Document compatible string for the WILC3000 chip. The chip is similar
to WILC1000, except that the register layout is slightly different and
it does not support WPA3/SAE.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241004114551.40236-1-marex@denx.de
The WILC3000 can suspend and enter low power state. According to local
measurements, the WILC3000 consumes the same amount of power if the slot
is powered up and WILC3000 is suspended, and if the WILC3000 is powered
off. Use the former option, keep the WILC3000 powered up as that allows
for things like WoWlan to work.
Note that this is tested on WILC3000 only, not on WILC1000 .
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240926195113.2823392-1-marex@denx.de
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240920025917.1959932-1-yanzhen@vivo.com
cfg80211_rx_assoc_resp() and cfg80211_rx_mlme_mgmt() need to be called
with the wiphy locked, so lock it before calling these functions.
Fixes: 36995892c2 ("wifi: mwifiex: add host mlme for client mode")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240918-mwifiex-cleanup-1-v2-1-2d0597187d3c@pengutronix.de
Most of the fixes this time are for platform specific drivers, addressing
issues found through build testing on freescale, ep93xx, starfive,
and npcm platforms, as as well as the ffa firmware.
The fixes for the scmi firmware driver address compatibility problems
found on broadcom machines.
There are only two devicetree fixes, addressing incorrect in configuration
on broadcom and marvell machines.
The changes to the Documentation and MAINTAINERS files are for
clarification only.
-----BEGIN PGP SIGNATURE-----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=h897
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Most of the fixes this time are for platform specific drivers,
addressing issues found through build testing on freescale, ep93xx,
starfive, and npcm platforms, as as well as the ffa firmware.
The fixes for the scmi firmware driver address compatibility problems
found on broadcom machines.
There are only two devicetree fixes, addressing incorrect in
configuration on broadcom and marvell machines.
The changes to the Documentation and MAINTAINERS files are for
clarification only"
* tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: arm_ffa: Avoid string-fortify warning caused by memcpy()
firmware: arm_scmi: Queue in scmi layer for mailbox implementation
firmware: arm_ffa: Avoid string-fortify warning in export_uuid()
firmware: arm_scmi: Give SMC transport precedence over mailbox
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Documentation/process: maintainer-soc: clarify submitting patches
dmaengine: cirrus: check that output may be truncated
dmaengine: cirrus: ERR_CAST() ioremap error
MAINTAINERS: use the canonical soc mailing list address and mark it as L:
ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin
arm64: dts: marvell: cn9130-sr-som: fix cp0 mdio pin numbers
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
reset: npcm: convert comma to semicolon
A collection of small fixes, nothing really stands out.
- Usual HD-audio quirks / device-specific fixes
- Kconfig dependency fix for UM
- A series of minor fixes for SoundWire
- Updates of USB-audio LINE6 contact address
-----BEGIN PGP SIGNATURE-----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=YI8n
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, nothing really stands out:
- Usual HD-audio quirks / device-specific fixes
- Kconfig dependency fix for UM
- A series of minor fixes for SoundWire
- Updates of USB-audio LINE6 contact address"
* tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2
ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property read
ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property read
ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller()
ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controller
ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects
ALSA: scarlett2: Add error check after retrieving PEQ filter values
ALSA: hda/cs8409: Fix possible NULL dereference
sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML
ALSA: line6: update contact information
ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set()
ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024
Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ukTi
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.
CC: stable@vger.kernel.org
Fixes: 28ecaaa5af ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
In case if g2h worker doesn't get opportunity to within specified
timeout delay then flush the g2h worker explicitly.
v2:
- Describe change in the comment and add TODO (Matt B/John H)
- Add xe_gt_warn on fence done after G2H flush (John H)
v3:
- Updated the comment with root cause
- Clean up xe_gt_warn message (John H)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1620
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2902
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017111410.2553784-2-badal.nilawar@intel.com
fw_upload's poll_complete() is really intended for use with
asynchronous write() implementations - or at least those where the
write() loop may terminate without the kernel yet being aware of whether
or not the firmware upload has succeeded. For auto-update, write() is
only ever called once and will only return when uploading has completed,
be that by passing or failing. The core fw_upload code only calls
poll_complete() after the final call to write() has returned.
