The #ifdef check around the function definition for two functions was
changed without also changing the one on the declaration:
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:359:6: error: redefinition of 'iwl_uefi_get_sgom_table'
359 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/intel/iwlwifi/fw/uefi.c:11:
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:294:6: note: previous definition of 'iwl_uefi_get_sgom_table' with type 'void(struct iwl_trans *, struct iwl_fw_runtime *)'
294 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans, struct iwl_fw_runtime *fwrt)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:392:5: error: redefinition of 'iwl_uefi_get_uats_table'
392 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:299:5: note: previous definition of 'iwl_uefi_get_uats_table' with type 'int(struct iwl_trans *, struct iwl_fw_runtime *)'
299 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
Adapt it by merging the declarations into the existing #ifdef block.
Fixes: 74f4cd7107 ("wifi: iwlwifi: take SGOM and UATS code out of ACPI ifdef")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/20240212112343.1148931-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was still referring to cfg80211_chandef_primary_freq(),
fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: b82730bf57 ("wifi: cfg80211/mac80211: move puncturing into chandef")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've seen this warning trigger, and while the reason is
probably obvious, I haven't been able to see it yet. Add
more information to the warning message to help identify
the cause. Also print out both index and SSN for all the
messages.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.581427dc81fc.I9a109d02b4349807dce521c693ecd3516ec58cc0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is always a bit confusing, the code first does all the
reclaim (with its own debug messages), and _then_ prints it
got a BA notification from firmware. Turn that around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.825245e0803f.Ic607c57f43eb7c7ff122ffee8f3994fd040d578f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags argument to enable/disable beacon filtering functions
is unused and always zero, so just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware (later) actually uses the values even for keys
that are invalid as far as the host is concerned, later in
rekeying, and then only sets the low 48 bits since the PNs
are only 48 bits over the air. It does, however, compare the
full 64 bits later, obviously causing problems.
Remove the memset and use kzalloc instead to avoid any old
heap data leaking to the firmware. We already init all the
other fields in the struct anyway. This leaves the data set
to zero for any unused fields, so the firmware can look at
them safely even if they're not used right now.
Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.462101146fef.I10f3855b99417af4247cff04af78dcbc6cb75c9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newer firmware versions no longer needs this command. Don't send it if
the firmware advertises it does not need it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.527595995aa0.I0381bef1dc815945f2ec194fecc657e5c75bb2ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible.
Fixes: 5c75a208c2 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2f2c602ab3c6.If13b2e2fa532381d985c07df130bee1478046c89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This image can be pretty big (I've seen order-7 allocations!),
and we later have to copy it to DMA memory (in newer FW even
there it won't need to be contiguous), so we can easily deal
with it being in vmalloc. Use kvmemdup()/kvfree() for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.9b4c06b5d533.Idf699b36ec95ee36f530355cd2cb1da297a098f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For non-QoS nullfunc packets we currently do the duplicate detection,
which seems a bit wrong. Fix the code to check for _any_ instead of
just _qos_ nullfunc.
Also remove setting the RX_FLAG_DUP_VALIDATED flag, we haven't done
anything here; in particular, we haven't checked for multicast in an
MLO scenario.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4fea3bd2d4a6.Ib80764f4581d875cff08469016894f7c817c3828@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When retrieving the queue index ("SCD SSN") from the TX response,
it's currently masked with 0xFFF. However, now that we have queues
longer than 4k, that became wrong, so make the mask depend on the
hardware family.
This fixes an issue where if we get a single frame reclaim while
in the top half of an 8k long queue, we'd reclaim-wrap the queue
twice (once on this and then again on the next non-single reclaim)
which at least triggers the WARN_ON_ONCE() in iwl_txq_reclaim(),
but could have other negative side effects (such as unmapping a
frame that wasn't transmitted yet, and then taking an IOMMU fault)
as well.
Fixes: 7b3e42ea2e ("iwlwifi: support multiple tfd queue max sizes for different devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4148a6ef54e0.I733a70f679c25f9f99097a8dcb3a1f8165da6997@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After waking from D3, we set the iPN given by the firmware.
For some reason, CIPHER_SUITE_AES_CMAC was missed.
