clear() does not actually use its second
argument, but when CONFIG_ARM64_CONTPTE is enabled it still gets
updated.

Replace the macro with an inline function to let the compiler see
the argument getting passed down.

Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:30 -05:00
Adarsh Das
4f2eb019d8 btrfs: replace BUG() with error handling in __btrfs_balance()
[ Upstream commit be6324a809 ]

We search with offset (u64)-1 which should never match exactly.
Previously this was handled with BUG(). Now logs an error
and return -EUCLEAN.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Adarsh Das <adarshdas950@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
Takashi Iwai
fc9e5af60d ALSA: usb-audio: Add sanity check for OOB writes at silencing
[ Upstream commit fba2105a15 ]

At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size.  But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.

For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows.  Also, report back the transfer error properly from there,
too.

Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Link: https://patch.msgid.link/20260216141209.1849200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
decce6
7a3b0a893b drm/radeon: Add HAINAN clock adjustment
[ Upstream commit 908d318f23 ]

This patch limits the clock speeds of the AMD Radeon R5 M420 GPU from
850/1000MHz (core/memory) to 800/950 MHz, making it work stably. This
patch is for radeon.

Signed-off-by: decce6 <decce6@proton.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
Fabian Godehardt
f8431b8672 spi: spidev: fix lock inversion between spi_lock and buf_lock
[ Upstream commit 40534d19ed ]

The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:

  write()/read(): buf_lock -> spi_lock
  ioctl():       spi_lock -> buf_lock

This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:

  WARNING: possible circular locking dependency detected
  spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
  spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
  *** DEADLOCK ***

The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.

Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.

buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.

This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Link: https://patch.msgid.link/20260211072616.489522-1-fg@emlix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
Clay King
b701db9f53 drm/amd/display: bypass post csc for additional color spaces in dal
[ Upstream commit 7d9ec9dc20 ]

[Why]
For RGB BT2020 full and limited color spaces, overlay adjustments were
applied twice (once by MM and once by DAL). This results in incorrect
colours and a noticeable difference between mpo and non-mpo cases.

[How]
Add RGB BT2020 full and limited color spaces to list that bypasses post
csc adjustment.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
decce6
6561e0914a drm/amdgpu: Add HAINAN clock adjustment
[ Upstream commit 49fe2c57bd ]

This patch limits the clock speeds of the AMD Radeon R5 M420 GPU from
850/1000MHz (core/memory) to 800/950 MHz, making it work stably. This
patch is for amdgpu.

Signed-off-by: decce6 <decce6@proton.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
Takashi Iwai
32a1f64f8f ALSA: usb-audio: Update the number of packets properly at receiving
[ Upstream commit cf044e4419 ]

At receiving the packets from the implicit feedback source, we didn't
update ctx->packets field but only the ctx->packet_size[] data.
In exceptional cases, this might lead to unexpectedly superfluous data
transfer (although this won't happen usually due to the nature of USB
isochronous transfer).  Fix it to update the field properly.

Link: https://patch.msgid.link/20260216141209.1849200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:29 -05:00
Ce Sun
2d9cb8a280 drm/amdgpu: Adjust usleep_range in fence wait
[ Upstream commit 3ee1c72606 ]

Tune the sleep interval in the PSP fence wait loop from 10-100us to
60-100us.This adjustment results in an overall wait window of 1.2s
(60us * 20000 iterations) to 2 seconds (100us * 20000 iterations),
which guarantees that we can retrieve the correct fence value

Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:28 -05:00
Wayne Lin
3fb5155a39 drm/amd/display: Avoid updating surface with the same surface under MPO
[ Upstream commit 1a38ded4bc ]

[Why & How]
Although it's dummy updates of surface update for committing stream
updates, we should not have dummy_updates[j].surface all indicating
to the same surface under multiple surfaces case. Otherwise,
copy_surface_update_to_plane() in update_planes_and_stream_state()
will update to the same surface only.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:28 -05:00
Tom Chung
761b208dfa drm/amd/display: Fix system resume lag issue
[ Upstream commit 64c94cd9be ]

[Why]
System will try to apply idle power optimizations setting during
system resume. But system power state is still in D3 state, and
it will cause the idle power optimizations command not actually
to be sent to DMUB and cause some platforms to go into IPS.

