Currently in attach device path it takes dev_data->spinlock. But as per
design attach device path can sleep. Also if device is PRI capable then
it adds device to IOMMU fault handler queue which takes mutex. Hence
currently PRI enablement is done outside dev_data lock.
Covert dev_data lock from spinlock to mutex so that it follows the
design and also PRI enablement can be done properly.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
attach_device() is just holding lock and calling do_attach(). There is
not need to have another function. Just move do_attach() code to
attach_device(). Similarly move do_detach() code to detach_device().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently attach device path takes protection domain lock followed by
dev_data lock. Most of the operations in this function is specific to
device data except pdom_attach_iommu() where it updates protection
domain structure. Hence reduce the scope of protection domain lock.
Note that this changes the locking order. Now it takes device lock
before taking doamin lock (group->mutex -> dev_data->lock ->
pdom->lock). dev_data->lock is used only in device attachment path.
So changing order is fine. It will not create any issue.
Finally move numa node assignment to pdom_attach_iommu().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All devices attached to a protection domain must be freed before
calling domain free. Hence do not try to free devices in domain
free path. Continue to throw warning if pdom->dev_list is not empty
so that any potential issues can be fixed.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
protection_domain structure is updated to use xarray to track the IOMMUs
attached to the domain. Now domain flush code is not using amd_iommus.
Hence remove this unused variable.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
protection_domain->dev_list tracks list of attached devices to
domain. We can use list_* functions on dev_list to get device count.
Hence remove 'dev_cnt' variable.
No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241030063556.6104-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for Airoha EN7581 GPIO System Controller which provide a
register map for controlling the GPIO, pinctrl and PWM of the SoC via
dedicated pinctrl and pwm child nodes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-4-afb0cbcab0ec@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds the chip-scu document bindings for EN7581 SoC.
The airoha chip-scu block provides a configuration interface for clock,
io-muxing and other functionalities used by multiple controllers (e.g.
clock, pinctrl, ecc.) on EN7581 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-1-afb0cbcab0ec@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With the last external caller of bus_iommu_probe() now gone, make it
internal as it really should be.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/a7511a034a27259aff4e14d80a861d3c40fbff1e.1730136799.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP driver uses the generic "iommus" DT binding but is the final
holdout not implementing a corresponding .of_xlate method. Unfortunately
this now results in __iommu_probe_device() failing to find ops due to
client devices missing the expected IOMMU fwnode association. The legacy
DT parsing in omap_iommu_probe_device() could probably all be delegated
to generic code now, but for the sake of an immediate fix, just add a
minimal .of_xlate implementation to allow client fwspecs to be created
appropriately, and so the ops lookup to work again.
This means we also need to register the additional instances on DRA7 so
that of_iommu_xlate() doesn't defer indefinitely waiting for their ops
either, but we'll continue to hide them from sysfs just in case. This
also renders the bus_iommu_probe() call entirely redundant.
Reported-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/linux-iommu/0dbde87b-593f-4b14-8929-b78e189549ad@ti.com/
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/linux-media/A7C284A9-33A5-4E21-9B57-9C4C213CC13F@goldelico.com/
Fixes: 17de3f5fdd ("iommu: Retire bus ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/cfd766f96bc799e32b97f4664707adbcf99097b0.1730136799.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Secondary preemption buffer is accessible by NPU's DMA and can be
allocated with addresses above 4 GB. Move secondary preemption buffer
allocation from SHAVE range which is much smaller (2GB) to DMA range.
This allows to allocate more command queues with corresponding
preemption buffers without running out of address range.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-12-jacek.lawrynowicz@linux.intel.com
Increase DMA address range to:
* 128 GB on 37xx (due to MMU limitations)
* 256 GB on other generations
Merge User and DMA ranges on 40xx and above as it is possible
to access whole 256 GBs from both FW and DMA.
Increase User range on 37xx from 255MB to 511MB
to allow loading very large models.
Do not set global_alias_pio_base/size on other generations than 37xx
as it's only used on 37xx anyway.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-11-jacek.lawrynowicz@linux.intel.com
Add CONFIG_DRM_ACCEL_IVPU_DEBUG option that:
- Adds -DDEBUG that enables printk regardless of the kernel config
- Enables unsafe module params (that are now disabled by default)
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-10-jacek.lawrynowicz@linux.intel.com
Do not allocate preemption buffers when Mid Inference Preemption (MIP)
is disabled through test mode.
Rename IVPU_TEST_MODE_PREEMPTION_DISABLE to IVPU_TEST_MODE_MIP_DISABLE
to better describe that this test mode only disables MIP - job level
preemption will still occur.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-9-jacek.lawrynowicz@linux.intel.com
Use XArray for dynamic command queue ID allocations instead of fixed
ones. This is required by upcoming changes to UAPI that will allow to
manage command queues by user space instead of having predefined number
of queues in a context.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-8-jacek.lawrynowicz@linux.intel.com
Remove custom ivpu_id_alloc() wrapper used for ID allocations
and replace it with standard xa_alloc_cyclic() API.
The idea behind ivpu_id_alloc() was to have monotonic IDs, so the driver
is easier to debug because same IDs are not reused all over. The same
can be achieved just by using appropriate Linux API.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-7-jacek.lawrynowicz@linux.intel.com
Ensure that all buffers that were created only partially through
allocated scatter-gather table are unmapped from MMU600 in case of errors.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-6-jacek.lawrynowicz@linux.intel.com
Don't leave a context descriptor in case CFGI_ALL flush fails.
