- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Change the 'ret' variable in ep93xx_uart_clock_init() from unsigned int to
int, as it needs to store either negative error codes or zero.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for Samsung's S2MPG10 PMIC clock, which is similar to the
existing PMIC clocks supported by this driver.
S2MPG10 has three clock outputs @ 32kHz: AP, peri1 and peri2.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Samsung S2MPG10 clock controller is similar to the existing clock
controllers supported by this binding. Register offsets / layout are
slightly different, so it needs its own compatible.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- drop minItems from access-controllers
- remove rcc label from example
- fixes typos
- remove double '::' from 'See also::'
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver is intended for the STM32MP21 clock family.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adds clock and reset binding entries for STM32MP21 SoC family.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A clk lookup using clk_core_lookup() is currently somewhat expensive
since it has to walk the whole clk tree to find a match. This is
extremely bad in the clk_core_init() function where it is used to look
for clk name conflicts, which is always the worst case of walking the
whole tree. Moreover, the number of clks checked increases as more
clks are registered, causing each subsequent clk registration becoming
slower.
Add a hashtable for doing clk lookups to replace the tree walk method.
On arm64 this increases kernel memory usage by 4 KB for the hashtable,
and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a
platform with around 800 clks, this reduces the time spent in
clk_core_lookup() significantly:
| PID 0 | kworker |
| before | after | before | after |
-------------------------------------------
avg | 203 us | 2.7 us | 123 us | 1.5 us |
-------------------------------------------
min | 4.7 us | 2.3 us | 102 us | 0.9 us |
-------------------------------------------
max | 867 us | 4.8 us | 237 us | 3.5 us |
-------------------------------------------
culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms |
This in turn reduces the time spent in clk_hw_register(), and
ultimately, boot time. On a different system with close to 700 clks,
This reduces boot time by around 110 ms. While this doesn't seem like
a lot, this helps in cases where minimizing boot time is important.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk core has its include statements in some random order.
Clean it up before we add more.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This update includes:
- add one clock for sam9x75
- new meaning for MCR register field in clk-master
- use force-write to PLL update register to ensure
reliable programming sequence
- update Analog Control Register (ACR) management to accommodate
differences across SoCs.
- ACR management dependency with one ARM PM patch added beforehand
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCaMr32QAKCRAfOrpwrNPN
DBNwAP9pDeNRFsWCPqGxNuNn3gzUhrPiR8AdyGZzNYx0hFSXEQD+M3VJz0N6E+fz
WMHb8KGiWb6NGw2hVwMOq04fXpcjYgU=
=WcM1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NIfh
-----END PGP SIGNATURE-----
Merge tag 'clk-microchip-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip
Pull Microchip clk driver updates from Nicolas Ferre:
- add one clock for sam9x75
- new meaning for MCR register field in clk-master
- use force-write to PLL update register to ensure
reliable programming sequence
- update Analog Control Register (ACR) management to accommodate
differences across SoCs.
- ACR management dependency with one ARM PM patch added beforehand
* tag 'clk-microchip-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
st/stih407-clock.dtsi file has been removed in commit 65322c1daf51
("clk: st: flexgen: remove unused compatible"). This file has three
compatibles which are now dangling. Remove them from documentation.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Following B2120 boards removal in commit dee546e1ad ("ARM: sti: drop
B2120 board support"), several compatibles are left unused. Remove
them.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Although minimizing the clock rate is the best for most scenarios, as
stated in commit 4d85abb0fb ("clk: bcm: rpi: Enable minimize for all
firmware clocks"), when it comes to the GPU, it's ideal to have the
maximum rate allowed.
Add an option to maximize a firmware clock's rate when the clock is
enabled and set this option for V3D.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently, when we prepare or unprepare RPi's clocks, we don't actually
enable/disable the firmware clock. This means that
`clk_disable_unprepare()` doesn't actually change the clock state at
all, nor does it lowers the clock rate.
From the Mailbox Property Interface documentation [1], we can see that
we should use `RPI_FIRMWARE_SET_CLOCK_STATE` to set the clock state
off/on. Therefore, use `RPI_FIRMWARE_SET_CLOCK_STATE` to create a
prepare and an unprepare hook for RPi's firmware clock.
As now the clocks are actually turned off, some of them are now marked
CLK_IS_CRITICAL, as those are required to be on during the whole system
operation.