However, the poll_complete() implementation in the auto-update driver
was written to expect poll_complete() to be called from another context,
and it waits for a completion signalled from write(). Since
poll_complete() is actually called from the same context, after the
write() loop has terminated, wait_for_completion() never sees the
completion get signalled and always times out, causing programming to
always report a failing.
Since write() is full synchronous, and its return value will indicate
whether or not programming passed or failed, poll_complete() serves no
purpose and can be cut down to simply return FW_UPLOAD_ERR_NONE.
Cc: stable@vger.kernel.org
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Reported-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Tested-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Similarly to what was done to the memcpy() routines, make copy_page()
and clear_page() also use the Armv8.8 FEAT_MOPS instructions.
Note: For copy_page() this uses the CPY* instructions instead of CPYF*
as CPYF* doesn't allow src and dst to be equal. It's not clear if
copy_page() needs to allow equal src and dst but it has worked so far
with the current implementation and there is no documentation forbidding
it.
Note, the unoptimized version of copy_page() in assembler.h is left as
it is.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-6-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Make memcpy(), memmove() and memset() use the Armv8.8 FEAT_MOPS
instructions when implemented on the CPU.
The CPY*/SET* instructions copy or set a block of memory of arbitrary
size and alignment. They can be interrupted by the CPU and the copying
resumed later. Their performance is expected to be close to the best
generic copy/set sequence of loads/stores for a given CPU. Using them in
the kernel's copy/set routines therefore avoids the need to periodically
rewrite the routines to optimize for new microarchitectures. It could
also lead to a performance improvement for some CPUs and systems.
With this change the kernel will always use the instructions if they are
implemented on the CPU (and have not been disabled by the arm64.nomops
command line parameter). When not implemented the usual routines will be
used (patched via alternatives). Note, we need to patch B/NOP instead of
the whole sequence to avoid executing a partially patched sequence in
case the compiler generates a mem*() call inside the alternatives
patching code.
Note that MOPS instructions have relaxed behavior on Device memory, but
it is expected that these routines are not generally used on MMIO.
Note: For memcpy(), this uses the CPY* instructions instead of CPYF*, as
CPY* allows overlaps between the source and destination buffers, and
despite contradicting the C standard, compilers require that memcpy()
work on exactly overlapping source and destination:
https://gcc.gnu.org/onlinedocs/gcc/Standards.html#C-Languagehttps://reviews.llvm.org/D86993
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-5-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Document that hypervisors must set HCR_EL2.MCE2 and handle MOPS
exceptions when they migrate a vCPU to another type of CPU, as Linux may
not be able to handle the exception at all times.
As one example, when running under nested virtualization, KVM does not
handle MOPS exceptions from the nVHE/hVHE EL2 hyp as the hyp is never
migrated, so the host hypervisor needs to handle them. There may be
other situations (now or in the future) where the kernel can't handle an
unexpected MOPS exception, so require that the hypervisor handles them.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-4-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We will soon be using MOPS instructions in the kernel, so wire up the
exception handler to handle exceptions from EL1 caused by the copy/set
operation being stopped and resumed on a different type of CPU.
Add a helper for advancing the single step state machine, similarly to
what the EL0 exception handler does.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-3-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
FEAT_MOPS instructions require that all three instructions (prologue,
main and epilogue) appear consecutively in memory. Placing a
kprobe/uprobe on one of them doesn't work as only a single instruction
gets executed out-of-line or simulated. So don't allow placing a probe
on a MOPS instruction.
Fixes: b7564127ff ("arm64: mops: detect and enable FEAT_MOPS")
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Finish the translation of kbuild/kbuild.rst and move kbuild
from TODO to the main body.
