Replace a similar chunk of code in amd_pstate_register_driver() with
amd_pstate_set_driver() call.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241017100528.300143-3-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Replace a similar chunk of code in amd_pstate_init() with
amd_pstate_register() call.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241017100528.300143-2-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
According to the AMD architectural programmer's manual volume 2 [1], in
section "17.6.4.1 CPPC_CAPABILITY_1" lowest_nonlinear_perf is described
as "Reports the most energy efficient performance level (in terms of
performance per watt). Above this threshold, lower performance levels
generally result in increased energy efficiency. Reducing performance
below this threshold does not result in total energy savings for a given
computation, although it reduces instantaneous power consumption". So
lowest_nonlinear_perf is the most power efficient performance level, and
going below that would lead to a worse performance/watt.
Also, setting the minimum frequency to lowest_nonlinear_freq (instead of
lowest_freq) allows the CPU to idle at a higher frequency which leads
to more time being spent in a deeper idle state (as trivial idle tasks
are completed sooner). This has shown a power benefit in some systems,
in other systems, power consumption has increased but so has the
throughput/watt.
Modify the initial policy_data->min set by cpufreq-core to
lowest_nonlinear_freq, in the ->verify() callback. Also set the
cpudata->req[0] to FREQ_QOS_MIN_DEFAULT_VALUE (i.e. 0), so that it also
gets overriden by the check in verify function.
Link: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24593.pdf [1]
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241017053927.25285-3-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Merge the two verify() callback functions and rename the
cpufreq_policy_data argument for better readability.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241017053927.25285-2-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The EPP value doesn't need to be cached to the CPPC request in
amd_pstate_epp_update_limit() because it's passed as an argument
at the end to amd_pstate_set_epp() and stored at that time.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When the EPP updates are set the maximum capable frequency for the
CPU is used to set the upper limit instead of that of the policy.
Adjust amd_pstate_epp_update_limit() to reuse policy calculation code
from amd_pstate_update_min_max_limit().
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When boost is changed the CPPC value is changed in amd_pstate_cpu_boost_update()
but then changed again when refresh_frequency_limits() and all it's callbacks
occur. The first is a pointless write, so instead just update the limits for
the policy and let the policy refresh anchor everything properly.
Fixes: c8c68c38b5 ("cpufreq: amd-pstate: initialize core precision boost state")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Existing function names "cppc_*" and "pstate_*" for shared memory and
MSR based systems are not intuitive enough, replace them with "shmem_*" and
"msr_*" respectively.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240917091434.10685-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The PN553 is another NFC chip from NXP, document the compatible in the
bindings.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241020205615.211256-2-danila@jiaxyga.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Access flag definition in MR and QP is different
in FW. Currently both reg/bind MR and modify/query QP uses
the same flags. Add a different function to map
the QP access flags for newer adapters.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
RoCE message rate performance is heavily degraded
without the use of cq coalescing. With proper coalescing,
message rates get better. Furthermore, coalescing
significantly reduces contention on the PCIe Root
Complex/Memory subsystems.
Add the changes to configure CQ rx colascing parameters
based on adapter revision when CQ is created.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Modify QP improvements are for state transitions
from INIT -> RTR and RTR -> RTS.
In order to support the Modify QP Optimization feature,
the driver is expected to check for the feature support
in the CMDQ_QUERY_FUNC and register its support for this
feature with the FW in CMDQ_INITIALIZE_FIRMWARE.
Additionally, the driver is required to specify the new
fields and attribute masks for the transitions as follows:
1. INIT -> RTR:
- New fields: srq_used, type.
- enable srq_used when RC QP is configured to use SRQ.
- set the type based on the QP type.
- Mandatory masks:
- RC: CMDQ_MODIFY_QP_MODIFY_MASK_ACCESS,
CMDQ_MODIFY_QP_MODIFY_MASK_PKEY
- UD QP and QP1: CMDQ_MODIFY_QP_MODIFY_MASK_PKEY,
CMDQ_MODIFY_QP_MODIFY_MASK_QKEY
2. RTR -> RTS:
- New fields: type
- set the type based on the QP type.
- Mandatory masks:
- RC: CMDQ_MODIFY_QP_MODIFY_MASK_ACCESS
- UD QP and QP1: CMDQ_MODIFY_QP_MODIFY_MASK_QKEY
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Tushar Rane <tushar.rane@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
blk_rq_map_user_bvec currently only has ad-hoc checks for queue limits,
and the last fix to it enabled valid NVMe I/O to pass, but also allowed
invalid one for drivers that set a max_segment_size or seg_boundary
limit.
