rtw8703b_query_rx_desc(), rtw8723d_query_rx_desc(),
rtw8821c_query_rx_desc(), rtw8822b_query_rx_desc(), and
rtw8822c_query_rx_desc() are almost identical, so replace them all with
a single function, rtw_rx_query_rx_desc().
Also, access the RX descriptor using a struct with __le32 members and
le32_get_bits().
Tested with RTL8811CU, RTL8811AU, and RTL8812AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Tested-by: Ping-Ke Shih <pkshih@realtek.com> # RTL8723DE and RTL8822CE
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/913f1747-38fc-4409-85a4-57bb9cee506b@gmail.com
For the case of DBCC enabled and fwrole version 0, the local variable
wl_rinfo.dbcc_2g_phy might not be set by following for-loop, leading
uninitialized variable before using.
Addresses-Coverity-ID: 1586724 ("Uninitialized scalar variable")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240919081216.28505-3-pkshih@realtek.com
The return value of ieee80211_probereq_get() might be NULL, so check it
before using to avoid NULL pointer access.
Addresses-Coverity-ID: 1529805 ("Dereference null return value")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240919081216.28505-2-pkshih@realtek.com
The drv_priv hooked to mac80211 become as below.
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_vif | <---> | rtw89_vif | -------> | rtw89_vif_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_vif_link |
+----------------+
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_sta | <---> | rtw89_sta | -------> | rtw89_sta_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_sta_link |
+----------------+
The relation bewteen mac80211 link_id and our link instance is like below.
|\
(link_id) | \
0 -------- | |
1 -------- | | ------ instance-0 (link_id: X) -> work on HW band 0
2 -------- | |
... | | ------ instance-1 (link_id: Y) -> work on HW band 1
14 -------- | |
| /
|/
N.B. For cases of non-MLD connection, we set our link instance-0
active with link_id 0. So, our code flow can be compatible between
non-MLD connection and MLD connection.
Based on above, we tweak entire driver architecture first. But, we don't
dynamically enable multiple links here. That will be handled separately.
Most of the things changed here are changing flows to iterate all active
links and read bss_conf/link_sta data according to target link. And, for
cases of scan, ROC, WOW, we use instance-0 to deal with the request.
There are some things listed below, which work for now but need to extend
before multiple active links.
1. tx path
select suitable link instance among multiple active links
2. rx path
determine rx link by PPDU instead of always link instance-0
3. CAM
apply MLD pairwise key to any active links dynamically
Besides, PS code cannot easily work along with tweaking architecture. With
supporting MLO flag (currently false), we disable PS first and will fix it
by another commit in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-8-pkshih@realtek.com
Refactor STA related functions, e.g. add/assoc/disassoc/disconnect/remove
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-7-pkshih@realtek.com
Refactor VIF related functions, e.g. add/remove/assoc/mapping
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-6-pkshih@realtek.com
Tweak code to not always access sta->deflink directly. Instead,
according to link_id, read target link_sta from sta->link[].
For now, rtwsta_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-5-pkshih@realtek.com
Tweak code to not always access vif->bss_conf directly. Instead,
according to link_id, read target bss_conf from vif->link_conf[].
For now, rtwvif_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-4-pkshih@realtek.com
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_sta_link *sta_to_rtwsta_safe(struct ieee80211_sta *sta)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-3-pkshih@realtek.com
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_vif_link *vif_to_rtwvif_safe(struct ieee80211_vif *vif)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-2-pkshih@realtek.com
RX DCK stands for receiver DC calibration. The v1 format adds a field to
indicate the calibration is for operation channel or an average value for
all scanning channels. Update the format accordingly, and increase
firmware format sequence to 2.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-3-pkshih@realtek.com
Don't populate the read-only arrays params, toshiba_smid1, toshiba_smid2,
samsung_smid and lenovo_smid on the stack at run time, instead make them
static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240912135335.590464-1-colin.i.king@gmail.com
As commit cbe16f35be ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, the code below is subobtimal. IRQF_NO_AUTOEN flag can be used by
drivers to request_irq(). It prevents the automatic enabling of the
requested interrupt in the same safe way. With that the usage can be
simplified and corrected.
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-4-ruanjinjie@huawei.com
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 853402a008 ("mwifiex: Enable WoWLAN for both sdio and pcie")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-3-ruanjinjie@huawei.com
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: cd8d3d3212 ("p54spi: p54spi driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-2-ruanjinjie@huawei.com
Providing the random seed to firmware was tied to the fact that the
device has a valid OTP, which worked for some Apple chips. However,
it turns out the BCM43752 device also needs the random seed in order
to get firmware running. Suspect it is simply tied to the firmware
branch used for the device. Introducing a mechanism to allow setting
it for a device through the device table.
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # On RK3588 EVB1
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-4-9d80fea5326d@wesion.com
WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
to the top of brcmf_of_probe. Change function prototypes from void
to int and add appropriate errno's for return values that will be
send to bus when error occurred.
