Replace kfree_skb() with kfree_skb_reason() in vxlan_mdb_xmit. No drop
reasons are introduced in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb/dev_kfree_skb with kfree_skb_reason in vxlan_xmit_one.
No drop reasons are introduced in this commit.
The only concern of mine is replacing dev_kfree_skb with
kfree_skb_reason. The dev_kfree_skb is equal to consume_skb, and I'm not
sure if we can change it to kfree_skb here. In my option, the skb is
"dropped" here, isn't it?
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in vxlan_xmit(). Following
new skb drop reasons are introduced for vxlan:
/* no remote found for xmit */
SKB_DROP_REASON_VXLAN_NO_REMOTE
/* packet without necessary metadata reached a device which is
* in "external" mode
*/
SKB_DROP_REASON_TUNNEL_TXINFO
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the return type of vxlan_set_mac() from bool to enum
skb_drop_reason. In this commit, the drop reason
"SKB_DROP_REASON_LOCAL_MAC" is introduced for the case that the source
mac of the packet is a local mac.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the return type of vxlan_snoop() from bool to enum
skb_drop_reason. In this commit, two drop reasons are introduced:
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make vxlan_remcsum() support skb drop reasons by changing the return
value type of it from bool to enum skb_drop_reason.
The only drop reason in vxlan_remcsum() comes from pskb_may_pull_reason(),
so we just return it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce skb drop reasons to the function vxlan_rcv(). Following new
drop reasons are added:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_IP_TUNNEL_ECN
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make skb_vlan_inet_prepare return the skb drop reasons, which is just
what pskb_may_pull_reason() returns. Meanwhile, adjust all the call of
it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the function pskb_inet_may_pull_reason() and make
pskb_inet_may_pull a simple inline call to it. The drop reasons of it just
come from pskb_may_pull_reason().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the function pskb_network_may_pull_reason() and make
pskb_network_may_pull() a simple inline call to it. The drop reasons of
it just come from pskb_may_pull_reason.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix crash in memcpy on 8xx due to dcbz workaround since recent changes.
Thanks to: Christophe Leroy.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZwsCdwAKCRAF0oADX8se
IQ62AQCw2iHYOwLeymqgAhXaXh1kmpJnqdfjxsrC7jBz0HpqbwEA3fD0nCxwN2T4
bXZBsA2BR+WqKV+1y8L6Af6dC1Gr1Qg=
=5L6I
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes
Thanks to Christophe Leroy.
* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz
This device is a subset of J784S4 and shares the same memory map and
thus the nodes are being reused from J784S4 to avoid duplication.
Here are some of the salient features of the J742S2 automotive grade
application processor:
The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive, ADAS and industrial
applications requiring AI at the network edge. This SoC extends the K3
Jacinto 7 family of SoCs with focus on raising performance and
integration while providing interfaces, memory architecture and compute
performance for multi-sensor, high concurrency applications.
Some changes that this devices has from J784S4 are:
* 4x Cortex-A72 vs 8x Cortex-A72
* 3x C7x DSP vs 4x C7x DSP
* 4 port ethernet switch vs 8 port ethernet switch
( Refer Table 2-1 for Device comparison with J7AHP )
Link: https://www.ti.com/lit/pdf/spruje3 (TRM)
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-4-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Refactor J784s4-evm to a common file which uses the
superset device to allow reuse in j742s2-evm which uses the subset part.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-2-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Refactor J784s4 SoC files to a common file which uses the
superset device to allow reuse in j742s2-evm which uses the subset part.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-1-6a7aa2736797@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Only for_each_sgtable_dma_sg() should be used to walk through a SG table
to grab correct bus address and length pair after calling DMA MAP API on
a SG table as DMA MAP APIs updates the SG table and for_each_sgtable_sg()
walks through the original SG table.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193252.3888544-1-quic_jhugo@quicinc.com
Add basic support for the new AIC080 product. The PCIe Device ID is
0xa080. AIC080 is a lower cost, lower performance SKU variant of AIC100.
From the qaic perspective, it is the same as AIC100.
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004195209.3910996-1-quic_jhugo@quicinc.com
The ipc_router channel allows AF_QIPCRTR clients and services to
communicate with the AIC100 device. The ipc_router MHI transport layer
expects the channel to be named exactly "IPCR".
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004164033.3825986-1-quic_jhugo@quicinc.com
Although I don't hold expertise on the display side of VC4, I'd like to
help reviewing patches that are related to the 3D side of the VC4 driver.
As V3D maintainer, I hold some expertise with Broadcom GPUs and I'm
constantly testing kernels on RPi 3-5.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009141240.1948482-1-mcanal@igalia.com
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
```
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/20241012105743.12450-2-matsievskiysv@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
By adding support for the V4L2_FMTDESC_FLAG_ENUM_ALL flag into the driver
we allow userspace applications to discover all possible
pixel formats of the hardware block. This way userspace can decide
which decoder to use given the supported pixel formats.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Since the V4L2_FMTDESC_FLAG_ENUM_ALL flag mostly targets stateless
decoder pixel-format enumeration, update visl test driver to use it.
