npinfo is not used in any of the ndo_netpoll_setup() methods.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241018052108.2610827-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In 'taprio_change()', 'admin' pointer may become dangling due to sched
switch / removal caused by 'advance_sched()', and critical section
protected by 'q->current_entry_lock' is too small to prevent from such
a scenario (which causes use-after-free detected by KASAN). Fix this
by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update
'admin' immediately before an attempt to schedule freeing.
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Reported-by: syzbot+b65e0af58423fc8a73aa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20241018051339.418890-1-dmantipov@yandex.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move global variables into the struct fsl_mc_pdata to handle systems
with multiple DDR controllers.
No functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-2-86ae6fc2756a@nxp.com
Recently, commit 4a0ec2aa07 ("ipv6: switch inet6_addr_hash()
to less predictable hash") and commit 4daf4dc275 ("ipv6: switch
inet6_acaddr_hash() to less predictable hash") hardened IPv6
address hash functions.
inet_addr_hash() is also highly predictable, and a malicious use
could abuse a specific bucket.
Let's follow the change on IPv4 by using jhash_1word().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241018014100.93776-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case of parallel submissions multiple GuC id will point to the
same exec queue and on GT reset such exec queues will get restarted
multiple times which is not desirable.
v2: don't use exec_queue_enabled() which could race,
do the same for xe_guc_submit_stop (Matt B)
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2295
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022103555.731557-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
'commit db95ea787b ("arm64: mm: Wire up TCR.DS bit to PTE shareability
fields")' dropped the last reference to symbol _PROT_SECT_DEFAULT, while
transitioning from PMD_SECT_S to PMD_MAYBE_SHARED for PROT_SECT_DEFAULT.
Hence let's just drop that symbol which is now unused.
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241021063713.750870-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently if we encounter an error between fork() and exec() of a child
process we log the error to stderr. This means that the errors don't get
annotated with the child information which makes diagnostics harder and
means that if we miss the exit signal from the child we can deadlock
waiting for output from the child. Improve robustness and output quality
by logging to stdout instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241023-arm64-fp-stress-exec-fail-v1-1-ee3c62932c15@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pass down fsl_mc_pdata in helper functions ddr_in32() and ddr_out32() to
prepare for adding iMX9 support. The iMX9 has a slightly different
register layout.
No functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-1-86ae6fc2756a@nxp.com
It appears that relatively popular hardware out there implements
the CNTPOFF_EL2 variant of FEAT_ECV, advertises it via ID_AA64MMFR0_EL1,
but cannot be bothered to set SCR_EL3.ECVEn to 1.
You would probably think that "this is fine, EL3 will take the
trap on access to CNTPOFF_EL2 and flip the ECVEn bit", as that's
what a semi-decent firmware implementation would do.
But no. None of that. This particular implementation takes the trap,
considers its purpose in life, decides that it has none, and *RESETS*
the system.
Yes, x1e001de, I'm talking about you.
In order to allow this machine to be promoted slightly above the
level of a glorified door-stop, add a new "id_aa64mmfr0.ecv" override.
allowing the kernel to pretend this option was never there.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241021181434.1052974-1-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The BIOS reserves RMP table memory via e820 reservations. This can still lead
to RMP page faults during kexec if the host tries to access memory within the
same 2MB region.
Commit
400fea4b96 ("x86/sev: Add callback to apply RMP table fixups for kexec"
adjusts the e820 reservations for the RMP table so that the entire 2MB range
at the start/end of the RMP table is marked reserved.
The e820 reservations are then passed to firmware via SNP_INIT where they get
marked HV-Fixed.
The RMP table fixups are done after the e820 ranges have been added to
memblock, allowing the fixup ranges to still be allocated and used by the
system.
The problem is that this memory range is now marked reserved in the e820
tables and during SNP initialization these reserved ranges are marked as
HV-Fixed. This means that the pages cannot be used by an SNP guest, only by
the hypervisor.
However, the memory management subsystem does not make this distinction and
can allocate one of those pages to an SNP guest. This will ultimately result
in RMPUPDATE failures associated with the guest, causing it to fail to start
or terminate when accessing the HV-Fixed page.
The issue is captured below with memblock=debug:
[ 0.000000] SEV-SNP: *** DEBUG: snp_probe_rmptable_info:352 - rmp_base=0x280d4800000, rmp_end=0x28357efffff
...
