mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
1,427,003 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
b9c8fc2cae |
Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth: bnxt_en: fix deleting of Ntuple filters
- eth: wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- eth: xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth: mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- eth: gve: fix incorrect buffer cleanup for QPL
- eth: team: avoid NETDEV_CHANGEMTU event when unregistering slave
- eth: usb: validate USB endpoints
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=HBOu
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
||
|
|
baed0d9ba9 |
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len().
Fixes:
|
||
|
|
8a5752c6dc |
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ...
Fixes:
|
||
|
|
7aa767d0d3 |
net: consume xmit errors of GSO frames
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link).
Link: https://lore.kernel.org/CANn89iJcLepEin7EtBETrZ36bjoD9LrR=k4cfwWh046GB+4f9A@mail.gmail.com
Fixes:
|
||
|
|
f0a2f2aadb |
Merge branch 'vsock-add-write-once-semantics-to-child_ns_mode'
Bobby Eshleman says: ==================== vsock: add write-once semantics to child_ns_mode Two administrator processes may race when setting child_ns_mode: one sets it to "local" and creates a namespace, but another changes it to "global" in between. The first process ends up with a namespace in the wrong mode. Make child_ns_mode write-once so that a namespace manager can set it once, check the value, and be guaranteed it won't change before creating its namespaces. Writing a different value after the first write returns -EBUSY. One patch for the implementation, one for docs, and one for tests. v2: https://lore.kernel.org/r/20260218-vsock-ns-write-once-v2-0-19e4c50d509a@meta.com v1: https://lore.kernel.org/r/20260217-vsock-ns-write-once-v1-1-a1fb30f289a9@meta.com ==================== Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-0-c0cde6959923@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
b6302e057f |
vsock: document write-once behavior of the child_ns_mode sysctl
Update the vsock child_ns_mode documentation to include the new write-once semantics of setting child_ns_mode. The semantics are implemented in a preceding patch in this series. Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-3-c0cde6959923@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
102eab95f0 |
vsock: lock down child_ns_mode as write-once
Two administrator processes may race when setting child_ns_mode as one
process sets child_ns_mode to "local" and then creates a namespace, but
another process changes child_ns_mode to "global" between the write and
the namespace creation. The first process ends up with a namespace in
"global" mode instead of "local". While this can be detected after the
fact by reading ns_mode and retrying, it is fragile and error-prone.
Make child_ns_mode write-once so that a namespace manager can set it
once and be sure it won't change. Writing a different value after the
first write returns -EBUSY. This applies to all namespaces, including
init_net, where an init process can write "local" to lock all future
namespaces into local mode.
Fixes:
|
||
|
|
a382a34276 |
selftests/vsock: change tests to respect write-once child ns mode
The child_ns_mode sysctl parameter becomes write-once in a future patch in this series, which breaks existing tests. This patch updates the tests to respect this new policy. No additional tests are added. Add "global-parent" and "local-parent" namespaces as intermediaries to spawn namespaces in the given modes. This avoids the need to change "child_ns_mode" in the init_ns. nsenter must be used because ip netns unshares the mount namespace so nested "ip netns add" breaks exec calls from the init ns. Adds nsenter to the deps check. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com> Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-1-c0cde6959923@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
97f87e5788 |
Merge branch 'mlx5-misc-fixes-2026-02-24'
Tariq Toukan says: ==================== mlx5 misc fixes 2026-02-24 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20260224114652.1787431-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
859380694f |
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430
Fixes:
|
||
|
|
60253042c0 |
net/mlx5: Fix missing devlink lock in SRIOV enable error path
The cited commit miss to add locking in the error path of
mlx5_sriov_enable(). When pci_enable_sriov() fails,
mlx5_device_disable_sriov() is called to clean up. This cleanup function
now expects to be called with the devlink instance lock held.
