Export symbols for external interfaces, so that they can be used in
other loadable modules.
Export is done under name space IDLE_INJECT.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.
It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.
For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.
Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.
Fixes: b721ca0d19 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because the only member of struct board_info is the name, the
board_info[] array of struct board_info elements can be replaced with
an array of strings.
Modify the code accordingly and drop struct board_info.
No intentional functional impact.
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Use capitals in the names of the board ID symbols and add the PCH_
prefix to each of them for consistency.
Also rename the board_ids enum accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Fold pch_suspend() and pch_resume(), that each have only one caller,
into their respective callers to make the code somewhat easier to
follow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Fold two functions, pch_hw_init() and pch_get_temp(), that each have
only one caller, into their respective callers to make the code somewhat
easier to follow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The same device operations object is pointed to by all of the board
configurations in the driver, so effectively the same operations
callbacks are used by all of them which only adds overhead (that can
be significant due to retpolines) for no real purpose.
For this reason, drop the device operations object and replace the
respective callback invocations by direct calls to the specific
functions that were previously pointed to by callback pointers.
No intentional change in behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Because the same device operations callbacks are used for all supported
boards, they are in fact generic, so rename them to reflect that.
Also rename the operations object itself for consistency.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Both pch_wpt_init() and pch_wpt_get_temp() can return the proper
result via their return values, so they do not need to use return
pointers.
Modify them accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Modify pch_wpt_add_acpi_psv_trip() to return an int value instead of
using a return pointer for that.
While at it, drop an excessive empty code line.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Instead of using snprintf() to populate the ACPI object name in
int340x_thermal_set_trip_temp(), use an appropriate initializer
and make the function fail if its trip argument is greater than 9,
because ACPI object names can only be 4 characters long and it does
not make sense to even try to evaluate objects with longer names (that
argument is guaranteed to be non-negative, because it comes from the
thermal code that will not pass negative trip numbers to zone
callbacks).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The explicit casting from int to unsigned long in
int340x_thermal_get_zone_temp() is pointless, becuase the multiplication
result is cast back to int by the assignment in the same statement, so
drop it.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Rename local variables int34x_thermal_zone in int340x_thermal_zone_add()
and int340x_thermal_zone_remove() to int34x_zone which allows a number
of code lines to be shorter and easier to read and adjust some white
space for consistency.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Improve some inconsistent usage of white space in int340x_thermal_zone.c,
fix up one coding style issue in it (missing braces around an else
branch of a conditional) and while at it replace a !ACPI_FAILURE()
check with an equivalent ACPI_SUCCESS() one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
It is slightly better to make the ACPI thermal helper functions retrieve
the trip point temperature only instead of doing the full trip point
initialization, because they are also used for updating some already
registered trip points, in which case initializing a new trip just
in order to update the temperature of an existing one is somewhat
wasteful.
Modify the ACPI thermal helpers accordingly and update their users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Modify int340x_thermal_zone_add() to register the thermal zone along
with a trip points table, which allows the trip-related zone callbacks
to be dropped, because they are not needed any more.
In order to consolidate the code, use ACPI trip library functions to
populate generic trip points in int340x_thermal_read_trips() and to
update them in int340x_thermal_update_trips().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because the ->get_trip_temp() and ->get_trip_type() thermal zone
callbacks are only invoked from __thermal_zone_get_trip() which is
always called by the thermal core under the zone lock, it is sufficient
for int340x_thermal_update_trips() to acquire the zone lock for mutual
exclusion with those callbacks.
Accordingly, modify int340x_thermal_update_trips() to use the zone lock
instead of the internal trip_mutex and drop the latter which is not
necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is generally invalid to change the trip point indices after they have
been exposed via sysfs.
Moreover, the thermal objects in the ACPI namespace cannot go away and
appear on the fly. In practice, the only thing that can happen when the
INT3403_PERF_TRIP_POINT_CHANGED notification is sent by the platform
firmware is a change of the return values of those thermal objects.
For this reason, add a special function for updating the trip point
temperatures after re-evaluating the respective ACPI thermal objects
and change int3403_notify() to invoke it instead of
int340x_thermal_read_trips() that would change the trip point indices
on errors. Also remove the locking from the latter, because it is only
called before registering the thermal zone and it cannot race with the
zone's callbacks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases it is still useful to register a trip point if the
temperature returned by the corresponding ACPI thermal object (for
example, _HOT) is invalid to start with, because the same ACPI
thermal object may start to return a valid temperature after a
system configuration change (for example, from an AC power source
to battery an vice versa).
For this reason, if the ACPI thermal object evaluated by
thermal_acpi_trip_init() successfully returns a temperature value that
is out of the range of values taken into account, initialize the trip
point using THERMAL_TEMP_INVALID as the temperature value instead of
returning an error to allow the user of the trip point to decide what
to do with it.
Also update pch_wpt_add_acpi_psv_trip() to reject trip points with
invalid temperature values.