Link: https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface [1]
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In contrary to raspberrypi_fw_set_rate(), the ops for is_prepared() and
recalc_rate() silently ignore firmware errors by just returning 0.
Since these operations should never fail, add at least error logs
to inform the user.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Defining i2s_bclk and i2s_sysclk as fixed-rate clocks is insufficient
for real I2S use cases.
Moreover, the current I2S clock configuration does not work as expected
due to missing parent clocks.
This patch adds the missing parent clocks, defines i2s_sysclk as
a DDN clock, and i2s_bclk as a DIV clock.
A special note for i2s_bclk:
From the register definition, the i2s_bclk divider always implies
an additional 1/2 factor.
The following table shows the correspondence between index
and frequency division coefficients:
| index | div |
|-------|-------|
| 0 | 2 |
| 1 | 4 |
| 2 | 6 |
| 3 | 8 |
From a software perspective, introducing i2s_bclk_factor as the
parent of i2s_bclk is sufficient to address the issue.
The I2S-related clock registers can be found here [1].
Link:
https://developer.spacemit.com/documentation?token=LCrKwWDasiJuROkVNusc2pWTnEb
[1]
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Co-developer: Jinmei Wei <weijinmei@linux.spacemit.com>
Suggested-by: Haylen Chu <heylenay@4d2.org>
Signed-off-by: Jinmei Wei <weijinmei@linux.spacemit.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The original DDN operations applied an implicit divide-by-2, which should
not be a default behavior.
This patch removes that assumption, letting each clock define its
actual behavior explicitly.
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Previously, the K1 clock driver did not include the parent clocks of
the I2S sysclk.
Introduce pre-clock to fix I2S clock.
Otherwise, the I2S clock may not work as expected.
This patch adds their definitions to allow proper registration
in the driver and usage in the device tree.
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For some of the SCMI based platforms, the oem extended config may be
supported, but not for duty cycle purpose. Skip the duty cycle ops if
err return when trying to get duty cycle info.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The mt8183-mfgcfg node uses a power domain in its device tree node.
To prevent schema validation warnings, add the optional `power-domains`
property to the binding schema for mediatek syscon clocks.
Fixes: 1781f2c461 ("arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This tag contains two commits that are shared with the soc tree.
In this cycle support for power-of-two single divider clocks was added.
This covers some of the clocks found in the A523 MCU PRCM clock and
reset controller, for which support was added as well.
Besides the new controller, a missing clock was added for the A523's
main clock controller. The RTC clock driver gained specifics for the
A523's RTC block for tweaking the clock rate of the internal oscillator
to get it closer to what the RTC needs.
-----BEGIN PGP SIGNATURE-----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=+HRM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xN6V
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner
Pull Allwinner clk driver updates from Chen-Yu Tsai:
In this cycle support for power-of-two single divider clocks was added.
This covers some of the clocks found in the A523 MCU PRCM clock and
reset controller, for which support was added as well.
Besides the new controller, a missing clock was added for the A523's
main clock controller. The RTC clock driver gained specifics for the
A523's RTC block for tweaking the clock rate of the internal oscillator
to get it closer to what the RTC needs.
* tag 'sunxi-clk-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: add support for the A523/T527 MCU CCU
clk: sunxi-ng: div: support power-of-two dividers
clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
clk: sunxi-ng: sun6i-rtc: Add A523 specifics
Remove default values for PMC PLL Analog Control Register(ACR) as the
values are specific for each SoC and PLL and load them from PLL
characteristics structure
Co-developed-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[nicolas.ferre@microchip.com: fix pll acr write sequence, preserve val]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add the ACR register to all PLL settings and provide the correct
ACR value for each PLL used in different SoCs.
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[nicolas.ferre@microchip.com: add sama7d65 and review commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
A potential divider for the master clock is div/3. The register
configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
method does not work for this case. Checking for MASTER_PRES_MAX will
ensure the correct decimal value is stored in the system.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
This register is important for sequencing the commands to PLLs, so
actually write the update bits with regmap_write_bits() instead of
relying on a read/modify/write regmap command that could skip the actual
hardware write if the value is identical to the one read.
It's changed when modification is needed to the PLL, when
read-only operation is done, we could keep the call to
regmap_update_bits().
