In bnxt_re_add_device(), when register netdev notifier fails, driver is
not unregistering the IB device in the error cleanup path. Also, removed
the duplicate cleanup in error path of bnxt_re_probe.
Fixes: 94a9dc6ac8 ("RDMA/bnxt_re: Group all operations under add_device and remove_device")
Link: https://patch.msgid.link/r/1728373302-19530-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.
Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy.
Fixes: 2ad4e6303a ("RDMA/bnxt_re: Implement doorbell pacing algorithm")
Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the HWRM command fails, driver currently returns -EFAULT(Bad
address). This does not look correct.
Modified to return -EIO(I/O error).
Fixes: cc1ec769b8 ("RDMA/bnxt_re: Fixing the Control path command and response handling")
Fixes: 65288a22dd ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command")
Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently driver is not getting correct srq. Dereference only if qplib has
a valid srq.
Fixes: b02fd3f79e ("RDMA/bnxt_re: Report async events and errors")
Link: https://patch.msgid.link/r/1728373302-19530-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver exports pacing stats only on GenP5 and P7 adapters. But while
parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This
caused a trace when KASAN is enabled.
BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re]
Write of size 8 at addr ffff8885942a6340 by task modprobe/4809
Fixes: 8b6573ff34 ("bnxt_re: Update the debug counters for doorbell pacing")
Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Older adapters doesn't support the MAX CQ WQEs reported by older FW. So
restrict the value reported to 1M always for older adapters.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1728373302-19530-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Abhishek Mohapatra<abhishek.mohapatra@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This kselftest update for Linux 6.12-rc3 consists of several fixes
for build, run-time errors, and reporting errors:
-- ftrace: regression test for a kernel crash when running function graph
tracing and then enabling function profiler.
-- rseq: fix for mm_cid test failure.
-- vDSO:
- fixes to reporting skip and other error conditions.
- changes unconditionally build chacha and getrandom tests on
all architectures to make it easier for them to run in CIs.
- build error when sched.h to bring in CLONE_NEWTIME define.
-----BEGIN PGP SIGNATURE-----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=1etd
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
-----BEGIN PGP SIGNATURE-----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=ot6P
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Skip kunit tests when arm64+ACPI doesn't populate root node
of: Fix unbalanced of node refcount and memory leaks
dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
dt-bindings: display: elgin,jg10309-01: Add own binding
This fix solves this error, when calling kselftest with targets
"drivers/net":
File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__
if e.errno == errno.ENOSPC:
NameError: name 'errno' is not defined
The error was found by running tests manually with the command:
make kselftest TARGETS="drivers/net"
The module errno makes available standard error system symbols.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MII driver isn't used by brcmstb Ethernet drivers. Remove it
from the BCMASP, GENET, and SYSTEMPORT drivers.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241010191332.1074642-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fix solves this error, when calling kselftest with targets "net/rds":
The error was found by running tests manually with the command:
make kselftest TARGETS="net/rds"
The patch also specifies to import ip() function from the utils module.
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd3 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix external BO's dma-resv usage in exec IOCTL using bookkeep slots
rather than write slots. This leaves syncing to user space rather than
the KMD blindly enforcing write semantics on every external BO.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Kenneth Graunke <kenneth.w.graunke@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2673
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911152622.903058-1-matthew.brost@intel.com
- switch fbdev drivers back to struct platform_driver::remove()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZwmOgAAKCRD3ErUQojoP
X2GzAQC63kftiby6Zfwe2v56ZiYhF4pHBVTiShdrHtZx/XQe/AD6AmGc5GQFDVXX
9AwHMc2O9Ii7XN/3TJIB1gGYMj9WTgY=
=jf8/
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev platform driver fix from Helge Deller:
"Switch fbdev drivers back to struct platform_driver::remove()
Now that 'remove()' has been converted to the sane new API, there's
no reason for the 'remove_new()' use, so this converts back to the
traditional and simpler name.
