Commit 44aff8e310 ("phy: qcom-qmp-combo: clean up probe
initialisation") removed most users of the platform device driver data,
but mistakenly also removed the initialisation despite the data still
being used in the runtime PM callbacks.
The initialisation was soon after restored by commit 83a0bbe39b ("phy:
qcom-qmp-combo: add support for updated sc8280xp binding") but now
happens slightly later during probe. This should not cause any trouble
currently as runtime PM needs to be enabled manually through sysfs and
the platform device would not be suspended before the PHY has been
registered anyway.
Move the driver data initialisation to avoid a NULL-pointer dereference
on runtime suspend if runtime PM is ever enabled by default in this
driver.
Fixes: 44aff8e310 ("phy: qcom-qmp-combo: clean up probe initialisation")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 413db06c05 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data from the
qcom-qmp-usb driver, but mistakenly also removed the initialisation
despite the data still being used in the runtime PM callbacks. This bug
was later reproduced when the driver was copied to create the qmp-usbc
driver.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with these drivers.
Fixes: 19281571a4 ("phy: qcom: qmp-usb: split USB-C PHY driver")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 413db06c05 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data from the
qcom-qmp-usb driver, but mistakenly also removed the initialisation
despite the data still being used in the runtime PM callbacks. This bug
was later reproduced when the driver was copied to create the
qmp-usb-legacy driver.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with these drivers.
Fixes: e464a3180a ("phy: qcom-qmp-usb: split off the legacy USB+dp_com support")
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 413db06c05 ("phy: qcom-qmp-usb: clean up probe initialisation")
removed most users of the platform device driver data, but mistakenly
also removed the initialisation despite the data still being used in the
runtime PM callbacks.
Restore the driver data initialisation at probe to avoid a NULL-pointer
dereference on runtime suspend.
Apparently no one uses runtime PM, which currently needs to be enabled
manually through sysfs, with this driver.
Fixes: 413db06c05 ("phy: qcom-qmp-usb: clean up probe initialisation")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240911115253.10920-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The x1e80100 QMP PCIe PHYs all have a pipediv2 clock that needs to be
described.
Fixes: e94b29f2bd ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHYs")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240916082307.29393-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The RK3576 SoC has two independent USB2.0 PHYs, and each PHY has
one port. This adds device specific data for it.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241016073713.14133-4-frawang.cn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible for the USB2 phy in the Rockchip RK3576 SoC.
This change also refactor the clocks list as there are new clocks
adding used for the USB MMU in RK3576 SoC.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241016073713.14133-3-frawang.cn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since some Rockchip SoCs (e.g RK3576) have more than one clock,
this converts the clock management from single to bulk method to
make the driver more flexible.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241016073713.14133-1-frawang.cn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently driver supports only x4 lane based functionality using tx/rx and
tx2/rx2 pair of register sets. To support 8 lane functionality with PCIe3,
PCIe3 related QMP PHY provides additional programming which are available
as txz and rxz based register set. Hence add txz and rxz based registers
usage and programming sequences.
As soon as software programs the txz and rxz based register set, hardware
shall "broadcast" the same settings to the tx/rx pair of registers for all
the 8 lanes, which saves the effort of software programming them one by
one.
There might be some tx and/or rx registers on some lanes need minor tweaks,
program them after programming the txz and rxz reigster set.
In addition, x1e80100 uses QMP PHY ver 6.30 for PCIe Gen4 x8, hence add
two new header files to reflect the new register offsets.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20241017030412.265000-5-quic_qianyu@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PCIe 3rd instance of X1E80100 supports Gen 4 x8 which needs different
8 lane capable QMP PCIe PHY with hardware revision v6.30. Document Gen
4 x8 PHY as separate module.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241017030412.265000-2-quic_qianyu@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the QMP UFS PHY compatible for Qualcomm QCS615 to support physical
layer functionality for UFS found on the SoC. Use fallback to indicate the
compatibility of the QMP UFS PHY on the QCS615 with that on the SM6115.