Update to commit 2eb5d7f242 ("kbuild: doc: describe the -C
option precisely for external module builds")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241016131710.2619567-1-dzm91@hust.edu.cn
Not all virtual addresses have physical addresses, such as if they were
vmalloc'd. Just trace the virtual address instead of trying to trace a
physical address. This aligns with the API, and is good enough to
associate dma_alloc with dma_free.
Fixes: 038eb433dc ("dma-mapping: add tracing for dma-mapping API calls")
Reported-by: syzbot+b4bfacdec173efaa8567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/670ebde5.050a0220.d9b66.0154.GAE@google.com/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
fix a typo in dev-tools/kmsan.rst
[jc: this is not really a typo, but "iff" is clearly a confusing construct
for non-native speakers; changing it will prevent people from trying to
"fix" it repeatedly.]
Signed-off-by: Haoyang Liu <tttturtleruss@hust.edu.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241015140159.8082-1-tttturtleruss@hust.edu.cn
Correct references to swiotlb_tbl_map_single() and
swiotlb_tbl_unmap_single() in the documentation for swiotlb.
Fix two small typos that went unnoticed in commit c93f261dfc
("Documentation/core-api: add swiotlb documentation"):
swiotlb_tlb_map_single --> swiotlb_tbl_map_single
swiotbl_tlb_unmap_single --> swiotlb_tbl_unmap_single
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241014224026.1838525-1-ezulian@redhat.com
Add a regression test to assert that, when performing a spanning store
which consumes the entirety of the rightmost right leaf node does not
result in maple tree corruption when doing so.
This achieves this by building a test tree of 3 levels and establishing a
store which ultimately results in a spanned store of this nature.
Link: https://lkml.kernel.org/r/30cdc101a700d16e03ba2f9aa5d83f2efa894168.1728314403.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "maple_tree: correct tree corruption on spanning store", v3.
There has been a nasty yet subtle maple tree corruption bug that appears
to have been in existence since the inception of the algorithm.
This bug seems far more likely to happen since commit f8d112a4e6
("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point
at which reports started to be submitted concerning this bug.
We were made definitely aware of the bug thanks to the kind efforts of
Bert Karwatzki who helped enormously in my being able to track this down
and identify the cause of it.
The bug arises when an attempt is made to perform a spanning store across
two leaf nodes, where the right leaf node is the rightmost child of the
shared parent, AND the store completely consumes the right-mode node.
This results in mas_wr_spanning_store() mitakenly duplicating the new and
existing entries at the maximum pivot within the range, and thus maple
tree corruption.
The fix patch corrects this by detecting this scenario and disallowing the
mistaken duplicate copy.
The fix patch commit message goes into great detail as to how this occurs.
This series also includes a test which reliably reproduces the issue, and
asserts that the fix works correctly.
Bert has kindly tested the fix and confirmed it resolved his issues. Also
Mikhail Gavrilov kindly reported what appears to be precisely the same
bug, which this fix should also resolve.
This patch (of 2):
There has been a subtle bug present in the maple tree implementation from
its inception.
This arises from how stores are performed - when a store occurs, it will
overwrite overlapping ranges and adjust the tree as necessary to
accommodate this.
A range may always ultimately span two leaf nodes. In this instance we
walk the two leaf nodes, determine which elements are not overwritten to
the left and to the right of the start and end of the ranges respectively
and then rebalance the tree to contain these entries and the newly
inserted one.
This kind of store is dubbed a 'spanning store' and is implemented by
mas_wr_spanning_store().
In order to reach this stage, mas_store_gfp() invokes
mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to
walk the tree and update the object (mas) to traverse to the location
where the write should be performed, determining its store type.
When a spanning store is required, this function returns false stopping at
the parent node which contains the target range, and mas_wr_store_type()
marks the mas->store_type as wr_spanning_store to denote this fact.