[ 0.000000] BIOS-provided physical RAM map:
...
[ 0.000000] BIOS-e820: [mem 0x00000280d4800000-0x0000028357efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000028357f00000-0x0000028357ffffff] usable
...
...
[ 0.183593] memblock add: [0x0000028357f00000-0x0000028357ffffff] e820__memblock_setup+0x74/0xb0
...
[ 0.203179] MEMBLOCK configuration:
[ 0.207057] memory size = 0x0000027d0d194000 reserved size = 0x0000000009ed2c00
[ 0.215299] memory.cnt = 0xb
...
[ 0.311192] memory[0x9] [0x0000028357f00000-0x0000028357ffffff], 0x0000000000100000 bytes flags: 0x0
...
...
[ 0.419110] SEV-SNP: Reserving start/end of RMP table on a 2MB boundary [0x0000028357e00000]
[ 0.428514] e820: update [mem 0x28357e00000-0x28357ffffff] usable ==> reserved
[ 0.428517] e820: update [mem 0x28357e00000-0x28357ffffff] usable ==> reserved
[ 0.428520] e820: update [mem 0x28357e00000-0x28357ffffff] usable ==> reserved
...
...
[ 5.604051] MEMBLOCK configuration:
[ 5.607922] memory size = 0x0000027d0d194000 reserved size = 0x0000000011faae02
[ 5.616163] memory.cnt = 0xe
...
[ 5.754525] memory[0xc] [0x0000028357f00000-0x0000028357ffffff], 0x0000000000100000 bytes on node 0 flags: 0x0
...
...
[ 10.080295] Early memory node ranges[ 10.168065]
...
node 0: [mem 0x0000028357f00000-0x0000028357ffffff]
...
...
[ 8149.348948] SEV-SNP: RMPUPDATE failed for PFN 28357f7c, pg_level: 1, ret: 2
As shown above, the memblock allocations show 1MB after the end of the RMP as
available for allocation, which is what the RMP table fixups have reserved.
This memory range subsequently gets allocated as SNP guest memory, resulting
in an RMPUPDATE failure.
This can potentially be fixed by not reserving the memory range in the e820
table, but that causes kexec failures when using the KEXEC_FILE_LOAD syscall.
The solution is to use memblock_reserve() to mark the memory reserved for the
system, ensuring that it cannot be allocated to an SNP guest.
Since HV-Fixed memory is still readable/writable by the host, this only ends
up being a problem if the memory in this range requires a page state change,
which generally will only happen when allocating memory in this range to be
used for running SNP guests, which is now possible with the SNP hypervisor
support in kernel 6.11.
Backporter note:
Fixes tag points to a 6.9 change but as the last paragraph above explains,
this whole thing can happen after 6.11 received SNP HV support, therefore
backporting to 6.9 is not really necessary.
[ bp: Massage commit message. ]
Fixes: 400fea4b96 ("x86/sev: Add callback to apply RMP table fixups for kexec")
Suggested-by: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # 6.11, see Backporter note above.
Link: https://lore.kernel.org/r/20240815221630.131133-1-Ashish.Kalra@amd.com
kernel test robot reported a section mismatch in ip6_mr_cleanup().
WARNING: modpost: vmlinux: section mismatch in reference: ip6_mr_cleanup+0x0 (section: .text) -> 0xffffffff (section: .init.rodata)
WARNING: modpost: vmlinux: section mismatch in reference: ip6_mr_cleanup+0x14 (section: .text) -> ip6mr_rtnl_msg_handlers (section: .init.rodata)
ip6_mr_cleanup() uses ip6mr_rtnl_msg_handlers[] that has
__initconst_or_module qualifier.
ip6_mr_cleanup() is only called from inet6_init() but does
not have __init qualifier.
Let's add __init to ip6_mr_cleanup().
Fixes: 3ac84e31b3 ("ipmr: Use rtnl_register_many().")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410180139.B3HeemsC-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241017174732.39487-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PTRACE_GETREGSET API has now existed since Linux 2.6.33. The XSAVE
CPU feature should also be sufficiently common to be able to rely on it.
With this, define our internal FP state to be the hosts XSAVE data. Add
discovery for the hosts XSAVE size and place the FP registers at the end
of task_struct so that we can adjust the size at runtime.
