Many qcom clock drivers do not have .width set. In that case value of
(p)->width - 1 will be negative which breaks clock tree. Fix this
by checking if width is zero, and pass 3 to GENMASK if that's the case.
Fixes: 1c3541145c ("clk: qcom: support for 2 bit PLL post divider")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Link: https://lore.kernel.org/r/20241006-fix-postdiv-mask-v3-1-160354980433@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For historical reasons on SM8450 the second PCIe host (pcie1) also keeps
a reference to the PIPE clock coming from the PHY. Commit e768628406
("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc") has
updated the PHY to use #clock-cells = <1>, making just <&pcie1_phy>
clock specification invalid. Update corresponding clock entry in the
PCIe1 host node.
/soc@0/pcie@1c08000: Failed to get clk index: 2 ret: -22
qcom-pcie 1c08000.pcie: Failed to get clocks
qcom-pcie 1c08000.pcie: probe with driver qcom-pcie failed with error -22
Fixes: e768628406 ("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241006-fix-sm8450-pcie1-v1-1-4f227c9082ed@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This driver is compatible with both sm8550 and sm8650, fix the Kconfig
entry to reflect that.
Fixes: da1f361c88 ("clk: qcom: videocc-sm8550: Add SM8650 video clock controller")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241005144047.2226-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Trackpad HID device on T14s could be found on two possible slave addresses
(hid@15 and hid@2c) on i2c0 instance.
With the current state of DT boot, there is no way to patch the device
tree at runtime during boot. This, however results in non-functional
trackpad on Product Models 21N2ZC5PUS which have trackpad on hid@2c
slave address.
This patch adds hid@2c device along with hid@15 to get it working on
both the variants. This should work as i2c-hid driver will stop
probing the device if there is nothing on the slave address, we can
actually keep both devices enabled in DT, and i2c-hid driver will
only probe the existing one.
The only problem is that we cannot setup pinctrl in both device nodes,
as two devices with the same pinctrl will cause pin conflict that makes
the second device fail to probe. Let's move the pinctrl state up to
parent node along with the parent pinctrl to solve this problem.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241004130849.2944-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based
on X1E80100.
Working:
* Touchpad
* Keyboard (only post suspend&resume, i2c-hid patch required [1])
* Touchscreen
* eDP (low-res IPS, OLED) with brightness control
* NVME
* USB Type-C ports in USB2/USB3 (one orientation)
* WiFi
* GPU/aDSP/cDSP firmware loading (requires binaries from Windows)
* Lid switch
* Sleep/suspend, nothing visibly broken on resume
Not working:
* Speakers (WIP, pin guessing, x4 WSA8845)
* Microphones (WIP, pin guessing, dual array)
* Fingerprint Reader (WIP, USB MP with ptn3222)
* USB as DP/USB3 (WIP, PS8830 based)
* Camera (Likely OV01A10)
* EC over i2c
Should be working, but cannot be tested due to lack of hw:
* higher res IPS panel
[1] https://lore.kernel.org/all/20240925100303.9112-1-alex.vinarskis@gmail.com/
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Link: https://lore.kernel.org/r/20241003211139.9296-4-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
cgroup.max.depth is the maximum allowed descent depth below the current
cgroup. If the actual descent depth is equal or larger, an attempt to
create a new child cgroup will fail. However due to the cgroup->max_depth
is of int type and having the default value INT_MAX, the condition
'level > cgroup->max_depth' will never be satisfied, and it will cause
an overflow of the level after it reaches to INT_MAX.
Fix it by starting the level from 0 and using '>=' instead.
It's worth mentioning that this issue is unlikely to occur in reality,
as it's impossible to have a depth of INT_MAX hierarchy, but should be
be avoided logically.
Fixes: 1a926e0bba ("cgroup: implement hierarchy limits")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The 2 USB-C ports on x1e78100-t14s are OTG-capable, remove the dr_mode
override to enable OTG.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011231624.30628-3-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 3 USB ports on x1e80100-crd are OTG-capable, remove the dr_mode
override to enable OTG.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011231624.30628-2-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These 3 controllers support OTG and the driver requires the usb-role-switch
property to enable OTG. Add the property to enable OTG by default.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011231624.30628-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add missing Broadcast_AND region to the LLCC block for x1e80100,
as the LLCC version on this platform is 4.1 and it provides the region.
This also fixes the following error caused by the missing region:
[ 3.797768] qcom-llcc 25000000.system-cache-controller: error -EINVAL: invalid resource (null)
This error started showing up only after the new regmap region called
Broadcast_AND that has been added to the llcc-qcom driver.