Add the missing devl_lock(devlink) and devl_unlock(devlink)
Fixes:
|
||
|
|
d7073e8b97 |
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
The cited commit introduced MLX5_PRIV_FLAGS_SWITCH_LEGACY to identify
when a transition to legacy mode is requested via devlink. However, the
logic failed to clear this flag if the mode was subsequently changed
back to MLX5_ESWITCH_OFFLOADS (switchdev). Consequently, if a user
toggled from legacy to switchdev, the flag remained set, leaving the
driver with wrong state indicating
Fix this by explicitly clearing the MLX5_PRIV_FLAGS_SWITCH_LEGACY bit
when the requested mode is MLX5_ESWITCH_OFFLOADS.
Fixes:
|
||
|
|
bd7b9f83fb |
net/mlx5: LAG, disable MPESW in lag_disable_change()
mlx5_lag_disable_change() unconditionally called mlx5_disable_lag() when
LAG was active, which is incorrect for MLX5_LAG_MODE_MPESW.
Hnece, call mlx5_disable_mpesw() when running in MPESW mode.
Fixes:
|
||
|
|
2700b7e603 |
net/mlx5: DR, Fix circular locking dependency in dump
Fix a circular locking dependency between dbg_mutex and the domain
rx/tx mutexes that could lead to a deadlock.
The dump path in dr_dump_domain_all() was acquiring locks in the order:
dbg_mutex -> rx.mutex -> tx.mutex
While the table/matcher creation paths acquire locks in the order:
rx.mutex -> tx.mutex -> dbg_mutex
This inverted lock ordering creates a circular dependency. Fix this by
changing dr_dump_domain_all() to acquire the domain lock before
dbg_mutex, matching the order used in mlx5dr_table_create() and
mlx5dr_matcher_create().
Lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.19.0-rc6net_next_e817c4e #1 Not tainted
------------------------------------------------------
sos/30721 is trying to acquire lock:
ffff888102df5900 (&dmn->info.rx.mutex){+.+.}-{4:4}, at:
dr_dump_start+0x131/0x450 [mlx5_core]
but task is already holding lock:
ffff888102df5bc0 (&dmn->dump_info.dbg_mutex){+.+.}-{4:4}, at:
dr_dump_start+0x10b/0x450 [mlx5_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&dmn->dump_info.dbg_mutex){+.+.}-{4:4}:
__mutex_lock+0x91/0x1060
mlx5dr_matcher_create+0x377/0x5e0 [mlx5_core]
mlx5_cmd_dr_create_flow_group+0x62/0xd0 [mlx5_core]
mlx5_create_flow_group+0x113/0x1c0 [mlx5_core]
mlx5_chains_create_prio+0x453/0x2290 [mlx5_core]
mlx5_chains_get_table+0x2e2/0x980 [mlx5_core]
esw_chains_create+0x1e6/0x3b0 [mlx5_core]
esw_create_offloads_fdb_tables.cold+0x62/0x63f [mlx5_core]
esw_offloads_enable+0x76f/0xd20 [mlx5_core]
mlx5_eswitch_enable_locked+0x35a/0x500 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x561/0x950 [mlx5_core]
devlink_nl_eswitch_set_doit+0x67/0xe0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x188/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x1ed/0x2c0
netlink_sendmsg+0x210/0x450
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x70/0xd00
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (&dmn->info.tx.mutex){+.+.}-{4:4}:
__mutex_lock+0x91/0x1060
mlx5dr_table_create+0x11d/0x530 [mlx5_core]
mlx5_cmd_dr_create_flow_table+0x62/0x140 [mlx5_core]
__mlx5_create_flow_table+0x46f/0x960 [mlx5_core]
mlx5_create_flow_table+0x16/0x20 [mlx5_core]
esw_create_offloads_fdb_tables+0x136/0x240 [mlx5_core]
esw_offloads_enable+0x76f/0xd20 [mlx5_core]
mlx5_eswitch_enable_locked+0x35a/0x500 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x561/0x950 [mlx5_core]
devlink_nl_eswitch_set_doit+0x67/0xe0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x188/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x1ed/0x2c0
netlink_sendmsg+0x210/0x450
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x70/0xd00
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (&dmn->info.rx.mutex){+.+.}-{4:4}:
__lock_acquire+0x18b6/0x2eb0
lock_acquire+0xd3/0x2c0
__mutex_lock+0x91/0x1060
dr_dump_start+0x131/0x450 [mlx5_core]
seq_read_iter+0xe3/0x410
seq_read+0xfb/0x130
full_proxy_read+0x53/0x80
vfs_read+0xba/0x330
ksys_read+0x65/0xe0
do_syscall_64+0x70/0xd00
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dmn->dump_info.dbg_mutex);
lock(&dmn->info.tx.mutex);
lock(&dmn->dump_info.dbg_mutex);
lock(&dmn->info.rx.mutex);
*** DEADLOCK ***
Fixes:
|
||
|
|
6668c6f2dd |
A good number of fixes:
- cfg80211:
- cancel rfkill work appropriately
- fix radiotap parsing to correctly reject field 18
- fix wext (yes...) off-by-one for IGTK key ID
- mac80211:
- fix for mesh NULL pointer dereference
- fix for stack out-of-bounds (2 bytes) write on
specific multi-link action frames
- set default WMM parameters for all links
- mwifiex: check dev_alloc_name() return value correctly
- libertas: fix potential timer use-after-free
- brcmfmac: fix crash on probe failure
