We attempt to initialize each CPU's arch_timer event stream in
arch_timer_evtstrm_enable(), which we call from the
arch_timer_starting_cpu() cpu hotplug callback which is registered early
in boot. As this is registered before we initialize the system cpucaps,
the test for ARM64_HAS_ECV will always be false for CPUs present at boot
time, and will only be taken into account for CPUs onlined late
(including those which are hotplugged out and in again).
Due to this, CPUs present and boot time may not use the intended divider
and scale factor to generate the event stream, and may differ from other
CPUs.
Correct this by only initializing the event stream after cpucaps have been
finalized, registering a separate CPU hotplug callback for the event stream
configuration. Since the caps must be finalized by this point, use
cpus_have_final_cap() to verify this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() and size_sub() helpers, instead of the
open-coded version, to calculate the size for the allocation of the
whole flexible structure, including of course, the flexible-array
member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSRvh1j2MVVhuOUv@work
Signed-off-by: Mark Brown <broonie@kernel.org>
AHB memory as MMIO should be mapped with ioremap rather than ioremap_wc,
which should have been used initially just to handle unaligned access as
a workaround.
Fixes: d166a73503 ("spi: fspi: dynamically alloc AHB memory")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20231010201524.2021340-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Andrii Nakryiko says:
====================
This patch set fixes ambiguity in BPF verifier log output of SCALAR register
in the parts that emit umin/umax, smin/smax, etc ranges. See patch #4 for
details.
Also, patch #5 fixes an issue with verifier log missing instruction context
(state) output for conditionals that trigger precision marking. See details in
the patch.
First two patches are just improvements to two selftests that are very flaky
locally when run in parallel mode.
Patch #3 changes 'align' selftest to be less strict about exact verifier log
output (which patch #4 changes, breaking lots of align tests as written). Now
test does more of a register substate checks, mostly around expected var_off()
values. This 'align' selftests is one of the more brittle ones and requires
constant adjustment when verifier log output changes, without really catching
any new issues. So hopefully these changes can minimize future support efforts
for this specific set of tests.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Verifier emits relevant register state involved in any given instruction
next to it after `;` to the right, if possible. Or, worst case, on the
separate line repeating instruction index.
E.g., a nice and simple case would be:
2: (d5) if r0 s<= 0x0 goto pc+1 ; R0_w=0
But if there is some intervening extra output (e.g., precision
backtracking log) involved, we are supposed to see the state after the
precision backtrack log:
4: (75) if r0 s>= 0x0 goto pc+1
mark_precise: frame0: last_idx 4 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (d5) if r0 s<= 0x0 goto pc+1
mark_precise: frame0: regs=r0 stack= before 1: (b7) r0 = 0
6: R0_w=0
First off, note that in `6: R0_w=0` instruction index corresponds to the
next instruction, not to the conditional jump instruction itself, which
is wrong and we'll get to that.
But besides that, the above is a happy case that does work today. Yet,
if it so happens that precision backtracking had to traverse some of the
parent states, this `6: R0_w=0` state output would be missing.
This is due to a quirk of print_verifier_state() routine, which performs
mark_verifier_state_clean(env) at the end. This marks all registers as
"non-scratched", which means that subsequent logic to print *relevant*
registers (that is, "scratched ones") fails and doesn't see anything
relevant to print and skips the output altogether.
print_verifier_state() is used both to print instruction context, but
also to print an **entire** verifier state indiscriminately, e.g.,
during precision backtracking (and in a few other situations, like
during entering or exiting subprogram). Which means if we have to print
entire parent state before getting to printing instruction context
state, instruction context is marked as clean and is omitted.
Long story short, this is definitely not intentional. So we fix this
behavior in this patch by teaching print_verifier_state() to clear
scratch state only if it was used to print instruction state, not the
parent/callback state. This is determined by print_all option, so if
it's not set, we don't clear scratch state. This fixes missing
instruction state for these cases.
