Commit graph

335,609 commits

Author SHA1 Message Date
Grazvydas Ignotas
a859e4d659 wl1251: Fix memory leaks in SPI initialization
This patch fixes two memory leaks in the SPI initialization code.

Patch based on old maemo patch by:
Yuri Ershov <ext-yuri.ershov@nokia.com>

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20 14:10:25 -04:00
Grazvydas Ignotas
0d776fcdaf wl1251: always report beacon loss to the stack
Always report beacon loss to the stack, not only when in powersave
state. This is because there's possibility that the driver disables
PSM before it handles old BSS_LOSE_EVENT, so beacon loss has to be
reported.

Patch based on old maemo patch by:
Janne Ylalehto <janne.ylalehto@nokia.com>
Juuso Oikarinen <juuso.oikarinen@nokia.com>
Luciano Coelho <luciano.coelho@nokia.com>
Yuri Ershov <ext-yuri.ershov@nokia.com>

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20 14:10:24 -04:00
Grazvydas Ignotas
cae6247db0 wl1251: fix TSF calculation
Cast MSB part of current TSF to u64 to prevent loss of most
significant bits. MSB should also be shifted by 32.

Patch based on old maemo patch by:
Yuri Kululin <ext-yuri.kululin@nokia.com>
Yuri Ershov <ext-yuri.ershov@nokia.com>

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-20 14:10:24 -04:00
Will Hawkins
3bfda62c50 mac80211: Allow userspace to register for auth frames in IBSS
Set the necessary flags to allow user space applications
to register for authentication frames on IBSS interfaces.
This is useful for situations where userspace applications
want to control key negotiation between stations.

Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org>
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20 20:03:43 +02:00
Will Hawkins
452a6d2261 mac80211: send auth in IBSS only if userspace isn't handling it
Check the auth frame registration count before sending
"open system" authentication messages when a new station
registers on a particular IBSS network. This stops us
from sending out multiple authentication messages with
different authentication algorithms.

Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org>
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20 20:03:42 +02:00
Will Hawkins
6abe056322 mac80211: Track auth frame registrations on IBSS ifaces
Track userspace registrations for authentication
frames received on an IBSS interface. This field
will be used to decide whether or not to send
"open system" authentication frames when a new
station joins an adhoc network.

Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org>
[redesign the code flow a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20 20:03:41 +02:00
Bjorn Helgaas
d6d88c832e PCI: use __weak consistently
Use "__weak" instead of the gcc-specific "__attribute__ ((weak))"

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 10:44:35 -06:00
Wanpeng Li
8356aad430 PCI: cleanup assign_requested_resources_sorted() kernel-doc warning
Warning(drivers/pci/setup-bus.c:277): No description found for parameter 'fail_head'
Warning(drivers/pci/setup-bus.c:277): Excess function parameter 'failed_list' description in 'assign_requested_resources_sorted'

Signed-off-by: Wanpeng Li <liwp.linux@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 10:44:35 -06:00
Linus Torvalds
a4d7a12238 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "This includes three MMCI changes - one to fix up the wrong version of
  the DT support patch which was merged, and two to make deferred
  probing work.  It also includes a fix to the OMAP SPI driver which is
  causing a boot time warning.

