In trace.c, the function trace_create_maxlat_file() is defined behind the
#ifdef CONFIG_TRACER_MAX_TRACE block. The #else part defines it as:
#define trace_create_maxlat_file(tr, d_tracer) \
trace_create_file("tracing_max_latency", TRACE_MODE_WRITE, \
d_tracer, tr, &tracing_max_lat_fops)
But the one place that it it used has:
#ifdef CONFIG_TRACER_MAX_TRACE
trace_create_maxlat_file(tr, d_tracer);
#endif
Which is pointless and also wrong!
It only gets created when both CONFIG_TRACE_MAX_TRACE and CONFIG_FS_NOTIFY
is defined, but the file itself should not be dependent on
CONFIG_FS_NOTIFY. Always create that file when TRACE_MAX_TRACE is defined
regardless if FS_NOTIFY is or is not.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260207191101.0e014abd@robin
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracing_set_filter_buffering() is only used in
trace_events_hist.c. Move it to that file and make it static.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260206195936.617080218@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the triggers were first created, they may not have had a file
parameter passed to them and things needed to be done generically.
But today, all triggers have a file parameter passed to them. Remove the
generic code and add a "if (WARN_ON_ONCE(!file))" to each trigger.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260206101351.609d8906@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the 'kprobe_event=' kernel command-line parameter is not provided,
there is no need to execute setup_boot_kprobe_events().
This change optimizes the initialization function init_kprobe_trace()
by skipping unnecessary work and effectively prevents potential blocking
that could arise from contention on the event_mutex lock in subsequent
operations.
Link: https://patch.msgid.link/20260204015401.163748-1-tianyaxiong@kylinos.cn
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The init_blk_tracer() function causes significant boot delay as it
waits for the trace_event_sem lock held by trace_event_update_all().
Specifically, its child function register_trace_event() requires
this lock, which is occupied for an extended period during boot.
To resolve this, the execution of primary init_blk_tracer() is moved
to the trace_init_wq workqueue, allowing it to run asynchronously,
and prevent blocking the main boot thread.
Link: https://patch.msgid.link/20260204015353.163331-1-tianyaxiong@kylinos.cn
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The eval_map_work_func() function, though queued in eval_map_wq,
holds the trace_event_sem read-write lock for a long time during
kernel boot. This causes blocking issues for other functions.
Rename eval_map_wq to trace_init_wq and make it global, thereby
allowing other parts of tracing to schedule work on this queue
asynchronously and avoiding blockage of the main boot thread.
Link: https://patch.msgid.link/20260204015344.162818-1-tianyaxiong@kylinos.cn
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a appropriate kerneldoc to trace_event_buffer_reserve() to make it
easier to understand how that function is used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260130103745.1126e4af@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The current use of guard(preempt_notrace)() within __DECLARE_TRACE()
to protect invocation of __DO_TRACE_CALL() means that BPF programs
attached to tracepoints are non-preemptible. This is unhelpful in
real-time systems, whose users apparently wish to use BPF while also
achieving low latencies. (Who knew?)
One option would be to use preemptible RCU, but this introduces
many opportunities for infinite recursion, which many consider to
be counterproductive, especially given the relatively small stacks
provided by the Linux kernel. These opportunities could be shut down
by sufficiently energetic duplication of code, but this sort of thing
is considered impolite in some circles.
Therefore, use the shiny new SRCU-fast API, which provides somewhat faster
readers than those of preemptible RCU, at least on Paul E. McKenney's
laptop, where task_struct access is more expensive than access to per-CPU
variables. And SRCU-fast provides way faster readers than does SRCU,
courtesy of being able to avoid the read-side use of smp_mb(). Also,
it is quite straightforward to create srcu_read_{,un}lock_fast_notrace()
functions.
