Commit graph

361,447 commits

Author SHA1 Message Date
Paul Gortmaker
ba3fb10221 liquidio: fix implicit irq include causing build failures
To fix

In file included from drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:24:0:
drivers/net/ethernet/cavium/liquidio/octeon_device.h:216:2: error: expected specifier-qualifier-list before ‘irqreturn_t’
  irqreturn_t (*process_interrupt_regs)(void *);
  ^

as seen on arm64 allmodconfig builds.

Cc: Derek Chickles <derek.chickles@caviumnetworks.com>
Cc: Satanand Burla <satananda.burla@caviumnetworks.com>
Cc: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Cc: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 16:26:27 -07:00
Wu Fengguang
1bb79284fc netvsc: fix ptr_ret.cocci warnings
drivers/net/hyperv/netvsc_drv.c:737:8-14: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 9749fed5d4 ("netvsc: use ERR_PTR to avoid dereference issues")
CC: stephen hemminger <stephen@networkplumber.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 16:20:06 -07:00
Ido Schimmel
4a3c67a6e7 mlxsw: spectrum_router: Don't batch neighbour deletion
Current firmware supported by the driver doesn't support batch deletion
of IPv6 neighbours on a given router interface (RIF).

Until a new version that supports this functionality is made available,
delete neighbours one by one.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 16:16:20 -07:00
Sabrina Dubroca
04584957b5 geneve/vxlan: offload ports on register/unregister events
This improves consistency of handling when moving a netdev to another
netns. Most drivers currently do a full reset when the device goes up,
so that will flush the offload state anyway.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:52:59 -07:00
Sabrina Dubroca
2d2b13fcff geneve/vxlan: add support for NETDEV_UDP_TUNNEL_DROP_INFO
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:52:59 -07:00
Girish Moodalbail
5b861f6baa geneve: add rtnl changelink support
This patch adds changelink rtnl operation support for geneve devices
and the code changes involve:

  - added geneve_quiesce() which quiesces the geneve device data path
    for both TX and RX. This lets us perform the changelink operation
    atomically w.r.t data path. Also added geneve_unquiesce() to
    reverse the operation of geneve_quiesce().

  - refactor geneve_newlink into geneve_nl2info to be used by both
    geneve_newlink and geneve_changelink

  - geneve_nl2info takes a changelink boolean argument to isolate
    changelink checks.

  - Allow changing only a few attributes (ttl, tos, and remote tunnel
    endpoint IP address (within the same address family)):
    - return -EOPNOTSUPP for attributes that cannot be changed for
      now. Incremental patches can make the non-supported one
      available in the future if needed.

Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:51:05 -07:00
Rob Herring
f7ce91038d net: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:41:48 -07:00
Jason Wang
3f93522ffa virtio-net: switch off offloads on demand if possible on XDP set
Current XDP implementation wants guest offloads feature to be disabled
on device. This is inconvenient and means guest can't benefit from
offloads if XDP is not used. This patch tries to address this
limitation by disabling the offloads on demand through control guest
offloads. Guest offloads will be disabled and enabled on demand on XDP
set.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:37:00 -07:00
Jason Wang
4941d472bf virtio-net: do not reset during XDP set
We currently reset the device during XDP set, the main reason is
that we allocate more headroom with XDP (for header adjustment).

This works but causes network downtime for users.

Previous patches encoded the headroom in the buffer context,
this makes it possible to detect the case where a buffer
with headroom insufficient for XDP is added to the queue and
XDP is enabled afterwards.

Upon detection, we handle this case by copying the packet
(slow, but it's a temporary condition).