-----BEGIN PGP SIGNATURE-----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=VLWl
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-02-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A good number of fixes:
- cfg80211:
- cancel rfkill work appropriately
- fix radiotap parsing to correctly reject field 18
- fix wext (yes...) off-by-one for IGTK key ID
- mac80211:
- fix for mesh NULL pointer dereference
- fix for stack out-of-bounds (2 bytes) write on
specific multi-link action frames
- set default WMM parameters for all links
- mwifiex: check dev_alloc_name() return value correctly
- libertas: fix potential timer use-after-free
- brcmfmac: fix crash on probe failure
* tag 'wireless-2026-02-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
wifi: mac80211: set default WMM parameters on all links
wifi: libertas: fix use-after-free in lbs_free_adapter()
wifi: mwifiex: Fix dev_alloc_name() return value check
wifi: brcmfmac: Fix potential kernel oops when probe fails
wifi: radiotap: reject radiotap with unknown bits
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
wifi: cfg80211: wext: fix IGTK key ID off-by-one
====================
Link: https://patch.msgid.link/20260225113159.360574-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
|
77da71283c |
Merge branch 'team-fix-reference-count-leak-when-changing-port-netns'
Ido Schimmel says: ==================== team: Fix reference count leak when changing port netns Patch #1 fixes a reference count leak that was reported by syzkaller. The leak happens when a net device that is member in a team is changing netns. The fix is to align the team driver with the bond driver and have it suppress NETDEV_CHANGEMTU events for a net device that is being unregistered. Without this change, the NETDEV_CHANGEMTU event causes inetdev_event() to recreate an inet device for this net device in its original netns, after it was previously destroyed upon NETDEV_UNREGISTER. Later on, when inetdev_event() receives a NETDEV_REGISTER event for this net device in the new nents, it simply leaks the reference: case NETDEV_REGISTER: pr_debug("%s: bug\n", __func__); RCU_INIT_POINTER(dev->ip_ptr, NULL); break; addrconf_notify() handles this differently and reuses the existing inet6 device if one exists when a NETDEV_REGISTER event is received. This creates a different problem where it is possible for a net device to reference an inet6 device that was created in a previous netns. A more generic fix that we can try in net-next is to revert the changes in the bond and team drivers and instead have IPv4 and IPv6 destroy and recreate an inet device if one already exists upon NETDEV_REGISTER. Patch #2 adds a selftest that passes with the fix and hangs without it. ==================== Link: https://patch.msgid.link/20260224125709.317574-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
58f8ef625e |
selftests: team: Add a reference count leak test
Add a test for the issue that was fixed in "team: avoid NETDEV_CHANGEMTU event when unregistering slave". The test hangs due to a reference count leak without the fix: # make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests [...] TAP version 13 1..1 # timeout set to 45 # selftests: drivers/net/team: refleak.sh [ 50.681299][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3 [ 71.185325][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3 And passes with the fix: # make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests [...] TAP version 13 1..1 # timeout set to 45 # selftests: drivers/net/team: refleak.sh ok 1 selftests: drivers/net/team: refleak.sh Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20260224125709.317574-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
bb4c698633 |
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit
|
||
|
|
f975a09552 |
net: mana: Fix double destroy_workqueue on service rescan PCI path
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK>
Fixes:
|
||
|
|
916864e5ed |
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
Replace Vinod Koul with Mohd Ayaan Anwar as the maintainer of the QUALCOMM ETHQOS ETHERNET DRIVER. Vinod confirmed he is no longer active in this area and agreed to be removed. Acked-by: Vinod Koul <vkoul@kernel.org> Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20260224-qcom_ethqos_maintainer-v1-1-24e02701ea52@oss.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
676c7af91f |
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
The devm_add_action_or_reset() function already executes the cleanup
action on failure before returning an error, so the explicit goto error
and subsequent zl3073x_dev_dpll_fini() call causes double cleanup.