Fix it once for all by using the bio_split_rw_at helper from the I/O
path that indicates if and where a bio would be have to be split to
adhere to the queue limits, and it returns a positive value, turn that
into -EREMOTEIO to retry using the copy path.
Fixes: 2ff9494418 ("block: fix sanity checks in blk_rq_map_user_bvec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241028090840.446180-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drm_gpu_scheduler.submit_wq is used to submit jobs, jobs are in the path
of dma-fences, and dma-fences are in the path of reclaim. Mark scheduler
work queue with WQ_MEM_RECLAIM to ensure forward progress during
reclaim; without WQ_MEM_RECLAIM, work queues cannot make forward
progress during reclaim.
v2:
- Fixes tags (Philipp)
- Reword commit message (Philipp)
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 34f50cc644 ("drm/sched: Use drm sched lockdep map for submit_wq")
Fixes: a6149f0393 ("drm/sched: Convert drm scheduler to use a work queue rather than kthread")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023235917.1836428-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Convert device binding doc zii,rave-sp-wdt.txt to yaml format.
Additional changes:
- Ref to watchdog.yaml.
- Remove mfd node in example.
- Remove eeprom part in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-4-0ab730607422@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
Additional changes:
- add ref to input.yaml.
- remove mfd node in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-1-0ab730607422@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
PCI Express Interface PMU includes various performance counters
to monitor the data that is transmitted over the PCIe link. The
counters track various inbound and outbound transactions which
includes separate counters for posted/non-posted/completion TLPs.
Also, inbound and outbound memory read requests along with their
latencies can also be monitored. Address Translation Services(ATS)events
such as ATS Translation, ATS Page Request, ATS Invalidation along with
their corresponding latencies are also supported.
The performance counters are 64 bits wide.
For instance,
perf stat -e ib_tlp_pr <workload>
tracks the inbound posted TLPs for the workload.
Co-developed-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Gowthami Thiagarajan <gthiagarajan@marvell.com>
Link: https://lore.kernel.org/r/20241028055309.17893-1-gthiagarajan@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20240830012344.603704-1-lizetao1@huawei.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Armv8.9/9.4 PMUv3.9 adds per counter EL0 access controls. Per counter
access is enabled with the UEN bit in PMUSERENR_EL1 register. Individual
counters are enabled/disabled in the PMUACR_EL1 register. When UEN is
set, the CR/ER bits control EL0 write access and must be set to disable
write access.
With the access controls, the clearing of unused counters can be
skipped.
KVM also configures PMUSERENR_EL1 in order to trap to EL2. UEN does not
need to be set for it since only PMUv3.5 is exposed to guests.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241002184326.1105499-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 0aaa8977ac ("configs: introduce debug.config for CI-like setup")
added CONFIG_PROVE_RCU_LIST=y to the common CI config,
but RCU_EXPERT is not set, and it's a dependency for
CONFIG_PROVE_RCU_LIST=y. Make sure CIs take advantage
of CONFIG_PROVE_RCU_LIST=y, recent fixes in networking
indicate that it does catch bugs.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241016011144.3058445-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cxl_probe_component_regs() the error message "Couldn't locate the
CXL.cache and CXL.mem capability array header." is potentially a false
positive error condition.
Downgrade the message from error level to debug level by using dev_dbg()
to print the message, and the end users won't worry about the message
anymore.
[djbw/iweiny: Fix up changelog]
Reported-by: Kelvin Shieh <kshieh@lenovo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20241021050443.318712-1-colyli@suse.de
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add sysfs attribute for CXL 1.1 device link status to the cxl pci device.
In CXL1.1, the link status of the device is included in the RCRB mapped to
the memory mapped register area. Critically, that arrangement makes the
link status and control registers invisible to existing PCI user tooling.
Export those registers via sysfs with the expectation that PCI user
tooling will alternatively look for these sysfs files when attempting to
access to these CXL 1.1 endpoints registers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kobayashi,Daisuke <kobayashi.da-06@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20241002011549.408412-3-kobayashi.da-06@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add rcd_pcie_cap and its initialization to cache the offset of cxl1.1
device link status information. By caching it, avoid the walking
memory map area to find the offset when output the register value.
Given that this solution involves port lookups via cxl_pci_find_port()
and multiple exit paths where that reference needs to be dropped,
introduce a new put_cxl_root() scope-based-free handler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kobayashi,Daisuke <kobayashi.da-06@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20241002011549.408412-2-kobayashi.da-06@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
SNP guests allocate shared buffers to perform I/O. It is done by
allocating pages normally from the buddy allocator and converting them
to shared with set_memory_decrypted().
The second, kexec-ed, kernel has no idea what memory is converted this
way. It only sees E820_TYPE_RAM.