As for the mismatched instruction index, we fix that by making sure we
call print_insn_state() early inside check_cond_jmp_op() before we
adjusted insn_idx based on jump branch taken logic. And with that we get
desired correct information:
9: (16) if w4 == 0x1 goto pc+9
mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1
mark_precise: frame0: parent state regs=r4 stack=: R2_w=1944 R4_rw=P1 R10=fp0
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9
mark_precise: frame0: regs=r4 stack= before 8: (66) if w4 s> 0x3 goto pc+5
mark_precise: frame0: regs=r4 stack= before 7: (b7) r4 = 1
9: R4=1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-6-andrii@kernel.org
Currently the way that verifier prints SCALAR_VALUE register state (and
PTR_TO_PACKET, which can have var_off and ranges info as well) is very
ambiguous.
In the name of brevity we are trying to eliminate "unnecessary" output
of umin/umax, smin/smax, u32_min/u32_max, and s32_min/s32_max values, if
possible. Current rules are that if any of those have their default
value (which for mins is the minimal value of its respective types: 0,
S32_MIN, or S64_MIN, while for maxs it's U32_MAX, S32_MAX, S64_MAX, or
U64_MAX) *OR* if there is another min/max value that as matching value.
E.g., if smin=100 and umin=100, we'll emit only umin=10, omitting smin
altogether. This approach has a few problems, being both ambiguous and
sort-of incorrect in some cases.
Ambiguity is due to missing value could be either default value or value
of umin/umax or smin/smax. This is especially confusing when we mix
signed and unsigned ranges. Quite often, umin=0 and smin=0, and so we'll
have only `umin=0` leaving anyone reading verifier log to guess whether
smin is actually 0 or it's actually -9223372036854775808 (S64_MIN). And
often times it's important to know, especially when debugging tricky
issues.
"Sort-of incorrectness" comes from mixing negative and positive values.
E.g., if umin is some large positive number, it can be equal to smin
which is, interpreted as signed value, is actually some negative value.
Currently, that smin will be omitted and only umin will be emitted with
a large positive value, giving an impression that smin is also positive.
Anyway, ambiguity is the biggest issue making it impossible to have an
exact understanding of register state, preventing any sort of automated
testing of verifier state based on verifier log. This patch is
attempting to rectify the situation by removing ambiguity, while
minimizing the verboseness of register state output.
The rules are straightforward:
- if some of the values are missing, then it definitely has a default
value. I.e., `umin=0` means that umin is zero, but smin is actually
S64_MIN;
- all the various boundaries that happen to have the same value are
emitted in one equality separated sequence. E.g., if umin and smin are
both 100, we'll emit `smin=umin=100`, making this explicit;
- we do not mix negative and positive values together, and even if
they happen to have the same bit-level value, they will be emitted
separately with proper sign. I.e., if both umax and smax happen to be
0xffffffffffffffff, we'll emit them both separately as
`smax=-1,umax=18446744073709551615`;
- in the name of a bit more uniformity and consistency,
{u32,s32}_{min,max} are renamed to {s,u}{min,max}32, which seems to
improve readability.
The above means that in case of all 4 ranges being, say, [50, 100] range,
we'd previously see hugely ambiguous:
R1=scalar(umin=50,umax=100)
Now, we'll be more explicit:
R1=scalar(smin=umin=smin32=umin32=50,smax=umax=smax32=umax32=100)
This is slightly more verbose, but distinct from the case when we don't
know anything about signed boundaries and 32-bit boundaries, which under
new rules will match the old case:
R1=scalar(umin=50,umax=100)
Also, in the name of simplicity of implementation and consistency, order
for {s,u}32_{min,max} are emitted *before* var_off. Previously they were
emitted afterwards, for unclear reasons.
This patch also includes a few fixes to selftests that expect exact
register state to accommodate slight changes to verifier format. You can
see that the changes are pretty minimal in common cases.