Fixes: 7a0e397488 ("thermal: ACPI: Add ACPI trip point routines")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make proc_thermal_pci_probe() register the TCPU_PCI thermal zone along
with the trip point used by it and drop the zone callbacks related to
this trip point that are not needed any more.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is possible that the system manufacturer locks down thermal tuning
beyond what is usually done on the given platform. In that case user
space calibration tools should not try to adjust the thermal
configuration of the system.
To allow user space to check if that is the case, add a new sysfs
attribute "production_mode" that will be present when the ACPI DCFG
method is present under the INT3400 device object in the ACPI Namespace.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().
Fixes: 6757a7abe4 ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().
But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.
To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().
Fixes: 5fbf7f27fa ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal framework gives the possibility to register the trip
points along with the thermal zone. When that is done, no get_trip_*
callbacks are needed and they can be removed.
Convert the existing callbacks content logic into generic trip points
initialization code and register them along with the thermal zone.
In order to consolidate the code, use an ACPI trip library function
to populate a generic trip point.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add library routines to populate a generic thermal trip point
structure with data obtained by evaluating a specific object in the
ACPI Namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add the PCI ID for the Wellsburg C610 series chipset PCH.
The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* thermal: (734 commits)
thermal: core: call put_device() only after device_register() fails
Linux 6.2-rc4
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
kallsyms: Fix scheduling with interrupts disabled in self-test
ata: pata_cs5535: Don't build on UML
lockref: stop doing cpu_relax in the cmpxchg loop
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
efi: tpm: Avoid READ_ONCE() for accessing the event log
io_uring: lock overflowing for IOPOLL
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
iommu/iova: Fix alloc iova overflows issue
iommu: Fix refcount leak in iommu_device_claim_dma_owner
iommu/arm-smmu-v3: Don't unregister on shutdown
iommu/arm-smmu: Don't unregister on shutdown
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
...
-----BEGIN PGP SIGNATURE-----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=1c2L
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux
Pull another io_uring fix from Jens Axboe:
"Just a single fix for a regression that happened in this release due
to a poll change. Normally I would've just deferred it to next week,
but since the original fix got picked up by stable, I think it's
better to just send this one off separately.
The issue is around the poll race fix, and how it mistakenly also got
applied to multishot polling. Those don't need the race fix, and we
should not be doing any reissues for that case. Exhaustive test cases
were written and committed to the liburing regression suite for the
reported issue, and additions for similar issues"
* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
io_uring/poll: don't reissue in case of poll race on multishot request
Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault.)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the mailing
lists where they have sat too long due to me taking a long time to catch
up on my pending patch queue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wBNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk30QCgrdhgSnL4s2o/y0L/nkB4ubg9spkAoJtmRHe4
EYj/RIm7VYef65aIElVT
=Cj+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the
mailing lists where they have sat too long due to me taking a long
time to catch up on my pending patch queue"
* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
VMCI: Use threaded irqs instead of tasklets
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
gsmi: fix null-deref in gsmi_get_variable
misc: fastrpc: Fix use-after-free race condition for maps
misc: fastrpc: Don't remove map on creater_process and device_release
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
misc: fastrpc: fix error code in fastrpc_req_mmap()
mei: me: add meteor lake point M DID
mei: bus: fix unlink on bus in error path
w1: fix WARNING after calling w1_process()
w1: fix deadloop in __w1_remove_master_device()
comedi: adv_pci1760: Fix PWM instruction handling
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
Here are 3 small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wB5g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl+5ACfbXPXK7nokMtxvs/9ybhH+IM63X0AmwYXZ5mK
3dCNVFru/lAZzS7HaR5F
=4fuA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's been
in linux-next this week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wCRA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykjxQCfUhSZNjIy73tZg8haV7jXEVbekvAAoMz3Ploo
7TC1ZzaPkiQfIoagMcua
=UzbQ
-----END PGP SIGNATURE-----
Merge tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's
been in linux-next this week with no reported problems"
* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: fix enum vchiq_status return types
Here are some small tty and serial driver fixes for 6.2-rc5 that resolve
a number of tiny reported issues and some new device ids. They include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wDQA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynGegCguB+ZpDHKt9wccrGP3h/dwT2MAm8AnAqG4bmy
Yw/cHHPt9gx+AW6RBtAL
=EymN
-----END PGP SIGNATURE-----
Merge tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next with
no reported issues. The iowarrior fix passed the 0-day testing and is a
one digit change based on a reported problem in the driver (which was
written to a spec, not the real device that is now available.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wETA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymzQQCbBOPYVF6LWGoUCAi5nFbPgz0yAPYAoMpVH8Gx
iSoT351gbn65LS+45ehc
=mGTv
-----END PGP SIGNATURE-----
Merge tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error messages
when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
-----BEGIN PGP SIGNATURE-----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=m1Ee
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.
This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.
Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c06d ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
-----BEGIN PGP SIGNATURE-----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=x2Ca
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
-----BEGIN PGP SIGNATURE-----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=k4Xk
-----END PGP SIGNATURE-----
Merge tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- important fix for packet signature calculation error
- three fixes to correct DFS deadlock, and DFS refresh problem
- remove an unused DFS function, and duplicate tcon refresh code
- DFS cache lookup fix
- uninitialized rc fix
* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: remove unused function
cifs: do not include page data when checking signature
cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
cifs: handle cache lookup errors different than -ENOENT
cifs: remove duplicate code in __refresh_tcon()
cifs: don't take exclusive lock for updating target hints
cifs: avoid re-lookups in dfs_cache_find()
cifs: fix potential deadlock in cache_refresh_path()
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
-----BEGIN PGP SIGNATURE-----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=8RV7
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix mux route data for rk3568
pinctrl: rockchip: fix reading pull type on rk3568
pinctrl: nomadik: Add missing header(s)
pinctrl: sp7021: fix unused function warning
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their limit
- A theoretical problem with the scatterlist merging code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY8sBzAAKCRCFwuHvBreF
YWMBAP92rk8L3oLrNbYTryNTv8w/LicLhmAvhC42KRy8klvFkAD6A+wskhxmHMgO
aSdznob6peMEyNONZUKcijqjnSXhyAY=
=brq4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their
limit
- A theoretical problem with the scatterlist merging code
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to calculate the last_pg properly
IB/hfi1: Remove user expected buffer invalidate race
IB/hfi1: Immediately remove invalid memory from hardware
IB/hfi1: Fix expected receive setup error exit issues
IB/hfi1: Reserve user expected TIDs
IB/hfi1: Reject a zero-length user expected buffer
RDMA/core: Fix ib block iterator counter overflow
RDMA/rxe: Prevent faulty rkey generation
RDMA/rxe: Fix inaccurate constants in rxe_type_info
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.
Cc: stable@vger.kernel.org
Fixes: 6e5aedb932 ("io_uring/poll: attempt request issue after racy poll wakeup")
Reported-and-tested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/778
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=L12Q
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
-----BEGIN PGP SIGNATURE-----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=/7Uv
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Fixes for the MSG_RING opcode. Nothing really major:
- Fix an overflow missing serialization around posting CQEs to the
target ring (me)
- Disable MSG_RING on a ring that isn't enabled yet. There's nothing
really wrong with allowing it, but 1) it's somewhat odd as nobody
can receive them yet, and 2) it means that using the right delivery
mechanism might change. As nobody should be sending CQEs to a ring
that isn't enabled yet, let's just disable it (Pavel)
- Tweak to when we decide to post remotely or not for MSG_RING
(Pavel)"
* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
io_uring/msg_ring: fix remote queue to disabled ring
io_uring/msg_ring: fix flagging remote execution
io_uring/msg_ring: fix missing lock on overflow for IOPOLL
io_uring/msg_ring: move double lock/unlock helpers higher up
-----BEGIN PGP SIGNATURE-----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=Kqrg
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential out-of-bounds access to leaf data when seeking in an
inline file
- fix potential crash in quota when rescan races with disable
- reimplement super block signature scratching by marking page/folio
dirty and syncing block device, allow removing write_one_page
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between quota rescan and disable leading to NULL pointer deref
btrfs: fix invalid leaf access due to inline extent during lseek
btrfs: stop using write_one_page in btrfs_scratch_superblock
btrfs: factor out scratching of one regular super block
This Kselftest fixes update for Linux 6.2-rc5 consists of a single
fix address error seen during unconfigured LLVM builds.
-----BEGIN PGP SIGNATURE-----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=O4Lm
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"Fix an error seen during unconfigured LLVM builds"
* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix error message for unconfigured LLVM builds
Modify __thermal_cooling_device_register() to make it call
put_device() after invoking device_register() and fix up a few
error paths calling thermal_cooling_device_destroy_sysfs()
unnecessarily (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=X6Th
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Modify __thermal_cooling_device_register() to make it call
put_device() after invoking device_register() and fix up a few error
paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
(Viresh Kumar)"
* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: call put_device() only after device_register() fails
- Update the ACPICA development list address in MAINTAINERS to the new
one that does not bounce (Rafael Wysocki).
- Check whether EFI runtime is available when registering the ACPI PRM
address space handler and when running it (Ard Biesheuvel).
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=2v8+
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These update the ACPICA entry in MAINTAINERS, add a backlight handling
quirk and fix the ACPI PRM (platform runtime) mechanism support.
Specifics:
- Update the ACPICA development list address in MAINTAINERS to the
new one that does not bounce (Rafael Wysocki)
- Check whether EFI runtime is available when registering the ACPI
PRM address space handler and when running it (Ard Biesheuvel)
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede)"
* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Check whether EFI runtime is available
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
MAINTAINERS: Update the ACPICA development list address