Add a comment to the sam9x60_div_pll_set_div() function that uses this
PLL_UPDT register so that it's used consistently, according to the
product's datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <ryan.wanner@microchip.com> # on sama7d65 and sam9x75
Link: https://lore.kernel.org/r/20250827150811.82496-1-nicolas.ferre@microchip.com
[claudiu.beznea: fix "Alignment should match open parenthesis"
checkpatch.pl check]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add a new word in assembly to store ACR value during the calls
to at91_plla_disable/at91_plla_enable macros and use it.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[cristian.birsan@microchip.com: remove ACR_DEFAULT_PLLA loading]
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20250827145427.46819-4-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
- Rework the i.MX95 BLK CTL driver to add the platform data to the
state container.
- Retain the state of the i.MS95 BLK CTL registers through both
runtime and system suspend.
-----BEGIN PGP SIGNATURE-----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=DAZu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hydE
-----END PGP SIGNATURE-----
Merge tag 'clk-imx-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx
Pull i.MX clk driver updates from Abel Vesa:
- Rework the i.MX95 BLK CTL driver to add the platform data to
the state container
- Retain the state of the i.MS95 BLK CTL registers through both
runtime and system suspend
* tag 'clk-imx-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx95-blk-ctl: Save/restore registers when RPM routines are called
clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure
Add "clock-output-names" which is a standard property for clock
providers.
Add the "always-on" boolean property which was undocumented, but
already in use for some time. The flag prevents a clock output from
being disabled.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add DFLL support on Tegra114. This is quite similar to the existing
Tegra124 support and most of the code can be reused, except for the
CVB frequency tables.
-----BEGIN PGP SIGNATURE-----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=Tlrh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PzHP
-----END PGP SIGNATURE-----
Merge tag 'for-6.18-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra
Pull Tegra clk driver updates from Thierry Reding:
- Add DFLL support on Tegra114
This is quite similar to the existing Tegra124 support and most
of the code can be reused, except for the CVB frequency tables.
* tag 'for-6.18-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: dfll: Add CVB tables for Tegra114
clk: tegra: Add DFLL DVCO reset control for Tegra114
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
Extend the Tegra124 DFLL driver to include configuration settings
required for Tegra114 compatibility.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: Use TEGRA210 instead of T210]
Signed-off-by: Thierry Reding <treding@nvidia.com>
1. Tesla FSD: Expose CSI clocks to consumers (DTS).
2. Exynos990:
- Few fixes for fixed factor clocks, register widths and proper PLL
parents.
- Add four more clocks for the DPU and HSI0 clock for USB.
- Add PERIC0 and PERIC1 clock controllers (CMU), responsible for
providing clocks to serial engines.
3. Add seven clock controllers for the new Axis ARTPEC-8 SoC. The SoC
shares all main blocks, including the clock controllers, with Samsung
SoC, so same drivers and bindings are used.
4. Cleanups: switch to determine_rate().
-----BEGIN PGP SIGNATURE-----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=xwPz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/ryf
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung
Pull Samsung SoC clk driver updates from Krzysztof Kozlowski:
- Tesla FSD: Expose CSI clocks to consumers (DTS)
- Exynos990:
- Few fixes for fixed factor clocks, register widths and proper PLL
parents
- Add four more clocks for the DPU and HSI0 clock for USB
- Add PERIC0 and PERIC1 clock controllers (CMU), responsible for
providing clocks to serial engines
- Add seven clock controllers for the new Axis ARTPEC-8 SoC. The SoC
shares all main blocks, including the clock controllers, with Samsung
SoC, so same drivers and bindings are used.
- Cleanups: switch to clk_ops::determine_rate()
* tag 'samsung-clk-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support
dt-bindings: clock: exynos990: Add PERIC0 and PERIC1 clock units
clk: samsung: exynos990: Add missing USB clock registers to HSI0
clk: samsung: exynos990: Add LHS_ACEL gate clock for HSI0 and update CLK_NR_TOP
dt-bindings: clock: exynos990: Add LHS_ACEL clock ID for HSI0 block
clk: samsung: artpec-8: Add initial clock support for ARTPEC-8 SoC
clk: samsung: Add clock PLL support for ARTPEC-8 SoC
dt-bindings: clock: Add ARTPEC-8 clock controller
clk: samsung: exynos990: Add DPU_BUS and CMUREF mux/div and update CLKS_NR_TOP
dt-bindings: clock: exynos990: Extend clocks IDs
clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks
clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths
clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes
clk: samsung: pll: convert from round_rate() to determine_rate()
clk: samsung: cpu: convert from round_rate() to determine_rate()
clk: samsung: fsd: Add clk id for PCLK and PLL in CAM_CSI block
dt-bindings: clock: Add CAM_CSI clock macro for FSD
Updates for the T-HEAD TH1520 clock controller:
- Describe gate clocks with clk_gate so that clock gates can be clock
parents. This is similar to the mux clock refactor in 54edba916e
("clk: thead: th1520-ap: Describe mux clocks with clk_mux").