When we go to perform the store in mas_wr_spanning_store(), we first
determine the elements AFTER the END of the range we wish to store (that
is, to the right of the entry to be inserted) - we do this by walking to
the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we
have just determined contains the range over which we intend to write.
We then turn our attention to the entries to the left of the entry we are
inserting, whose state is represented by l_mas, and copy these into a 'big
node', which is a special node which contains enough slots to contain two
leaf node's worth of data.
We then copy the entry we wish to store immediately after this - the copy
and the insertion of the new entry is performed by mas_store_b_node().
After this we copy the elements to the right of the end of the range which
we are inserting, if we have not exceeded the length of the node (i.e.
r_mas.offset <= r_mas.end).
Herein lies the bug - under very specific circumstances, this logic can
break and corrupt the maple tree.
Consider the following tree:
Height
0 Root Node
/ \
pivot = 0xffff / \ pivot = ULONG_MAX
/ \
1 A [-----] ...
/ \
pivot = 0x4fff / \ pivot = 0xffff
/ \
2 (LEAVES) B [-----] [-----] C
^--- Last pivot 0xffff.
Now imagine we wish to store an entry in the range [0x4000, 0xffff] (note
that all ranges expressed in maple tree code are inclusive):
1. mas_store_gfp() descends the tree, finds node A at <=0xffff, then
determines that this is a spanning store across nodes B and C. The mas
state is set such that the current node from which we traverse further
is node A.
2. In mas_wr_spanning_store() we try to find elements to the right of pivot
0xffff by searching for an index of 0x10000:
- mas_wr_walk_index() invokes mas_wr_walk_descend() and
mas_wr_node_walk() in turn.
- mas_wr_node_walk() loops over entries in node A until EITHER it
finds an entry whose pivot equals or exceeds 0x10000 OR it
reaches the final entry.
- Since no entry has a pivot equal to or exceeding 0x10000, pivot
0xffff is selected, leading to node C.
- mas_wr_walk_traverse() resets the mas state to traverse node C. We
loop around and invoke mas_wr_walk_descend() and mas_wr_node_walk()
in turn once again.
- Again, we reach the last entry in node C, which has a pivot of
0xffff.
3. We then copy the elements to the left of 0x4000 in node B to the big
node via mas_store_b_node(), and insert the new [0x4000, 0xffff] entry
too.
4. We determine whether we have any entries to copy from the right of the
end of the range via - and with r_mas set up at the entry at pivot
0xffff, r_mas.offset <= r_mas.end, and then we DUPLICATE the entry at
pivot 0xffff.
5. BUG! The maple tree is corrupted with a duplicate entry.
This requires a very specific set of circumstances - we must be spanning
the last element in a leaf node, which is the last element in the parent
node.
spanning store across two leaf nodes with a range that ends at that shared
pivot.
A potential solution to this problem would simply be to reset the walk
each time we traverse r_mas, however given the rarity of this situation it
seems that would be rather inefficient.
Instead, this patch detects if the right hand node is populated, i.e. has
anything we need to copy.
We do so by only copying elements from the right of the entry being
inserted when the maximum value present exceeds the last, rather than
basing this on offset position.
The patch also updates some comments and eliminates the unused bool return
value in mas_wr_walk_index().
The work performed in commit f8d112a4e6 ("mm/mmap: avoid zeroing vma
tree in mmap_region()") seems to have made the probability of this event
much more likely, which is the point at which reports started to be
submitted concerning this bug.
The motivation for this change arose from Bert Karwatzki's report of
encountering mm instability after the release of kernel v6.12-rc1 which,
after the use of CONFIG_DEBUG_VM_MAPLE_TREE and similar configuration
options, was identified as maple tree corruption.
After Bert very generously provided his time and ability to reproduce this
event consistently, I was able to finally identify that the issue
discussed in this commit message was occurring for him.
