This reverts commit 7aed6a2c51.
Now that __no_sanitize_address attribute is fixed for KASAN_SW_TAGS with
GCC, allow re-enabling KASAN_SW_TAGS with GCC.
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrew Pinski <pinskia@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20241021120013.3209481-2-elver@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Devicetree binding has documented the node name for UFS controllers as
'ufshc'. So let's use it instead of 'ufs' which is for the UFS devices.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240514-ufs-nodename-fix-v1-2-4c55483ac401@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the i.MX9 DDR controller, which has different register
offsets and some function changes compared to the existing fsl_ddr
controller. The ECC and error injection functions are almost the same,
so update and reuse the driver for i.MX9. Add a special type 'TYPE_IMX9'
specifically for the i.MX9 controller to distinguish the differences.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-5-86ae6fc2756a@nxp.com
iMX9 memory controller is similar with other layerscape chips. But some
register layout has a little bit difference, so add new compatible string
'nxp,imx9-memory-controller' for it.
imx9 need two 'reg', one for DDR controller and the other is ECC inject
engine register space. Keep the same restriction for other compatible
string.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-4-86ae6fc2756a@nxp.com
Fix undefined behavior caused by left-shifting a negative value in the
expression:
cap_high ^ (1 << (bad_data_bit - 32))
The variable bad_data_bit ranges from 0 to 63. When it is less than 32,
bad_data_bit - 32 becomes negative, and left-shifting by a negative
value in C is undefined behavior.
Fix this by combining cap_high and cap_low into a 64-bit variable.
[ bp: Massage commit message, simplify error bits handling. ]
Fixes: ea2eb9a8b6 ("EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx")
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-3-86ae6fc2756a@nxp.com
The display node in mt8195.dtsi was triggering a CHECK_DTBS error due
to an excessively long 'clocks' property:
display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long
To resolve this issue, the constraints for 'clocks' and
other properties within the subschemas will be reinforced.
Fixes: 739058a9c5 ("dt-bindings: display: mediatek: split: add compatible for MT8195")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241007022834.4609-1-moudy.ho@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
As struct file_operations is really big, but (most) debugfs
files only use simple_open, read, write and perhaps seek, and
don't need anything else, this wastes a lot of space for NULL
pointers.
Add a struct debugfs_short_fops and some bookkeeping code in
debugfs so that users can use that with debugfs_create_file()
using _Generic to figure out which function to use.
Converting mac80211 to use it where possible saves quite a
bit of space:
1010127 205064 1220 1216411 128f9b net/mac80211/mac80211.ko (before)
981199 205064 1220 1187483 121e9b net/mac80211/mac80211.ko (after)
-------
-28928 = ~28KiB
With a marginal space cost in debugfs:
8701 550 16 9267 2433 fs/debugfs/inode.o (before)
25233 325 32 25590 63f6 fs/debugfs/file.o (before)
8914 558 16 9488 2510 fs/debugfs/inode.o (after)
25380 325 32 25737 6489 fs/debugfs/file.o (after)
---------------
+360 +8
(All on x86-64)
A simple spatch suggests there are more than 300 instances,
not even counting the ones hidden in macros like in mac80211,
that could be trivially converted, for additional savings of
about 240 bytes for each.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241022151838.26f9925fb959.Ia80b55e934bbfc45ce0df42a3233d34b35508046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The GCM algorithm implementation in the kernel assumes that
a 12-byte IV is passed, not the actual J_0 from the GCM spec.
Don't rename, that'd be messy, but also don't fill the bytes
beyond the IV that aren't used, since otherwise it looks as
though j_0[12] is used uninitialized.
Link: https://patch.msgid.link/20241021151414.798ceb7a5896.Ic57751edad228d56865ecf7433fef469e5e0a4aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the BW limitation check to a more general format when
parsing CSA. Also, the original BW check did not account for BW
less than 160 MHz.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20241009121812.2419-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a monitor interface has an assigned channel (only happens with the
NO_VIRTUAL_MONITOR feature), only pass packets received on that channel.
This is useful for monitoring on multiple channels at the same time using
multiple monitor interfaces.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/1bbe55107ba0f2e62ea90f305faeb7ba9247ef29.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is useful for multi-radio devices that are capable of monitoring on
multiple channels simultanenously. When this flag is set, each monitor
interface is passed to the driver individually and can have a configured
channel.
The vif mac address for non-active monitor interfaces is cleared, in order
to allow the driver to tell them apart from active ones.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With multi-radio devices, each radio typically gets a fixed set of antennas.
In order to be able to disable specific antennas for some radios, user space
needs to know which antenna mask bits are assigned to which radio.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/e0a26afa2c88eaa188ec96ec6d17ecac4e827641.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows users to prevent a vif from affecting radios other than the
configured ones. This can be useful in cases where e.g. an AP is running
on one radio, and triggering a scan on another radio should not disturb it.
Changing the allowed radios list for a vif is supported, but only while
it is down.