Note, the special case when SCALAR_VALUE register is a known constant
isn't changed, we'll emit constant value once, interpreted as signed
value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-5-andrii@kernel.org
Align subtest is very specific and finicky about expected verifier log
output and format. This is often completely unnecessary as in a bunch of
situations test actually cares about var_off part of register state. But
given how exact it is right now, any tiny verifier log changes can lead
to align tests failures, requiring constant adjustment.
This patch tries to make this a bit more robust by making logic first
search for specified register and then allowing to match only portion of
register state, not everything exactly. This will come handly with
follow up changes to SCALAR register output disambiguation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-4-andrii@kernel.org
Given missed_kprobe_recursion is non-serial and uses common testing
kfuncs to count number of recursion misses it's possible that some other
parallel test can trigger extraneous recursion misses. So we can't
expect exactly 1 miss. Relax conditions and expect at least one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-3-andrii@kernel.org
Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that might interfere accidentally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-2-andrii@kernel.org
The PSI trigger code is now making a distinction between privileged and
unprivileged triggers, after the following commit:
65457b74aa ("sched/psi: Rename existing poll members in preparation")
But some comments have not been modified along with the code, so they
need to be updated.
This will help readers better understand the code.
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Ziljstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/202310161920399921184@zte.com.cn
The same logic is used for clock stop prepare and deprepare, and
having different logs for the two steps helps identify problems.
In addition, when the "NotFinished" bit remains set, the error
handling is not quite right:
a) for the clock stop prepare, the error is handled at the caller
level, and the error is ignored: there's no good reason to prevent the
pm_runtime suspend from happening. Throwing an error that is later
ignored is confusing.
b) for the clock stop deprepare, the error is ignored in bus.c and a
dev_warn() log shown. Throwing an error is also alarming users for no
good reason.
For both cases, demoting the error to dev_dbg() makes more sense.
Link: https://github.com/thesofproject/linux/issues/4619
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231013010812.114216-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case of the prep descriptor while the channel is already running, the
CCR register value stored into the channel could already have its EN bit
set. This would lead to a bad transfer since, at start transfer time,
enabling the channel while other registers aren't yet properly set.
To avoid this, ensure to mask the CCR_EN bit when storing the ccr value
into the mdma channel structure.
Fixes: a4ffb13c89 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Tested-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20231009082450.452877-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Implement load_unaligned_zeropad() and enable DCACHE_WORD_ACCESS to
speed up string operations in fs/dcache.c and fs/namei.c.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide an s390 specific word-at-a-time implementation. Compared to the
generic variant the generated code for has_zero() is slightly
better. However find_zero() is much simpler since it reuses the result
of __fls() aka flogr() and now comes without any conditional branches,
while the generic variant has three of them.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of __EX_TABLE() macro, rename __EX_TABLE_UA() to __EX_TABLE()
and convert users of old __EX_TABLE() macro so they pass more parameters
to the changed __EX_TABLE() semantics.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Funciton loads_init() does not use loads_offset parameter.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With Secure Execution the error reply RX 0x8B now carries
an APFS value indicating why the request has been filtered
by a lower layer of the firmware. So display this value
as a warning line in the s390 debug feature trace.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces a new AP queue internal attribute
se_bound which reflects the bound state of an APQN within
a Secure Execution environment.
With introduction of Secure Execution guests now an
AP firmware queue needs to be bound to the guest before
usage. This patch introduces a new internal attribute
reflecting this bound state and some glue code to handle
this new field during lifetime of an AP queue device.
Together with that now the zcrypt scheduler considers
the state of the AP queues when a message is about to be
distributed among the existing queues. There is a new
function ap_queue_usable() which returns true only when
all conditions for using this AP queue device are fulfilled.
In details this means: the AP queue needs to be configured,
not checkstopped and within an SE environment it needs
to be bound. So the new function gives and indication
if the AP queue device is ready to serve requests or not.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.
However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.
With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.