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:37:00 -07:00
Jason Wang
192f68cf35 virtio-net: switch to use new ctx API for small buffer
Use ctx API to store headroom for small buffers.
Following patches will retrieve this info and use it for XDP.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:37:00 -07:00
Jason Wang
28b39bc7c5 virtio-net: pack headroom into ctx for mergeable buffers
Pack headroom into ctx - this way when we get a buffer we can figure out
the actual headroom that was allocated for the buffer. Will be helpful
to optimize switching between XDP and non-XDP modes which have different
headroom requirements.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:37:00 -07:00
Jason Wang
87646a348e virtio_ring: allow to store zero as the ctx
Allow zero to be store as a ctx, with this we could store e.g zero
value which could be meaningful for the case of storing headroom
through ctx.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 13:37:00 -07:00
David S. Miller
7a68ada6ec Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-07-21 03:38:43 +01:00
Linus Torvalds
96080f6977 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) BPF verifier signed/unsigned value tracking fix, from Daniel
    Borkmann, Edward Cree, and Josef Bacik.

 2) Fix memory allocation length when setting up calls to
    ->ndo_set_mac_address, from Cong Wang.

 3) Add a new cxgb4 device ID, from Ganesh Goudar.

 4) Fix FIB refcount handling, we have to set it's initial value before
    the configure callback (which can bump it). From David Ahern.

 5) Fix double-free in qcom/emac driver, from Timur Tabi.

 6) A bunch of gcc-7 string format overflow warning fixes from Arnd
    Bergmann.

 7) Fix link level headroom tests in ip_do_fragment(), from Vasily
    Averin.

 8) Fix chunk walking in SCTP when iterating over error and parameter
    headers. From Alexander Potapenko.

 9) TCP BBR congestion control fixes from Neal Cardwell.

10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.

11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
    Wang.

12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
    from Gao Feng.

13) Cannot release skb->dst in UDP if IP options processing needs it.
    From Paolo Abeni.

14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
    Levin and myself.

15) Revert some rtnetlink notification changes that are causing
    regressions, from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
  net: bonding: Fix transmit load balancing in balance-alb mode
  rds: Make sure updates to cp_send_gen can be observed
  net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
  ipv4: initialize fib_trie prior to register_netdev_notifier call.
  rtnetlink: allocate more memory for dev_set_mac_address()
  net: dsa: b53: Add missing ARL entries for BCM53125
  bpf: more tests for mixed signed and unsigned bounds checks
  bpf: add test for mixed signed and unsigned bounds checks
  bpf: fix up test cases with mixed signed/unsigned bounds
  bpf: allow to specify log level and reduce it for test_verifier
  bpf: fix mixed signed/unsigned derived min/max value bounds
  ipv6: avoid overflow of offset in ip6_find_1stfragopt
  net: tehuti: don't process data if it has not been copied from userspace
  Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
  net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
  dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
  NET: dwmac: Make dwmac reset unconditional
  net: Zero terminate ifr_name in dev_ifname().
  wireless: wext: terminate ifr name coming from userspace
  netfilter: fix netfilter_net_init() return
  ...
2017-07-20 16:33:39 -07:00
Kosuke Tatsukawa
cbf5ecb305 net: bonding: Fix transmit load balancing in balance-alb mode
balance-alb mode used to have transmit dynamic load balancing feature
enabled by default.  However, transmit dynamic load balancing no longer
works in balance-alb after commit 8b426dc54c ("bonding: remove
hardcoded value").

Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to
send packets.  This function uses the parameter tlb_dynamic_lb.
tlb_dynamic_lb used to have the default value of 1 for balance-alb, but
now the value is set to 0 except in balance-tlb.

Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb
for balance-alb similar to balance-tlb.

Fixes: 8b426dc54c ("bonding: remove hardcoded value")
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:34:40 -07:00
Ganesh Goudar
760446f967 cxgb4: display serial config and vpd versions
print the versions of vpd and serial configuration file,
flashed to adapter, and cleanup the relevant code.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:29:29 -07:00
Keerthy
070f9c658a net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
Push the request_irq function to the end of probe so as
to ensure all the required fields are populated in the event
of an ISR getting executed right after requesting the irq.

Currently while loading the crash kernel a crash was seen as
soon as devm_request_threaded_irq was called. This was due to
n->poll being NULL which is called as part of net_rx_action
function.

