Commit 39a6c668e4 (efs: convert efs to use the new mount api)
did not include anything from v2 and v3 that were also submitted.
Fix this by bringing in those changes that were proposed in v2 and
v3.
Fixes: 39a6c668e4 efs: convert efs to use the new mount api.
Signed-off-by: Bill O'Donnell <bodonnel@redhat.com>
Link: https://lore.kernel.org/r/20241014190241.4093825-1-bodonnel@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
__of_changeset_entry_invert() and __of_changeset_entry_revert() don't
modify struct of_changeset_entry arguments, so they can be const.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-5-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Most accesses to struct property do not modify it, so constify struct
property pointers where ever possible in the DT core code.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-4-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Functions which don't change the refcount or otherwise modify struct
device_node can make struct device_node const.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-3-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
pci_register_io_range() does not modify the passed in fwnode_handle, so
make it const.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-1-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 4c27ac45e6 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the function host1x_intr_init() now calls
host1x_hw_intr_disable_all_syncpt_intrs() during probe. However,
host1x_intr_init() is called before runtime power-management is enabled
for Host1x and the function host1x_hw_intr_disable_all_syncpt_intrs() is
accessing hardware registers. So if the Host1x hardware is not enabled
prior to probing then the device will now hang on attempting to access
the registers. So far this is only observed on Tegra186, but potentially
could be seen on other devices.
Fix this by moving the call to the function host1x_intr_init() in probe
to after enabling the runtime power-management in the probe and update
the failure path in probe as necessary.
Fixes: 4c27ac45e6 ("gpu: host1x: Request syncpoint IRQs only during probe")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925160504.60221-1-jonathanh@nvidia.com
(cherry picked from commit dc56f8428e)
Signed-off-by: Thierry Reding <treding@nvidia.com>
- bump version strings, by Simon Wunderlich
- Add flex array to struct batadv_tvlv_tt_data, by Erick Archer
- Use string choice helper to print booleans, by Sven Eckelmann
- replace call_rcu by kfree_rcu for simple kmem_cache_free callback,
by Julia Lawall
-----BEGIN PGP SIGNATURE-----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=6M1z
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20241015' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Add flex array to struct batadv_tvlv_tt_data, by Erick Archer
- Use string choice helper to print booleans, by Sven Eckelmann
- replace call_rcu by kfree_rcu for simple kmem_cache_free callback,
by Julia Lawall
* tag 'batadv-next-pullrequest-20241015' of git://git.open-mesh.org/linux-merge:
batman-adv: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
batman-adv: Use string choice helper to print booleans
batman-adv: Add flex array to struct batadv_tvlv_tt_data
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20241015073946.46613-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZw1/jBUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIO/ZwEAuAVkRgyuC0njVV9PyT7EbZqxHjY+
10v6I6XR8vWmILABALrTIR9wTOyBVgmZzW7AUq8wiFv9FSZmhJfp1KxPdNYA
=L6hT
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
2) Extend BPF selftests to increase coverage of XDP features in combination
with BPF cpumap, from Alexis Lothoré (eBPF Foundation).
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Link: https://patch.msgid.link/20241014211110.16562-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Copying from a 144 byte structure arm_smccc_1_2_regs at an offset of 32
into an 112 byte struct ffa_send_direct_data2 causes a compile-time warning:
| In file included from drivers/firmware/arm_ffa/driver.c:25:
| In function 'fortify_memcpy_chk',
| inlined from 'ffa_msg_send_direct_req2' at drivers/firmware/arm_ffa/driver.c:504:3:
| include/linux/fortify-string.h:580:4: warning: call to '__read_overflow2_field'
| declared with 'warning' attribute: detected read beyond size of field
| (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
| __read_overflow2_field(q_size_field, size);
Fix it by not passing a plain buffer to memcpy() to avoid the overflow
warning.
Fixes: aaef3bc981 ("firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20241014004724.991353-1-gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
New processors have become pickier about the local APIC timer state
before entering low power modes. These low power modes are used (for
example) when you close your laptop lid and suspend. If you put your
laptop in a bag and it is not in this low power mode, it is likely
to get quite toasty while it quickly sucks the battery dry.
The problem boils down to some CPUs' inability to power down until the
CPU recognizes that the local APIC timer is shut down. The current
kernel code works in one-shot and periodic modes but does not work for
deadline mode. Deadline mode has been the supported and preferred mode
on Intel CPUs for over a decade and uses an MSR to drive the timer
instead of an APIC register.
Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to
MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing
to the initial-count register (APIC_TMICT) which is ignored in
TSC-deadline mode.
Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be
enough to tell the hardware that the timer will not fire in any of the
timer modes. But mitigating AMD erratum 411[1] also requires clearing
out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in
practice on Intel Lunar Lake systems, which is the motivation for this
change.