Fixes:
|
||
|
|
7c9db1a1cd |
Merge branch 'tcp-re-enable-acceptance-of-fin-packets-when-rwin-is-0'
Simon Baatz says: ==================== tcp: re-enable acceptance of FIN packets when RWIN is 0 this series restores the ability to accept in‑sequence FIN packets even when the advertised receive window is zero, and adds a packetdrill test to guard the behavior. ==================== Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-0-a16677ea7cea@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
7451133230 |
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
Add a packetdrill test that verifies we accept bare FIN packets when the advertised receive window is zero. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-2-a16677ea7cea@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
1e3bb184e9 |
tcp: re-enable acceptance of FIN packets when RWIN is 0
Commit |
||
|
|
5cc619583c |
vsock: Use container_of() to get net namespace in sysctl handlers
current->nsproxy is should not be accessed directly as syzbot has found that it could be NULL at times, causing crashes. Fix up the af_vsock sysctl handlers to use container_of() to deal with the current net namespace instead of attempting to rely on current. This is the same type of change done in commit |
||
|
|
4b063c002c |
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes:
|
||
|
|
c58b6c29a4 |
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes:
|
||
|
|
11de1d3ae5 |
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints. Cc: Petko Manolov <petkan@nucleusys.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026022347-legibly-attest-cc5c@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
12133a483d |
nfc: pn533: properly drop the usb interface reference on disconnect
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes:
|
||
|
|
f4d0ec0aa2 |
Changes since last update:
- Do not share the page cache if the real @aops differs - Fix the incomplete condition for interlaced plain extents - Get rid of more unnecessary #ifdefs -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEQ0A6bDUS9Y+83NPFUXZn5Zlu5qoFAmmfTnURHHhpYW5nQGtl cm5lbC5vcmcACgkQUXZn5Zlu5qpHtxAAou7+1fkfdKyU6OWc+lqwlieUV5MRLkFS TMt6Byg/RP6jsSANE10NcefgT2yENEQeSoMRi4/B4ljQT6XQ0IPKGuSp6ckbhTl9 QgWT1Lka9WWgkqG+Wlg3W0cuv2ULzyGnufqqeRt/DRvbv1GEv42MsWBc/BDA2Hp3 38IRX2wmg1dsK9yQoPyblEfFYRWtLwMLQnefM4EQa5P6IBp2295jokHi9IL22Bni r6zeV6sF45+fodqqaPOOq70/UvhkeCBrfF2M/49k5C2OQHjcer+TKz6/sAPoRH9Q zdltmwivm9b9jduH29WnvEAGjUAmQQuAUnivr2BhNUVPjttGjEjd0L5uwMZ673XP m/YlMn10CxcrH8aiiqRAOWaewSxvYfpiWpE0/r220k6mj73qQuocdi/Jl9b/6olX 2VK64PxB4E015Xo0M0A06WNGFPg1W7HS0fEp9IMgfT9Tu7dHmPHHc+SlLCVVN2XI 1pmQeccGtL8jcuxVmLTq4MM2AQYMWBBNbSJbJuC8GAulpjPJhSbW4qJgKuqMbwvU Yf7LvVS6Rt18jqpbKR5nVPl21cpoQG+vsPxIazLcUEq9vwoZGGNlMiWgR7q0A6cr u/uRn5vJzR689wulZyEPRT13r0S5ZmLiUhmFGYeUE3JEz3RnOuDdTss77+4AAOHI 4VsmwKwv490= =QpbC -----END PGP SIGNATURE----- Merge tag 'erofs-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - Do not share the page cache if the real @aops differs - Fix the incomplete condition for interlaced plain extents - Get rid of more unnecessary #ifdefs * tag 'erofs-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix interlaced plain identification for encoded extents erofs: remove more unnecessary #ifdefs erofs: allow sharing page cache with the same aops only |