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # On RK3588 EVB1
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-3-9d80fea5326d@wesion.com
Not only AP6275P Wi-Fi device but also all Broadcom wireless devices allow
external low power clock input. In DTS the clock as an optional choice in
the absence of an internal clock.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-2-9d80fea5326d@wesion.com
It's the device id used by AP6275P which is the Wi-Fi module
used by Rockchip's RK3588 evaluation board and also used in
some other RK3588 boards.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-1-9d80fea5326d@wesion.com
Resources definition can become simpler and more organised by
using the dedicated helpers.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Tested-by: Sabeeh Khan <sabeeh-khan@ti.com>
Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-4-vassilisamir@gmail.com
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type().
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-2-vassilisamir@gmail.com
EPROBE_DEFER, which probably wasn't available when this driver was
written, can be used instead of waiting manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240912024903.6201-9-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleans it up automatically. No need to handle manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-6-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switching to devm management of mii_bus allows to remove
mdiobus_unregister calls and thus avoids needing a mii_bus global struct
member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's the last to go in remove. Safe to let devm handle it.
Also move request_irq to probe for clarity. It's removed in _remove not
close.
Use dev_err_probe instead of printk. Handles EPROBE_DEFER automatically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows to simplify the code slightly. This is safe to do as free_netdev
gets called last.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbhXBwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28byH+B/0ctrcmzjguuddiCiUkMS0EJaocxnE7
Et3eZtV66QlxLahTOQDAcePVIyeq1Rzc8vsruNu0QJje2Yp21WITQbl9x2dX/JEl
sPggkKpu7ERKE1vS4+HEgr3PXbjXFbF6k38jygiswG0vYzKkBT5keHJ7f9qPC+cU
BdXr+ZjYK0I5TQBOQKSH4FlKVtXSidxvYRVT4AHcQ0k3vegMc7J+/fgAaznsS85p
nwV1PsXXNQh7nM5jqdMSbibL8jvgDFiSyxtQLDogqd0ah0bYOAmyiEONv6v4UGkF
1blHqiyHUnslMYgHL/C3U0cQF8ETrDd25FOpPr1pbKbW+/KueO9Y1IyP
=kclM
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-11
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return an error if dma_set_mask_and_coherent() fails. Don't return
success.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the drivers which used this header have been deleted, most
of these code is obsoleted, move the only defines that are actually
used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the
file completely.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://patch.msgid.link/20240912011949.2726928-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nelson Escobar says:
====================
enic: Report per queue stats
Patch #1: Use a macro instead of static const variables for array sizes. I
didn't want to add more static const variables in the next patch
so clean up the existing ones first.
Patch #2: Collect per queue statistics
Patch #3: Report per queue stats in netdev qstats
Patch #4: Report some per queue stats in ethtool
# NETIF="eno6" tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..5
ok 1 stats.check_pause # XFAIL pause not supported by the device
ok 2 stats.check_fec # XFAIL FEC not supported by the device
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"ifindex": "34"}'
[{'ifindex': 34,
'rx-bytes': 66762680,
'rx-csum-unnecessary': 1009345,
'rx-hw-drop-overruns': 0,
'rx-hw-drops': 0,
'rx-packets': 1009673,
'tx-bytes': 137936674899,
'tx-csum-none': 125,
'tx-hw-gso-packets': 2408712,
'tx-needs-csum': 2431531,
'tx-packets': 15475466,
'tx-stop': 0,
'tx-wake': 0}]
v2: https://lore.kernel.org/20240905010900.24152-1-neescoba@cisco.com
v1: https://lore.kernel.org/20240823235401.29996-1-neescoba@cisco.com
====================
Link: https://patch.msgid.link/20240912005039.10797-1-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make 'ethtool -S <intf>' output show some per rq/wq statistics that
don't exist in the netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Collect and per rq/wq statistics.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-3-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In enic_ethtool.c there is no need to use static const variables to store
array sizes when a macro can be used instead.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-2-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: fib_rules: Add DSCP selector support
Currently, the kernel rejects IPv4 FIB rules that try to match on the
upper three DSCP bits:
# ip -4 rule add tos 0x1c table 100
# ip -4 rule add tos 0x3c table 100
Error: Invalid tos.
The reason for that is that historically users of the FIB lookup API
only populated the lower three DSCP bits in the TOS field of the IPv4
flow key ('flowi4_tos'), which fits the TOS definition from the initial
IPv4 specification (RFC 791).
This is not very useful nowadays and instead some users want to be able
to match on the six bits DSCP field, which replaced the TOS and IP
precedence fields over 25 years ago (RFC 2474). In addition, the current
behavior differs between IPv4 and IPv6 which does allow users to match
on the entire DSCP field using the TOS selector.
Recent patchsets made sure that callers of the FIB lookup API now
populate the entire DSCP field in the IPv4 flow key. Therefore, it is
now possible to extend FIB rules to match on DSCP.
This is done by adding a new DSCP attribute which is implemented for
both IPv4 and IPv6 to provide user space programs a consistent behavior
between both address families.
The behavior of the old TOS selector is unchanged and IPv4 FIB rules
using it will only match on the lower three DSCP bits. The kernel will
reject rules that try to use both selectors.
Patch #1 adds the new DSCP attribute but rejects its usage.
Patches #2-#3 implement IPv4 and IPv6 support.
Patch #4 allows user space to use the new attribute.
Patches #5-#6 add selftests.
====================
Link: https://patch.msgid.link/20240911093748.3662015-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