Accessing shared memory via private mapping will cause unrecoverable RMP
page-faults.
On kexec, walk direct mapping and convert all shared memory back to
private. It makes all RAM private again and second kernel may use it
normally. Additionally, for SNP guests, convert all bss decrypted
section pages back to private.
The conversion occurs in two steps: stopping new conversions and
unsharing all memory. In the case of normal kexec, the stopping of
conversions takes place while scheduling is still functioning. This
allows for waiting until any ongoing conversions are finished. The
second step is carried out when all CPUs except one are inactive and
interrupts are disabled. This prevents any conflicts with code that may
access shared memory.
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/05a8c15fb665dbb062b04a8cb3d592a63f235937.1722520012.git.ashish.kalra@amd.com
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240911124251.702590-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU
domain. This core can be used by non safety applications as a remote
processor. When used as a remote processor with virtio/rpmessage IPC,
two carveout reserved memory nodes are needed. The first region is used
as a DMA pool for the rproc device, and the second region will furnish
the static carveout regions for the firmware memory.
The current carveout addresses and sizes are defined statically for
each rproc device. The M4F processor does not have an MMU, and as such
requires the exact memory used by the firmware to be set-aside.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240911124251.702590-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Refactor __set_clr_pte_enc() and add two new helper functions to
set/clear PTE C-bit from early SEV/SNP initialization code and later
during shutdown/kexec especially when all CPUs are stopped and
interrupts are disabled and set_memory_xx() interfaces can't be used.
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/5df4aa450447f28294d1c5a890e27b63ed4ded36.1722520012.git.ashish.kalra@amd.com
The bus-width property was moved to k3-am64-main.dtsi.
See commit 0ae3113a46 ("arm64: dts: ti: k3-am6*: Fix bus-width property
in MMC nodes")
Signed-off-by: John Ma <jma@phytec.com>
Link: https://lore.kernel.org/r/20240926184918.3342719-2-jma@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The bus-width property was moved to k3-am64-main.dtsi.
See commit 0ae3113a46 ("arm64: dts: ti: k3-am6*: Fix bus-width property
in MMC nodes")
Signed-off-by: John Ma <jma@phytec.com>
Link: https://lore.kernel.org/r/20240926184918.3342719-1-jma@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add overlay to enable the PCIe0 instance of PCIe on AM642-EVM in
Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240930103413.3085689-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add overlay to enable the PCIE1 instance of PCIe on J7200-EVM in
Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241001093426.3401765-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This allows a uniform test numbering even though two passes are used
to execute them.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If the `perf test` process is killed the child tests continue running
and may run indefinitely. Propagate SIGINT (ctrl-C) and SIGTERM (kill)
signals to the running child processes so that they terminate when the
parent is killed.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now C tests can have the "exclusive" flag to run without other tests,
and shell tests can add "(exclusive)" to their description, run tests
in parallel by default. Tests which flake when run in parallel can be
marked exclusive to resolve the problem.
Non-scientifically, the reduction on `perf test` execution time is
from 8m35.890s to 3m55.115s on a Tigerlake laptop. So the tests
complete in less than half the time.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In pass 1 run all tests that succeed when run in parallel. In pass 2
sequentially run all remaining tests that are flagged as
"exclusive". Sequential and dont_fork tests keep to run in pass 1.
Read the exclusive flag from the shell test descriptions, but remove
from display to avoid >100 characters. Add error handling to finish
tests if starting a later test fails. Mark the task-exit test as
exclusive due to issues reported-by James Clark.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a signal handler around running a test. If a signal occurs during
the test a siglongjmp unwinds the stack and output is flushed. The
global run_test_jmp_buf is either unique per forked child or not
shared during sequential execution.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Some shell tests compete for resources and so can't run with other
tests, tag such tests. The "(exclusive)" stems from shared/exclusive
to describe how the tests run as if holding a lock.
For ARM/coresight tests:
Suggested-by: James Clark <james.clark@linaro.org>
Additional failing tests:
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Python's json.tool will output the input json to stdout. Redirect to
/dev/null to avoid blocking on stdout writes.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The variable duplicates sequential but is only used for command line
argument processing. Reduce scope to make the behavior clearer.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Before polling or sleeping to wait for a test to complete, print out
": Running (<num> active)" where the number of active tests is
determined by iterating over the tests and seeing which return false
for check_if_command_finished. The line erasing and printing out only
occur if the number of runnings tests changes to avoid the line
flickering excessively. Knowing tests are running allows a user to
know a test is running and in parallel mode how many of the tests are
waiting to complete. If color mode is disabled then avoid displaying
the "Running" message as deleting the line isn't reliable.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