  The remainder are very minor ARM fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  SPI: fix over-eager devm_xxx() conversion
  ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOs
  ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0
  ARM: 7425/1: extable: ensure fixup entries are 4-byte aligned
  ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X support
  ARM: 7423/1: kprobes: run t32_simulate_ldr_literal() without insn slot
  ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree boot
2012-06-20 09:42:09 -07:00
Linus Torvalds
61fcbc8dfe pinctrl fixes for the -rc series:
- Fixed a 2-line compile error for MXS
 - A pure documentation fix for Nomadik
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJP4PWNAAoJEEEQszewGV1zE2UQAKRMoeJw97o9NFuHICg3+oMA
 SExUxD9H9Ey5nWtFsjqVkZKkEksdFlDwkdsXoXxsDVZlVNBFM/oxRe3fGiqgEIjN
 /fks/xfFBo7xQPoJw05z8Z/dYKDgchhor5Q7oRWReYMnNhuHccjWdhD0Z7dFG27Q
 Up8purFH3v3qidxXy3jrLG03b+s/wDHTzsGBP2sIJVhUvMkVcoi3AUgjoWE/Qj68
 Ljklf1f5mSzY6YKU4kkpSaickoD8FxxkbTk4qNarFk4RLTxQeFOyqjVN0lFfUjF1
 sUvfnlgeFYy3N3Vp5keI1iBRBuRYBR002WI3T6uorHyM78ssbks5md3BxA/IDff+
 QTdPUCKNAfPqnqmnVBsvtTSb9MrdreBEiSw6j31fzgeN+MipYc2h0BErJPynMKGP
 QWWZrm0q+ux6bf/bsdfpBl7q0RD0d45qihYI7azQq4vV/QfXpFsPxDdFY+edIau4
 TVb3c7xang5cMK7aq+HZ9tBV8v4WvcGg+OSPOitaXyIk4kHmO3E+eYGQ9GsSFxcK
 Jd25v88tXrrip4//fEb6RCRxf1oHeZ8onR8Ex8FsxMh0cMumhXi+VmKEel0UJKux
 42Ti/Pl6CX/FtiU5hwzn6ojwntR9yaQHz7bInzkUgeP8r1fLa96IN2ndoLDv0SEh
 gvFcBaAbZV7WlZV8gLkD
 =zNxH
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull two pinctrl fixes from Linus Walleij:
 - Fixed a 2-line compile error for MXS
 - A pure documentation fix for Nomadik

* tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: document Alt-C glitch
  pinctrl: mxs: Use kfree to fix build error
2012-06-20 09:41:21 -07:00
Eyal Shapira
9ea4fa158f mac80211: fix cleanup if driver suspend callback fails
In case the driver suspend callback fails, mac80211 is left
with stopped queues which prevents any further traffic as well
as all STAs are left marked with WLAN_STA_BLOCK_BA which will
cause any further ADDBA requests to be declined. Fix it by
undoing both before returning from __iee80211_suspend.

Reported-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20 17:39:51 +02:00
Yoni Divinsky
00e96decfd mac80211: save wmm_acm per sdata
Save and configure the wmm_acm per sdata, rather than
per hardware.

If wmm_acm is saved per hardware when running two
interfaces simultaneously on the same hardware one
interface's wmm policy will be affected by the other
interface.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20 17:35:22 +02:00
Luciano Coelho
50ae34a254 mac80211: use the correct capability info in ieee80211_set_associated()
If an AP is beaconing with different capabilities than the one we get
in the associate response, we were still using the capabilities
received in the beacons.  One example is when the AP is beaconing with
the short slot bit set to zero and then we try to connect to it with
long slot.  In this case, we would keep using long slot until the next
beacon was received.

Fix this by using the correct capability value when calling
ieee80211_handle_bss_capability().  We were using cbss->capability,
but we should use the bss_conf->assoc_capability instead.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20 17:32:10 +02:00
Paul Mundt
06d5631f56 sh: pfc: Verify pin type encoding size at build time.
The encoding is tightly packed, and future changes (such as
pinconf-generic support) can easily lead to a situation where we violate
the encoding constraints and trample data bit/reg bits. This plugs in
some sanity checks by way of a BUILD_BUG_ON() to blow up if we fail to
fit.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-21 00:03:41 +09:00
Lars-Peter Clausen
3528f27a5d ASoC: dmaengine-pcm: Add support for querying stream position from DMA driver
Currently the sound dmaengine pcm helper functions implement the pcm_pointer
callback by trying to count the number of elapsed periods. This is done by
advancing the stream position in the dmaengine callback by one period.
Unfortunately there is no guarantee that the callback will be called for each
elapsed period. It may be possible that under high system load it is only called
once for multiple elapsed periods. This patch addresses the issue by
implementing support for querying the current stream position directly from the
dmaengine driver. Since not all dmaengine drivers support reporting the stream
position yet the old period counting implementation is kept for now.