Next we can implement the regset API on top and update the signal
handling as well as ptrace APIs to use them. Also switch coredump
creation to use the regset API and finally set HAVE_ARCH_TRACEHOOK.
This considerably improves the signal frames. Previously they might not
have contained all the registers (i386) and also did not have the
sizes and magic values set to the correct values to permit userspace to
decode the frame.
As a side effect, this will permit UML to run on hosts with newer CPU
extensions (such as AMX) that need even more register state.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241023094120.4083426-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After fixing the HAVE_STACKPROTECTER checks for clang's in-progress
per-task stack protector support [1], the build fails during prepare0
because '-mstack-protector-guard-offset' has not been added to
KBUILD_CFLAGS yet but the other '-mstack-protector-guard' flags have.
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
make[4]: *** [scripts/Makefile.build:229: scripts/mod/empty.o] Error 1
make[4]: *** [scripts/Makefile.build:102: scripts/mod/devicetable-offsets.s] Error 1
Mirror other architectures and add all '-mstack-protector-guard' flags
to KBUILD_CFLAGS atomically during stack_protector_prepare, which
resolves the issue and allows clang's implementation to fully work with
the kernel.
Cc: stable@vger.kernel.org # 6.1+
Link: https://github.com/llvm/llvm-project/pull/110928 [1]
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009-powerpc-fix-stackprotector-test-clang-v2-2-12fb86b31857@kernel.org
Clang's in-progress per-task stack protector support [1] does not work
with the current Kconfig checks because '-mstack-protector-guard-offset'
is not provided, unlike all other architecture Kconfig checks.
$ fd Kconfig -x rg -l mstack-protector-guard-offset
./arch/arm/Kconfig
./arch/riscv/Kconfig
./arch/arm64/Kconfig
This produces an error from clang, which is interpreted as the flags not
being supported at all when they really are.
$ clang --target=powerpc64-linux-gnu \
-mstack-protector-guard=tls \
-mstack-protector-guard-reg=r13 \
-c -o /dev/null -x c /dev/null
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
This argument will always be provided by the build system, so mirror
other architectures and use '-mstack-protector-guard-offset=0' for
testing support, which fixes the issue for clang and does not regress
support with GCC.
Even with the first problem addressed, the 32-bit test continues to fail
because Kbuild uses the powerpc64le-linux-gnu target for clang and
nothing flips the target to 32-bit, resulting in an error about an
invalid register valid:
$ clang --target=powerpc64le-linux-gnu \
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2 \
-mstack-protector-guard-offset=0 \
-x c -c -o /dev/null /dev/null
clang: error: invalid value 'r2' in 'mstack-protector-guard-reg=', expected one of: r13
While GCC allows arbitrary registers, the implementation of
'-mstack-protector-guard=tls' in LLVM shares the same code path as the
user space thread local storage implementation, which uses a fixed
register (2 for 32-bit and 13 for 62-bit), so the command line parsing
enforces this limitation.
Use the Kconfig macro '$(m32-flag)', which expands to '-m32' when
supported, in the stack protector support cc-option call to properly
switch the target to a 32-bit one, which matches what happens in Kbuild.
While the 64-bit macro does not strictly need it, add the equivalent
64-bit option for symmetry.
Cc: stable@vger.kernel.org # 6.1+
Link: https://github.com/llvm/llvm-project/pull/110928 [1]
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009-powerpc-fix-stackprotector-test-clang-v2-1-12fb86b31857@kernel.org
When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.
Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.
Serialize the access to mux related setting with a mutex lock.
cpu0 (process A) cpu1(process B)
pinctrl_select_state() { pinctrl_select_state() {
pin_request() { pin_request() {
...
....
} else {
desc->mux_usecount++;
desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
if (desc->mux_usecount > 1)
return 0;
desc->mux_owner = owner;
} }
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/20241014192930.1539673-1-quic_mojha@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Three thermal governors call __thermal_cdev_update() under the
cdev lock without doing any checks, so in order to reduce the
related code duplication, introduce a new helper function called
thermal_cdev_update_nocheck() for them and make them use it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1835097.VLH7GnMWUR@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
It is not necessary to walk the thermal_instances list in a trip
descriptor under a cooling device lock, so acquire that lock only
for deleting the given thermal instance from the list of thermal
instances in the given cdev.