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241017042300.872963-2-quic_liuxin@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Describe the SGMII/SerDes PHY present on the qcs8300 platforms. Since
qcs8300 shares the same SerDes as sa8775p, so it fallback to the
compatible.
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241017-schema-v2-2-2320f68dc126@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx
left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as
32-bits wide the left-shift operation truncates the upper 16 bits of
information during the calculation of the SMC argument.
The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any
potential integer overflow, i.e. loss of data from upper 16 bits.
Fixes: 82413e562e ("EDAC, mellanox: Add ECC support for BlueField DDR4")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/20240930151056.10158-1-davthompson@nvidia.com
BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0
Read of size 8 at addr ffff8880106fe400 by task repro/72=
bpf_nf_link_release+0xda/0x1e0
bpf_link_free+0x139/0x2d0
bpf_link_release+0x68/0x80
__fput+0x414/0xb60
Eric says:
It seems that bpf was able to defer the __nf_unregister_net_hook()
after exit()/close() time.
Perhaps a netns reference is missing, because the netns has been
dismantled/freed already.
bpf_nf_link_attach() does :
link->net = net;
But I do not see a reference being taken on net.
Add such a reference and release it after hook unreg.
Note that I was unable to get syzbot reproducer to work, so I
do not know if this resolves this splat.
Fixes: 84601d6ee6 ("bpf: add bpf_link support for BPF_NETFILTER programs")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The function parse_lfp_panel_dtd() is called when the driver
attempts to initialize the eDP connector, and it allocates memory,
which is recorded in panel->vbt.lfp_vbt_mode. However, since no
eDP panel is connected, the driver fails at intel_edp_init_dpcd()
and follows the failure path. Unfortunately, the allocated memory
is not freed in this case.
To fix this issue, free the memory in the failure path.
leak info from kmemleak:
"
unreferenced object 0xffff8881252f8800 (size 128):
comm "systemd-udevd", pid 192, jiffies 4294896880
hex dump (first 32 bytes):
e8 fd 00 00 00 04 18 04 a0 04 40 05 00 00 00 03 ..........@.....
03 03 09 03 26 03 00 00 0a 00 00 00 00 00 00 00 ....&...........
backtrace (crc 7448f6b4):
[<ffffffff82475c9b>] kmemleak_alloc+0x4b/0x80
[<ffffffff814bb50e>] __kmalloc_cache_noprof+0x2be/0x390
[<ffffffffa069862c>] intel_bios_init_panel+0x1c4c/0x2720 [xe]
[<ffffffffa0699123>] intel_bios_init_panel_early+0x13/0x20 [xe]
[<ffffffffa06fceb9>] intel_dp_init_connector+0x2f9/0x1080 [xe]
[<ffffffffa06c370a>] intel_ddi_init+0xbba/0xf50 [xe]
[<ffffffffa069b906>] intel_bios_for_each_encoder+0x36/0x60 [xe]
[<ffffffffa06d7bd6>] intel_setup_outputs+0x206/0x450 [xe]
[<ffffffffa06dad33>] intel_display_driver_probe_nogem+0x163/0x1f0 [xe]
[<ffffffffa0680fc7>] xe_display_init_noaccel+0x27/0x70 [xe]
[<ffffffffa05b30d6>] xe_device_probe+0x806/0x9a0 [xe]
[<ffffffffa0612f0f>] xe_pci_probe+0x31f/0x590 [xe]
[<ffffffff81b41718>] local_pci_probe+0x48/0xb0
[<ffffffff81b432c8>] pci_device_probe+0xc8/0x280
[<ffffffff81d5dde8>] really_probe+0xf8/0x390
[<ffffffff81d5e11a>] __driver_probe_device+0x8a/0x170
"
v2 (Jani):
-use intel_bios_fini_panel() to pair with intel_bios_init_panel_early()
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016150154.1466131-1-shuicheng.lin@intel.com
Add support to override topology and firmware filename,
using module parameters. This is helpful for development
and also for testing various scenarios.