Furthermore the new mechanism allows to report the stream position with a
sub-period granularity, given that the dmaengine driver supports this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 15:39:05 +01:00
Lars-Peter Clausen
9883ab229d ASoC: dmaengine-pcm: Rename and deprecate snd_dmaengine_pcm_pointer
Currently the sound dmaengine pcm helper functions implement the pcm_pointer
callback by trying to count the number of elapsed periods. This is done by
advancing the stream position in the dmaengine callback by one period.
Unfortunately there is no guarantee that the callback will be called for each
elapsed period. It may be possible that under high system load it is only called
once for multiple elapsed periods. This patch renames the current implementation
and documents its shortcomings and that it should not be used anymore in new
drivers.

The next patch will introduce a new snd_dmaengine_pcm_pointer which will be
implemented based on querying the current stream position from the dma device.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by Vinod Koul <vinod.koul@linux.intel.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 15:38:32 +01:00
Lars-Peter Clausen
c32c44cb58 dmaengine: Add wrapper for device_tx_status callback
This patch adds a small inline wrapper for the devivce_tx_status callback of a
dma device. This makes the source code of users of this function a bit more
compact and a bit more legible.

E.g.:
-status = chan->device->device_tx_status(chan, cookie, &state)
+status = dmaengine_tx_status(chan, cookie, &state)

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 15:38:27 +01:00
Takashi Iwai
8b8d654b55 ALSA: hda - Move one-time init codes from generic_hdmi_init()
The codes to initialize work struct or create a proc interface should
be called only once and never although it's called many times through
the init callback.  Move that stuff into patch_generic_hdmi() so that
it's called only once.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 16:32:22 +02:00
Russ Dill
aef2b89662 ARM: OMAP: Fix Beagleboard DVI reset gpio
Commit e813a55eb9 ("OMAP: board-files:
remove custom PD GPIO handling for DVI output") moved TFP410 chip's
powerdown-gpio handling from the board files to the tfp410 driver. One
gpio_request_one(powerdown-gpio, ...) was mistakenly left unremoved in
the Beagle board file. This causes the tfp410 driver to fail to request
the gpio on Beagle, causing the driver to fail and thus the DVI output
doesn't work.

This patch removes several boot errors from board-omap3beagle.c:

 - gpio_request: gpio--22 (DVI reset) status -22
 - Unable to get DVI reset GPIO

There is a combination of leftover code and revision confusion.
Additionally, xM support is currently a hack.

For original Beagleboard this removes the double initialization of GPIO
170, properly configures it as an output, and wraps the initialization
in an if block so that xM does not attempt to request it.

For Beagleboard xM it removes reference to GPIO 129 which was part
of rev A1 and A2 designs, but never functioned. It then properly assigns
beagle_dvi_device.reset_gpio in beagle_twl_gpio_setup and removes the
hack of initializing it high. Additionally, it uses
gpio_set_value_cansleep since this GPIO is connected through i2c.

Unfortunately, there is no way to tell the difference between xM A2 and
A3. However, GPIO 129 does not function on rev A1 and A2, and the TWL
GPIO used on A3 and beyond is not used on rev A1 and A2, there are no
problems created by this fix.

Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20 07:18:21 -07:00
Jon Hunter
95dca12d6b arm/dts: OMAP2: Fix interrupt controller binding
When booting with device-tree on an OMAP2420H4, the kernel is hanging when
initialising the interrupts and following kernel dumps is seen ...

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4()
[    0.000000] unable to get intc registers
[    0.000000] Modules linked in:
[    0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64)
[    0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4)
[    0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288)
[    0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c)
[    0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304)
[    0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044)
[    0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[    0.000000] of_irq_init: children remain, but no parents

The OMAP2 interrupt controller binding is missing the number of interrupts and
interrupt controller register address. Adding these fixes the problem.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20 07:18:20 -07:00
Tony Lindgren
3d09b33fec ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0
Here's one more gpio_to_irq conversion that we missed
earlier. Tested with n800 in gadget mode using USB_ETH.

