Rename the "sh" folder to "renesas" to better reflect the Renesas-specific
drivers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241025150511.722040-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init.
zynqmp_dpsub_kms_init creates the connector and without it we don't
enable hotplug detection.
Fixes: eb2d64bfcc ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
layer->info can be null if we have an error on the first layer in
zynqmp_disp_create_layers
Fixes: 1836fd5ed9 ("drm: xlnx: zynqmp_dpsub: Minimize usage of global flag")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028133941.54264-1-lists@steffen.cc
Add a debugfs interface for exercising the various test modes supported
by the DisplayPort controller. This allows performing compliance
testing, or performing signal integrity measurements on a failing link.
At the moment, we do not support sink-driven link quality testing,
although such support would be fairly easy to add.
Additionally, add some debugfs files for ignoring AUX errors and HPD
events, as this can allow testing with equipment that cannot emulate a
DPRX.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
[Tomi: fixed a few minor formatting issues]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev
Add a non-locking version of zynqmp_dp_bridge_detect and use it in
zynqmp_dp_hpd_work_func so we can take the lock explicitly. This will
make it easier to check for hpd_ignore when we add debugfs support.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-8-sean.anderson@linux.dev
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
In preparation for supporting compliance testing, split off several
helper functions. No functional change intended.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-7-sean.anderson@linux.dev
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
<TASK>
get_info+0x128/0x180
do_ip6t_get_ctl+0x6a/0x430
nf_getsockopt+0x46/0x80
ipv6_getsockopt+0xb9/0x100
rawv6_getsockopt+0x42/0x190
do_sock_getsockopt+0xaa/0x180
__sys_getsockopt+0x70/0xc0
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0xa2/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it.
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that all of the sleeping work is done outside of the IRQ, we can
convert it to a hard IRQ. Shared IRQs may be triggered even after
calling disable_irq, so use free_irq instead which removes our callback
altogether.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-5-sean.anderson@linux.dev
Retraining the link can take a while, and might involve waiting for
DPCD reads/writes to complete. In preparation for unthreading the IRQ
handler, move this into its own work function.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-4-sean.anderson@linux.dev
Add some locking to prevent the IRQ/workers/bridge API calls from stepping
on each other's toes. This lock protects:
- Non-atomic registers configuring the link. That is, everything but the
IRQ registers (since these are accessed in an atomic fashion), and the DP
AUX registers (since these don't affect the link). We also access AUX
while holding this lock, so it would be very tricky to support.
- Link configuration. This is effectively everything in zynqmp_dp which
isn't read-only after probe time. So from next_bridge onward.
This lock is designed to protect configuration changes so we don't have to
do anything tricky. Configuration should never be in the hot path, so I'm
not worried about performance.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-3-sean.anderson@linux.dev
During reset, cmd to destroy resources such as qp, cq, and mr may fail,
and error logs will be printed. When a large number of resources are
destroyed, there will be lots of printings, and it may lead to a cpu
stuck.
Delete some unnecessary printings and replace other printing functions
in these paths with the ratelimited version.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The hem code is executed before ib_dev is registered, so use dev_*
printing instead of ibdev_* to avoid log like this:
(null): set HEM address to HW failed!
Fixes: 2f49de21f3 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The sub-directory of hns_roce debugfs is named after the device's
kernel name currently, but it will be inconvenient to use when
the device is renamed.
Modify the name to pci name as users can always easily find the
correspondence between an RDMA device and its pci name.
Fixes: eb7854d63d ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
QP needs to be modified to IB_QPS_ERROR to trigger HW flush cqe. But
when this process races with destroy qp, the destroy-qp process may
modify the QP to IB_QPS_RESET first. In this case flush cqe will fail
since it is invalid to modify qp from IB_QPS_RESET to IB_QPS_ERROR.
Add lock and bit flag to make sure pending flush cqe work is completed
first and no more new works will be added.