Signed-off-by: Anne Onciulescu <anne.onciulescu@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20241017110313.1423258-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the code responsible for selecting the correct device node for
audio endpoint parsing in the rsnd driver. A new helper function
`rsnd_pick_endpoint_node_for_ports()` is introduced to handle the
selection of the endpoint node by checking whether the port is named
'port' or 'ports'.
This change simplifies the logic in both `rsnd_dai_of_node()` and
`rsnd_dai_probe()` functions by replacing repetitive condition checks
with the new helper.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241011175346.1093649-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An object file should not be linked into multiple modules and/or
vmlinux:
scripts/Makefile.build:221: /home/arnd/arm-soc/sound/soc/loongson/Makefile: loongson_i2s.o is added to multiple modules: snd-soc-loongson-i2s-pci snd-soc-loongson-i2s-plat
Change this one to make it a library module with two exported symbols
that will work in any configuration.
Fixes: ba4c5fad59 ("ASoC: loongson: Add I2S controller driver as platform device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241015150958.2294155-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_set_runtime_hwparams() is now doing very simple things.
We can makes it simply inline function, without having EXPORT_SYMBOL_GPL()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cyk0eso0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some more sidecar amplifier quirks.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirk to inform the machine driver to not bind in the cs42l43
microphone DAI link.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support some systems using host microphones add a quirk to allow the
cs42l43 microphone DAI link to be ignored.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The system contains a mechanism for certain DAI links to be included
based on a quirk. Add support for certain DAI links to excluded based on
a quirk, this is useful in situations where the vast majority of SKUs
utilise a feature so it is easier to quirk on those that don't.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new match table entry on Lunarlake for the TM2 laptops
with rt713 and rt1318.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030703.13669-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is required to reset the DMA read/write pointers when the stream is
prepared and restarted after a call to snd_pcm_drain()/snd_pcm_drop().
Also, now that the stream is reset during stop, do not save LLP registers
in the case of STOP/suspend to avoid erroneous delay reporting.
Link: https://github.com/thesofproject/sof/issues/9502
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
All: stable@vger.kernel.org # 6.10.x 6.11.x
Link: https://patch.msgid.link/20241016032910.14601-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of a prepare callback after an xrun or when the PCM is
restarted after a call to snd_pcm_drain/snd_pcm_drop, avoid
reprogramming the SHIM registers but send the PDI stream number so that
the link DMA data can be set. This is needed for the case that the DMA
data is cleared when the PCM is stopped and restarted without being
closed.
Link: https://github.com/thesofproject/sof/issues/9502
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
All: stable@vger.kernel.org # 6.10.x 6.11.x
Link: https://patch.msgid.link/20241016032910.14601-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a PCM is restarted after a snd_pcm_drain/snd_pcm_drop(), the prepare
callback will be invoked and the hw_params will be set again. For the
HDA DAI's, the hw_params function handles this case already but not for
the non-HDA DAI's. So, add the check for link_prepared to verify if the
hw_params should be done again or not. Additionally, for SDW DAI's reset
the PCMSyCM registers as would be done in the case of a start after a
hw_free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
All: stable@vger.kernel.org # 6.10.x 6.11.x
Link: https://patch.msgid.link/20241016032910.14601-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For aggregated DAIs, the node ID is set to the group_id during the DAI
widget's ipc_prepare op. With the current logic, setting the dai_index
for node_id in the dai_config is redundant as it will be overwritten
with the group_id anyway. Removing it will also prevent any accidental
clearing/resetting of the group_id for aggregated DAIs due to the
dai_config calls could that happen before the allocated group_id is
freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
All: stable@vger.kernel.org # 6.10.x 6.11.x
Link: https://patch.msgid.link/20241016032910.14601-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vsock_bpf_prot is set up at runtime. Remove the superfluous init.
No functional change intended.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-4-d6577bbfe742@rbox.co
Dequeuing via vsock_transport::read_skb() left msg_count outdated, which
then confused SOCK_SEQPACKET recv(). Decrease the counter.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-3-d6577bbfe742@rbox.co
Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt()
calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after
vsock_transport::read_skb().
While here, also inform the peer that we've freed up space and it has more
credit.