- Add support for enabling/disabling PLLs. Some PLLs are put into a
disabled state by the bootloader, and clock driver now has the
ability to enable them.
- Set all AXI clocks to CLK_IS_CRITICAL. The AXI crossbar of TH1520 has
no proper timeout handling, which means gating AXI clocks can easily
lead to bus timeout and hang the system. All these clock gates are
ungated by default on system reset.
- Convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to
prevent unwanted clock gating.
- Fix parent of padctrl0 clock, fix parent of DPU pixel clocks and
support changing DPU pixel clock rate.
All changes have been tested in linux-next.
Signed-off-by: Drew Fustini <fustini@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCaLyCaAAKCRDb7CzD2Six
DOqYAQD0Dgfa/m5U/Yl9Is0JfCya0HXh1XybdB+onzmP5+08MwD/c2obQc/GvvTg
L1PiERh+ggUI70WCVuDq1/roqnFpcg4=
=QZvM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GJwW
-----END PGP SIGNATURE-----
Merge tag 'thead-clk-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into clk-thead
Pull T-HEAD clock driver updates from Drew Fustini:
- Describe gate clocks with clk_gate so that clock gates can be clock
parents. This is similar to the mux clock refactor in 54edba916e
("clk: thead: th1520-ap: Describe mux clocks with clk_mux").
- Add support for enabling/disabling PLLs. Some PLLs are put into a
disabled state by the bootloader, and clock driver now has the
ability to enable them.
- Set all AXI clocks to CLK_IS_CRITICAL. The AXI crossbar of TH1520 has
no proper timeout handling, which means gating AXI clocks can easily
lead to bus timeout and hang the system. All these clock gates are
ungated by default on system reset.
- Convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to
prevent unwanted clock gating.
- Fix parent of padctrl0 clock, fix parent of DPU pixel clocks and
support changing DPU pixel clock rate.
* tag 'thead-clk-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL
clk: thead: support changing DPU pixel clock rate
clk: thead: add support for enabling/disabling PLLs
clk: thead: Correct parent for DPU pixel clocks
clk: thead: th1520-ap: fix parent of padctrl0 clock
clk: thead: th1520-ap: describe gate clocks with clk_gate
The A523/T527 SoCs have a new MCU PRCM, which has more clocks and reset
controls for the RISC-V MCU and other peripherals. There is a second
audio PLL, but no bus clock dividers. The BSP driver uses the 24MHz main
oscillator as the parent for all the bus clocks. But the diagram
suggests busses from the other PRCM are used in this block as well.
Add a driver to support this part. Unlike the BSP driver, the SoC's main
MBUS clock is chosen as the parent for the MCU MBUS clock, and the
latter then serves as the parent of the MCU DMA controller's MBUS clock.
The bus gate clocks also use their respective bus clocks as parents
according to the system bus tree diagram. In cases where a block does
not appear in that diagram, an educated guess is made.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Some clocks (for timers) on the A523 are mux-divider-gate types
with the divider being values of power-of-two.
Add a macro for these types of clocks so that we can use the divider
types instead of the M-P types without an M divider.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.
Also, merge the private header back into the driver code itself. The
header only contains a macro containing the total number of clocks.
This has to be updated every time a missing clock gets added. Having
it in a separate file doesn't help the process. Instead just drop the
macro, and thus the header no longer has any reason to exist.
Also move the .num value to after the list of clks to make it obvious
that it should be updated when new clks are added.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
There are four clock controllers in the A523 SoC. The existing binding
already covers two of them that are critical for basic operation. The
remaining ones are the MCU clock controller and CPU PLL clock
controller.
Add a description for the MCU CCU. This unit controls and provides
clocks to the MCU (RISC-V) subsystem and peripherals meant to operate
under low power conditions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250911174710.3149589-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>