Adding bootph properties on leaf nodes imply that they are applicable to
the parent nodes as well. Bootloaders can derive the parent nodes when
bootph is available in the leaf nodes.
Remove the bootph-* properties from parent nodes as they are redundant.
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-7-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- hbmc_mux for enabling Hyperflash support
- ESM nodes for enabling ESM support.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-6-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- hbmc_mux for enabling Hyperflash support
- ESM nodes for enabling ESM support.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-5-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.
Following adds bootph-* to
- System controller nodes that allow controlling power domain, clocks, etc.
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- mcu_ringacc/mcu_udmap for DMA to SMS
- chipid for detection soc information.
- mcu_timer0 for bootloader tick-timer.
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-4-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The following nodes are being used in the bootloaders. Adds bootph-*
properties to the leaf nodes to enable bootloaders to utilise them.
Following adds bootph-* to
- secure_proxy_sa3/secure_proxy_main mboxes for communication with
System Controller
- wkup_vtm for enabling Adaptive voltage scaling(AVS) support
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-3-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Adding bootph properties on leaf nodes imply that they are applicable to
the parent nodes as well. Bootloaders can derive the parent nodes when
bootph is available in the leaf nodes.
Remove the bootph-* properties from parent nodes as they are redundant.
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-2-2af90e3a4fe7@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Stephen Rothwell reports multiple htmldocs indentation warnings when
merging sound tree for linux-next:
Documentation/sound/designs/compress-accel.rst:67: ERROR: Unexpected indentation.
Documentation/sound/designs/compress-accel.rst:67: WARNING: Blank line required after table.
Documentation/sound/designs/compress-accel.rst:68: WARNING: Line block ends without a blank line.
Documentation/sound/designs/compress-accel.rst:72: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/sound/designs/compress-accel.rst:73: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix these above by wrapping passthrough audio stream state machine
flowchart in a literal code block.
Fixes: 04177158cf ("ALSA: compress_offload: introduce accel operation mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20241028193242.11597640@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241028111647.17378-2-bagasdotme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Relocate the atomic_threshold field to scmi_desc and move the related code
to scmi_transport_setup.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-6-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Override the default built-in max_msg and max_msg_size transport properties
when the corresponding properties were found to be described in the
devicetree.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-5-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Depending on specific hardware and firmware design choices, it may be
possible for different platforms to end up having different requirements
regarding the same transport characteristics.
Introduce max-msg-size and max-msg properties to describe such platform
specific transport constraints, since they cannot be discovered otherwise.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI virtio transport maximum PDU size is currently hardcoded at build
time; this will not play well with the possibile retrieval of a different
size at run-time.
Make the virtio transport derive the maximum PDU size from the max_msg_size
provided by the SCMI core.
No functional change.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Transports using shared memory have to consider the overhead due to the
layout area when determining the area effectively available for messages.
Till now, such definitions were ambiguos across the SCMI stack and the
overhead layout area was not considered at all.
Add proper checks in the shmem layer to validate the provided max_msg_size
against the effectively available memory area, less the layout.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some shared memory areas might only support a certain access width,
such as 32-bit, which memcpy_{from,to}_io() does not adhere to at least
on ARM64 by making both 8-bit and 64-bit accesses to such memory.
Update the shmem layer to support reading from and writing to such
shared memory area using the specified I/O width in the Device Tree. The
various transport layers making use of the shmem.c code are updated
accordingly to pass the I/O accessors that they store.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240827182450.3608307-3-florian.fainelli@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some SRAMs need to be accessed with a specific access width, define
the 'reg-io-width' property specifying such access sizes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240827182450.3608307-2-florian.fainelli@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The original optional property was missing a vendor string prefix; this
has been rectified.
Fix the naming of such optional property in code too.
Cc: Peng Fan <peng.fan@nxp.com>
Fixes: 1780e411ef ("firmware: arm_scmi: Use max-rx-timeout-ms from devicetree")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-8-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recently introduced max-rx-timeout-ms optionao property is missing a
vendor prefix.