Fixes: ffd541d457 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-3-huangjunxian6@hisilicon.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
eq_db_ci is updated only after all AEQEs are processed in the AEQ
interrupt handler, which is not timely enough and may result in
AEQ overflow. Two optimization methods are proposed:
1. Set an upper limit for AEQE processing.
2. Move time-consuming operations such as printings to the bottom
half of the interrupt.
cmd events and flush_cqe events are still fully processed in the top half
to ensure timely handling.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch assert_chv_phy_status() and its
callers to it. Main motivation to do just one function is to stop
passing i915 to intel_de_wait(), so its generic wrapper can be removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de6b01e1f21934ff520aa3b49ab5f97cbbf028f2.1730146000.git.jani.nikula@intel.com
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch vlv_wait_port_ready() over to
it. The main motivation to do just one function is to stop passing i915
to intel_de_wait(), so its generic wrapper can be removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9505ea49dfc8c7a52cacd2749875a680b01e5bbd.1730146000.git.jani.nikula@intel.com
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch Cx0 PHY code over to it.
v2: Rebase, split out the include cleanups (Rodrigo)
v3: Rebase
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029160822.800097-1-jani.nikula@intel.com
Last email from York Sun is from 2019, so move him to Credits. Frank Li
volunteered to keep maintaining the driver, add him as a reviewer for now.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241003193348.102234-1-krzysztof.kozlowski@linaro.org
Implements platform profile support for Dell laptops with new WMAX thermal
interface, present on some Alienware X-Series, Alienware M-Series and
Dell's G-Series laptops. This interface is suspected to be used by
Alienware Command Center (AWCC), which is not available for linux
systems, to manage thermal profiles.
This implementation makes use of three WMI methods, namely
THERMAL_CONTROL, THERMAL_INFORMATION and GAME_SHIFT_STATUS, which take
u32 as input and output arguments. Each method has a set of supported
operations specified in their respective enums.
Not all models with WMAX WMI interface support these methods. Because of
this, models have to manually declare support through new quirks
`thermal` for THERMAL_CONTROL and THERMAL_INFORMATION and `gmode` for
GAME_SHIFT_STATUS.
Wrappers written for these methods support multiple operations.
THERMAL_CONTROL switches thermal modes through operation
ACTIVATE_PROFILE. Available thermal codes are auto-detected at runtime
and matched against a list of known thermal codes:
Thermal Table "User Selectable Thermal Tables" (USTT):
BALANCED 0xA0
BALANCED_PERFORMANCE 0xA1
COOL 0xA2
QUIET 0xA3
PERFORMANCE 0xA4
LOW_POWER 0xA5
Thermal Table Basic:
QUIET 0x96
BALANCED 0x97
BALANCED_PERFORMANCE 0x98
PERFORMANCE 0x99
Devices are known to implement only one of these tables without mixing
their thermal codes.
The fact that the least significant digit of every thermal code is
consecutive of one another is exploited to efficiently match codes
through arrays.
Autodetection of available codes is done through operation LIST_IDS of
method THERMAL_INFORMATION. This operation lists fan IDs, CPU sensor ID,
GPU sensor ID and available thermal profile codes, *in that order*. As
number of fans and thermal codes is very model dependent, almost every
ID is scanned and matched based on conditions found on
is_wmax_thermal_code(). The known upper bound for the number of IDs is
13, corresponding to a device that have 4 fans, 2 sensors and 7 thermal
codes.
Additionally G-Series laptops have a key called G-key, which (with AWCC
proprietary driver) switches the thermal mode to an special mode named
GMODE with code 0xAB and changes Game Shift Status to 1. Game Shift is a
mode the manufacturer claims, increases gaming performance.
GAME_SHIFT_STATUS method is used to mimic this behavior when selecting
PLATFORM_PROFILE_PERFORMANCE option.
All of these profiles are known to only change fan speed profiles,
although there are untested claims that some of them also change power
profiles.
Activating a thermal mode with method THERMAL_CONTROL may cause short
hangs. This is a known problem present on every platform.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241030001124.7589-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
alienware_wmax_command() now takes void * and size_t instead of struct
wmax_basic_args to extend support to new WMAX methods. Also int *out_data
was changed to u32 *out_data, because new interface specifies u32 as output
parameter and all previous callers would pass u32 * regardless.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241030001057.7562-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixed inconsistent indentation and removed unnecessary (acpi_size) and
(u32 *) casts.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241030001028.7402-2-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is no need to ask the user about enabling UHS-II support, as all
drivers that support UHS2-capable devices already select MMC_SDHCI_UHS2.