[How]
Set power state to D0 first before calling the
dc_dmub_srv_apply_idle_power_optimizations(dm->dc, false)

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:28 -05:00
Alex Hung
9a4483972b drm/amd/display: Fix writeback on DCN 3.2+
[ Upstream commit 9ef84a3075 ]

[WHAT]
1. Set no scaling for writeback as they are hardcoded in DCN3.2+.
2. Set no fast plane update for writeback commits.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:28 -05:00
Thomas Weissschuh
8ec5b52522 ARM: 9467/1: mm: Don't use %pK through printk
[ Upstream commit 012ea376a5 ]

Restricted pointers ("%pK") were never meant to be used
through printk(). They can acquire sleeping locks in atomic contexts.

Switch to %px over the more secure %p as this usage is a debugging aid,
gated behind CONFIG_DEBUG_VIRTUAL and used by WARN().

Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:28 -05:00
Phil Sutter
44c8c02779 include: uapi: netfilter_bridge.h: Cover for musl libc
[ Upstream commit 4edd4ba71c ]

Musl defines its own struct ethhdr and thus defines __UAPI_DEF_ETHHDR to
zero. To avoid struct redefinition errors, user space is therefore
supposed to include netinet/if_ether.h before (or instead of)
linux/if_ether.h. To relieve them from this burden, include the libc
header here if not building for kernel space.

Reported-by: Alyssa Ross <hi@alyssa.is>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:28 -05:00
Yauhen Kharuzhy
09e437ba3f ACPI: x86: Force enabling of PWM2 on the Yogabook YB1-X90
[ Upstream commit a8c9753028 ]

The PWM2 on YB1-X90 tablets is used for keyboard backlight control but
it is disabled in the ACPI DSDT table. Add it to the override_status_ids
list to allow keyboard function control driver
(drivers/platform/x86/lenovo/yogabook.c) to use it.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260211222242.4101162-1-jekhor@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
Kaushlendra Kumar
ecd2fc9e4c thermal: int340x: Fix sysfs group leak on DLVR registration failure
[ Upstream commit 15176b818e ]

When DLVR sysfs group creation fails in proc_thermal_rfim_add(),
the function returns immediately without cleaning up the FIVR group
that may have been created earlier.

Add proper error unwinding to remove the FIVR group before returning
failure.

Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/LV3PR11MB876881B77D32A2854AD2908EF563A@LV3PR11MB8768.namprd11.prod.outlook.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
Ilya Dryomov
1b275bd49e libceph: define and enforce CEPH_MAX_KEY_LEN
[ Upstream commit ac431d597a ]

When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.

The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
ethanwu
a46cec9cc5 ceph: supply snapshot context in ceph_uninline_data()
[ Upstream commit 305ff6b3a0 ]

The ceph_uninline_data function was missing proper snapshot context
handling for its OSD write operations. Both CEPH_OSD_OP_CREATE and
CEPH_OSD_OP_WRITE requests were passing NULL instead of the appropriate
snapshot context, which could lead to unnecessary object clone.

Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
// turn on cephfs inline data
./bin/ceph fs set a inline_data true --yes-i-really-really-mean-it
// allow fs_a client to take snapshot
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
// mount cephfs with fuse, since kernel cephfs doesn't support inline write
ceph-fuse --id fs_a -m 127.0.0.1:40318 --conf ceph.conf -d /mnt/mycephfs/
// bump snapshot seq
mkdir /mnt/mycephfs/.snap/snap1
echo "foo" > /mnt/mycephfs/test
// umount and mount it again using kernel cephfs client
umount /mnt/mycephfs
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
echo "bar" >> /mnt/mycephfs/test
./bin/rados listsnaps -p cephfs.a.data $(printf "%x\n" $(stat -c %i /mnt/mycephfs/test)).00000000

will see this object does unnecessary clone
1000000000a.00000000 (seq:2):
cloneid snaps   size    overlap
2       2       4       []
head    -       8

but it's expected to see
10000000000.00000000 (seq:2):
cloneid snaps   size    overlap
head    -       8

since there's no snapshot between these 2 writes

clone happened because the first osd request CEPH_OSD_OP_CREATE doesn't
pass snap context so object is created with snap seq 0, but later data
writeback is equipped with snapshot context.
snap.seq(1) > object snap seq(0), so osd does object clone.

This fix properly acquiring the snapshot context before performing
write operations.

Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Tested-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
Konstantin Komarov
39aef9080f fs/ntfs3: avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
[ Upstream commit c5226b96c0 ]

When ntfs_read_run_nb_ra() is invoked with run == NULL the code later
assumes run is valid and may call run_get_entry(NULL, ...), and also
uses clen/idx without initializing them. Smatch reported uninitialized
variable warnings and this can lead to undefined behaviour. This patch
fixes it.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512230646.v5hrYXL0-lkp@intel.com/
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
Konstantin Komarov
9b877e5e1c fs/ntfs3: drop preallocated clusters for sparse and compressed files
[ Upstream commit 3a6aba7f3c ]

Do not keep preallocated clusters for sparsed and compressed files.
Preserving preallocation in these cases causes fsx failures when running
with sparse files and preallocation enabled.

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
Jaehun Gou
7ef219656f fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
[ Upstream commit 06909b2549 ]

We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.

A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.

When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.

This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability.

Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:27 -05:00
Jaehun Gou
78b61f7eac fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata
[ Upstream commit 4b90f16e4b ]

We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.

A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.

This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability.

Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Jaehun Gou
398e768d1a fs: ntfs3: check return value of indx_find to avoid infinite loop
[ Upstream commit 1732053c8a ]

We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.

A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.

This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation.

Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
John Garry
0569822bb3 MIPS: Loongson: Make cpumask_of_node() robust against NUMA_NO_NODE
[ Upstream commit d55d3fe2d1 ]

The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which
is a valid index - so add a check for this.

Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Sebastian Andrzej Siewior
f86bee0ef4 iio: magnetometer: Remove IRQF_ONESHOT
[ Upstream commit a54e944092 ]

Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The force-threading functionality is required on PREEMPT_RT because the
handler is using locks with can sleep on PREEMPT_RT.

Remove IRQF_ONESHOT from irqflags.

Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Sebastian Andrzej Siewior
48be615523 iio: Use IRQF_NO_THREAD
[ Upstream commit 04d390af97 ]

The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke
other interrupt handler and this supposed to happen from within the
hardirq.

Use IRQF_NO_THREAD to forbid forced-threading.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Ilpo Järvinen
a4c1546858 mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
[ Upstream commit cefd793fa1 ]

Add Intel Nova Lake-S LPSS PCI IDs.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113172151.48062-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Marcus Folkesson
1fb137d985 Revert "mfd: da9052-spi: Change read-mask to write-mask"
[ Upstream commit 12daa9c195 ]

This reverts commit 2e3378f6c7.

Almost every register in this chip can be customized via OTP
memory. Somehow the value for R19, which decide if the flag is set
on read or write operation, seems to have been overwritten for the chip
the original patch were written for.

Revert the change to follow the default behavior.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://patch.msgid.link/20251124-da9052-revert-v1-1-fbeb2c894002@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Xu Yang
0bfb54195b phy: fsl-imx8mq-usb: disable bind/unbind platform driver feature
[ Upstream commit 27ee0869d7 ]

Disabling PHYs in runtime usually causes the client with external abort
exception or similar issue due to lack of API to notify clients about PHY
removal. This patch removes the possibility to unbind i.MX PHY drivers in
runtime.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260120111712.3159782-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:26 -05:00
Aleksandar Gerasimovski
c435e63530 phy: mvebu-cp110-utmi: fix dr_mode property read from dts
[ Upstream commit e2ce913452 ]

The problem with the current implementation is that it does not consider
that the USB controller can have multiple PHY handles with different
arguments count, as for example we have in our cn9131 based platform:
"phys = <&cp0_comphy1 0>, <&cp0_utmi0>;".

In such case calling "of_usb_get_dr_mode_by_phy" with -1 (no phy-cells)
leads to not proper phy detection, taking the "marvell,cp110-utmi-phy"
dts definition we can call the "of_usb_get_dr_mode_by_phy" with 0
(#phy-cells = <0>) and safely look for that phy.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Link: https://patch.msgid.link/20260106150643.922110-1-aleksandar.gerasimovski@belden.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
Oleksandr Suvorov
5db6da613e watchdog: imx7ulp_wdt: handle the nowayout option
[ Upstream commit d303d37ef5 ]

The module parameter `nowayout` indicates whether the watchdog should ever
be allowed to stop, but the driver currently ignores this option.

Pass the `nowayout` parameter to the watchdog core by setting the
WDOG_NO_WAY_OUT flag accordingly.

Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
Thomas Weißschuh
21cc92fddf binder: don't use %pK through printk
[ Upstream commit 56d2126766 ]

In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d24 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid
this issue. Furthermore, restricted pointers ("%pK") were never meant
to be used through printk(). They can still unintentionally leak raw
pointers or acquire sleeping locks in atomic contexts.

Switch to the regular pointer formatting which is safer and
easier to reason about.

There are still a few users of %pK left, but these use it through
seq_file, for which its usage is safe.

Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260107-restricted-pointers-binder-v1-1-181018bf3812@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
René Rebe
bf66b535da fix it87_wdt early reboot by reporting running timer
[ Upstream commit 88b2ab3464 ]

Some products, such as the Ugreen DXP4800 Plus NAS, ship with the it87
wdt enabled by the firmware and a broken BIOS option that does not
allow to change the time or turn it off. As this makes installing
Linux rather difficult, change the it87_wdt to report it running to
the watchdog core.

Signed-off-by: René Rebe <rene@exactco.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
Moteen Shah
29e9413dfa serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
[ Upstream commit a5fd8945a4 ]

Clear rx_running flag only after DMA teardown polling completes. In the
previous implementation the flag was being cleared while hardware teardown
was still in progress, creating a mismatch between software state
(flag = 0, "ready") and hardware state (still terminating).

Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-3-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
Moteen Shah
aebf83897b serial: 8250: 8250_omap.c: Add support for handling UART error conditions
[ Upstream commit 623b07b370 ]

The DMA IRQ handler does not accounts for the overrun(OE) or any other
errors being reported by the IP before triggering a DMA transaction which
leads to the interrupts not being handled resulting into an IRQ storm.

The way to handle OE is to:
1. Reset the RX FIFO.
2. Read the UART_RESUME register, which clears the internal flag

Earlier, the driver issued DMA transations even in case of OE which shouldn't
be done according to the OE handling mechanism mentioned above, as we are
resetting the FIFO's, refer section: "12.1.6.4.8.1.3.6 Overrun During
Receive" [0].

[0] https://www.ti.com/lit/pdf/spruiu1

Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-2-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
Diksha Kumari
9f70f78e22 staging: rtl8723bs: fix memory leak on failure path
[ Upstream commit abe850d82c ]

cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths.

Signed-off-by: Diksha Kumari <dikshakdevgan@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Link: https://patch.msgid.link/20260113091712.7071-1-dikshakdevgan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:25 -05:00
Mario Peter
1b72b83451 usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
[ Upstream commit cea2a1257a ]

The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.

Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.

The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.

Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists

This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted).

Signed-off-by: Mario Peter <mario.peter@leica-geosystems.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260108165902.795354-1-mario.peter@leica-geosystems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:24 -05:00
Sam Day
f505b91db2 usb: gadget: f_fs: Fix ioctl error handling
[ Upstream commit 8e4c1d0618 ]

When ffs_epfile_ioctl handles FUNCTIONFS_DMABUF_* ioctls, it's currently
falling through when copy_from_user fails.

However, this fallthrough isn't being checked properly, so the handler
continues executing further than it should. It then tries the secondary
dispatch where it ultimately gives up and returns -ENOTTY.

The end result is invalid ioctl invocations will yield a -ENOTTY rather
than an -EFAULT.

It's a common pattern elsewhere in the kernel code to directly return
-EFAULT when copy_from_user fails. So we update ffs_epfile_ioctl to do
the same and fix this issue.

Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-1-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:24 -05:00
Sam Day
3875c8eca2 usb: gadget: f_fs: fix DMA-BUF OUT queues
[ Upstream commit 0145e7acd2 ]

Currently, DMA_FROM_DEVICE is used when attaching DMABUFs to IN
endpoints and DMA_TO_DEVICE for OUT endpoints. This is inverted from
how it should be.

The result is IOMMU read-only mappings placed on OUT queues,
triggering arm-smmu write faults.

Put differently, OUT endpoints flow data from host -> gadget, meaning
the UDC peripheral needs to have write access to the buffer to fill it
with the incoming data.

This commit flips the directions and updates the implicit-sync helpers
so IN endpoints act as readers and OUT endpoints as writers.

Signed-off-by: Sam Day <me@samcday.com>
Tested-by: David Heidelberg <david@ixit.cz>  # OnePlus 6T on sdm845-next-20251119
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-2-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04 07:21:24 -05:00