1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf
Fixes: 279f146143 ("x86: apic: Use tsc deadline for oneshot when available")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com
Timestamp values are read using pointers to 64-bit big endian values.
But the type of these pointers is u64 *, host byte order.
Use __be64 * instead.
Flagged by Sparse:
.../gianfar.c:2212:60: warning: cast to restricted __be64
.../gianfar.c:2475:53: warning: cast to restricted __be64
Introduced by
commit cc772ab7cd ("gianfar: Add hardware RX timestamping support").
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241011-gianfar-be64-v1-1-a77ebe972176@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The framework for multicolor brightness control is already in place
in the lp55xx-common code but the function to control the multicolor
brightness for this particular chip is still missing.
Implement the multicolor_brightness_fn function to allow multicolor
brightness control of LEDs connected to the LP5562 LED driver.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Link: https://lore.kernel.org/r/20241009095635.2790613-1-michal.vokac@ysoft.com
Signed-off-by: Lee Jones <lee@kernel.org>
If blk_alloc_disk fails, the variable md->disk is set to an error value.
cleanup_mapped_device will see that md->disk is non-NULL and it will
attempt to access it, causing a crash on this statement
"md->disk->private_data = NULL;".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://marc.info/?l=dm-devel&m=172824125004329&w=2
Cc: stable@vger.kernel.org
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
The left shift int 32 bit integer constants 1 is evaluated using 32 bit
arithmetic and then assigned to a 64 bit unsigned integer. In the case
where the shift is 32 or more this can lead to an overflow. Avoid this
by shifting using the BIT_ULL macro instead.
Fixes: 019aba04f0 ("octeontx2-af: Modify SMQ flush sequence to drop packets")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20241010154519.768785-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
YNL specs can use string expressions for limits, like s32-min
or u16-max. We convert all of those into their numeric values
when generating the code, which isn't always helpful. Try to
retain the string representations in the output. Any sort of
calculations still need the integers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241010151248.2049755-1-kuba@kernel.org
[pabeni@redhat.com: regenerated netdev-genl-gen.c]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TI's J7200 SoC supports USXGMII mode. Add USXGMII mode to the
extra_modes member of the J7200 SoC data.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20241010150543.2620448-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syzbot reports a KASAN failure early during boot on arm64 when building
with GCC 12.2.0 and using the Software Tag-Based KASAN mode:
| BUG: KASAN: invalid-access in smp_build_mpidr_hash arch/arm64/kernel/setup.c:133 [inline]
| BUG: KASAN: invalid-access in setup_arch+0x984/0xd60 arch/arm64/kernel/setup.c:356
| Write of size 4 at addr 03ff800086867e00 by task swapper/0
| Pointer tag: [03], memory tag: [fe]
Initial triage indicates that the report is a false positive and a
thorough investigation of the crash by Mark Rutland revealed the root
cause to be a bug in GCC:
> When GCC is passed `-fsanitize=hwaddress` or
> `-fsanitize=kernel-hwaddress` it ignores
> `__attribute__((no_sanitize_address))`, and instruments functions
> we require are not instrumented.
>
> [...]
>
> All versions [of GCC] I tried were broken, from 11.3.0 to 14.2.0
> inclusive.
>
> I think we have to disable KASAN_SW_TAGS with GCC until this is
> fixed
Disable Software Tag-Based KASAN when building with GCC by making
CC_HAS_KASAN_SW_TAGS depend on !CC_IS_GCC.
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: syzbot+908886656a02769af987@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000f362e80620e27859@google.com
Link: https://lore.kernel.org/r/ZvFGwKfoC4yVjN_X@J2N7QTR9R3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218854
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241014161100.18034-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The Tegra MGBE driver sometimes fails to initialize, reporting the
following error, and as a result, it is unable to acquire an IP
address with DHCP:
tegra-mgbe 6800000.ethernet: timeout waiting for link to become ready
As per the recommendation from the Tegra hardware design team, fix this
issue by:
- clearing the PHY_RDY bit before setting the CDR_RESET bit and then
setting PHY_RDY bit before clearing CDR_RESET bit. This ensures valid
data is present at UPHY RX inputs before starting the CDR lock.
- adding the required delays when bringing up the UPHY lane. Note we
need to use delays here because there is no alternative, such as
polling, for these cases. Using the usleep_range() instead of ndelay()
as sleeping is preferred over busy wait loop.
Without this change we would see link failures on boot sometimes as
often as 1 in 5 boots. With this fix we have not observed any failures
in over 1000 boots.