Link: https://lore.kernel.org/all/20250613152218.1924093-1-bigeasy@linutronix.de/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.499701982@kernel.org
Co-developed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
SRCU-fast is designed to be used in NMI handlers, even going so far
as to use atomic operations for architectures supporting NMIs but not
providing NMI-safe per-CPU atomic operations. However, the WARN_ON_ONCE()
in __srcu_check_read_flavor() complains if SRCU-fast is used in an NMI
handler. This commit therefore modifies that WARN_ON_ONCE() to avoid
such complaints.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://patch.msgid.link/8232efe8-a7a3-446c-af0b-19f9b523b4f7@paulmck-laptop
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order to switch the protection of tracepoint callbacks from
preempt_disable() to srcu_read_lock_fast() the BPF callback from
tracepoints needs to have migration prevention as the BPF programs expect
to stay on the same CPU as they execute. Put together the RCU protection
with migration prevention and use rcu_read_lock_dont_migrate() in
__bpf_trace_run(). This will allow tracepoints callbacks to be
preemptible.
Link: https://lore.kernel.org/all/CAADnVQKvY026HSFGOsavJppm3-Ajm-VsLzY-OeFUe+BaKMRnDg@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.335034877@kernel.org
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation to convert protection of tracepoints from being protected
by a preempt disabled section to being protected by SRCU, have all the
perf callbacks disable preemption as perf expects preemption to be
disabled when processing tracepoints.
While at it, convert the perf system call callback preempt_disable() to a
guard(preempt).
Link: https://lore.kernel.org/all/20250613152218.1924093-1-bigeasy@linutronix.de/
Link: https://patch.msgid.link/20260108220550.2f6638f3@fedora
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260126231256.174621257@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
I realized that these files were never listed in MAINTAINERS when they
were added in commit ad37bcd965 ("rust: add tracepoint support").
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260127-jump-label-rust-maintainers-v2-1-11b7c30b11d9@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The macros ENABLE_EVENT_STR and DISABLE_EVENT_STR were added to trace.h so
that more than one file can have access to them, but was never removed
from their original location. Remove the duplicates.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260126130037.4ba201f9@gandalf.local.home
Fixes: d0bad49bb0 ("tracing: Add enable_hist/disable_hist triggers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Recording stacktraces is very useful, but the size of 16 deep is very
restrictive. For example, in seeing where tasks schedule out in a non
running state, the following can be used:
~# cd /sys/kernel/tracing
~# echo 'hist:keys=common_stacktrace:vals=hitcount if prev_state & 3' > events/sched/sched_switch/trigger
~# cat events/sched/sched_switch/hist
[..]
{ common_stacktrace:
__schedule+0xdc0/0x1860
schedule+0x27/0xd0
schedule_timeout+0xb5/0x100
wait_for_completion+0x8a/0x140
xfs_buf_iowait+0x20/0xd0 [xfs]
xfs_buf_read_map+0x103/0x250 [xfs]
xfs_trans_read_buf_map+0x161/0x310 [xfs]
xfs_btree_read_buf_block+0xa0/0x120 [xfs]
xfs_btree_lookup_get_block+0xa3/0x1e0 [xfs]
xfs_btree_lookup+0xea/0x530 [xfs]
xfs_alloc_fixup_trees+0x72/0x570 [xfs]
xfs_alloc_ag_vextent_size+0x67f/0x800 [xfs]
xfs_alloc_vextent_iterate_ags.constprop.0+0x52/0x230 [xfs]
xfs_alloc_vextent_start_ag+0x9d/0x1b0 [xfs]
xfs_bmap_btalloc+0x2af/0x680 [xfs]
xfs_bmapi_allocate+0xdb/0x2c0 [xfs]
} hitcount: 1
[..]
The above stops at 16 functions where knowing more would be useful. As the
allocated storage for stacks is the same for strings, and that size is 256
bytes, there is a lot of space not being used for stacktraces.
16 * 8 = 128
Up the size to 31 (it requires the last slot to be zero, so it can't be 32).
Also change the BUILD_BUG_ON() to allow the size of the stacktrace storage
to be equal to the max size. One slot is used to hold the number of
elements in the stack.