Fixes: 2d72eaf036 ("s390/ap: implement SE AP bind, unbind and associate")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When physical memory is defined under z/VM using DEF STOR CONFIG, there
may be memory holes that are not hotpluggable memory. In such cases,
DCSS mapping could be placed in one of these memory holes. Subsequently,
attempting memory access to such DCSS mapping would result in a kasan
failure because there is no shadow memory mapping for it.
To maintain consistency with cases where DCSS mapping is positioned after
the kernel identity mapping, which is then covered by kasan zero shadow
mapping, handle the scenario above by populating zero shadow mapping
for memory holes where DCSS mapping could potentially be placed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When dma_set_coherent_mask() fails, sch->lock has not been
freed, which is allocated in css_sch_create_locks(), leading
to a memleak.
Fixes: 4520a91a97 ("s390/cio: use dma helpers for setting masks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-Id: <20230921071412.13806-1-dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/linux-s390/bd38baa8-7b9d-4d89-9422-7e943d626d6e@linux.ibm.com/
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add DT support, by:
1. Creating a panel bridge from DT, and attaching it to the encoder,
2. Replacing the custom connector with a bridge connector,
3. Obtaining clock configuration based on the compatible value.
Note that for now the driver uses a fixed clock configuration selecting
the bus clock, as the current code to select other clock inputs needs
changes to support any other SoCs than SH7724.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6185ab76aa300fa402e4f6610b2109665f2d8a1c.1694767209.git.geert+renesas@glider.be
Now the suspend/resume methods no longer need to look at internal driver
state, the dpms and started fields in the shmob_drm_crtc structure can
be removed, as well as the shmob_drm_crtc_dpms() wrapper. After this,
shmob_drm_crtc_atomic_{en,dis}able() became just wrappers around
shmob_drm_crtc_st{art,op}(), so inline the latter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/905b9ca72f43d40438c8cb1199cde140eb123204.1694767209.git.geert+renesas@glider.be
Implement atomic mode setting for both the primary and overlay planes.
This involves:
- Moving the primary plane handling code from CRTC mode setting to
plane handling shared by primary and overlay planes,
- Adding basic CRTC and mode config atomic mode setting ops, which
don't do much yet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a6b698a1c8c1eaf631c2f928f5888ab5fe7aa4c3.1694767209.git.geert+renesas@glider.be
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.
Implement this using the drm_crtc_vblank_{on,off}() helpers.
Note that drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. This is performed at CRTC creation time, requiring vertical
blank initialization to be moved before creating CRTCs.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e5833e5706b7792bfca8e6e56fc154a7c3e0574f.1694767209.git.geert+renesas@glider.be
Turning a CRTC off will prevent a queued page flip from ever completing,
potentially confusing userspace. Wait for queued page flips to complete
before turning the CRTC off to avoid this.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c97d5859c43fa36043c61de28d67688ebe345092.1694767209.git.geert+renesas@glider.be
Move legacy interface handling to the connector setup code.
Set up bus_flags and bus_formats in display_info according to the
bus format and panel information from platform data, to make it more
similar with DT-based connector/bridge/panel setup.
This will allow us to use the same LCD interface setup code for both
legacy and DT-based systems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/912f615eb87c847804a268200ab57c63453c65d4.1694767209.git.geert+renesas@glider.be
Replace the drm_mode_modeinfo field with videomode that includes more
signal polarity flags. This simplifies driver handling of panel modes
and prepares for DT support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Simplify]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4312e56de424d94399c6105e7159317eae86c9d5.1694767209.git.geert+renesas@glider.be
Now that drm_device is embedded in shmob_drm_device, we can use
a container_of()-based helper to get the shmob_drm_device pointer from
the drm_device, instead of using the deprecated drm_device.dev_private
field.
While at it, restore reverse Xmas tree ordering of local variable
declarations.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8ef4be8bffe75efc7f4b66f3732ec357f7d43e0f.1694767209.git.geert+renesas@glider.be