Suggested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:28:54 -07:00
Florian Fainelli
be35e8c516 net: dsa: b53: Add missing ARL entries for BCM53125
The BCM53125 entry was missing an arl_entries member which would
basically prevent the ARL search from terminating properly. This switch
has 4 ARL entries, so add that.

Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:21:54 -07:00
Linus Torvalds
63a8636213 Power management fixes for v4.13-rc2
- Fix the average CPU load computations in the intel_pstate driver
    on Knights Landing (Xeon Phi) processors that require an extra
    factor to compensate for a rate change differences between the
    TSC and MPERF which is missing (Srinivas Pandruvada).
 
  - Fix an initialization ordering issue in the generic power domains
    (genpd) framework (Sudeep Holla).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZcR+XAAoJEILEb/54YlRxxeMP/0jSKXDbZzCm+CnMwteRf28/
 NISgVVxKdacdMrWhTVZnNVMxpMMJWQLn4xIxvJghw2UoRscW3zFzHtz71B/bhSh/
 VGW0U7sHdHBFWwFCByEu/fy0UZddQsUAsaOzjR7xnmCd7D7KOyu4AVl6QjQywmWL
 cmG19Vh6mFnIjBlhmlAHCP+sGb2AawPgUch1jvsP3lB1hh38DP21cXjULLTd1jFK
 Fd/h5w0n8vhlrLkXiDMDdsQEp+Xxo49s7GSCyEC75BHzEjrxnp3TV/fvbuHkUEr6
 phZm4uCmuzLo06OPJdJDyix1jk1DDi8ZY1Xb8iIjQuVF0FOYrH1K5+IclWj2fsmL
 hfl6XiiQsyt6H+wN/XmpQ7nMV56y2Pj4wEEl3lrfE7/00CUmOgSBZ9MKjas/PgUx
 Eof8bscZu750xya1yTZ02ZYUmtGod+aEn5OXqJXV4QGT12kh0T6T3sRkH5AssZyU
 bZsTPBB5tLuoybVUsPKa4SazFbtfZmFZhg4U6iMFHhEVmzl+6ZZjI1aWYP1O8mZ2
 sJhZHhI9LIHC0RX4OPFAGwjHG/2uTmBXOS8auzTRxCkYiudK6vRt7QZLV5lzwYFA
 U89cMo+3iHAy7Rh5wgG9gkwtZE2cfk+/6xMr4ED6omBsI2bsiy7Svy0+aoE8zQRG
 pWkDWbuuFBd2+MJ69U8/
 =ORNK
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These are two stable-candidate fixes for the intel_pstate driver and
  the generic power domains (genpd) framework.

  Specifics:

   - Fix the average CPU load computations in the intel_pstate driver on
     Knights Landing (Xeon Phi) processors that require an extra factor
     to compensate for a rate change differences between the TSC and
     MPERF which is missing (Srinivas Pandruvada).

   - Fix an initialization ordering issue in the generic power domains
     (genpd) framework (Sudeep Holla)"

* tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
  cpufreq: intel_pstate: Correct the busy calculation for KNL
2017-07-20 14:56:46 -07:00
Linus Torvalds
ae1c908517 libnvdimm for 4.13-rc2
* Fix handling of media errors that span a sector
 
 * Fix support of multiple namespaces in a libnvdimm region being in
   device-dax mode
 
 * Clean up the machine check notifier properly when the nfit driver
   fails to register
 