BUILD_BUG_ON((HIST_STACKTRACE_DEPTH + 1) * sizeof(long) >= STR_VAR_LEN_MAX);
Change that from ">=" to just ">", as now they are equal.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260123105415.2be26bf4@gandalf.local.home
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When debugging the synthetic events, being able to function trace its
functions is very useful (now that CONFIG_FUNCTION_SELF_TRACING is
available). For some reason trace_event_raw_event_synth() was marked as
"notrace", which was totally unnecessary as all of the tracing directory
had function tracing disabled until the recent FUNCTION_SELF_TRACING was
added.
Remove the notrace annotation from trace_event_raw_event_synth() as
there's no reason to not trace it when tracing synthetic event functions.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260122204526.068a98c9@gandalf.local.home
Acked-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, each trace event has a
"hist_debug" file that explains the histogram internal data. This is very
useful for debugging histograms.
One bit of data that was missing from this file was what function a
histogram field uses to process its data. The hist_field structure now has
a fn_num that is used by a switch statement in hist_fn_call() to call a
function directly (to avoid spectre mitigations).
Instead of displaying that number, create a string array that maps to the
histogram function enums so that the function for a field may be
displayed:
~# cat /sys/kernel/tracing/events/sched/sched_switch/hist_debug
[..]
hist_data: 0000000043d62762
n_vals: 2
n_keys: 1
n_fields: 3
val fields:
hist_data->fields[0]:
flags:
VAL: HIST_FIELD_FL_HITCOUNT
type: u64
size: 8
is_signed: 0
function: hist_field_counter()
hist_data->fields[1]:
flags:
HIST_FIELD_FL_VAR
var.name: __arg_3921_2
var.idx (into tracing_map_elt.vars[]): 0
type: unsigned long[]
size: 128
is_signed: 0
function: hist_field_nop()
key fields:
hist_data->fields[2]:
flags:
HIST_FIELD_FL_KEY
ftrace_event_field name: prev_pid
type: pid_t
size: 8
is_signed: 1
function: hist_field_s32()
The "function:" field above is added.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260122203822.58df4d80@gandalf.local.home
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When /proc/sys/kernel/traceoff_on_warning is set to 1, the top level
tracing buffer is disabled when a warning happens. This is very useful
when debugging and want the tracing buffer to stop taking new data when a
warning triggers keeping the events that lead up to the warning from being
overwritten.
Now that there is also a persistent ring buffer and an option to have
trace_printk go to that buffer, the same holds true for that buffer. A
warning could happen just before a crash but still write enough events to
lose the events that lead up to the first warning that was the reason for
the crash.
When /proc/sys/kernel/traceoff_on_warning is set to 1 and a warning is
triggered, not only disable the top level tracing buffer, but also disable
the buffer that trace_printk()s are written to.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260121093858.5c5d7e7b@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ENTRIES_PER_PAGE_GROUP() returns the number of dyn_ftrace entries in a page
group, identified by its order.
No functional change.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260113152243.3557219-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
By doing:
# trace-cmd sqlhist -e -n futex_wait select TIMESTAMP_DELTA_USECS as lat from sys_enter_futex as start join sys_exit_futex as end on start.common_pid = end.common_pid
and
# trace-cmd start -e futex_wait -f 'lat > 100' -e page_pool_state_release -f 'pfn == 1'
The output of the show_event_trigger and show_event_filter files are well
aligned because of the inconsistent 'tab' spacing:
~# cat /sys/kernel/tracing/show_event_triggers
syscalls:sys_exit_futex hist:keys=common_pid:vals=hitcount:__lat_12046_2=common_timestamp.usecs-$__arg_12046_1:sort=hitcount:size=2048:clock=global:onmatch(syscalls.sys_enter_futex).trace(futex_wait,$__lat_12046_2) [active]
syscalls:sys_enter_futex hist:keys=common_pid:vals=hitcount:__arg_12046_1=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
~# cat /sys/kernel/tracing/show_event_filters
synthetic:futex_wait (lat > 100)
page_pool:page_pool_state_release (pfn == 1)
This makes it not so easy to read. Instead, force the spacing to be at
least 32 bytes from the beginning (one space if the system:event is longer
than 30 bytes):
~# cat /sys/kernel/tracing/show_event_triggers
syscalls:sys_exit_futex hist:keys=common_pid:vals=hitcount:__lat_8125_2=common_timestamp.usecs-$__arg_8125_1:sort=hitcount:size=2048:clock=global:onmatch(syscalls.sys_enter_futex).trace(futex_wait,$__lat_8125_2) [active]
syscalls:sys_enter_futex hist:keys=common_pid:vals=hitcount:__arg_8125_1=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
~# cat /sys/kernel/tracing/show_event_filters
synthetic:futex_wait (lat > 100)
page_pool:page_pool_state_release (pfn == 1)
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260112153408.18373e73@gandalf.local.home
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Avoid running the wakeup irq_work on an isolated CPU. Since the wakeup can
run on any CPU, let's pick a housekeeping CPU to do the job.