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20 07:18:15 -07:00
Tony Lindgren
310018d52e ARM: OMAP2+: Fix MUSB ifdefs for platform init code
Commit 62285963 (usb: musb: drop a gigantic amount of ifdeferry)
got rid of a bunch of ifdefs in the MUSB code. Looks like the
platform init code is still using these dropped defines though,
which in many cases results the board defaulting always to host
mode.

Currently the situation is that USB_MUSB_HDRC is the main
Kconfig option with additional USB_GADGET_MUSB_HDRC so only
these two should be used to select between host and OTG mode.

Fix the situation for omaps. The following users should fix the
platform init code in a similar way:

Dropped Kconfig option          Current users

USB_MUSB_OTG                    blackfin, davinci, not in Kconfigs
USB_MUSB_PERIPHERAL             davinci, not in Kconfigs
USB_MUSB_HOST                   davinci, not in Kconfigs
USB_MUSB_HDRC_HCD               blackfin, not in Kconfigs
USB_MUSB_OTG                    blackfin, not in Kconfigs

Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20 07:18:15 -07:00
Paul Mundt
9f65b2b60c sh: pfc: Kill off unused pinmux bias flags.
WANT_PULLUP/DOWN were never interfaced with anything, so just kill them
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-20 22:29:14 +09:00
J. Bruce Fields
4af825041b nfsd4: process_open2 cleanup
Note we can simplify the error handling a little by doing the truncate
earlier.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-20 08:59:43 -04:00
J. Bruce Fields
e1aaa8916f nfsd4: nfsd4_lock() cleanup
Share a little common logic.  And note the comments here are a little
out of date (e.g. we don't always create new state in the "new" case any
more.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-20 08:59:42 -04:00
J. Bruce Fields
9068bed1a3 nfsd4: remove unnecessary comment
For the most part readers of cl_cb_state only need a value that is
"eventually" right.  And the value is set only either 1) in response to
some change of state, in which case it's set to UNKNOWN and then a
callback rpc is sent to probe the real state, or b) in the handling of a
response to such a callback.  UNKNOWN is therefore always a "temporary"
state, and for the other states we're happy to accept last writer wins.

So I think we're OK here.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-20 08:59:41 -04:00
Chuck Lever
7df302f75e NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID.  In addition, RFC 5661 says:

15.1.16.5.  NFS4ERR_STALE_STATEID (Error Code 10023)

   A stateid generated by an earlier server instance was used.  This
   error is moot in NFSv4.1 because all operations that take a stateid
   MUST be preceded by the SEQUENCE operation, and the earlier server
   instance is detected by the session infrastructure that supports
   SEQUENCE.

I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery.  Bruce suggested an additional test that could be
useful to client developers.

Lastly, RFC 5661, section 18.48.3 has this:

 o  Special stateids are always considered invalid (they result in the
    error code NFS4ERR_BAD_STATEID).

An explicit check is made for those state IDs to avoid printk noise.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-20 08:59:40 -04:00
Weston Andros Adamson
2411967305 nfsd: probe the back channel on new connections
Initiate a CB probe when a new connection with the correct direction is added
to a session (IFF backchannel is marked as down).  Without this a
BIND_CONN_TO_SESSION has no effect on the internal backchannel state, which
causes the server to reply to every SEQUENCE op with the
SEQ4_STATUS_CB_PATH_DOWN flag set until DESTROY_SESSION.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-20 08:59:39 -04:00
Jesse Barnes
4a87d65d54 drm/i915: add HDMI and DP port enumeration on ValleyView
ValleyView is similar to IbexPeak here, but with different register
offsets.

v2: use SDVOB instead ov VLV_HDMIB (Daniel)
    drop unnecessary eDP check in DP_C init (Daniel)

eDP support will be coming later from Shobit.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-20 14:52:42 +02:00
Jesse Barnes
7d2c24e8cd drm/i915: add ValleyView specific CRT detect function
Might be able to merge this back in at some point, but we're seeing bugs
with ADPA based detection, so keep it separate for now with explicit
hotplug trigger usage.