 * Address a static analysis (smatch) report in device-dax
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZcL/cAAoJEB7SkWpmfYgCJCMQAKwvhvauCQJnVgYjdd9/nANv
 r3jz+xgBhRVY4RzostkkQ1MQWx50G5KXhHhSjIz3GAztZb64THCi9k0XNW9oBwcv
 Go8/j0/th5iUEKmBs2WzIXOjbBvzC4IsT4hUHS0c66iLeEFggiYj78/CzqrJiH5f
 85DsCXhgxxGJ70RtTa080Pocst9IY9Ut0OrLo8WMiDUGnDd4FCV4JJDgQ3aUlG12
 nn8xwokPk0d+pgQy0iWghxKJ/zIpmE/rrPQFFVxaBR9IrOHEFwFWav2v6IwOuUEF
 ZK+ERiI+I07WPTZ9n8RBfu/aYlN/TKD33jDoZwkaNvJJptGdrpU/Y4aitQbXVxev
 M+tTQ0ggDMUHQ4Da8axu76zDlECqcou+/MgOwU2rYwW2DAOluGHlhje8rIdmQiOL
 nvzIa35xRD7eKVe6viEsKaNhCpsc8O/b4LIMXlKX+QmoSbvQCoOz0EDzcqT9oufe
 ItE5CFGx1IqQ4bQCgWiRop+Ly2vp4kTfLK2FNV0Zq+imaIdrVJxgUJP5GWH6yy/Z
 lQsaxzx8AZTN44Mns4SRxgJJp11fDBsqwPXG4hdY4GMUZG2hyscPt8rBNlHDOANf
 2rhVPZbefAlv12WWehQ8JXk+/l0sNqxQJfz0kfG72i0Ll6Ua6Isqy7Zs0fFZXT0C
 CFrXq4FMB0D4pvFi6b5i
 =s1pb
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-fixes-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A handful of small fixes for 4.13-rc2. Three of these fixes are tagged
  for -stable. They have all appeared in at least one -next release with
  no reported issues

   - Fix handling of media errors that span a sector

   - Fix support of multiple namespaces in a libnvdimm region being in
     device-dax mode

   - Clean up the machine check notifier properly when the nfit driver
     fails to register

   - Address a static analysis (smatch) report in device-dax"

* tag 'libnvdimm-fixes-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix sysfs duplicate warnings
  MAINTAINERS: list drivers/acpi/nfit/ files for libnvdimm sub-system
  acpi/nfit: Fix memory corruption/Unregister mce decoder on failure
  device-dax: fix 'passing zero to ERR_PTR()' warning
  libnvdimm: fix badblock range handling of ARS range
2017-07-20 10:17:53 -07:00
Linus Torvalds
c6efb4548d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:

 - HID multitouch 4.12 regression fix from Dmitry Torokhov

 - error handling fix for HID++ driver from Gustavo A. R. Silva

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return value
  HID: multitouch: do not blindly set EV_KEY or EV_ABS bits
2017-07-20 10:14:54 -07:00
Rafael J. Wysocki
ffa64d5e0d Merge branches 'intel_pstate' and 'pm-domains'
* intel_pstate:
  cpufreq: intel_pstate: Correct the busy calculation for KNL

* pm-domains:
  PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
2017-07-20 18:57:15 +02:00
Gustavo A. R. Silva
929b60a85b HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return value
Check return value from call to devm_kmemdup() in order to prevent a NULL
pointer dereference.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-20 15:45:39 +02:00
Colin Ian King
1e6c22aef2 net: tehuti: don't process data if it has not been copied from userspace
The array data is only populated with valid information from userspace
if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on
the stack. The subsequent switch statement acts on a subcommand in
data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which
seems incorrect to me.  Instead, just return EOPNOTSUPP for the case
where cmd == SIOCDEVPRIVATE to avoid this issue.

As a side note, I suspect that the original intention of the code
was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the
current logic is reversed). However, I don't wont to change the current
semantics in case any userspace code relies on this existing behaviour.

Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:48:02 -07:00
Arjun Vynipadath
04d8980b4a cxgb4: Update register ranges of T4/T5/T6 adapters
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:27:03 -07:00
Martin Hundebøll
bb0a2675f7 net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
Commit f39908d3b1 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390
ports 9 & 10') added support for setting the CMODE for the 6390X family,
but only enabled it for 9290 and 6390 - and left out 6390X.

Fix support for setting the CMODE on 6390X also by assigning
mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in
mv88e6390x_ops too.