This change reduces additional noise when tracing isolated CPUs. For
example, the following ipi_send_cpu stack trace was captured with
nohz_full=2 on the isolated CPU:
<idle>-0 [002] d.h4. 1255.379293: ipi_send_cpu: cpu=2 callsite=irq_work_queue+0x2d/0x50 callback=rb_wake_up_waiters+0x0/0x80
<idle>-0 [002] d.h4. 1255.379329: <stack trace>
=> trace_event_raw_event_ipi_send_cpu
=> __irq_work_queue_local
=> irq_work_queue
=> ring_buffer_unlock_commit
=> trace_buffer_unlock_commit_regs
=> trace_event_buffer_commit
=> trace_event_raw_event_x86_irq_vector
=> __sysvec_apic_timer_interrupt
=> sysvec_apic_timer_interrupt
=> asm_sysvec_apic_timer_interrupt
=> pv_native_safe_halt
=> default_idle
=> default_idle_call
=> do_idle
=> cpu_startup_entry
=> start_secondary
=> common_startup_64
The IRQ work interrupt alone adds considerable noise, but the impact can
get even worse with PREEMPT_RT, because the IRQ work interrupt is then
handled by a separate kernel thread. This requires a task switch and makes
tracing useless for analyzing latency on an isolated CPU.
After applying the patch, the trace is similar, but ipi_send_cpu always
targets a non-isolated CPU.
Unfortunately, irq_work_queue_on() is not NMI-safe. When running in NMI
context, fall back to queuing the irq work on the local CPU.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Clark Williams <clrkwllms@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20260108132132.2473515-1-ptesarik@suse.com
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To audit active event triggers, userspace currently must traverse the
events/ directory and read each individual trigger file. This is
cumbersome for system-wide auditing or debugging.
Introduce "show_event_triggers" at the trace root directory. This file
displays all events that currently have one or more triggers applied,
alongside the trigger configuration, in a consolidated
system:event [tab] trigger format.
The implementation leverages the existing trace_event_file iterators
and uses the trigger's own print() operation to ensure output
consistency with the per-event trigger files.
Link: https://patch.msgid.link/20260105142939.2655342-3-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, to audit active Ftrace event filters, userspace must
recursively traverse the events/ directory and read each individual
filter file. This is inefficient for monitoring tools and debugging.
Introduce "show_event_filters" at the trace root directory. This file
displays all events that currently have a filter applied, alongside the
actual filter string, in a consolidated system:event [tab] filter
format.
The implementation reuses the existing trace_event_file iterators to
ensure atomic traversal of the event list and utilises guard(rcu)() for
automatic, scope-based protection when accessing volatile filter
strings.
Link: https://patch.msgid.link/20260105142939.2655342-2-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This specific workflow has no benefits being per-cpu, so instead of
system_percpu_wq the new unbound workqueue has been used (system_dfl_wq).
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251230142820.173712-1-marco.crivellari@suse.com
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add support for displaying bitmasks in human-readable list format (e.g.,
0,2-5,7) in addition to the default hexadecimal bitmap representation.
This is particularly useful when tracing CPU masks and other large
bitmasks where individual bit positions are more meaningful than their
hexadecimal encoding.