v2: drop superfluous debug message
v3: comment forced detection, need to debug (Eugeni)

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-20 14:52:16 +02:00
Shobhit Kumar
98364379e1 drm/i915: Enable DP panel power sequencing for ValleyView
VLV supports two dp panels, there are two set of panel power sequence
registers which needed to be programmed based on the configured
pipe. This patch add supports for the same

Acked-by: Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Beeresh G <beeresh.g@intel.com>
Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Drop the lone hunk and only keep the register definitions - I
loathe incomplete bandaids. Also add a comment that this is for vlv.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-20 14:51:38 +02:00
Sage Weil
642c0dbde3 libceph: flush msgr queue during mon_client shutdown
We need to flush the msgr workqueue during mon_client shutdown to
ensure that any work affecting our embedded ceph_connection is
finished so that we can be safely destroyed.

Previously, we were flushing the work queue after osd_client
shutdown and before mon_client shutdown to ensure that any osd
connection refs to authorizers are flushed.  Remove the redundant
flush, and document in the comment that the mon_client flush is
needed to cover that case as well.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
(cherry picked from commit f3dea7edd3)
2012-06-20 07:43:50 -05:00
Yan, Zheng
b132cf4c73 rbd: Clear ceph_msg->bio_iter for retransmitted message
The bug can cause NULL pointer dereference in write_partial_msg_pages

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
(cherry picked from commit 43643528cc)
2012-06-20 07:43:50 -05:00
Sage Weil
88ed6ea0b2 libceph: use con get/put ops from osd_client
There were a few direct calls to ceph_con_{get,put}() instead of the con
ops from osd_client.c.  This is a bug since those ops aren't defined to
be ceph_con_get/put.

This breaks refcounting on the ceph_osd structs that contain the
ceph_connections, and could lead to all manner of strangeness.

The purpose of the ->get and ->put methods in a ceph connection are
to allow the connection to indicate it has a reference to something
external to the messaging system, *not* to indicate something
external has a reference to the connection.

[elder@inktank.com: added that last sentence]

Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Alex Elder <elder@inktank.com>
(cherry picked from commit 0d47766f14)
2012-06-20 07:43:49 -05:00
Alex Elder
680584fab0 libceph: osd_client: don't drop reply reference too early
In ceph_osdc_release_request(), a reference to the r_reply message
is dropped.  But just after that, that same message is revoked if it
was in use to receive an incoming reply.  Reorder these so we are
sure we hold a reference until we're actually done with the message.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
(cherry picked from commit ab8cb34a4b)
2012-06-20 07:43:48 -05:00
Yan, Zheng
61600ef848 ceph: check PG_Private flag before accessing page->private
I got lots of NULL pointer dereference Oops when compiling kernel on ceph.
The bug is because the kernel page migration routine replaces some pages
in the page cache with new pages, these new pages' private can be non-zero.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
(cherry picked from commit 28c0254ede)
2012-06-20 07:43:48 -05:00
Takashi Iwai
1ade819181 Merge branch 'fix/hda' into topic/hda
The fix for power sequence needs to be merged back to topic branch.
2012-06-20 14:43:20 +02:00
Jan Beulich
0fa0e2f02e x86: Move call to print_modules() out of show_regs()
Printing the list of loaded modules is really unrelated to what
this function is about, and is particularly unnecessary in the
context of the SysRQ key handling (gets printed so far over and
over).

It should really be the caller of the function to decide whether
this piece of information is useful (and to avoid redundantly
printing it).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4FDF21A4020000780008A67F@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-20 14:33:48 +02:00
Jan Beulich
0d26d1d873 x86/mm: Mark free_initrd_mem() as __init
... matching various other architectures.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4FDF1F5C020000780008A661@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-20 14:33:47 +02:00
Jan Beulich
e1b6fc55da x86/microcode: Mark microcode_id[] as __initconst
It's not being used for other than creating module aliases (i.e.
no loadable section has any reference to it).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4FDF1EFD020000780008A65D@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-20 14:33:47 +02:00
Ingo Molnar
6921a575c9 Merge branch 'tip/perf/urgent-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent 2012-06-20 14:26:58 +02:00
Li Zhong
0718467c85 x86/nmi: Clean up register_nmi_handler() usage
Implement a cleaner and easier to maintain version for the section
warning fixes implemented in commit eeaaa96a3a
("x86/nmi: Fix section mismatch warnings on 32-bit").