See commits
5c5a7680e6 ("platform: Provide a remove callback that returns no value")
0edb555a65 ("platform: Make platform_driver::remove() return void")
for background to this all"
* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Switch back to struct platform_driver::remove()
Parthiban Veerasooran says:
====================
microchip_t1s: Update on Microchip 10BASE-T1S PHY driver
This patch series contain the below updates:
- Restructured lan865x_write_cfg_params() and lan865x_read_cfg_params()
functions arguments to more generic.
- Updated new/improved initial settings of LAN865X Rev.B0 from latest
AN1760.
- Added support for LAN865X Rev.B1 from latest AN1760.
- Moved LAN867X reset handling to a new function for flexibility.
- Added support for LAN867X Rev.C1/C2 from latest AN1699.
- Disabled/enabled collision detection based on PLCA setting.
====================
Link: https://patch.msgid.link/20241010082205.221493-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per LAN8650/1 Rev.B0/B1 AN1760 (Revision F (DS60001760G - June 2024))
and LAN8670/1/2 Rev.C1/C2 AN1699 (Revision E (DS60001699F - June 2024)),
under normal operation, the device should be operated in PLCA mode.
Disabling collision detection is recommended to allow the device to
operate in noisy environments or when reflections and other inherent
transmission line distortion cause poor signal quality. Collision
detection must be re-enabled if the device is configured to operate in
CSMA/CD mode.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-8-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move LAN867X reset handling code to a new function called
lan867x_check_reset_complete() which will be useful for the next patch
which also uses the same code to handle the reset functionality.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-5-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restructure lan865x_write_cfg_params() and lan865x_read_cfg_params()
functions arguments to more generic which will be useful for the next
patch which updates the improved initial configuration for LAN8650/1
Rev.B0 published in the Configuration Note.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b3ea416419 ("testing: net-drv: add basic shaper test")
removed the trailing backslash from the last entry. We have
a terminating comment here to avoid having to modify the last
line when adding at the end.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241010211857.2193076-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A fragile micro optimization in xe_sched_add_pending_job relied on both
the GPU scheduler being stopped and fence signaling stopped to safely
add a job to the pending list without the job list lock in
xe_sched_add_pending_job. Remove this optimization and just take the job
list lock.
Fixes: 7ddb9403dd ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003001657.3517883-2-matthew.brost@intel.com
When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC
on LS1028A, it was found that if the command was re-run multiple times,
Rx could not receive the frames, and the result of xdp-bench showed
that the rx rate was 0.
root@ls1028ardb:~# ./xdp-bench tx eno0
Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc)
Summary 2046 rx/s 0 err,drop/s
Summary 0 rx/s 0 err,drop/s
Summary 0 rx/s 0 err,drop/s
Summary 0 rx/s 0 err,drop/s
By observing the Rx PIR and CIR registers, CIR is always 0x7FF and
PIR is always 0x7FE, which means that the Rx ring is full and can no
longer accommodate other Rx frames. Therefore, the problem is caused
by the Rx BD ring not being cleaned up.
Further analysis of the code revealed that the Rx BD ring will only
be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met.
Therefore, some debug logs were added to the driver and the current
values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx
BD ring was full. The logs are as follows.
[ 178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140
[ 178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110
[ 178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110
From the results, the max value of xdp_tx_in_flight has reached 2140.
However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight
did not drop to 0 after enetc_stop() is called and the driver does not
clear it. The root cause is that NAPI is disabled too aggressively,
without having waited for the pending XDP_TX frames to be transmitted,
and their buffers recycled, so that xdp_tx_in_flight cannot naturally
drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent
XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight,
hence the manifestation of the bug.
One option would be to cover this extra condition in enetc_free_tx_ring(),
but now that the ENETC_TX_DOWN exists, we have created a window at
the beginning of enetc_stop() where NAPI can still be scheduled, but
any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs()
and enetc_disable_tx_bdrs() can be called with NAPI still scheduled,
and it is guaranteed that this will not wait indefinitely, but instead
give us an indication that the pending TX frames have orderly dropped
to zero. Only then should we call napi_disable().
This way, enetc_free_tx_ring() becomes entirely redundant and can be
dropped as part of subsequent cleanup.