When the "bitmask-list" option is enabled, the printk "%*pbl" format
specifier is used to render bitmasks as comma-separated ranges, making
trace output easier to interpret for complex CPU configurations and
large bitmask values.
Link: https://patch.msgid.link/20251226160724.2246493-2-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With the change to replace kfree() with trigger_data_free(), which starts
out doing the exact same thing as event_trigger_reset_filter(), there's no
reason to call event_trigger_reset_filter() before calling
trigger_data_free(). Remove the call to it.
Link: https://lore.kernel.org/linux-trace-kernel/20251211204520.0f3ba6d1@fedora/
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20260108174429.2d9ca51f@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Memory allocated with trigger_data_alloc() requires trigger_data_free()
for proper cleanup.
Replace kfree() with trigger_data_free() to fix this.
Found via static analysis and code review.
This isn't a real bug due to the current code basically being an open
coded version of trigger_data_free() without the synchronization. The
synchronization isn't needed as this is the error path of creation and
there's nothing to synchronize against yet. Replace the kfree() to be
consistent with the allocation.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251211100058.2381268-1-linmq006@gmail.com
Fixes: e1f187d09e ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
only one core change, the rest are drivers. The core change reorders
some state operations in the error handler to try to prevent missed
wake ups of the error handler (which can halt error processing and
effectively freeze the entire system).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaXZkyRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWQoAD9GhKN9FMdjxlLtb7cuy3GJq41QnOaTJ7K
ze12EznP6RgA/RODy+aKgL9+NQXOLBycfDjUzzYDzA5BTUtR2dg4Zt5E
=eS8f
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
This a late fix for v6.19.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaXZO3gAKCRAaerohdGur
0lIAAQCZwC7ZDCJiygqv4RJkllD4p7D0TE5A+QThYZM4ICM1nQD/cTCpj+JpPkPo
+/ioRefxKl1TzXo6yarGgTUa2GhdvwM=
=9PUF
-----END PGP SIGNATURE-----
Merge tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Here are some small char/misc/iio and some other minor driver subsystem
fixes for 6.19-rc7. Nothing huge here, just some fixes for reported
issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaXY0dA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkhgCgvwYNIuJosuQRKK0sFTOR1Utig3sAn2g6E2H9
AOZZ43qoosl++HsuXDLP
=XzfC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Here are 3 small serial driver fixes for 6.19-rc7 that resolve some
reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaXY1Ow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylO9gCeNnCW0Z4/UcDhgyw033D4pvB9EvUAn2/fXgLd
zd7zEVcx0Xn1oMYDx6Dp
=4Tw5
-----END PGP SIGNATURE-----
Merge tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
-----BEGIN PGP SIGNATURE-----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=u22+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
* tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: spacemit: drop IRQF_ONESHOT flag from IRQ request
- a couple quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaXWxMAAKCRBAj56VGEWX
nMznAQDw4ewqL3q8ere2waxxBS8AHzT9EhD7hwCsU2vA8BmerwD/cnaYaYk9rLyI
siZkL7+tJHnptiqoakg72Ol9Y4RjGA0=
=18Ic
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7 ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual.
This avoids spurious interrupts during updates.
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig symbol
for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference
-----BEGIN PGP SIGNATURE-----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=XHMU
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single event
that can display fields from both events as well as the time delta that
took place between the events. It can also pass a stacktrace from the
first event so that it can be displayed by the synthetic event (this is
useful to get a stacktrace of a task scheduling out when blocked and
recording the time it was blocked for).
A synthetic event can also connect an existing synthetic event to another
event. An issue was found that if the first synthetic event had a stacktrace
as one of its fields, and that stacktrace field was passed to the new
synthetic event to be displayed, it would crash the kernel. This was due to
the stacktrace not being saved as a stacktrace but was still marked as one.