While it is possible to achieve the same by always explicitly specifying
a frequency list for scan requests and ensuring that the wrong channel/band
is never accidentally set on an unrelated interface, this change makes
multi-radio wiphy setups a lot easier to deal with for CLI users.
By itself, this patch only enforces the radio mask for scanning requests
and remain-on-channel. Follow-up changes build on this to limit configured
frequencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/eefcb218780f71a1549875d149f1196486762756.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We require a message, but the macros shouldn't require a
formatted message, a constant one can be fine. Change the
macros to support that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.96e8554cb7a2.I0e06d8fd49f86bd4e9e216fc2265c43d7e78a095@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a function for getting the error status and error
code for given error table.
Remove a static function of same purpose from mvm/d3.c
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.610a38614ce6.Iab5f795bc30ce5d08550cff1772fe051527bcb95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When resuming it can happen that the TX queue is flushed even though it
is entirely empty. This is completely fine and should not be causing an
error level log message.
Return early from reclaim in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.7c152d0820be.I3ae39a9a470f47bfe4405f2e5c30327e157eb55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking if extra LTF should be disabled, we don't need to check the
the HW revision.
sband_eht_cap will be NULL if eht_capa::has_eht is false,
and that will be the case for the HWs that don't support EHT.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.78b0adbb7b50.I630a64f06ca86baecde6a2a238733b7df3cf70e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags_mask field is becoming reserved, and a new bandwidth
request is being added for RX OMI purposes. Support the new API
version as preparation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.437c6573df3c.I03612cb6cf47b12038c1db11b95a554cdea714e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It can happen that more errors occur after a firmware assertion. In that
case, having another log message after the restart has completed makes
it easier to see which errors where still part of the restart flow.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.d205dd88fb9d.Ic43a1b399f59d2ab1018ff2f9e6e3a0324692660@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the prep_add_interface() callback, so that in case
EMLSR is active and an AP or a P2P interface is do to be added,
EMLSR would be blocked.
Add a delayed work, so that in case that the interface was not
eventually added, EMLSR would be unblocked after 5 seconds.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.3baf282d0a01.Ife0a929455cb13a95ab197ca765d8db777ff9d89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers might need to also do this calculation, no point in
them duplicating the code. Since it's so simple, just make
it an inline.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.af003cb4a088.I8b5d29504b726caae24af6013c65b3daebe842a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to deal with (temporary) bandwidth reductions to/from
the AP such as the upcoming RX OMI changes, modify the min_def
calculation to also not take the chanreq width into account in
client mode. This normally changes nothing as the AP bandwidth
will be the same as the channel request's width. In the RX OMI
changes, however, the code will reduce the bandwidth for only
the AP STA, since the OMI is only to that, and TDLS STAs are
unaffected. Using the min_def for this case simplifies RX OMI
a lot.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.95a39c4f6f45.I2e7517fb1a7221dc6f60b0c752e4882042b4265d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Andrei previously fixed an issue in the client where the NSS
for links other than the primary/assoc/deflink isn't set. The
same issue appears to exist on the AP side, because there's
only a call to rate_control_rate_init() for the deflink, and
not any other links.
Rework the code a bit to do rate_control_rate_init() for links,
even if it really doesn't work with software rate control yet,
it does other things as well.
Also add rate_control_rate_init_all_links() to actually do it
properly when moving to ASSOC state in cfg80211.
Change the explicit call to ieee80211_sta_init_nss() to instead
be rate_control_rate_init() now in the client code, but also
add a call to rate_control_rate_init() when a link is added in
AP mode and the STA is already associated.
This should fix the NSS initialization issue, and perhaps pave
the way for actual software rate scaling a bit, in case anyone
cares in the future, but that of course needs a lot more than
just the init call.
We still need to fix the rate control _update_ as well, and the
sta_rc_update() driver method especially, but that will be in a
different patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.c693274a908f.I0376da02e9f5a30eaa1b5d0d01371ff09506d453@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_find_80211h_pwr_constr and ieee80211_find_cisco_dtpc don't
need the pointer to struct ieee80211_sub_if_data *sdata. Remove it and
it'll be one step closer to handle the power constraints per-link.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.3ea505cd74e7.Id416127544afd80e4fe7b275b612aef511fc64ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers may need to track this. Make it available for them, and maintain
the value when beacons are received.
When link X receives a beacon, iterate the RNR elements and update all
the links with their respective data.
Track the link id that updated the data so that each link can know
whether the update came from its own beacon or from another link.
In case, the update came from the link's own beacon, always update the
updater link id.
The purpose is to let the low level driver know if a link is losing its
beacons. If link X is losing its beacons, it can still track the
bss_param_ch_cnt and know where the update came from.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.e2d8d1a722ad.I04b883daba2cd48e5730659eb62ca1614c899cbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In practice, userspace hasn't been able to set this for many
years, and mac80211 has already rejected it (which is now no
longer needed), so reject SMPS mode (other than "OFF" to be
a bit more compatible) in AP mode. Also remove the parameter
from the AP settings struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.fe1fc46484cf.I8676fb52b818a4bedeb9c25b901e1396277ffc0b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