||
|
|
d9d32e5bd5 |
ata fixes for 7.0-rc2
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, forgot to consider the case where the deferred QC
times out. Fix the code to take timeouts into consideration, which
avoids a use after free (Damien)
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, when unloading the module, calls cancel_work_sync(),
a function that can sleep, while holding a spin lock. Move the function
call outside the lock (Damien)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCaZ8EIgAKCRDJZDGjmcZN
cpRxAPwIr05t8DBcuSHXbxexUUtgk3uZ27yirTd1fnDHPJDwjgD+JuquvSZD0Kjv
sofEpFt6h7sGrExF+dz9wl9rMsehGwk=
=BNkD
-----END PGP SIGNATURE-----
Merge tag 'ata-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, forgot to consider the case where the deferred QC
times out. Fix the code to take timeouts into consideration, which
avoids a use after free (Damien)
- The newly introduced feature that issues a deferred (non-NCQ) command
from a workqueue, when unloading the module, calls cancel_work_sync(),
a function that can sleep, while holding a spin lock. Move the function
call outside the lock (Damien)
* tag 'ata-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: fix cancellation of a port deferred qc work
ata: libata-eh: correctly handle deferred qc timeouts
|
||
|
|
0e335a7745 |
vfs-7.0-rc2.fixes
Please consider pulling these changes from the signed vfs-7.0-rc2.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaZ7xWAAKCRCRxhvAZXjc
onpeAP4qOrTURIAX9M/NGCHywvjI91ZJt20J6vm0X6KbVV/ebQD/eoJ21xzPhG9M
gN7oRcZ9SW3e/AdtdnlqB0PEP+cyGwM=
=9Ji+
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix an uninitialized variable in file_getattr().
The flags_valid field wasn't initialized before calling
vfs_fileattr_get(), triggering KMSAN uninit-value reports in fuse
- Fix writeback wakeup and logging timeouts when DETECT_HUNG_TASK is
not enabled.
sysctl_hung_task_timeout_secs is 0 in that case causing spurious
"waiting for writeback completion for more than 1 seconds" warnings
- Fix a null-ptr-deref in do_statmount() when the mount is internal
- Add missing kernel-doc description for the @private parameter in
iomap_readahead()
- Fix mount namespace creation to hold namespace_sem across the mount
copy in create_new_namespace().
The previous drop-and-reacquire pattern was fragile and failed to
clean up mount propagation links if the real rootfs was a shared or
dependent mount
- Fix /proc mount iteration where m->index wasn't updated when
m->show() overflows, causing a restart to repeatedly show the same
mount entry in a rapidly expanding mount table
- Return EFSCORRUPTED instead of ENOSPC in minix_new_inode() when the
inode number is out of range
- Fix unshare(2) when CLONE_NEWNS is set and current->fs isn't shared.
copy_mnt_ns() received the live fs_struct so if a subsequent
namespace creation failed the rollback would leave pwd and root
pointing to detached mounts. Always allocate a new fs_struct when
CLONE_NEWNS is requested
- fserror bug fixes:
- Remove the unused fsnotify_sb_error() helper now that all callers
have been converted to fserror_report_metadata
- Fix a lockdep splat in fserror_report() where igrab() takes
inode::i_lock which can be held in IRQ context.