That caused copying garbage to the iPN - causing false replays.
(since 'seq' is on the stack, and the iPN from the firmware
was not copied into it, it contains garbage which later is
copied to the iPN key).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.2be5b35be30f.I99db8700d01092d22a6d76f1fc1bd5916c9df784@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If during D3 there was both a GTK rekey and a
disconnection, when waking up, we must first
update the new keys and then disconnect.
The reason is that when disconnecting we first need
to remove the keys.
Trying to remove invalid keys results in firmware
assert.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.68cf3974b5d7.Iac9b71a1906ab973aba9baadc9e923b63c0b4945@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With unlimited pseudo-D3, we can get stuck here in the read if
the firmware never wakes up. All of our testing infrastructure
however will anyway give up after at most a minute, so there's
no value in that.
Limit this to about a minute to avoid getting stuck with the
RTNL held forever, which basically makes the machine unusable
and then we can't even understand what caused the failure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.ca55b3a7fa8d.Id746846f187442ebc689416d2688f2bd9278c0e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When waking from D3 (and a GTK rekey happened during
D3), the key itself is saved in iwl_wowlan_status_data::gtk
array, but the PN is saved in iwl_wowlan_status_data::gtk_seq
array.
The indices (of the same key) might differ in both arrays.
Fix using the gtk array index in the gtk_seq array.
Rather, iterate and search for the correct key in the
gtk_seq array.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.bdd0511c007d.I3325288c64c010a4d008ac4429de1c2b14ef764c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The client needs to disconnect from AP in case of more than 19 missed
beacons only if no data is coming from that AP, otherwise it needs to
stay connected.
Signed-off-by: Daniel Amosi <amosi.daniel@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.080195242c18.Ib166fc4e46666165a88e673a4a196cb8f18fdec4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before sending SESSION PROTECTION cmd the driver verifies that the
link for which the cmd is going to be sent is active.
The existing code is checking it only for MLD vifs,
but also the deflink (in non-MLD vifs) needs to be active in order
the have a session protection for it.
Fix this by checking if the link is active also for non-MLD vifs
Fixes: 1350658373 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240205211151.c61820f14ca6.Ibbe0f848f3e71f64313d21642650b6e4bfbe4b39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The BIOS tables SGOM and UATS are read from UEFI, but require
additional tables (WGDS and DSM func 3, respectively) which used to be
read from ACPI only, so the code handling those tables had to be under
ifdef ACPI. But now the driver reads those tables (WGDS and DSM) from
both ACPI and UEFI, so SGOM and UATS code shouldn't be under ifdef ACPI
anymore.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.dcaa3325773f.I649079c842369dcae3a362842322deca422a61d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CT kill should stop doing a lot of TX etc. to cool down the
NIC, but we don't stop all commands from going to the NIC,
and as such we shouldn't abort queue sync, since it can get
confused if we do, warning that we do it twice at the same
time etc. Only stop it when we'd also not send it in the
first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4e0745e2cd97.I311dc623ce68de6a2da3c21c8d84a387844f714a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
define the timeout on RX queues notification as a macro so it will be
clearer.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.a6985ea87751.Iafb7ae13aa58d66512e4b3fa6c75149c75cbc305@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's a bit tricky to understand what's going on here, add
more data to the warning messages to make that clearer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.1df82a509636.I2f71811569a5c48eb166c4caa779af2d6160ad33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Advertise support for protected ranging negotiation if the firmware
supports it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206135637.9bb7e13ad18c.I578af1c9836e91069ce318b265bd221f42955992@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As documented in the comment, this queue sync was here to
ensure that an async IWL_MVM_RXQ_NSSN_SYNC queue sync won't
race with setting up a new BA session with the same BAID.
However, we no longer do IWL_MVM_RXQ_NSSN_SYNC queue sync,
so we can remove this as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Grumbach, Emmanuel <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.0a09ab337b54.I0dfe239dc30577a2ff23f910b10e9957364ccc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code here is the pre-MLD API, but of course older FW
that doesn't support MLD APIs cannot support EHT. Remove
some code that shouldn't be there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.bde5a9d87759.I4c69dd94416f92b0f1f53dd57dafecbec643600d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This debugfs entry is used to configure the rx_phyinfo.