Moreover, in analogy with the previous change that introduced
thermal_instance_add(), put the code deleting the given thermal
instance from the lists it is on into a separate new function
called thermal_instance_delete().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3275745.5fSG56mABF@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
To reduce the number of redundant result checks in
thermal_bind_cdev_to_trip() and make the code in it easier to
follow, move some of it to a new function called thermal_instance_add()
and make thermal_bind_cdev_to_trip() invoke that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3618899.iIbC2pHGDl@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Holding a cooling device lock under thermal_governor_update_tz() is not
necessary and it may cause lockdep to complain if any governor's
.update_tz() callback attempts to lock a cdev.
For this reason, move the thermal_governor_update_tz() calls in
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip() from
under the cdev lock.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/7749552.EvYhyI6sBW@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Switch over the thermal core to using a mutex guard for
thermal_list_lock management.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2010397.PYKUYFuaPT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
To prepare for a subsequent change that will switch over the thermal
core to using a mutex guard for thermal_list_lock management, move the
code running under thermal_list_lock during the initialization and
unregistration of cooling devices into separate functions.
While at it, drop some comments that do not add value.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10572828.nUPlyArG6x@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Add a guard for unlocking a locked thermal zone temporarily and use it
in thermal_zone_pm_prepare().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3344086.aeNJFYEL58@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Add and use a guard for thermal zone locking.
This allows quite a few error code paths to be simplified among
other things and brings in a noticeable code size reduction for
a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1930069.tdWV9SEqCh@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
The IOMUXC controller description is almost identical on i.MX35/5x/6 SoCs,
except for the configuration bits which differ across SoCs. Rename the
fsl,imx6ul-pinctrl.yaml to fsl,imx35-pinctrl.yaml, fill in compatible
strings for the other SoCs and fill in the various bits into desciption.
This way, i.MX35/5x/6 series SoCs can all be converted to DT schema.
Remove the old text DT bindings description.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/20241017211241.170861-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), OF
can be enabled on all architectures. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
As ARM_SCMI_PROTOCOL already depends on COMPILE_TEST, we also don't
need to add COMPILE_TEST as an alternative dependency for it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/20241022134017.172411db@endymion.delvare
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This isn't used outside act_api.c, but is called by tcf_dump_walker()
prior to its definition. So move it upwards and make it static.
Simultaneously, reorder the variable declarations so that they follow
the networking "reverse Christmas tree" coding style.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241017161934.3599046-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcf_action_init() has logic for checking mismatches between action and
filter offload flags (skip_sw/skip_hw). AFAIU, this is intended to run
on the transition between the new tc_act_bind(flags) returning true (aka
now gets bound to classifier) and tc_act_bind(act->tcfa_flags) returning
false (aka action was not bound to classifier before). Otherwise, the
check is skipped.
For the case where an action is not standalone, but rather it was
created by a classifier and is bound to it, tcf_action_init() skips the
check entirely, and this means it allows mismatched flags to occur.
Taking the matchall classifier code path as an example (with mirred as
an action), the reason is the following:
1 | mall_change()
2 | -> mall_replace_hw_filter()
3 | -> tcf_exts_validate_ex()
4 | -> flags |= TCA_ACT_FLAGS_BIND;
5 | -> tcf_action_init()
6 | -> tcf_action_init_1()
7 | -> a_o->init()
8 | -> tcf_mirred_init()
9 | -> tcf_idr_create_from_flags()
10 | -> tcf_idr_create()
11 | -> p->tcfa_flags = flags;
12 | -> tc_act_bind(flags))
13 | -> tc_act_bind(act->tcfa_flags)
When invoked from tcf_exts_validate_ex() like matchall does (but other
classifiers validate their extensions as well), tcf_action_init() runs
in a call path where "flags" always contains TCA_ACT_FLAGS_BIND (set by
line 4). So line 12 is always true, and line 13 is always true as well.
No transition ever takes place, and the check is skipped.
The code was added in this form in commit c86e0209dc ("flow_offload:
validate flags of filter and actions"), but I'm attributing the blame
even earlier in that series, to when TCA_ACT_FLAGS_SKIP_HW and
TCA_ACT_FLAGS_SKIP_SW were added to the UAPI.