Failing to update rx_bytes after packet is dequeued leads to a warning on
SOCK_STREAM recv():
[ 233.396654] rx_queue is empty, but rx_bytes is non-zero
[ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589
Fixes: 634f1a7110 ("vsock: support sockmap")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-2-d6577bbfe742@rbox.co
Don't mislead the callers of bpf_{sk,msg}_redirect_{map,hash}(): make sure
to immediately and visibly fail the forwarding of unsupported af_vsock
packets.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-1-d6577bbfe742@rbox.co
Having removed one re-lock cycle on the entity->lock in a patch titled
"drm/sched: Optimise drm_sched_entity_push_job", with only a tiny bit
larger refactoring we can do the same optimisation on the rq->lock.
(Currently both drm_sched_rq_add_entity() and
drm_sched_rq_update_fifo_locked() take and release the same lock.)
To achieve this we make drm_sched_rq_update_fifo_locked() and
drm_sched_rq_add_entity() expect the rq->lock to be held.
We also align drm_sched_rq_update_fifo_locked(),
drm_sched_rq_add_entity() and
drm_sched_rq_remove_fifo_locked() function signatures, by adding rq as a
parameter to the latter.
v2:
* Fix after rebase of the series.
* Avoid naming inconsistency between drm_sched_rq_add/remove. (Christian)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-6-tursulin@igalia.com
When writing to a drm_sched_entity's run-queue, writers are protected
through the lock drm_sched_entity.rq_lock. This naming, however,
frequently collides with the separate internal lock of struct
drm_sched_rq, resulting in uses like this:
spin_lock(&entity->rq_lock);
spin_lock(&entity->rq->lock);
Rename drm_sched_entity.rq_lock to improve readability. While at it,
re-order that struct's members to make it more obvious what the lock
protects.
v2:
* Rename some rq_lock straddlers in kerneldoc, improve commit text. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[pstanner: Fix typo in docstring]
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-5-tursulin@igalia.com
Current kerneldoc for struct drm_sched_rq incompletely documents what
fields are protected by the lock.
This is not good because it is misleading.
Lets fix it by listing all the elements which are protected by the lock.
While at it, lets also re-order the members so all protected by the lock
are in a single group.
v2:
* Refer variables by kerneldoc syntax, more verbose commit text. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-4-tursulin@igalia.com
It does not seem there is a need to set the current entity in FIFO mode
since ot only serves as being a "cursor" in round-robin mode. Even if
scheduling mode is changed at runtime the change in behaviour is simply
to restart from the first entity, instead of continuing in RR mode from
where FIFO left it, and that sounds completely fine.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-3-tursulin@igalia.com
In FIFO mode (which is the default), both drm_sched_entity_push_job() and
drm_sched_rq_update_fifo(), where the latter calls the former, are
currently taking and releasing the same entity->rq_lock.
We can avoid that design inelegance, and also have a miniscule
efficiency improvement on the submit from idle path, by introducing a new
drm_sched_rq_update_fifo_locked() helper and pulling up the lock taking to
its callers.
v2:
* Remove drm_sched_rq_update_fifo() altogether. (Christian)
v3:
* Improved commit message. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-2-tursulin@igalia.com
Tariq Toukan says:
====================
mlx5 misc fixes 2024-10-15
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
Series generated against:
commit 174714f0e5 ("selftests: drivers: net: fix name not defined")
====================
Link: https://patch.msgid.link/20241015093208.197603-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: 9b98d395b8 ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, mlx5 driver does not enforce vector index to be lower than
the maximum number of supported completion vectors when requesting a
new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to
acquire an IRQ with an improper vector index.
To prevent the case above, enforce that vector index value is
valid and lower than maximum in mlx5_comp_eqn_get() before handling the
request.
Fixes: f14c1a14e6 ("net/mlx5: Allocate completion EQs dynamically")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The HWS BWC API uses one lock per queue and usually acquires one of
them, except when doing changes which require locking all queues in
order. Naturally, lockdep isn't too happy about acquiring the same lock
class multiple times, so inform it that each queue lock is a different
class to avoid false positives.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