When V4L2_FMTDESC_FLAG_ENUM_ALL flag is set let the driver returns
one more pixel format.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When the index is ORed with V4L2_FMTDESC_FLAG_ENUM_ALL the
driver clears the flag and enumerate all the possible formats,
ignoring any limitations from the current configuration.
Drivers which do not support this flag yet always return an EINVAL.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: improved doc when the new flag is not supported by the driver]
On Qualcomm SM8250 SoC there are two sets of regulators, and each of
both sets is specific to six CSIPHY IPs. At the moment there is no
proper split of two "combined" regulators with quite arbitrary selected
names in the driver or platform CAMSS device tree node, however for sake
of clarity and better hardware description it makes sense to move the
currently existing regulator resources from all CSID subdevices to all
CSIPHY subdevices.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This change allows to properly assign and manage supply regulator
resources by CSIPHY subdevices of CAMSS, this is needed to fine tune
description of supply regulators on newer platforms, conversion of
old platforms to the new scheme is also anticipated.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Depeng Shao <quic_depengs@quicinc.com> # SM8550
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
New SoCs have CSID devices inside of a shared "wrapper" i.e. a set of regs
which is responsible for manging the muxes of the CSID to various other
blocks throughout CAMSS.
Not every SoC has this top-level muxing layer so make it optional depending
on whether its declared as a resource or not.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is a chance to meet runtime issues during configuration of CAMSS
power domains, because on the error path dev_pm_domain_detach() is
unexpectedly called with NULL or error pointer.
One of the simplest ways to reproduce the problem is to probe CAMSS
driver before registration of CAMSS power domains, for instance if
a platform CAMCC driver is simply not built.
Warning backtrace example:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a2
<snip>
pc : dev_pm_domain_detach+0x8/0x48
lr : camss_probe+0x374/0x9c0
<snip>
Call trace:
dev_pm_domain_detach+0x8/0x48
platform_probe+0x70/0xf0
really_probe+0xc4/0x2a8
__driver_probe_device+0x80/0x140
driver_probe_device+0x48/0x170
__device_attach_driver+0xc0/0x148
bus_for_each_drv+0x88/0xf0
__device_attach+0xb0/0x1c0
device_initial_probe+0x1c/0x30
bus_probe_device+0xb4/0xc0
deferred_probe_work_func+0x90/0xd0
process_one_work+0x164/0x3e0
worker_thread+0x310/0x420
kthread+0x120/0x130
ret_from_fork+0x10/0x20
Fixes: 23aa4f0cd3 ("media: qcom: camss: Move VFE power-domain specifics into vfe.c")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZwnsDSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZYjAP9QKRk5
1i/g9TyqFCurbt+R4BJGiNg+89WUnLxgNbThsgD9FqmXRsm2mGok02lQS4bz5Asv
OkNVO2se/q6IlplijV8=
=RCJc
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon driver
to match other sensor labels
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmcJ0JQACgkQyx8mb86f
mYFLUw//YIj5KHhM+oociasLPKGBflzYzq3WiNAQwSIKq2VVfX9lG9iQBjbzI9h2
tmtREAInTnO8dQLGexVKTihlqVY/vfMahp7U9d1KfbAmY0hXGLY9SunE2hWt0HN0
wDRRVzodxFTpk4FehkNRDZMbRkXeTnaCvRz5Rj22gfs1ZW0qc3KBd7IZYX8ehU/x
KxADCPZTXpeYXO/Mezc0/eCVEn0gkJdLrtE4gBj25OyOwzsVcVJLqxEy3OZlmJ6n
ngRWDot8NdpoQCbAlvOTijSsWU/5WQORAyhDFB95PivAY4FaNPaeodmiRtfb9cxs
bqO1UqViLGKcI+I6mB1Mll7O63aAxfeb96o3Po0kWD2znRlutiJuxVSHmh16sdG9
sil6x3zXtCSOXsQilJW2tIg8ZOXk5UQzy/9npgRtV5QSnqUZBCRzwAyIBVOjgZix
RJ3vKP9HprjnQUemYLTENEr9Bh26CrYmGE31jHjuDECAGM+VRbYXtAENp4T4boZW
YlQETZNDVr8a564lAk7hCRRTUEJb7wnoQtScWfhhVspgeY19EaYXTR7RjcMeqrm2
8uHg3pg3wTZupsBm0Yxc5t8UzF09YcxyzCXdbYrxzg6iN9rWO0E05Avzpk652BF+
8lYxLSE/Bwk08hIcSIWRTcMWSD8R7lIszL8dJuWVWa0O3XejSWE=
=lXfx
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels
* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
Since adding the PCI power control code, we may end up with a race between
the pwrctl platform device rescanning the bus and host controller probe
functions. The latter need to take the rescan lock when adding devices or
we may end up in an undefined state having two incompletely added devices
and hit the following crash when trying to remove the device over sysfs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Call trace:
__pi_strlen+0x14/0x150
kernfs_find_ns+0x80/0x13c
kernfs_remove_by_name_ns+0x54/0xf0
sysfs_remove_bin_file+0x24/0x34
pci_remove_resource_files+0x3c/0x84
pci_remove_sysfs_dev_files+0x28/0x38
pci_stop_bus_device+0x8c/0xd8
pci_stop_bus_device+0x40/0xd8
pci_stop_and_remove_bus_device_locked+0x28/0x48
remove_store+0x70/0xb0
dev_attr_store+0x20/0x38
sysfs_kf_write+0x58/0x78
kernfs_fop_write_iter+0xe8/0x184
vfs_write+0x2dc/0x308
ksys_write+0x7c/0xec
Fixes: 4565d2652a ("PCI/pwrctl: Add PCI power control core code")
Link: https://lore.kernel.org/r/20241003084342.27501-1-brgl@bgdev.pl
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Tested-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010
RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6
R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790
R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001
FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ts2020_probe+0xad/0xe10 [ts2020]
i2c_device_probe+0x421/0xb40
really_probe+0x266/0x850
...