Following the development process of this change, the check did not
always exist in this form. A change took place between v3 [1] and v4 [2],
AFAIU due to review feedback that it doesn't make sense for action flags
to be different than classifier flags. I think I agree with that
feedback, but it was translated into code that omits enforcing this for
"classic" actions created at the same time with the filters themselves.
There are 3 more important cases to discuss. First there is this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1
which should be allowed, because prior to the concept of dedicated
action flags, it used to work and it used to mean the action inherited
the skip_sw/skip_hw flags from the classifier. It's not a mismatch.
Then we have this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_hw
where there is a mismatch and it should be rejected.
Finally, we have:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_sw
where the offload flags coincide, and this should be treated the same as
the first command based on inheritance, and accepted.
[1]: https://lore.kernel.org/netdev/20211028110646.13791-9-simon.horman@corigine.com/
[2]: https://lore.kernel.org/netdev/20211118130805.23897-10-simon.horman@corigine.com/
Fixes: 7adc576512 ("flow_offload: add skip_hw and skip_sw to control if offload the action")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241017161049.3570037-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add some documentation on Arm CCA and the requirements for running Linux
as a Realm guest. Also update booting.rst to describe the requirement
for RIPAS RAM.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-12-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Introduce an arm-cca-guest driver that registers with
the configfs-tsm module to provide user interfaces for
retrieving an attestation token.
When a new report is requested the arm-cca-guest driver
invokes the appropriate RSI interfaces to query an
attestation token.
The steps to retrieve an attestation token are as follows:
1. Mount the configfs filesystem if not already mounted
mount -t configfs none /sys/kernel/config
2. Generate an attestation token
report=/sys/kernel/config/tsm/report/report0
mkdir $report
dd if=/dev/urandom bs=64 count=1 > $report/inblob
hexdump -C $report/outblob
rmdir $report
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20241017131434.40935-11-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use the memory encryption APIs to trigger a RSI call to request a
transition between protected memory and shared memory (or vice versa)
and updating the kernel's linear map of modified pages to flip the top
bit of the IPA. This requires that block mappings are not used in the
direct map for realm guests.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-10-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When __change_memory_common() is purely setting the valid bit on a PTE
(e.g. via the set_memory_valid() call) there is no need for a TLBI as
either the entry isn't changing (the valid bit was already set) or the
entry was invalid and so should not have been cached in the TLB.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-9-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Within a realm guest it's not possible for a device emulated by the VMM
to access arbitrary guest memory. So force the use of bounce buffers to
ensure that the memory the emulated devices are accessing is in memory
which is explicitly shared with the host.
This adds a call to swiotlb_update_mem_attributes() which calls
set_memory_decrypted() to ensure the bounce buffer memory is shared with
the host. For non-realm guests or hosts this is a no-op.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-8-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Device mappings need to be emulated by the VMM so must be mapped shared
with the host.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-7-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of marking every MMIO as shared, check if the given region is
"Protected" and apply the permissions accordingly.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-6-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On Arm CCA, with RMM-v1.0, all MMIO regions are shared. However, in
the future, an Arm CCA-v1.0 compliant guest may be run in a lesser
privileged partition in the Realm World (with Arm CCA-v1.1 Planes
feature). In this case, some of the MMIO regions may be emulated
by a higher privileged component in the Realm world, i.e, protected.
Thus the guest must decide today, whether a given MMIO region is shared
vs Protected and create the stage1 mapping accordingly. On Arm CCA, this
detection is based on the "IPA State" (RIPAS == RIPAS_IO). Provide a
helper to run this check on a given range of MMIO.
Also, provide a arm64 helper which may be hooked in by other solutions.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-5-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The top bit of the configured IPA size is used as an attribute to
control whether the address is protected or shared. Query the
configuration from the RMM to assertain which bit this is.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-4-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Detect that the VM is a realm guest by the presence of the RSI
interface. This is done after PSCI has been initialised so that we can
check the SMCCC conduit before making any RSI calls.
If in a realm then iterate over all memory ensuring that it is marked as
RIPAS RAM. The loader is required to do this for us, however if some
memory is missed this will cause the guest to receive a hard to debug
external abort at some random point in the future. So for a
belt-and-braces approach set all memory to RIPAS RAM. Any failure here
implies that the RAM regions passed to Linux are incorrect so panic()
promptly to make the situation clear.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-3-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The RMM (Realm Management Monitor) provides functionality that can be
accessed by a realm guest through SMC (Realm Services Interface) calls.