Fixes: f39908d3b1 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10")
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:26:01 -07:00
stephen hemminger
3962981f48 netvsc: add rtnl annotations in rndis
The rndis functions are used when changing device state.
Therefore the references from network device to internal state
are protected by RTNL mutex.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
35fbbccfb4 netvsc: save pointer to parent netvsc_device in channel table
Keep back pointer in the per-channel data structure to
avoid any possible RCU related issues when napi poll is
called but netvsc_device is in RCU limbo.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
2a926f7912 netvsc: need rcu_derefence when accessing internal device info
The netvsc_device structure should be accessed by rcu_dereference
in the send path.  Change arguments to netvsc_send() to make
this easier to do correctly.

Remove no longer needed hv_device_to_netvsc_device.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
9749fed5d4 netvsc: use ERR_PTR to avoid dereference issues
The rndis_filter_device_add function is called both in
probe context and RTNL context,and creates the netvsc_device
inner structure. It is easier to get the RTNL lock annotation
correct if it returns the object directly, rather than implicitly
by updating network device private data.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
ea383bf146 netvsc: change logic for change mtu and set_queues
Use device detach/attach to ensure that no packets are handed
to device during state changes. Call rndis_filter_open/close
directly as part of later VF related changes.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
a5e1ec3833 netvsc: change order of steps in setting queues
This fixes the error unwind logic for incorrect number of queues.
If netif_set_real_num_XX_queues failed then rndis_filter_device_add
would have been called twice. Since input arguments are already
ranged checked this is a hypothetical only problem, not possible
in actual code.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
79e8cbe7a7 netvsc: add some rtnl_dereference annotations
In a couple places RTNL is held, and the netvsc_device pointer
is acquired without annotation.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
1b01994aa6 netvsc: force link update after MTU change
If two MTU changes are in less than update interval (2 seconds),
then the netvsc network device may get stuck with no carrier.

The netvsc driver debounces link status events which is fine
for unsolicited updates, but blocks getting the update after
down/up from MTU reinitialization.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 22:20:05 -07:00
stephen hemminger
4a614dd3e5 hns: remove useless void cast
There is no need to cast away return value of dev_close.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:45:04 -07:00
Gustavo A. R. Silva
eb2b987426 liquidio: lio_main: remove unnecessary static in setup_io_queues()
Remove unnecessary static on local variables cpu_id_modulus and cpu_id.
Such variables are initialized before being used, on every execution
path throughout the function. The static has no benefit and, removing
it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a significant difference in the object
file size. Also, there is a significant difference in the bss segment.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  78689   15272   27808  121769   1dba9 drivers/net/ethernet/cavium/liquidio/lio_main.o

after:
   text    data     bss     dec     hex filename
  78667   15128   27680  121475   1da83 drivers/net/ethernet/cavium/liquidio/lio_main.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Gustavo A. R. Silva
93fe07e52e liquidio: lio_vf_main: remove unnecessary static in setup_io_queues()
Remove unnecessary static on local variables cpu_id_modulus and cpu_id.
Such variables are initialized before being used, on every execution
path throughout the function. The static has no benefit and, removing
it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a significant difference in the object
file size. Also, there is a significant difference in the bss segment.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  55656   10680     576   66912   10560 drivers/net/ethernet/cavium/liquidio/lio_vf_main.o

after:
   text    data     bss     dec     hex filename
  55796   10536     448   66780   104dc drivers/net/ethernet/cavium/liquidio/lio_vf_main.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Gustavo A. R. Silva
f03b06f3ba net: ethernet: mediatek: remove useless code in mtk_poll_tx()
Remove useless local variable _condition_ and the code related.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Gustavo A. R. Silva
048578a195 qlcnic: remove unnecessary static in qlcnic_dump_fw()
Remove unnecessary static on local variable fw_dump_ops.
Such variable is initialized before being used, on every
execution path throughout the function. The static has no
benefit and, removing it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a difference in the object file size.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  19032    2136      64   21232    52f0 drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.o