Cc: stable@vger.kernel.org # 6.11: 055afc34fd: soc: qcom: llcc: Add regmap for Broadcast_AND region
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241014-x1e80100-dts-llcc-add-broadcastand_region-v2-1-5ee6ac128627@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As described in commit b07996c7ab ("sched_ext: Don't hold
scx_tasks_lock for too long"), we're doing a cond_resched() every 32
calls to scx_task_iter_next() to avoid RCU and other stalls. That commit
also added a cpu_relax() to the codepath where we drop and reacquire the
lock, but as Waiman described in [0], cpu_relax() should only be
necessary in busy loops to avoid pounding on a cacheline (or to allow a
hypertwin to more fully utilize a core).
Let's remove the unnecessary cpu_relax().
[0]: https://lore.kernel.org/all/35b3889b-904a-4d26-981f-c8aa1557a7c7@redhat.com/
Cc: Waiman Long <llong@redhat.com>
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
"idle-state-name" is not a valid property for "domain-idle-state"
binding, so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241014161631.1527918-2-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A642L (speedbin 0x81) uses index 4, so this commit sets the fourth bit
for A642L supported opps.
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20241014194825.44406-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DWC PCIe controller can be used with its internal MSI controller or
with an external one such as the GICv3 Interrupt Translation Service
(ITS).
Add the msi-map properties needed to use the GIC ITS. This will also
make Linux switch to the ITS implementation, which allows for assigning
affinity to individual MSIs. This specifically allows NVMe and Wi-Fi
interrupts to be processed on all cores (and not just on CPU0).
Note that using the GIC ITS on x1e80100 will cause Advanced Error
Reporting (AER) interrupts to be received on errors unlike when using
the internal MSI controller. Consequently, notifications about
(correctable) errors may now be logged for errors that previously went
unnoticed.
Also note that PCIe5 (and PCIe3) can currently only be used with the
internal MSI controller due to a platform (firmware) limitation.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241009161715.14994-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
timers tests defines CLOCKIDs locally. Remove all local CLOCKIDs except
CLOCK_HWSPECIFIC and use defines from time.h header file.
CLOCK_HWSPECIFIC and CLOCK_SGI_CYCLE are the same and CLOCK_SGI_CYCLE
is deprecated,
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add documentation for the kselftests focused on testing devices and
point to it from the kselftest documentation. There are multiple tests
in this category so the aim of this page is to make it clear when to run
each test.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
improve timer_create failure message with strerror() function
to give more information to the user.
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove local NSEC_PER_SEC and USEC_PER_SEC defines. Pick them up from
include/vdso/time64.h. This requires -I $(top_srcdir) to the timers
Makefile to include the include/vdso/time64.h.
posix_timers test names the defines NSECS_PER_SEC and USECS_PER_SEC.
Change posix_timers test references to the defines to match the
defines in the header file.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The fwnode_handle passed into find_io_range_by_fwnode() and
logic_pio_trans_hwaddr() are not modified, so make them const.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-2-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
send_message() does not block in the MBOX implementation. This is
because the mailbox layer has its own queue. However, this confuses
the per xfer timeouts as they all start their timeout ticks in
parallel.
Consider a case where the xfer timeout is 30ms and a SCMI transaction
takes 25ms:
| 0ms: Message #0 is queued in mailbox layer and sent out, then sits
| at scmi_wait_for_message_response() with a timeout of 30ms
| 1ms: Message #1 is queued in mailbox layer but not sent out yet.
| Since send_message() doesn't block, it also sits at
| scmi_wait_for_message_response() with a timeout of 30ms
| ...
| 25ms: Message #0 is completed, txdone is called and message #1 is sent
| 31ms: Message #1 times out since the count started at 1ms. Even though
| it has only been inflight for 6ms.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Message-Id: <20241014160717.1678953-1-justin.chen@broadcom.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With the "drm/msm: add a display mmu fault handler" series [1] we saw
issues in the field where memory allocation was failing when
allocating space for registers in msm_disp_state_dump_regs().
Specifically we were seeing an order 5 allocation fail. It's not
surprising that order 5 allocations will sometimes fail after the
system has been up and running for a while.
There's no need here for contiguous memory. Change the allocation to
kvzalloc() which should make it much less likely to fail.
[1] https://lore.kernel.org/r/20240628214848.4075651-1-quic_abhinavk@quicinc.com/
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/619658/
Link: https://lore.kernel.org/r/20241014093605.2.I72441365ffe91f3dceb17db0a8ec976af8139590@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
If the allocation in msm_disp_state_dump_regs() failed then
`block->state` can be NULL. The msm_disp_state_print_regs() function
_does_ have code to try to handle it with:
if (*reg)
dump_addr = *reg;
...but since "dump_addr" is initialized to NULL the above is actually
a noop. The code then goes on to dereference `dump_addr`.