Fixes: d8ca113724 ("net: stmmac: tegra: Add MGBE support")
Signed-off-by: Paritosh Dixit <paritoshd@nvidia.com>
Link: https://patch.msgid.link/20241010142908.602712-1-paritoshd@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When ->iomap_end is called on a short write to the COW fork it needs to
punch stale delalloc data from the COW fork and not the data fork.
Ensure that IOMAP_F_NEW is set for new COW fork allocations in
xfs_buffered_write_iomap_begin, and then use the IOMAP_F_SHARED flag
in xfs_buffered_write_delalloc_punch to decide which fork to punch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Change to always set xfs_buffered_write_iomap_begin for COW fork
allocations even if they don't overlap existing data fork extents,
which will allow the iomap_end callback to detect if it has to punch
stale delalloc blocks from the COW fork instead of the data fork. It
also means we sample the sequence counter for both the data and the COW
fork when writing to the COW fork, which ensures we properly revalidate
when only COW fork changes happens.
This is essentially a revert of commit 72a048c105 ("xfs: only set
IOMAP_F_SHARED when providing a srcmap to a write"). This is fine because
the problem that the commit fixed has now been dealt with in iomap by
only looking at the actual srcmap and not the fallback to the write
iomap.
Note that the direct I/O path was never changed and has always set
IOMAP_F_SHARED for all COW fork allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Introduce a local iomap_flags variable so that the code allocating new
delalloc blocks in the data fork can fall through to the found_imap
label and reuse the code to unlock and fill the iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buffered_write_iomap_begin can also create delallocate reservations
that need cleaning up, prepare for that by adding support for the COW
fork in xfs_bmap_punch_delalloc_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
All XFS callers of iomap_zero_range and iomap_file_unshare already hold
invalidate_lock, so we can't take it again in
iomap_file_buffered_write_punch_delalloc.
Use the passed in flags argument to detect if we're called from a zero
or unshare operation and don't take the lock again in this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_file_write_zero_eof is the only caller of xfs_zero_range that does
not take XFS_MMAPLOCK_EXCL (aka the invalidate lock). Currently that
is actually the right thing, as an error in the iomap zeroing code will
also take the invalidate_lock to clean up, but to fix that deadlock we
need a consistent locking pattern first.
The only extra thing that XFS_MMAPLOCK_EXCL will lock out are read
pagefaults, which isn't really needed here, but also not actively
harmful.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Split a helper from xfs_file_write_checks that just deal with the
post-EOF zeroing to keep the code readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS (which currently is the only user of iomap_write_delalloc_release)
already holds invalidate_lock for most zeroing operations. To be able
to avoid a deadlock it needs to stop taking the lock, but doing so
in iomap would leak XFS locking details into iomap.
To avoid this require the caller to hold invalidate_lock when calling
iomap_write_delalloc_release instead of taking it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently iomap_file_buffered_write_punch_delalloc can be called from
XFS either with the invalidate lock held or not. To fix this while
keeping the locking in the file system and not the iomap library
code we'll need to life the locking up into the file system.
To prepare for that, open code iomap_file_buffered_write_punch_delalloc
in the only caller, and instead export iomap_write_delalloc_release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Split out a pice of logic from iomap_file_buffered_write_punch_delalloc
that is useful for all iomap_end implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The same bug as in the disconnect code path also exists
in the case of a failure late during the probe process.
The flag must also be set.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20241010131934.1499695-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The intel-xway PHY driver predates the PHY LED framework and currently
initializes all LED pins to equal default values.
Add PHY LED functions to the drivers and don't set default values if
LEDs are defined in device tree.
According the datasheets 3 LEDs are supported on all Intel XWAY PHYs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/81f4717ab9acf38f3239727a4540ae96fd01109b.1728558223.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According the datasheet covering the LED (0x1b) register:
0B Active High LEDx pin driven high when activated
1B Active Low LEDx pin driven low when activated
Make use of the now available 'active-high' property and correctly
reflect the polarity setting which was previously inverted.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/180ccafa837f09908b852a8a874a3808c5ecd2d0.1728558223.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use newly defined 'active-high' property to set the
VEND1_GLOBAL_LED_DRIVE_VDD bit and let 'active-low' clear that bit. This
reflects the technical reality which was inverted in the previous
description in which the 'active-low' property was used to actually set
the VEND1_GLOBAL_LED_DRIVE_VDD bit, which means that VDD (ie. supply
voltage) of the LED is driven rather than GND.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/86a413b4387c42dcb54f587cc2433a06f16aae83.1728558223.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In addition to 'active-low' and 'inactive-high-impedance' also
support 'active-high' property for PHY LED pin configuration.