after:
   text    data     bss     dec     hex filename
  19020    2048       0   21068    524c drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Gustavo A. R. Silva
648e8b86d0 net: tulip: remove useless code in tulip_init_one()
Remove useless local variable multiport_cnt and the code related.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Gustavo A. R. Silva
f55dda4bde rtlwifi: remove useless code
Remove useless local variables last_read_point and last_txw_point and
the code related.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Gustavo A. R. Silva
06548fbb60 wireless: airo: remove unnecessary static in writerids()
Remove unnecessary static on local function pointer _writer_.
Such pointer is initialized before being used, on every
execution path throughout the function. The static has no
benefit and, removing it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:

before:
   text    data     bss     dec     hex filename
 113797   19152    1216  134165   20c15 drivers/net/wireless/cisco/airo.o

after:
   text	   data	    bss	    dec	    hex	filename
 113881	  19096	   1152	 134129	  20bf1	drivers/net/wireless/cisco/airo.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:33:57 -07:00
Andy Shevchenko
eeef1713ca ISDN: eicon: switch to use native bitmaps
Two arrays are clearly bit maps, so, make that explicit by converting to
bitmap API and remove custom helpers.

Note sig_ind() uses out of boundary bit to (looks like) protect against
potential bitmap_empty() checks for the same bitmap.

This patch removes that since:
1) that didn't guarantee atomicity anyway;
2) the first operation inside the for-loop is set bit in the bitmap
   (which effectively makes it non-empty);
3) group_optimization() doesn't utilize possible emptiness of the bitmap
   in question.

Thus, if there is a protection needed it should be implemented properly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:24:59 -07:00
Martin Habets
9b17010da5 sfc: Add ethtool -m support for QSFP modules
This also adds support for non-QSFP modules attached to QSFP.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 16:23:28 -07:00
Eugeniy Paltsev
90f522a20e NET: dwmac: Make dwmac reset unconditional
Unconditional reset dwmac before HW init if reset controller is present.

In existing implementation we reset dwmac only after second module
probing:
(module load -> unload -> load again [reset happens])

Now we reset dwmac at every module load:
(module load [reset happens] -> unload -> load again [reset happens])

Also some reset controllers have only reset callback instead of
assert + deassert callbacks pair, so handle this case.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 13:52:19 -07:00
Rick Farrington
2c4aac74a9 liquidio: lowmem: init allocated memory to 0
For defensive programming, zero the allocated block 'oct->droq[0]' in
octeon_setup_output_queues() and 'oct->instr_queue[0]' in
octeon_setup_instr_queues().

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 13:24:46 -07:00
Rick Farrington
689062a18c liquidio: lowmem: do not dereference null ptr
Don't dereference a NULL ptr in octeon_droq_destroy_ring_buffers().

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 13:24:46 -07:00
Rick Farrington
00587f2fa7 liquidio: lowmem: init allocated memory to 0
Fix GPF in octeon_init_droq(); zero the allocated block 'recv_buf_list'.
This prevents a GPF trying to access an invalid 'recv_buf_list[i]' entry
in octeon_droq_destroy_ring_buffers() if init didn't alloc all entries.

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 13:24:46 -07:00
Rick Farrington
741912c553 liquidio: support new firmware statistic fw_err_pki
Added support for new firmware statistic 'tx_err_pki'.

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19 13:22:29 -07:00
Sudeep Holla
975e83cfb8 PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach
may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets
the PM domain for the device unconditionally.

When subsequent attempts are made to call genpd_dev_pm_attach, it may
return -EEXISTS checking dev->pm_domain without re-attempting to call
attach_dev or power_on.

platform_drv_probe then attempts to call drv->probe as the return value
-EEXIST != -EPROBE_DEFER, which may end up in a situation where the
device is accessed without it's power domain switched on.

Fixes: f104e1e5ef (PM / Domains: Re-order initialization of generic_pm_domain_data)
Cc: 4.4+ <stable@vger.kernel.org> # v4.4+
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-19 14:41:11 +02:00