Link: https://lkml.kernel.org/r/cover.1728314402.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/48b349a2a0f7c76e18772712d0997a5e12ab0a3b.1728314403.git.lorenzo.stoakes@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20241001023402.3374-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/all/CABXGCsOPwuoNOqSMmAvWO2Fz4TEmPnjFj-b7iF+XFRu1h7-+Dg@mail.gmail.com/
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
output_function_rst() does not handle object-like macros. It presents
a trailing "()" while output_function_man() handles these macros
correctly.
Update output_function_rst() to handle object-like macros.
Don't show the "Parameters" heading if there are no parameters.
For output_function_man(), don't show the "ARGUMENTS" heading if there
are no parameters.
I have tested this quite a bit with my ad hoc test files for both ReST
and man format outputs. The generated output looks good.
Fixes: cbb4d3e651 ("scripts/kernel-doc: handle object-like macros")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Horia Geanta <horia.geanta@freescale.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241015181107.536894-1-rdunlap@infradead.org
Microchip ATA6561 is High-Speed CAN Transceiver with Standby Mode.
It is pin-compatible with TI TCAN1042 and has a compatible programming
model, therefore use ti,tcan1042 as fallback compatible.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ilya Orazov <ilordash02@gmail.com>
Link: https://lore.kernel.org/r/20240915141831.2809208-2-ilordash02@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
RST_PHY/RST_ROPLL/RST_LCPLL are used for debug only on rk3588,
and they are not exported on rk3576, no need to request it in
driver.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20240920093629.7410-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Ensure CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX depends on CONFIG_COMMON_CLK to
fix the following link errors when compile testing some random kernel
configurations:
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.o: in function `rk_hdptx_phy_clk_register':
drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1031:(.text+0x470): undefined reference to `__clk_get_name'
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1036:(.text+0x4ba): undefined reference to `devm_clk_hw_register'
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1040:(.text+0x4d2): undefined reference to `of_clk_hw_simple_get'
m68k-linux-ld: drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c:1040:(.text+0x4da): undefined reference to `devm_of_clk_add_hw_provider'
Fixes: c4b09c5620 ("phy: phy-rockchip-samsung-hdptx: Add clock provider support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409180305.53PXymZn-lkp@intel.com/
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240923-sam-hdptx-link-fix-v1-1-8d10d7456305@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The NXP PTN3222 is the single-port eUSB2 to USB2 redriver that performs
translation between eUSB2 and USB2 signalling schemes. It supports all
three data rates: Low Speed, Full Speed and High Speed.
The reset state enables autonegotiation of the PHY role and of the data
rate, so no additional programming is required.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240830-nxp-ptn3222-v2-2-4c6d8535cf6c@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The NXP PTN3222 is the single-port eUSB2 to USB2 redriver that performs
translation between eUSB2 and USB2 signalling schemes. It supports all
three data rates: Low Speed, Full Speed and High Speed.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240830-nxp-ptn3222-v2-1-4c6d8535cf6c@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via 20a759df3b ("riscv, bpf: make
some atomic operations fully ordered").
Fixes: dd642ccb45 ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lpc.events/event/18/contributions/1949/attachments/1665/3441/bpfmemmodel.2024.09.19p.pdf [1]
Link: https://lore.kernel.org/bpf/20241017143628.2673894-1-parri.andrea@gmail.com
Convert the binding to yaml and rename it according to its first
compatible instead of the unspecific rockchip-inno-hdmi naming.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241007162732.2450168-1-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert bcm2835-aux-spi binding to Dt schema
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/ZxEm-H-PjlQyXeOH@Emma
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/phy/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Include the MediaTek TPHY in a power domain. Add the 'power-domains'
property in the Device Tree (DT) Schema and set 'maxItems: 1'.