The cause of the problem is that when using sysfs to dynamically register
an i2c device, there is no platform data, but the probe process of ts2020
needs to use platform data, resulting in a null pointer being accessed.
Solve this problem by adding checks to platform data.
Fixes: dc245a5f9b ("[media] ts2020: implement I2C client bindings")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.
To mitigate this, free the buffer when allegro_alloc_buffer fails.
Fixes: f20387dfd0 ("media: allegro: add Allegro DVT video IP core driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
My new address is alexey.klimov@linaro.org
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver is now enabled for compile-testing on architectures
that may not have I/O port access:
drivers/media/cec/platform/seco/seco-cec.c: In function 'smb_word_op.constprop.isra':
include/asm-generic/io.h:542:14: error: call to '_inb' declared with attribute error: inb()) requires CONFIG_HAS_IOPORT
Add a Kconfig dependency again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add Dexatek Technology Ltd USB Video Grabber 1d19:6108 to the cx231xx
driver. This device is sold under the name "BAUHN DVD Maker (DK8723)" by
ALDI in Australia.
This device is similar to 1d19:6109, which is already included in cx231xx.
Both video and audio capture function correctly after installing the
patched cx231xx driver.
Patch Changelog
v1:
- Initial submission.
v2:
- Fix SoB + Improve subject.
v3:
- Rephrase message to not exceed 75 characters per line.
- Removed reference to external GitHub URL.
Signed-off-by: Rohan Barar <rohan.barar@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There are three separate issues preventing color capture with S-Video
on August VGB100 with the cx231xx driver (same vid/pid as OTG102):
1. `cx231xx_set_decoder_video_input` is called with a u32 passed
as its third argument, yet this functions expects a u8 instead.
Some information about the configuration of the video mux is lost
in the conversion, so that ch2 and ch3 do not get set by
`cx231xx_afe_set_input_mux` (expecting a u32 but being passed a u8).
2. The input pin for the chroma signal is not correctly specified
in cx231xx-cards.c, which can be verified by looking at the inf file
coming with the VGB100 and OTG102' drivers for Windows.
The mistake in the cx231xx driver likely stems from a wrong comment
in the same file, suggesting VIN1_2 for chroma,
while VIN3_2 is actually used.
3. Even after fixing the two issues above, the captured stream remains
essentially B&W (although acquiring some pale green shades, suggesting
we're moving in the right direction).
After tests with somewhat random changes, it was found that removing
`CX25840_SVIDEO_ON` from the vmux configuration in cx231xx-cards.c
results in a captured stream with the expected colors.
Signed-off-by: Fabio Luongo <f.langufo.l@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Atomicity violation occurs when the fmc_send_cmd() function is executed
simultaneously with the modification of the fmdev->resp_skb value.
Consider a scenario where, after passing the validity check within the
function, a non-null fmdev->resp_skb variable is assigned a null value.
This results in an invalid fmdev->resp_skb variable passing the validity
check. As seen in the later part of the function, skb = fmdev->resp_skb;
when the invalid fmdev->resp_skb passes the check, a null pointer
dereference error may occur at line 478, evt_hdr = (void *)skb->data;
To address this issue, it is recommended to include the validity check of
fmdev->resp_skb within the locked section of the function. This
modification ensures that the value of fmdev->resp_skb does not change
during the validation process, thereby maintaining its validity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: e8454ff7b9 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch corrects spelling errors in comments within
the media/dvb-frontends directory found by codespell to enhance
clarity and maintainability of the code.
This change does not affect the functionality.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This commit corrects spelling errors in comments within
the media/tuners directory found by codespell to enhance
clarity and maintainability of the code.
This change does not affect the functionality.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Acked-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: TaoJiang <tao.jiang_2@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The video drvdata should be set before the video device is registered,
otherwise video_drvdata() may return NULL in the open() file ops, and led
to oops.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: TaoJiang <tao.jiang_2@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
I will no longer be an employee of TI, so update my email in maintainer
list.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
I will no longer be an employee of TI, so update my email in the
MAINTAINERS file and .mailmap.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