Add the vendor prefix so that it aligns with the new properties that
are about to get added soon.
Fixes: 3a5e6ab06e ("dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-7-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This file has been an orphan ever since commit b3b961448f
("V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper
devices into the PCI ID list"), having no references except
for the orphan removed by commit 519648bed4 ("media: mantis:
remove orphan mantis_core.c")
Fixes: b3b961448f ("V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the PCI ID list")
Link: https://patchwork.linuxtv.org/project/linux-media/patch/1277054487-14384-1-git-send-email-bjorn@mork.no/
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If the number of allocated buffers is less than q->min_queued_buffers,
then a debug message was logged saying that it needs at least that
many queued buffers. But the test is about allocated buffers.
Update the message to say "allocated buffers".
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
If V4L2_TYPE_IS_OUTPUT() the information has been initially provided by
the user, not by the driver.
Fixes: e23ccc0ad9 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a spelling mistake in a WARN message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
All functions that take the class address as argument expect a const
pointer so we can make the video class constant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846 ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
cx231xx_bcount and cx231xx_power_suspend() were added by the original
commit e0d3bafd02 ("V4L/DVB (10954): Add cx231xx USB driver")
but remained unused.
cx231xx_dump_HH_reg() was added by
commit 64fbf44455 ("[media] cx231xx: Added support for Carraera, Shelby,
RDx_253S and VIDEO_GRABBER")
but remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The driver configures mostly Pixel PLL from the clock cached in
local copy of the mode. Make sure the driver uses adjusted mode
which contains the updated Pixel PLL settings negotiated in
tc_dpi_atomic_check()/tc_edp_atomic_check().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026041057.247640-1-marex@denx.de
Use the predefined MCG_BANKCNT_MASK macro instead of the hardcoded
0xff to mask the bank number bits.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20241025024602.24318-3-qiuxu.zhuo@intel.com
'ports_fwnode' is initialized via device_get_named_child_node(), which
requires a call to fwnode_handle_put() when the variable is no longer
required to avoid leaking memory.
Add the missing fwnode_handle_put() after 'ports_fwnode' has been used
and is no longer required.
Fixes: 94a2a84f5e ("net: dsa: mv88e6xxx: Support LED control")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using xchg() to atomically get and clear the MCE log buffer flags,
streamlines the code and reduces the text size by 20 bytes.
$ size dev-mcelog.o.*
text data bss dec hex filename
3013 360 160 3533 dcd dev-mcelog.o.old
2993 360 160 3513 db9 dev-mcelog.o.new
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20241025024602.24318-2-qiuxu.zhuo@intel.com
Add drive strength configuration support for GPIO F and G groups.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/20241023104406.4083460-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The map pointer is freed by pinctrl_utils_free_map(). It must not be a
devm_ pointer or it leads to a double free when the device is unloaded.
This is similar to a couple bugs Harshit Mogalapalli fixed earlier in
commits 3fd976afe9 ("pinctrl: nuvoton: fix a double free in
ma35_pinctrl_dt_node_to_map_func()") and 4575962aee ("pinctrl: sophgo:
fix double free in cv1800_pctrl_dt_node_to_map()").
Fixes: a83c29e1d1 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/4b5f1306-dc01-4edc-96d3-b232b930ddf2@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
YAML binding file provides the conversion of the original text-based
binding for the pinctrl-mcp23s08 to microchip,mcp23s08.yaml.
following compatible strings using the deprecated mcp prefix have been
removed from this binding:
- mcp,mcp23s08
- mcp,mcp23s17
- mcp,mcp23008
- mcp,mcp23017
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20241028063939.6276-1-himanshu.bhavani@siliconsignals.io
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a new feature bit that indicates support for workload-based heuristic
feedback to OS for scheduling decisions.