Mark it as invalid (by clearing valid bit) so nothing is left in
partially-initialized state.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-5-jacek.lawrynowicz@linux.intel.com
Copy engine was deprecated by the FW and is no longer supported.
Compute engine includes all copy engine functionality and should be used
instead.
This change does not affect user space as the copy engine was never
used outside of a couple of tests.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-4-jacek.lawrynowicz@linux.intel.com
Defer root page table allocation and unify context init/fini functions.
Move allocation of the root page table from the file_priv_open function to
perform a lazy allocation approach during ivpu_bo_pin().
By doing so, we avoid the overhead of allocating page tables for simple
operations like GET_PARAM that do not require them.
Additionally, the MMU context descriptor table initialization has been
moved to the ivpu_mmu_context_map_page function.
This change streamlines the process and ensures that the descriptor table
is only initialized when it is actually needed.
Refactor init/fini functions to remove redundant code and make the context
management more straightforward.
Overall, these changes lead to a reduction in the time taken by the file
descriptor open operation, as the costly root page table allocation is now
avoided for operations that do not require it.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-3-jacek.lawrynowicz@linux.intel.com
Allow TILE_FUSE register to disable more than 1 tile.
The driver should not prevent such configurations from being functional.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-2-jacek.lawrynowicz@linux.intel.com
The NOC firewall interrupt means that the HW prevented
unauthorized access to a protected resource, so there
is no need to trigger device reset in such case.
To facilitate security testing add firewall_irq_counter
debugfs file that tracks firewall interrupts.
Fixes: 8a27ad81f7 ("accel/ivpu: Split IP and buttress code")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017144958.79327-1-jacek.lawrynowicz@linux.intel.com
Add support for defining aliases for subplatform groups, such as HSW/BDW
ULT that covers both ULT and ULX.
ULT is a special case, because we slightly abuse the ULT subplatform
both as a subplatform and group, but with the way this is defined, it
should be fairly clear.
This follows i915 core and IS_HASWELL_ULT()/IS_BROADWELL_ULT()
conventions, i.e. "is ULT" also matches ULX platforms.
Note: Pedantically, this should have been done earlier, but it's only
feasible now that we no longer have a subplatform enum and can actually
initialize multiple subplatforms.
v2: Use the subplatform group idea
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d148b6210a561b874642ae3e0ad10073d0615de7.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Facilitate using display->platform.haswell and
display->platform.haswell_ult etc. for identifying platforms and
subplatforms.
Merge the platform and subplatform bitmaps together, and check that
there's no overlap.
v4:
- Lower case, s/is/platform/
v3:
- Fix sanity check on display->is after merging subplatform members
v2:
- Use bitmap ops
- Add some sanity checks with warnings
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2ae79637390372903a9808b5adc4d2dcf2c5959b.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a structure with a bitfield member for each platform and
subplatform, and initialize them in platform and subplatform descs.
The structure also contains a bitmap in a union for easier manipulation
of the bits. This, in turn, requires a bit of trickery with
INTEL_DISPLAY_PLATFORMS() to count the number of bits required for
DECLARE_BITMAP().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf1d828cd333d34862ad3198e282c9d294c6e1ad.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make it easier to change the underlying structures by using a macro
similar to PLATFORM() for initialization.
The subplatform names in debug logs change slightly as they now reflect
the enum rather than manually entered names. For example, RAPTORLAKE_S
rather than RPL-S.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4c9d7ea779475513db68e843c970a4dd8f8ac2c.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
cpufreq_cpu_get_raw() may return NULL if the cpu is not in
policy->cpus cpu mask and it will cause null pointer dereference,
so check NULL for cppc_get_cpu_cost().
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a simple file stressor that lives directly in-tree. This will create
a bunch of processes that each open 500 file descriptors and then use
close_range() to close them all.
Concurrently, other processes read /proc/<pid>/fd/ which rougly does
f = fget_task_next(p, &fd);
if (!f)
break;
data.mode = f->f_mode;
fput(f);
Which means that it'll try to get a reference to a file in another
task's file descriptor table.
Under heavy file load it is increasingly likely that the other task will
manage to close @file and @file will be recycled due to
SLAB_TYPEAFE_BY_RCU concurrently. This will trigger various warnings in
the file reference counting code.
Link: https://lore.kernel.org/r/20241021-vergab-streuen-924df15dceb9@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Christian Brauner <brauner@kernel.org> says:
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop it has
O(N^2) behaviour under contention with N concurrent operations and it is
in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make this
work and requiring rcu protection for the data structure in question.
This not just scales better it also introduces overflow protection.
However, in contrast to generic rcuref, files require a memory barrier
and thus cannot rely on *_relaxed() atomic operations and also require
to be built on atomic_long_t as having massive amounts of reference
isn't unheard of even if it is just an attack.
As suggested by Linus, add a file specific variant instead of making
this a generic library.
I've been testing this with will-it-scale using a multi-threaded fstat()
on the same file descriptor on a machine that Jens gave me access (thank
you very much!):
processor : 511
vendor_id : AuthenticAMD
cpu family : 25
model : 160
model name : AMD EPYC 9754 128-Core Processor
and I consistently get a 3-5% improvement on workloads with 256+ and
more threads comparing v6.12-rc1 as base with and without these patches
applied.
* patches from https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-0-387e24dc9163@kernel.org:
fs: port files to file_ref
fs: add file_ref
fs: protect backing files with rcu
Link: https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-0-387e24dc9163@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