Hence make the symbol invisible, unless when compile-testing.
Fixes: 2af7dd8b64 ("mmc: sdhci: add UHS-II module and add a kernel configuration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-ID: <079f2b7473d34895843ad278d79930c681385b2e.1730282633.git.geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The host->ops pointer can't be NULL in sdhci_uhs2_do_detect_init(). Let's
drop the redundant check.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410271835.tqz9s9JV-lkp@intel.com/
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241030015326.2289070-1-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The error path didn't manage the removal of the allocated mmc_card
correctly. Let's fix this to avoid potential memory leaks.
While at it, move the assignment of host->card to slightly later in the
init process and drop also a somewhat silly dev_warn() when CMD8 fails.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241029131752.226764-4-ulf.hansson@linaro.org>
In sd_uhs2_reinit() the call to sd_uhs2_power_up() lacks error handling, so
let's add it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241029131752.226764-3-ulf.hansson@linaro.org>
Drop the redundant err-parameter and just return the result from
host->ops->uhs2_control() instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241029131752.226764-2-ulf.hansson@linaro.org>
Directly return the error from xfs_bmap_longest_free_extent instead
of breaking from the loop and handling it there, and use a done
label to directly jump to the exist when we found a suitable perag
structure to reduce the indentation level and pag/max_pag check
complexity in the tail of the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory.
Reported-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Fixes: f8f1ed1ab3 ("xfs: return a referenced perag from filestreams allocator")
Cc: <stable@vger.kernel.org> # v6.3
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Recently, we found that the CPU spent a lot of time in
xfs_alloc_ag_vextent_size when the filesystem has millions of fragmented
spaces.
The reason is that we conducted much extra searching for extents that
could not yield a better result, and these searches would cost a lot of
time when there were millions of extents to search through. Even if we
get the same result length, we don't switch our choice to the new one,
so we can definitely terminate the search early.
Since the result length cannot exceed the found length, when the found
length equals the best result length we already have, we can conclude
the search.
We did a test in that filesystem:
[root@localhost ~]# xfs_db -c freesp /dev/vdb
from to extents blocks pct
1 1 215 215 0.01
2 3 994476 1988952 99.99
Before this patch:
0) | xfs_alloc_ag_vextent_size [xfs]() {
0) * 15597.94 us | }
After this patch:
0) | xfs_alloc_ag_vextent_size [xfs]() {
0) 19.176 us | }
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Extsize should only be allowed to be set on files with no data in it.
For this, we check if the files have extents but miss to check if
delayed extents are present. This patch adds that check.
While we are at it, also refactor this check into a helper since
it's used in some other places as well like xfs_inactive() or
xfs_ioctl_setattr_xflags()
**Without the patch (SUCCEEDS)**
$ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536'
wrote 1024/1024 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec)
**With the patch (FAILS as expected)**
$ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536'
wrote 1024/1024 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec)
xfs_io: FS_IOC_FSSETXATTR testfile: Invalid argument
Fixes: e94af02a9c ("[XFS] fix old xfs_setattr mis-merge from irix; mostly harmless esp if not using xfs rt")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Previous patch added ops->release_domain support. Core will attach
devices to release_domain->attach_dev() before calling this function.
Devices are already detached their current domain and attached to
blocked domain.
This is mostly dummy function now. Just throw warning if device is still
attached to domain.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In release path, remove device from existing domain and attach it to
blocked domain. So that all DMAs from device is blocked.
Note that soon blocked_domain will support other ops like
set_dev_pasid() but release_domain supports only attach_dev ops.
Hence added separate 'release_domain' variable.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Ideally in attach device path, it should take dev_data lock before
making changes to device data including IOPF enablement. So far dev_data
was using spinlock and it was hitting lock order issue when it tries to
enable IOPF. Hence Commit 526606b0a1 ("iommu/amd: Fix Invalid wait
context issue") moved IOPF enablement outside dev_data->lock.
Previous patch converted dev_data lock to mutex. Now its safe to call
amd_iommu_iopf_add_device() with dev_data->mutex. Hence move back PCI
device capability enablement (ATS, PRI, PASID) and IOPF enablement code
inside the lock. Also in attach_device(), update 'dev_data->domain' at
the end so that error handling becomes simple.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