When the bit set, threads are classified during runtime into enumerated
classes. The classes represent thread performance/power characteristics
that may benefit from special scheduling behaviors.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241028020251.8085-4-mario.limonciello@amd.com
generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem,
on huge=always tmpfs, issues a warning and then hangs (interruptibly):
WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9
CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2
...
copy_page_from_iter_atomic+0xa6/0x5ec
generic_perform_write+0xf6/0x1b4
shmem_file_write_iter+0x54/0x67
Fix copy_page_from_iter_atomic() by limiting it in that case
(include/linux/skbuff.h skb_frag_must_loop() does similar).
But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too
surprising, has outlived its usefulness, and should just be removed?
Fixes: 908a1ad894 ("iov_iter: Handle compound highmem pages in copy_page_from_iter_atomic()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/dd5f0c89-186e-18e1-4f43-19a60f5a9774@google.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
André Almeida <andrealmeid@igalia.com> says:
This patchset adds support for case-insensitive file names lookups in
tmpfs. The main difference from other casefold filesystems is that tmpfs
has no information on disk, just on RAM, so we can't use mkfs to create a
case-insensitive tmpfs. For this implementation, I opted to have a mount
option for casefolding. The rest of the patchset follows a similar approach
as ext4 and f2fs.
The use case for this feature is similar to the use case for ext4, to
better support compatibility layers (like Wine), particularly in
combination with sandboxing/container tools (like Flatpak). Those
containerization tools can share a subset of the host filesystem with an
application. In the container, the root directory and any parent
directories required for a shared directory are on tmpfs, with the
shared directories bind-mounted into the container's view of the
filesystem.
If the host filesystem is using case-insensitive directories, then the
application can do lookups inside those directories in a
case-insensitive way, without this needing to be implemented in
user-space. However, if the host is only sharing a subset of a
case-insensitive directory with the application, then the parent
directories of the mount point will be part of the container's root
tmpfs. When the application tries to do case-insensitive lookups of
those parent directories on a case-sensitive tmpfs, the lookup will
fail.
For example, if /srv/games is a case-insensitive directory on the host,
then applications will expect /srv/games/Steam/Half-Life and
/srv/games/steam/half-life to be interchangeable; but if the
container framework is only sharing /srv/games/Steam/Half-Life and
/srv/games/Steam/Portal (and not the rest of /srv/games) with the
container, with /srv, /srv/games and /srv/games/Steam as part of the
container's tmpfs root, then making /srv/games a case-insensitive
directory inside the container would be necessary to meet that
expectation.
I send a patch for xfstests to enable the casefold test (generic/556) for
tmpfs.[1] The test succeed.
You can test this patchset using:
sudo mount -t tmpfs -o casefold tmpfs mnt/
And making a dir case-insensitive:
mkdir mnt/dir
chattr +F mnt/dir
[1] https://lore.kernel.org/fstests/20240823173008.280917-1-andrealmeid@igalia.com/
* patches from https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-0-f443d5814194@igalia.com:
docs: tmpfs: Add casefold options
tmpfs: Expose filesystem features via sysfs
tmpfs: Add flag FS_CASEFOLD_FL support for tmpfs dirs
tmpfs: Add casefold lookup support
libfs: Export generic_ci_ dentry functions
unicode: Recreate utf8_parse_version()
unicode: Export latest available UTF-8 version number
ext4: Use generic_ci_validate_strict_name helper
libfs: Create the helper function generic_ci_validate_strict_name()
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-0-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Document mounting options for casefold support in tmpfs.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-9-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Expose filesystem features through sysfs, so userspace can query if
tmpfs support casefold.
This follows the same setup as defined by ext4 and f2fs to expose
casefold support to userspace.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-8-f443d5814194@igalia.com
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable setting flag FS_CASEFOLD_FL for tmpfs directories, when tmpfs is
mounted with casefold support. A special check is need for this flag,
since it can't be set for non-empty directories.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-7-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable casefold lookup in tmpfs, based on the encoding defined by
userspace. That means that instead of comparing byte per byte a file
name, it compares to a case-insensitive equivalent of the Unicode
string.
* Dcache handling
There's a special need when dealing with case-insensitive dentries.