Also, include a reminder in the description of the 'power-domains'
property.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241012035016.17667-1-macpaul.lin@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit b64a85fb8f ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in
wiz driver") added support for USXGMII mode. In doing so, P0_REFCLK_SEL
was set to "pcs_mac_clk_divx1_ln_0" (0x3) and P0_STANDARD_MODE was set to
LANE_MODE_GEN1, which results in a data rate of 5.15625 Gbps. However,
since the USXGMII mode can support up to 10.3125 Gbps data rate, the
aforementioned fields should be set to "pcs_mac_clk_divx0_ln_0" (0x2) and
LANE_MODE_GEN2 respectively. The signal corresponding to the USXGMII lane
of the SERDES has been measured as 5 Gbps without the change and 10 Gbps
with the change. Hence, fix the configuration accordingly to support
USXGMII up to 10G.
Fixes: b64a85fb8f ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241012053937.3596885-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In order to connect the USB 2.0 PHY to its controller, we also need to
set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot
versions did that, but upstream firmware does not, and the kernel must
not rely on such behavior anyway. Failing to set this left the USB
gadget port invisible to connected hosts behind.
Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1]
Fixes: 16d3a71c20 ("phy: starfive: Add JH7110 USB 2.0 PHY driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In order to support different HW versions, introduce aux_cfg array
to move v4 specific aux configuration settings.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
Link: https://lore.kernel.org/r/20241004103046.22209-3-quic_mukhopad@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCIe PHYs on x1e80100 do not a have a qref supply so stop requesting
one. This also avoids the follow warning at boot:
qcom-qmp-pcie-phy 1bfc000.phy: supply vdda-qref not found, using dummy regulator
Fixes: 9dab00ee95 ("phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100")
Fixes: 606060ce8f ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241015121406.15033-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds RK3576 device match data support.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241014020342.15974-2-frawang.cn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible for the USBDP phy in the Rockchip RK3576 SoC.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20241014020342.15974-1-frawang.cn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the sqpoll is exiting and cancels pending work items, it may need
to run task_work. If this happens from within io_uring_cancel_generic(),
then it may be under waiting for the io_uring_task waitqueue. This
results in the below splat from the scheduler, as the ring mutex may be
attempted grabbed while in a TASK_INTERRUPTIBLE state.
Ensure that the task state is set appropriately for that, just like what
is done for the other cases in io_run_task_work().
do not call blocking ops when !TASK_RUNNING; state=1 set at [<0000000029387fd2>] prepare_to_wait+0x88/0x2fc
WARNING: CPU: 6 PID: 59939 at kernel/sched/core.c:8561 __might_sleep+0xf4/0x140
Modules linked in:
CPU: 6 UID: 0 PID: 59939 Comm: iou-sqp-59938 Not tainted 6.12.0-rc3-00113-g8d020023b155 #7456
Hardware name: linux,dummy-virt (DT)
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __might_sleep+0xf4/0x140
lr : __might_sleep+0xf4/0x140
sp : ffff80008c5e7830
x29: ffff80008c5e7830 x28: ffff0000d93088c0 x27: ffff60001c2d7230
x26: dfff800000000000 x25: ffff0000e16b9180 x24: ffff80008c5e7a50
x23: 1ffff000118bcf4a x22: ffff0000e16b9180 x21: ffff0000e16b9180
x20: 000000000000011b x19: ffff80008310fac0 x18: 1ffff000118bcd90
x17: 30303c5b20746120 x16: 74657320313d6574 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: ffff600036c64f0b
x11: 1fffe00036c64f0a x10: ffff600036c64f0a x9 : dfff800000000000
x8 : 00009fffc939b0f6 x7 : ffff0001b6327853 x6 : 0000000000000001
x5 : ffff0001b6327850 x4 : ffff600036c64f0b x3 : ffff8000803c35bc
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000e16b9180
Call trace:
__might_sleep+0xf4/0x140
mutex_lock+0x84/0x124
io_handle_tw_list+0xf4/0x260
tctx_task_work_run+0x94/0x340
io_run_task_work+0x1ec/0x3c0
io_uring_cancel_generic+0x364/0x524
io_sq_thread+0x820/0x124c
ret_from_fork+0x10/0x20
Cc: stable@vger.kernel.org
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