Replace igrab() with a direct i_count bump since filesystems
should not report inodes that are about to be freed or not yet
exposed
- Handle error pointer in procfs for try_lookup_noperm()
- Fix an integer overflow in ep_loop_check_proc() where recursive calls
returning INT_MAX would overflow when +1 is added, breaking the
recursion depth check
- Fix a misleading break in pidfs
* tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: avoid misleading break
eventpoll: Fix integer overflow in ep_loop_check_proc()
proc: Fix pointer error dereference
fserror: fix lockdep complaint when igrabbing inode
fsnotify: drop unused helper
unshare: fix unshare_fs() handling
minix: Correct errno in minix_new_inode
namespace: fix proc mount iteration
mount: hold namespace_sem across copy in create_new_namespace()
iomap: Describe @private in iomap_readahead()
statmount: Fix the null-ptr-deref in do_statmount()
writeback: Fix wakeup and logging timeouts for !DETECT_HUNG_TASK
fs: init flags_valid before calling vfs_fileattr_get
|
||
|
|
4a2d046e4b |
erofs: fix interlaced plain identification for encoded extents
Only plain data whose start position and on-disk physical length are
both aligned to the block size should be classified as interlaced
plain extents. Otherwise, it must be treated as shifted plain extents.
This issue was found by syzbot using a crafted compressed image
containing plain extents with unaligned physical lengths, which can
cause OOB read in z_erofs_transform_plain().
Reported-and-tested-by: syzbot+d988dc155e740d76a331@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/699d5714.050a0220.cdd3c.03e7.GAE@google.com
Fixes:
|
||
|
|
2f61f38a21 |
net: stmmac: fix timestamping configuration after suspend/resume
When stmmac_init_timestamping() is called, it clears the receive and
transmit path booleans that allow timestamps to be read. These are
never re-initialised until after userspace requests timestamping
features to be enabled.
However, our copy of the timestamp configuration is not cleared, which
means we return the old configuration to userspace when requested.
This is inconsistent. Fix this by clearing the timestamp configuration.
Fixes:
|
||
|
|
bfbc0b5b32 |
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
|
1348659dc9 |
bluetooth pull request for net:
- purge error queues in socket destructors - hci_sync: Fix CIS host feature condition - L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ - L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short - L2CAP: Fix response to L2CAP_ECRED_CONN_REQ - L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ - L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ - hci_qca: Cleanup on all setup failures -----BEGIN PGP SIGNATURE----- iQJNBAABCgA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmmcw1EZHGx1aXoudm9u LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKUTyD/4jtQwDrveC19zamF5n7lFY Oils6eftANcLFzLwTrMqGO7IxESga4qdNOf2vc/UgVSUfNqsPIUJ5El+LzpXZXAa sYBP/KudEX53CfU3fEVyPTUaWkZ4CdMRZeiCmgXqW7GxYbGw92SFuaSIHAP6Ep4s Z7Ryd1H0xhX9QPMc4g4IgoMiBiKzNs4GtlLSbDJcivAtbC/34nkMOxK9g+1DbU0F qzW+oPfYCpPzXTf20I1QIAMt5smnSM3Tuvo9u2pZRuEGpKjENxeY4hdAejfjeKA6 RLWXm6JvMP2lUBT68plMQQdYyQ8DxG75sVjgSoQYIu2YTVnsX76t/kD2hhiHXH/Y nQoy4dtA1/5V7Ka0cfMhcvino4Rb9Gh3dsFKJOuWRT+aTY+gNhpyr56SuJh24Y3C 7tUeEDI4fBkJGaRAbreVbaI5vw4kbSfi7IDOM/ccWDSLaG8HGaLOtn0IU8q4AgMa IkYzB5zwtiyM/zaSTO1k0HkpjR0wwftnTd+Fj2mUWdTwSeek64R9enmKYmg5UJrv 14yhfLHFsbAQo+o1B3ZslnCdYQJpgFmyAInV6Jpunc78IE9+g/YA55K22JbDDSzI t9Zy25OWLyYZyuD1PzDkMlYU5OARNYeyRXbJ3w037LrpqRoEuFsK0qTmgi+kR9C7 VR9IpCqgf4SJbL7ge83H8g== =JBaa -----END PGP SIGNATURE----- Merge tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - purge error queues in socket destructors - hci_sync: Fix CIS host feature condition - L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ - L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short - L2CAP: Fix response to L2CAP_ECRED_CONN_REQ - L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ - L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ - hci_qca: Cleanup on all setup failures * tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ Bluetooth: L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ Bluetooth: Fix CIS host feature condition Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQ Bluetooth: hci_qca: Cleanup on all setup failures Bluetooth: purge error queues in socket destructors Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ ==================== Link: https://patch.msgid.link/20260223211634.3800315-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
fb73d0e19f |
MAINTAINERS: Update AMD XGBE driver maintainers
Due to additional responsibilities, Shyam Sundar S K will no longer be supporting the AMD XGBE driver. Maintenance will be handled by Raju Rangoju going forward. Cc: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20260223074020.1987884-1-Shyam-sundar.S-k@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
c8dbdc6e38 |
net: phy: register phy led_triggers during probe to avoid AB-BA deadlock
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock.