As only either 'active-high' or 'active-low' can be set at the
same time, WARN and return an error in case both are set.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/91598487773d768f254d5faf06cf65b13e972f0e.1728558223.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Other than described in commit c94d178313 ("dt-bindings: net: phy:
Make LED active-low property common") the absence of the 'active-low'
property means not to touch the polarity settings which are inherited
from reset defaults, the bootloader or bootstrap configuration. Hence,
in order to override a LED pin being active-high in case of the default,
bootloader or bootstrap setting being active-low an additional property
'active-high' is required. Document that property and make it mutually
exclusive to the existing 'active-low' property.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/e9b15613a81129ceecb07ec51f71bbe75425ad2e.1728558223.git.daniel@makrotopia.org
Signed-off-by: Lee Jones <lee@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/leds/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241010203622.839625-5-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
Wei Fang says:
====================
make PHY output RMII reference clock
The TJA11xx PHYs have the capability to provide 50MHz reference clock
in RMII mode and output on REF_CLK pin. Therefore, add the new property
"nxp,rmii-refclk-output" to support this feature. This property is only
available for PHYs which use nxp-c45-tja11xx driver, such as TJA1103,
TJA1104, TJA1120 and TJA1121.
====================
Link: https://patch.msgid.link/20241010061944.266966-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For TJA11xx PHYs, they have the capability to output 50MHz reference
clock on REF_CLK pin in RMII mode, which is called "revRMII" mode in
the PHY data sheet.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Per the RMII specification, the REF_CLK is sourced from MAC to PHY
or from an external source. But for TJA11xx PHYs, they support to
output a 50MHz RMII reference clock on REF_CLK pin. Previously the
"nxp,rmii-refclk-in" was added to indicate that in RMII mode, if
this property present, REF_CLK is input to the PHY, otherwise it
is output. This seems inappropriate now. Because according to the
RMII specification, the REF_CLK is originally input, so there is
no need to add an additional "nxp,rmii-refclk-in" property to
declare that REF_CLK is input.
Unfortunately, because the "nxp,rmii-refclk-in" property has been
added for a while, and we cannot confirm which DTS use the TJA1100
and TJA1101 PHYs, changing it to switch polarity will cause an ABI
break. But fortunately, this property is only valid for TJA1100 and
TJA1101. For TJA1103/TJA1104/TJA1120/TJA1121 PHYs, this property is
invalid because they use the nxp-c45-tja11xx driver, which is a
different driver from TJA1100/TJA1101. Therefore, for PHYs using
nxp-c45-tja11xx driver, add "nxp,rmii-refclk-out" property to
support outputting RMII reference clock on REF_CLK pin.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The last callsite of iommu_present() is removed by commit <45c690aea8>
("drm/tegra: Use iommu_paging_domain_alloc()"). Remove it to avoid dead
code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241009051808.29455-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241007084356.47799-1-ubizjak@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-20-Julia.Lawall@inria.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This fixes a crash when surprise hot-unplugging a PCI device. This crash
happens because during hot-unplug __iommu_group_set_domain_nofail()
attaching the default domain fails when the platform no longer
recognizes the device as it has already been removed and we end up with
a NULL domain pointer and UAF. This is exactly the case referred to in
the second comment in __iommu_device_set_domain() and just as stated
there if we can instead attach the blocking domain the UAF is prevented
as this can handle the already removed device. Implement the blocking
domain to use this handling. With this change, the crash is fixed but
we still hit a warning attempting to change DMA ownership on a blocked
device.
Fixes: c76c067e48 ("s390/pci: Use dma-iommu layer")
Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240910211516.137933-1-mjrosato@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Clarify warning message when failing to disable the MMU-500 prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index when
32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmcGZiAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFzpB/45ANAP3CW6UhJU6hRTH2trlcXtqVOp7Yvb
0zh6HnYiBXP5qncg1FZhbl5xiWKYdcu1zoY3MFggAh1P19Q6wWeZEEo0/NIluvvW
QCHkgyfllgEYZcUKVqRJwClp4bKqvldHiYYUKQQ5L3BGutx7kDrM8i68gpuNBBC+
D6u4eTmjlHPp+3ltD66vGhDLIEVszwewUUc+W/R//1eVHpTyD0hkX3jYg3c+8r5N
pyyIqznishu8Sz4Ddqkl+JRELkzB6JE1Gdyzm30y43mnTy0HdRrS1lkERqVa1RBp
eYi8QqYkcaZwXrXd0Q9c8ZMytSN7KYqncVBH3v688+wRALA70fpC
=n91J
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
Arm SMMU fixes for 6.12
- Clarify warning message when failing to disable the MMU-500 prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index when
32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Add following peripherals support for the Emtop i.MX8M Mini Baseboard
* Wi-Fi
* Audio
* SD card
* RTC
* CAN bus
* USB OTG
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