When the stacktrace was read, it would try to read an array but instead read
the integer metadata of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stracktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses are
greater than 2GB apart it could lead to truncation and cause a bad search
result. Use normal compares instead of a subtraction between addresses to
calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two different
types that hold the argument array. The macro FGRAPH_ENTRY_ARGS() is used
to find the correct arguments from the given type. One location was missed
and still referenced the arguments directly via entry->args and could
produce the wrong value depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaXUQLxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgsJAQDgtWH9DWUkJKgzXTkiOA0l8JArPOVf
tCSMla2wWJA70QD/as2ptacYAFU9v1oxO5YIgsKOLFBF68ZUIhJtvXpqtAE=
=JeC6
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Document project continuity procedures. This is a plan for a plan for
navigating events that affect the forward progress of the canonical
Linux repository, torvalds/linux.git.
It is a follow-up from Maintainer Summit [1].
Co-developed-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lwn.net/Articles/1050179/ [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors.
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs.
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaXTJdAAKCRBFlHeO1qrK
Lqt/AQDN7X8D6ABCPpYVZ0KKZZulLXjmv52CqtXc1IHBuergCgD/TEOu+t41amVb
EkSO6/yN/NwMP0+eEF+XT1ybM3CYDQI=
=8bg5
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
- Fix PELT clock synchronization bug when entering idle
- Disable the NEXT_BUDDY feature, as during extensive testing
Mel found that the negatives outweigh the positives.
- Make wakeup preemption less aggressive, which resulted in
an unreasonable increase in preemption frequency.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pGnx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix PELT clock synchronization bug when entering idle
- Disable the NEXT_BUDDY feature, as during extensive testing
Mel found that the negatives outweigh the positives
- Make wakeup preemption less aggressive, which resulted in
an unreasonable increase in preemption frequency
* tag 'sched-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Revert force wakeup preemption
sched/fair: Disable scheduler feature NEXT_BUDDY
sched/fair: Fix pelt clock sync when entering idle
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag.
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lNSW
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized
* tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Do not enable BTS for guests
perf: Fix refcount warning on event->mmap_count increment
- Fix spurious interrupts during resume in the renesas-rzv2h driver
- Fix a 32+ bit physical memory truncation bug in the gic-v3-its
driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pNjT
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix spurious interrupts during resume in the renesas-rzv2h driver
- Fix a 32+ bit physical memory truncation bug in the gic-v3-its driver
* tag 'irq-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Avoid truncating memory addresses
irqchip/renesas-rzv2h: Prevent TINT spurious interrupt during resume
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAml0eFAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP+6Qf/QyjSaQHurVqfigKoj4XI9QsF2IoD
m4anhrLyzkcE1vMShHkaw6Xx7GjZcrbCqZ5L1qY94B4yUdIaFGR5hkGYPX4OXqrn
XP6Oq5lO+1iOzxfOQ+7gZVBYBIHt6OBjFpBRxv9AtRHuin1GkxEmh7g5oPsy/zT6
8IHCtf85mnJXZNDGwVuzII1QXj4CnYwCL37lzNTo+bzf9os7Xtn1RSj3p2OoMKsM
IKzF2oevMblj3r+L4pOQLXkc22S5OF3nkti+Q6uu2nBoiZ9ivWOTHxjkYU5QAXwm
tyRkEMHuV5zNGIaAhRDe+0wxx0iD5DTJQfioE+z8vfLASqZ8nmY5DRyaQw==
=+Y93
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
k1: drop IRQF_ONESHOT from IRQ request to fix genirq warning.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaXNp+wAKCRDaeAVmJtMt
bv0EAP4405vU1RTez3QVILfBC6hH9AUfm6eWReBmzuKBdvZJOwD/bCF+Avv0ev6Z
pfQbVjWAAqkP6QWQjPLRdH0ZJy4UkQ8=
=kaCb
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.19-rc7
k1: drop IRQF_ONESHOT from IRQ request to fix genirq warning.
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaWiyJBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFqVhAQDM4Lbrq0F80X+YzvO7oxWioOy4
JiTATSii9Lit8KY6fgEAvLD4qaggLdF3+WY+V37YmTj3UDgI31ClBr+xSvSengA=
=XaL0
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.19-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.19
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