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Closes: https://lore.kernel.org/all/OS7PR01MB13602B128BA1AD3FA38B6D1FFBC69A@OS7PR01MB13602.jpnprd01.prod.outlook.com/
Fixes:
|
||
|
|
4a1ddb0f1c |
pidfs: avoid misleading break
The break would only break out of the scoped_guard() loop, not the switch statement. It still works correct as is ofc but let's avoid the confusion. Reported-by: David Lechner <dlechner@baylibre.com> Link:: https://lore.kernel.org/cd2153f1-098b-463c-bbc1-5c6ca9ef1f12@baylibre.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
|
3d7e6ce34f |
net: usb: pegasus: enable basic endpoint checking
pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time, and avoid triggering assertion. Similar fix to - commit |
||
|
|
bf4fde7db4 |
erofs: remove more unnecessary #ifdefs
Many #ifdefs can be replaced with IS_ENABLED() to improve code readability. No functional changes. Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> |
||
|
|
983512f3a8 |
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes:
|
||
|
|
82aec772fc |
netconsole: avoid OOB reads, msg is not nul-terminated
msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit |
||
|
|
bae8a5d2e7 |
net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800aad1080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800aad1100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fix this by ensuring that both fst_tx_task and fst_int_task are properly
canceled before the fst_card_info is released. Add tasklet_kill() in
fst_remove_one() to synchronize with any pending or running tasklets.
Since unregister_hdlc_device() stops data transmission and reception,
and fst_disable_intr() prevents further interrupts, it is appropriate
to place tasklet_kill() after these calls.
The bugs were identified through static analysis. To reproduce the issue
and validate the fix, a FarSync T-series card was simulated in QEMU and
delays(e.g., mdelay()) were introduced within the tasklet handler to
increase the likelihood of triggering the race condition.
Fixes:
|
||
|
|
fdcfce9307 |
eventpoll: Fix integer overflow in ep_loop_check_proc()
If a recursive call to ep_loop_check_proc() hits the `result = INT_MAX`,
an integer overflow will occur in the calling ep_loop_check_proc() at
`result = max(result, ep_loop_check_proc(ep_tovisit, depth + 1) + 1)`,
breaking the recursion depth check.
Fix it by using a different placeholder value that can't lead to an
overflow.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes:
|
||
|
|
021fd0f870 |
net/rds: fix recursive lock in rds_tcp_conn_slots_available
syzbot reported a recursive lock warning in rds_tcp_get_peer_sport() as
it calls inet6_getname() which acquires the socket lock that was already
held by __release_sock().