Currently we are sending the phy cmd only for the deflink.
Change it to send the cmd for all active links of the vif
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240204235836.a68ee2b6cb58.Iddc47c608ec990b12be0ae5b1ee89bcf6beb0f6a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In much of the PHY context handling code the chandef
coming from mac80211 is read-only, mark them const
to make that clearer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.e7fbd3e26d85.I72d72e61dc5f5fc76c53e32cb60b66237eaedec3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for
- PPAG revision 3 in BIOS to enable PPAG in UHB
- PPAG command version 5, this command allows OEM to control
enablement of PPAG for LPI for UHB mode in USA and ETSI countries.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.d17425824b11.If2c1b29e3c579f4135383681af2d625cfe2cffcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On new devices the HW rfkill shutdown doesn't need to be handled
"as fast as possible", so disallow the immediate shutdown mode
here via documentation and a warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.794c5387e67e.I064365428815ec3135afa345fbbde78449b60203@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a
finalizing worker using the deflink. With MLO, there is a need to do it
on a given link basis.
Pass link ID of the link on which CSA needs to be finalized.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add changes to start a channel switch as well as finalize it on link basis
in order to support CSA with MLO as well.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support CSA with MLO, there is a need to handle the functions
ieee80211_set_csa_beacon() and ieee80211_set_after_csa_beacon() on a per
link basis.
Implement this by making the function argument accept the the link data
instead of the sdata.
Currently, deflink would only be passed. Proper link data will be passed in
a subsequent patch.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-4-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, function to update beacon counter uses deflink to fetch
the beacon and then update the counter. However, with MLO, there is
a need to update the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data during beacon update counter.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-3-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during channel switch, no link id information is passed down.
In order to support channel switch during Multi Link Operation, it is
required to pass link id as well.
Add changes to pass link id in the channel_switch cfg80211_ops.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new Wi-Fi Standard (IEEE Std 802.11-2020 9.4.2.160) specifies that
the Wide Bandwidth Channel Switch (WBCS) Element subfields have the same
definitions as VHT operation information if the operating band is not
S1G.
The problem comes when the BSS is in 6 GHz band, the STA parses the WBCS
Element by ieee80211_chandef_vht_oper(), which checks the capabilities for
HT/VHT mode, not HE/EHT mode.
This patch refactors STA CSA parsing flow so that the corresponding
capabilities can be checked. Also, it adds the way to use op_class in ECSA
Element to build a new chandef.
In summary, the new steps for STA to handle CSA event are:
1. build the new chandef from one of the CSA-related (Sub)Elements in
following order,
- Bandwidth Indication (Sub)Element
- Wide Bandwidth Channel Switch (Sub)Element
- Operating class in Extended Channel Switch Announcement Element
- Channel Switch Announcement Element
2. convert the new chandef into operation information according to the
operating band in order to check if the new chandef fits STA's
capabilities.
3. downgrade the bandwidth until current bandwidth is not disabled.
Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20231222010914.6521-3-michael-cy.lee@mediatek.com
[rebase on top of the changes with struct ieee80211_conn_settings,
prefer leXY_encode_bits()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This utility is used in STA CSA handling. The op_class in the ECSA
Element can be converted into chandef.
Co-developed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20231222010914.6521-2-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some drivers may (notably mt76 does) not set up sband->band
before registering, and cfg80211 will fill it in later. But
since the HT/HE capability check mac80211 required it to be
initialized already, otherwise failing things. This really
isn't necessary though since the code is iterating the list
of bands, and has the 'band' variable available. Fix it to
not require the sband->band to be initialized already.
Fixes: f04d2c247e ("wifi: mac80211: disallow drivers with HT wider than HE")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Debugged-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218466
Link: https://msgid.link/20240207115920.43cbedffb5c3.I4968e12275a3f95926e3f3ccae81e50f23fe4d4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The vif pointer at least looks like it can actually be NULL
in some cases such as the monitor-mode vif, causing static
checkers to complain with the immediate derefence. In these
cases the sta pointer will also be NULL, but clarify it in
the code anyway.
Link: https://msgid.link/20240131164910.60066625a239.Idfb6a5a9876f9f631eae760055e1c4018259a971@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