First of all, we currently invalidated every negative casefold dentries.
That happens because currently VFS code has no proper support to deal
with that, giving that it could incorrectly reuse a previous filename
for a new file that has a casefold match. For instance, this could
happen:
$ mkdir DIR
$ rm -r DIR
$ mkdir dir
$ ls
DIR/
And would be perceived as inconsistency from userspace point of view,
because even that we match files in a case-insensitive manner, we still
honor whatever is the initial filename.
Along with that, tmpfs stores only the first equivalent name dentry used
in the dcache, preventing duplications of dentries in the dcache. The
d_compare() version for casefold files uses a normalized string, so the
filename under lookup will be compared to another normalized string for
the existing file, achieving a casefolded lookup.
* Enabling casefold via mount options
Most filesystems have their data stored in disk, so casefold option need
to be enabled when building a filesystem on a device (via mkfs).
However, as tmpfs is a RAM backed filesystem, there's no disk
information and thus no mkfs to store information about casefold.
For tmpfs, create casefold options for mounting. Userspace can then
enable casefold support for a mount point using:
$ mount -t tmpfs -o casefold=utf8-12.1.0 fs_name mount_dir/
Userspace must set what Unicode standard is aiming to. The available
options depends on what the kernel Unicode subsystem supports.
And for strict encoding:
$ mount -t tmpfs -o casefold=utf8-12.1.0,strict_encoding fs_name mount_dir/
Strict encoding means that tmpfs will refuse to create invalid UTF-8
sequences. When this option is not enabled, any invalid sequence will be
treated as an opaque byte sequence, ignoring the encoding thus not being
able to be looked up in a case-insensitive way.
* Check for casefold dirs on simple_lookup()
On simple_lookup(), do not create dentries for casefold directories.
Currently, VFS does not support case-insensitive negative dentries and
can create inconsistencies in the filesystem. Prevent such dentries to
being created in the first place.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-6-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Export generic_ci_ dentry functions so they can be used by
case-insensitive filesystems that need something more custom than the
default one set by `struct generic_ci_dentry_ops`.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-5-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
All filesystems that currently support UTF-8 casefold can fetch the
UTF-8 version from the filesystem metadata stored on disk. They can get
the data stored and directly match it to a integer, so they can skip the
string parsing step, which motivated the removal of this function in the
first place.
However, for tmpfs, the only way to tell the kernel which UTF-8 version
we are about to use is via mount options, using a string. Re-introduce
utf8_parse_version() to be used by tmpfs.
This version differs from the original by skipping the intermediate step
of copying the version string to an auxiliary string before calling
match_token(). This versions calls match_token() in the argument string.
The paramenters are simpler now as well.
utf8_parse_version() was created by 9d53690f0d ("unicode: implement
higher level API for string handling") and later removed by 49bd03cc7e
("unicode: pass a UNICODE_AGE() tripple to utf8_load").
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-4-f443d5814194@igalia.com
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Export latest available UTF-8 version number so filesystems can easily
load the newest one.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-3-f443d5814194@igalia.com
Acked-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use the helper function to check the requirements for casefold
directories using strict encoding.
Suggested-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-2-f443d5814194@igalia.com
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Create a helper function for filesystems do the checks required for
casefold directories and strict encoding.
Suggested-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-1-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
This patch adds support for the rt722 multi-function codec and the
rt1320 amplifier in the ARL board configuration.
Link 0: RT722 codec with three endpoints: Headset, Speaker, and DMIC.
Link 2: RT1320 amplifier.
Note:
The Speaker endpoint on the RT722 codec is not used.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a quirk to include the codec amplifier
function for this Dell SKU.
Note: In this SKU '0CF0', the RT722 codec amplifier is
excluded, and an external amplifier is used instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SKUs use the multi-function codec, which integrates
Headset, Amplifier and DMIC. The corresponding quirks provide
options to support internal amplifier/DMIC or not.
In the case of RT722, this SKU excludes the internal amplifier and
use an additional amplifier instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