The change also refactors enetc_start() so that it looks like the
mirror opposite procedure of enetc_stop().
Fixes: ff58fda090 ("net: enetc: prioritize ability to go down over packet processing")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Tx BD rings are disabled first in enetc_stop() and the driver
waits for them to become empty. This operation is not safe while
the ring is actively transmitting frames, and will cause the ring
to not be empty and hardware exception. As described in the NETC
block guide, software should only disable an active Tx ring after
all pending ring entries have been consumed (i.e. when PI = CI).
Disabling a transmit ring that is actively processing BDs risks
a HW-SW race hazard whereby a hardware resource becomes assigned
to work on one or more ring entries only to have those entries be
removed due to the ring becoming disabled.
When testing XDP_REDIRECT feautre, although all frames were blocked
from being put into Tx rings during ring reconfiguration, the similar
warning log was still encountered:
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear
The reason is that when there are still unsent frames in the Tx ring,
disabling the Tx ring causes the remaining frames to be unable to be
sent out. And the Tx ring cannot be restored, which means that even
if the xdp program is uninstalled, the Tx frames cannot be sent out
anymore. Therefore, correct the operation order in enect_start() and
enect_stop().
Fixes: ff58fda090 ("net: enetc: prioritize ability to go down over packet processing")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When testing the XDP_REDIRECT function on the LS1028A platform, we
found a very reproducible issue that the Tx frames can no longer be
sent out even if XDP_REDIRECT is turned off. Specifically, if there
is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on,
the console may display some warnings like "timeout for tx ring #6
clear", and all redirected frames will be dropped, the detailed log
is as follows.
root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2
Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc)
[203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear
[204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
[204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear
eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s
xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg
eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s
xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg
By analyzing the XDP_REDIRECT implementation of enetc driver, the
driver will reconfigure Tx and Rx BD rings when a bpf program is
installed or uninstalled, but there is no mechanisms to block the
redirected frames when enetc driver reconfigures rings. Similarly,
XDP_TX verdicts on received frames can also lead to frames being
enqueued in the Tx rings. Because XDP ignores the state set by the
netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to
suppress transmission of XDP frames.
Fixes: c33bfaf91c ("net: enetc: set up XDP program under enetc_reconfigure()")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xdp_drops statistic indicates the number of XDP frames dropped in
the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and
XDP_REDIRECT actions. If frame loss occurs in these two actions, the
frames loss count should not be included in xdp_drops, because there
are already xdp_tx_drops and xdp_redirect_failures to count the frame
loss of these two actions, so it's better to remove xdp_drops statistic
from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action.
Fixes: 7ed2bc8007 ("net: enetc: add support for XDP_TX")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241010092056.298128-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
netdevsim: better ipsec output format
The first 2 patches improve the netdevsim ipsec debug output with better
format. The 3rd patch update the selftests.
v2: update rtnetlink selftest with new output format (Stanislav Fomichev, Jakub Kicinski)
====================
Link: https://patch.msgid.link/20241010040027.21440-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da8 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The err value in mv88e6xxx_region_atu_snapshot is now potentially
uninitialised on return. Initialise err as 0.
Fixes: ada5c3229b ("net: dsa: mv88e6xxx: Add FID map cache")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241009212319.1045176-1-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When port mirroring is added to a port, the bit position of the source
port, needs to be written to the register ANA_AC_PROBE_PORT_CFG. This
register is replicated for n_ports > 32, and therefore we need to derive
the correct register from the port number.
Before this patch, we wrongly calculate the register from portno /
BITS_PER_BYTE, where the divisor ought to be 32, causing any port >=8 to
be written to the wrong register. We fix this, by using do_div(), where
the dividend is the register, the remainder is the bit position and the
divisor is now 32.
Fixes: 4e50d72b3b ("net: sparx5: add port mirroring implementation")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-mirroring-fix-v1-1-9ec962301989@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
-----BEGIN PGP SIGNATURE-----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=o9yV
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: Use devm_clk api to manage clock source
gpio: aspeed: Add the flush write to ensure the write complete.