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Link: http://lkml.kernel.org/r/1340049393-17771-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-20 14:23:17 +02:00
Ingo Molnar
6a991accee Merge commit 'v3.5-rc3' into x86/debug
Merge it in to pick up a fix that we are going to clean up in this
branch.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-20 14:22:34 +02:00
Jesse Barnes
a0c4da24ea drm/i915: ValleyView mode setting limits and PLL functions
Add some VLV limit structures and update the PLL code.

v2: resolve conflicts, Vijay to re-post with PLL valid checks and fixed limits
v3: re-add dpio write function
v4: squash in Vijay's fixes for the PLL limits and clean up the m/n finder

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-20 14:21:23 +02:00
Daniel Vetter
cc889e0f6c drm/i915: disable flushing_list/gpu_write_list
This is just the minimal patch to disable all this code so that we can
do decent amounts of QA before we rip it all out.

The complicating thing is that we need to flush the gpu caches after
the batchbuffer is emitted. Which is past the point of no return where
execbuffer can't fail any more (otherwise we risk submitting the same
batch multiple times).

Hence we need to add a flag to track whether any caches associated
with that ring are dirty. And emit the flush in add_request if that's
the case.

Note that this has a quite a few behaviour changes:
- Caches get flushed/invalidated unconditionally.
- Invalidation now happens after potential inter-ring sync.

I've bantered around a bit with Chris on irc whether this fixes
anything, and it might or might not. The only thing clear is that with
these changes it's much easier to reason about correctness.

Also rip out a lone get_next_request_seqno in the execbuffer
retire_commands function. I've dug around and I couldn't figure out
why that is still there, with the outstanding lazy request stuff it
shouldn't be necessary.

v2: Chris Wilson complained that I also invalidate the read caches
when flushing after a batchbuffer. Now optimized.

v3: Added some comments to explain the new flushing behaviour.

Cc: Eric Anholt <eric@anholt.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-20 13:54:28 +02:00
Ingo Molnar
32c46e579b Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf improvements from Arnaldo Carvalho de Melo:

 * Replace event_name with perf_evsel__name, that handles the event
   modifiers and doesn't use static variables.

 * GTK browser improvements, from Namhyung Kim

 * Fix possible NULL pointer deref in the TUI annotate browser, from
   Samuel Liao

 * Add sort by source file:line number, using addr2line.

 * Allow printing histogram text snapshots at any point in top/report.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-20 13:41:53 +02:00
Zhangfei Gao
c6da0ba8df dmaengine: mmp_tdma: add mmp tdma support
Add support for two-channel dma under dmaengine
support: mmp-adma and pxa910-squ

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Leo Yan <leoy@marvell.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-20 16:28:41 +05:30
Lars-Peter Clausen
3052cc2c92 dmaengine: Add wrapper for device_tx_status callback
This patch adds a small inline wrapper for the devivce_tx_status callback of a
dma device. This makes the source code of users of this function a bit more
compact and a bit more legible.

E.g.:
-status = chan->device->device_tx_status(chan, cookie, &state)
+status = dmaengine_tx_status(chan, cookie, &state)

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-20 16:23:16 +05:30
Rafael J. Wysocki
6816bfa3e8 Merge branch 'renesas-sh73a0' into renesas-soc
* renesas-sh73a0:
  ARM: shmobile: sh73a0: add FSI clock
2012-06-20 12:48:31 +02:00
Kuninori Morimoto
accb90c8f3 ARM: shmobile: kzm9g: enable FSI-AK4648
This patch enable sound playback/capture on CN9/CN10.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20 12:47:22 +02:00