The SMC definitions are based on DEN0137[1] version 1.0-rel0.
[1] https://developer.arm.com/documentation/den0137/1-0rel0/
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-2-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Antoine Tenart says:
====================
net: sysctl: allow dump_cpumask to handle higher numbers of CPUs
The main goal of this series is to allow dump_cpumask to handle higher
numbers of CPUs (patch 3). While doing so I had the opportunity to make
the function a bit simpler, which is done in patches 1-2.
None of those is net material IMO.
====================
Link: https://patch.msgid.link/20241017152422.487406-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This fixes the output of rps_default_mask and flow_limit_cpu_bitmap when
the CPU count is > 448, as it was truncated.
The underlying values are actually stored correctly when writing to
these sysctl but displaying them uses a fixed length temporary buffer in
dump_cpumask. This buffer can be too small if the CPU count is > 448.
Fix this by dynamically allocating the buffer in dump_cpumask, using a
guesstimate of what we need.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When computing the length we'll be able to use out of the buffers, one
char is removed from the temporary one to make room for a newline. It
should be removed from the output buffer length too, but in reality this
is not needed as the later call to scnprintf makes sure a null char is
written at the end of the buffer which we override with the newline.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before adding a new line at the end of the temporary buffer in
dump_cpumask, a length check is performed to ensure there is space for
it.
len = min(sizeof(kbuf) - 1, *lenp);
len = scnprintf(kbuf, len, ...);
if (len < *lenp)
kbuf[len++] = '\n';
Note that the check is currently logically wrong, the written length is
compared against the output buffer, not the temporary one. However this
has no consequence as this is always true, even if fixed: scnprintf
includes a null char at the end of the buffer but the returned length do
not include it and there is always space for overriding it with a
newline.
Remove the condition.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it.
Link: https://lore.kernel.org/all/20241007144724.920954-1-leo.yan@arm.com/
Fixes: dec65d79fd ("tracing/probe: Check event name length correctly")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When creating a trace_probe we would set nr_args prior to truncating the
arguments to MAX_TRACE_ARGS. However, we would only initialize arguments
up to the limit.
This caused invalid memory access when attempting to set up probes with
more than 128 fetchargs.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:__set_print_fmt+0x134/0x330
Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return
an error when there are too many arguments instead of silently
truncating.
Link: https://lore.kernel.org/all/20240930202656.292869-1-mikel@mikelr.com/
Fixes: 035ba76014 ("tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
sock_{,re}set_flag() are contained in sock_valbool_flag(),
it would be cleaner to just use sock_valbool_flag().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://patch.msgid.link/20241017133435.2552-1-yajun.deng@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This driver uses various OF-specific functions and depends on phandle
parsing. There's no reason to make it available to non-OF systems so add
a relevant dependency switch to its Kconfig entry.
Fixes: 2f1630f437 ("power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets")
Link: https://lore.kernel.org/r/20241004130449.51725-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add hash_supports_debug_pagealloc() helper to detect whether
debug_pagealloc can be supported on hash or not. This checks for both,
whether debug_pagealloc config is enabled and the linear map should
fit within rma_size/4 region size.
This can then be used early during htab_init_page_sizes() to decide
linear map pagesize if hash supports either debug_pagealloc or
kfence.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/c33c6691b2a2cf619cc74ac100118ca4dbf21a48.1729271995.git.ritesh.list@gmail.com
Enable kfence on book3s64 hash only when early init is enabled.
This is because, kfence could cause the kernel linear map to be mapped
at PAGE_SIZE level instead of 16M (which I guess we don't want).
Also currently there is no way to -
1. Make multiple page size entries for the SLB used for kernel linear
map.
2. No easy way of getting the hash slot details after the page table
mapping for kernel linear setup. So even if kfence allocate the
pool in late init, we won't be able to get the hash slot details in
kfence linear map.
Thus this patch disables kfence on hash if kfence early init is not
enabled.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/4a6eea8cfd1cd28fccfae067026bff30cbec1d4b.1729271995.git.ritesh.list@gmail.com