kworker/u8:6/2985 is trying to acquire lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
but task is already holding lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_sock_set_cork+0x2c/0x2e0 net/ipv4/tcp.c:3694
lock_sock_nested+0x48/0x100 net/core/sock.c:3780
lock_sock include/net/sock.h:1709 [inline]
inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
rds_tcp_get_peer_sport net/rds/tcp_listen.c:70 [inline]
rds_tcp_conn_slots_available+0x288/0x470 net/rds/tcp_listen.c:149
rds_recv_hs_exthdrs+0x60f/0x7c0 net/rds/recv.c:265
rds_recv_incoming+0x9f6/0x12d0 net/rds/recv.c:389
rds_tcp_data_recv+0x7f1/0xa40 net/rds/tcp_recv.c:243
__tcp_read_sock+0x196/0x970 net/ipv4/tcp.c:1702
rds_tcp_read_sock net/rds/tcp_recv.c:277 [inline]
rds_tcp_data_ready+0x369/0x950 net/rds/tcp_recv.c:331
tcp_rcv_established+0x19e9/0x2670 net/ipv4/tcp_input.c:6675
tcp_v6_do_rcv+0x8eb/0x1ba0 net/ipv6/tcp_ipv6.c:1609
sk_backlog_rcv include/net/sock.h:1185 [inline]
__release_sock+0x1b8/0x3a0 net/core/sock.c:3213
Reading from the socket struct directly is safe from possible paths. For
rds_tcp_accept_one(), the socket has just been accepted and is not yet
exposed to concurrent access. For rds_tcp_conn_slots_available(), direct
access avoids the recursive deadlock seen during backlog processing
where the socket lock is already held from the __release_sock().
However, rds_tcp_conn_slots_available() is also called from the normal
softirq path via tcp_data_ready() where the lock is not held. This is
also safe because inet_dport is a stable 16 bits field. A READ_ONCE()
annotation as the value might be accessed lockless in a concurrent
access context.
Note that it is also safe to call rds_tcp_conn_slots_available() from
rds_conn_shutdown() because the fan-out is disabled.
Fixes:
|
||
|
|
017c179252 |
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes:
|
||
|
|
3aa677625c |
tipc: fix duplicate publication key in tipc_service_insert_publ()
TIPC uses named table to store TIPC services represented by type and
instance. Each time an application calls TIPC API bind() to bind a
type/instance to a socket, an entry is created and inserted into the
named table. It looks like this:
named table:
key1, entry1 (type, instance ...)
key2, entry2 (type, instance ...)
In the above table, each entry represents a route for sending data
from one socket to the other. For all publications originated from
the same node, the key is UNIQUE to identify each entry.
It is calculated by this formula:
key = socket portid + number of bindings + 1 (1)
where:
- socket portid: unique and calculated by using linux kernel function
get_random_u32_below(). So, the value is randomized.
- number of bindings: the number of times a type/instance pair is bound
to a socket. This number is linearly increased,
starting from 0.
While the socket portid is unique and randomized by linux kernel, the
linear increment of "number of bindings" in formula (1) makes "key" not
unique anymore. For example:
- Socket 1 is created with its associated port number 20062001. Type 1000,
instance 1 is bound to socket 1:
key1: 20062001 + 0 + 1 = 20062002
Then, bind() is called a second time on Socket 1 to by the same type 1000,
instance 1:
key2: 20062001 + 1 + 1 = 20062003
Named table:
key1 (20062002), entry1 (1000, 1 ...)
key2 (20062003), entry2 (1000, 1 ...)
- Socket 2 is created with its associated port number 20062002. Type 1000,
instance 1 is bound to socket 2:
key3: 20062002 + 0 + 1 = 20062003
TIPC looks up the named table and finds out that key2 with the same value
already exists and rejects the insertion into the named table.
This leads to failure of bind() call from application on Socket 2 with error
message EINVAL "Invalid argument".
This commit fixes this issue by adding more port id checking to make sure
that the key is unique to publications originated from the same port id
and node.
Fixes:
|
||
|
|
4cfe066a82 |
dpll: zl3073x: fix REF_PHASE_OFFSET_COMP register width for some chip IDs
The REF_PHASE_OFFSET_COMP register is 48-bit wide on most zl3073x chip
variants, but only 32-bit wide on chip IDs 0x0E30, 0x0E93..0x0E97 and
0x1F60. The driver unconditionally uses 48-bit read/write operations,
which on 32-bit variants causes reading 2 bytes past the register
boundary (corrupting the value) and writing 2 bytes into the adjacent
register.
Fix this by storing the chip ID in the device structure during probe
and adding a helper to detect the affected variants. Use the correct
register width for read/write operations and the matching sign extension
bit (31 vs 47) when interpreting the phase compensation value.
Fixes:
|
||
|
|
ca220141fa |
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa
Reported-by: syzbot+52624bdfbf2746d37d70@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000269a1405a12fdc77@google.com/T/
Fixes:
|