Radhey Shyam Pandey says:
====================
net: xilinx: emaclite: Adopt clock support
This patchset adds emaclite clock support. AXI Ethernet Lite IP can also
be used on SoC platforms like Zynq UltraScale+ MPSoC which combines
powerful processing system (PS) and user-programmable logic (PL) into
the same device. On these platforms it is mandatory to explicitly enable
IP clocks for proper functionality.
====================
Link: https://patch.msgid.link/1728491303-1456171-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adapt to use the clock framework. Add s_axi_aclk clock from the processor
bus clock domain and make clk optional to keep DTB backward compatibility.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1728491303-1456171-4-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use device managed ethernet device allocation to simplify the error
handling logic. No functional change.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1728491303-1456171-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add s_axi_aclk AXI4 clock support. Traditionally this IP was used on
microblaze platforms which had fixed clocks enabled all the time. But
since its a PL IP, it can also be used on SoC platforms like Zynq
UltraScale+ MPSoC which combines processing system (PS) and user
programmable logic (PL) into the same device. On these platforms instead
of fixed enabled clocks it is mandatory to explicitly enable IP clocks
for proper functionality.
So make clock a required property and also define max supported clock
constraints.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1728491303-1456171-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Localio Bugfixes:
* Remove duplicated include in localio.c
* Fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
* Fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
* Fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
* Fix program selection loop in svc_process_common
* Fix integer overflow in decode_rc_list()
* Prevent NULL-pointer dereference in nfs42_complete_copies()
* Fix CB_RECALL performance issues when using a large number of delegations
-----BEGIN PGP SIGNATURE-----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=QBvR
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Localio Bugfixes:
- remove duplicated include in localio.c
- fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
- fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
- fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
- fix program selection loop in svc_process_common
- fix integer overflow in decode_rc_list()
- prevent NULL-pointer dereference in nfs42_complete_copies()
- fix CB_RECALL performance issues when using a large number of
delegations"
* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: remove revoked delegation from server's delegation list
nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
SUNRPC: Fix integer overflow in decode_rc_list()
sunrpc: fix prog selection loop in svc_process_common
nfs: Remove duplicated include in localio.c
After commit 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), blackhole_netdev was introduced to invalidate
dst cache entries on the TX path whenever the cache times out or is
flushed.
When two UDP sockets (sk1 and sk2) send messages to the same destination
simultaneously, they are using the same dst cache. If the dst cache is
invalidated on one path (sk2) while the other (sk1) is still transmitting,
sk1 may try to use the invalid dst entry.
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb()
ip_output()
<--- dst timeout or flushed
dst_dev_put()
ip_finish_output2()
ip_neigh_for_gw()
This results in a scenario where ip_neigh_for_gw() returns -EINVAL because
blackhole_dev lacks an in_dev, which is needed to initialize the neigh in
arp_constructor(). This error is then propagated back to userspace,
breaking the UDP application.
The patch fixes this issue by assigning an in_dev to blackhole_dev for
IPv4, similar to what was done for IPv6 in commit e5f80fcf86 ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the
dst entry is invalidated with blackhole_dev, it will not fail to create
the neigh entry.
As devinet_init() is called ealier than blackhole_netdev_init() in system
booting, it can not assign the in_dev to blackhole_dev in devinet_init().
As Paolo suggested, add a separate late_initcall() in devinet.c to ensure
inet_blackhole_dev_init() is called after blackhole_netdev_init().
Fixes: 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/3000792d45ca44e16c785ebe2b092e610e5b3df1.1728499633.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After we made sure no fib_seq_read() handlers needs RTNL anymore,
we can remove RTNL from fib_seq_sum().
Note that after RTNL was dropped, fib_seq_sum() result was possibly
outdated anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mr_call_vif_notifiers() and mr_call_mfc_notifiers() already
uses WRITE_ONCE() on the write side.
Using RTNL to protect the reads seems a big hammer.
Constify 'struct net' argument of ip6mr_rules_seq_read()
and ipmr_rules_seq_read().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib6_tables_seq_read() and
fib6_rules_seq_read().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib4_rules_seq_read()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