Make the function print "Registers not stored" when it sees a NULL to
solve this. Since we're touching the code, fix
msm_disp_state_print_regs() not to pointlessly take a double-pointer
and properly mark the pointer as `const`.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/619657/
Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
When (mode->clock * 1000) is larger than (1<<31), int to unsigned long
conversion will sign extend the int to 64 bits and the pclk_rate value
will be incorrect.
Fix this by making the result of the multiplication unsigned.
Note that above (1<<32) would still be broken and require more changes, but
its unlikely anyone will need that anytime soon.
Fixes: c4d8cfe516 ("drm/msm/dsi: add implementation for helper functions")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/618434/
Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Historically CRTC resources (LMs and CTLs) were assigned in
dpu_crtc_atomic_begin(). The commit 9222cdd27e ("drm/msm/dpu: move hw
resource tracking to crtc state") simply moved resources to
struct dpu_crtc_state, without changing the code sequence. Later on the
commit b107603b4a ("drm/msm/dpu: map mixer/ctl hw blocks in encoder
modeset") rearanged the code, but still kept the cstate->num_mixers
assignment to happen during commit phase. This makes dpu_crtc_state
inconsistent between consequent atomic_check() calls.
Move CRTC resource assignment to happen at the end of
dpu_encoder_virt_atomic_check().
Fixes: b107603b4a ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/612235/
Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-2-617e1ecc4b7a@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The commit b954fa6baa ("drm/msm/dpu: Refactor rm iterator") removed
zero-init of the hw_ctl array, but didn't change the error condition,
that checked for hw_ctl[i] being NULL. At the same time because of the
early returns in case of an error dpu_encoder_phys might be left with
the resources assigned in the previous state. Rework assigning of hw_pp
/ hw_ctl to the dpu_encoder_phys in order to make sure they are always
set correctly.
Fixes: b954fa6baa ("drm/msm/dpu: Refactor rm iterator")
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/612233/
Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-1-617e1ecc4b7a@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Copying to a 16 byte structure into an 8-byte struct member
causes a compile-time warning:
| In file included from drivers/firmware/arm_ffa/driver.c:25:
| In function 'fortify_memcpy_chk',
| inlined from 'export_uuid' at include/linux/uuid.h:88:2,
| inlined from 'ffa_msg_send_direct_req2' at drivers/firmware/arm_ffa/driver.c:488:2:
| include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field'
| declared with attribute warning: detected write beyond size of field
| (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
| __write_overflow_field(p_size_field, size);
Use a union for the conversion instead and make sure the byte order
is fixed in the process.
Fixes: aaef3bc981 ("firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20240909110938.247976-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This feature flag enables GuC autoteardown which allows for a grace
period before session teardown.
Also add a HAS_PXP() helper to share with the other place that wants
to check.
Signed-off-by: Juston Li <juston.li@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906174038.1468026-1-John.C.Harrison@Intel.com
There's issue as follows when concurrently installing the f2fs.ko
module and mounting the f2fs file system:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
RIP: 0010:__bio_alloc+0x2fb/0x6c0 [f2fs]
Call Trace:
<TASK>
f2fs_submit_page_bio+0x126/0x8b0 [f2fs]
__get_meta_page+0x1d4/0x920 [f2fs]
get_checkpoint_version.constprop.0+0x2b/0x3c0 [f2fs]
validate_checkpoint+0xac/0x290 [f2fs]
f2fs_get_valid_checkpoint+0x207/0x950 [f2fs]
f2fs_fill_super+0x1007/0x39b0 [f2fs]
mount_bdev+0x183/0x250
legacy_get_tree+0xf4/0x1e0
vfs_get_tree+0x88/0x340
do_new_mount+0x283/0x5e0
path_mount+0x2b2/0x15b0
__x64_sys_mount+0x1fe/0x270
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Above issue happens as the biset of the f2fs file system is not
initialized before register "f2fs_fs_type".
To address above issue just register "f2fs_fs_type" at the last in
init_f2fs_fs(). Ensure that all f2fs file system resources are
initialized.
Fixes: f543805fcd ("f2fs: introduce private bioset")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:896!
CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:f2fs_evict_inode+0x58c/0x610
Call Trace:
__die_body+0x15/0x60
die+0x33/0x50
do_trap+0x10a/0x120
f2fs_evict_inode+0x58c/0x610
do_error_trap+0x60/0x80
f2fs_evict_inode+0x58c/0x610
exc_invalid_op+0x53/0x60
f2fs_evict_inode+0x58c/0x610
asm_exc_invalid_op+0x16/0x20
f2fs_evict_inode+0x58c/0x610
evict+0x101/0x260
dispose_list+0x30/0x50
evict_inodes+0x140/0x190
generic_shutdown_super+0x2f/0x150
kill_block_super+0x11/0x40
kill_f2fs_super+0x7d/0x140
deactivate_locked_super+0x2a/0x70
cleanup_mnt+0xb3/0x140
task_work_run+0x61/0x90
The root cause is: creating large files during disable checkpoint
period results in not enough free segments, so when writing back root
inode will failed in f2fs_enable_checkpoint. When umount the file
system after enabling checkpoint, the root inode is dirty in
f2fs_evict_inode function, which triggers BUG_ON. The steps to
reproduce are as follows:
dd if=/dev/zero of=f2fs.img bs=1M count=55
mount f2fs.img f2fs_dir -o checkpoint=disable:10%
dd if=/dev/zero of=big bs=1M count=50
sync
rm big
mount -o remount,checkpoint=enable f2fs_dir
umount f2fs_dir
Let's redirty inode when there is not free segments during checkpoint
is disable.
Signed-off-by: Qi Han <hanqi@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After release a file and subsequently reserve it, the FSCK flag is set
when the file is deleted, as shown in the following backtrace:
F2FS-fs (dm-48): Inconsistent i_blocks, ino:401231, iblocks:1448, sectors:1472
fs_rec_info_write_type+0x58/0x274
f2fs_rec_info_write+0x1c/0x2c
set_sbi_flag+0x74/0x98
dec_valid_block_count+0x150/0x190
f2fs_truncate_data_blocks_range+0x2d4/0x3cc
f2fs_do_truncate_blocks+0x2fc/0x5f0
f2fs_truncate_blocks+0x68/0x100
f2fs_truncate+0x80/0x128
f2fs_evict_inode+0x1a4/0x794
evict+0xd4/0x280
iput+0x238/0x284
do_unlinkat+0x1ac/0x298
__arm64_sys_unlinkat+0x48/0x68
invoke_syscall+0x58/0x11c
For clusters of the following type, i_blocks are decremented by 1 and
i_compr_blocks are incremented by 7 in release_compress_blocks, while
updates to i_blocks and i_compr_blocks are skipped in reserve_compress_blocks.
raw node:
D D D D D D D D
after compress:
C D D D D D D D
after reserve:
C D D D D D D D
Let's update i_blocks and i_compr_blocks properly in reserve_compress_blocks.
Fixes: eb8fbaa533 ("f2fs: compress: fix to check unreleased compressed cluster")
Signed-off-by: Qi Han <hanqi@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use struct_size() to calculate the number of bytes to allocate for a
cloned acl.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When segs_per_sec is larger than 1, section may contain invalid segments,
mtime should be the average value of each valid blocks,
so introduce f2fs_get_section_mtime to
record the average mtime of all valid blocks in a section.
Signed-off-by: liuderong <liuderong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The command given in the changes.rst document to check the version of
btrfs-progs is:
-> btrfsck
which does not output the version, and according to manual page of the
btrfs-progs the command to check the version of btrfs-progs is:
-> btrfs --version
Add a fix changing the command to check the version of btrfs-progs.
Signed-off-by: Nihar Chaithanya <niharchaithanya@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241012141425.11852-1-niharchaithanya@gmail.com
Add Cortex-A720, Cortex-A725, Cortex-X1C, Cortex-X3 and Cortex-X925 into
the common data source encoding list. For everyone of these CPUs, it
technical reference manual defines the data source packet as the common
encoding format.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-8-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add Neoverse-V2 MIDR to the common data source encoding range list.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-7-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The 'midr' field is replaced by the MIDR values stored in metadata (per
CPU wise). Remove the 'midr' field as it is no longer used.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-6-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use the info in the metadata to decide if the data source feature is
supported. The CPU MIDR must be in the CPU list for the common data
source encoding.
For the metadata version 1, it doesn't include info for MIDR. In this
case, due to absent info for making decision, print out warning to
remind users to upgrade tool and returns false.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-5-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Introduce the arm_spe__is_homogeneous() function, it uses to check if
Arm SPE is homogeneous cross all CPUs.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-4-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The Neoverse CPUs follow the common data source encoding, and other
CPU variants can share the same format.
Rename the CPU list and data source definitions as common data source
names. This change prepares for appending more CPU variants.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The arm_spe__synth_data_source_generic() function is invoked when the
tool detects that CPUs do not support data source packets and falls back
to synthesizing only the memory level.
Rename it to arm_spe__synth_memory_level() for better reflecting its
purpose.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As Ian Rogers <irogers@google.com> pointed out, intel-cqm.c is neither
used nor built. It was deleted in the following commit:
commit b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
However, it resurfaced soon after in the following commit:
commit 5c9295bfe6 ("perf tests: Remove Intel CQM perf test")
It should be deleted once and for all.
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Matt Fleming <mfleming@cloudflare.com>
Link: https://lore.kernel.org/r/20241011055700.4142694-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
