The likely() annotation in l3mdev_master_ifindex_by_index() has been
found to be incorrect 100% of the time in real-world workloads (e.g.,
web servers).
Annotated branches shows the following in these servers:
correct incorrect % Function File Line
0 169053813 100 l3mdev_master_ifindex_by_index l3mdev.h 81
This is happening because l3mdev_master_ifindex_by_index() is called
from __inet_check_established(), which calls
l3mdev_master_ifindex_by_index() passing the socked bounded interface.
l3mdev_master_ifindex_by_index(net, sk->sk_bound_dev_if);
Since most sockets are not going to be bound to a network device,
the likely() is giving the wrong assumption.
Remove the likely() annotation to ensure more accurate branch
prediction.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241008163205.3939629-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>:
Fix casting warnings and other cleanups:
- Use ioread32be instead of readl
- Use iowrite32be instead of writel
Merge series from Dragan Simic <dsimic@manjaro.org>:
This is a small series that introduces dev_warn_probe() function, which
produces warnings on failed resource acquisitions, and improves error
handling in the probe paths of Rockchip SPI drivers, by using functions
dev_err_probe() and dev_warn_probe() properly in multiple places.
This series also performs a bunch of small, rather trivial code cleanups,
to make the code neater and a bit easier to read.
Merge series from Binbin Zhou <zhoubinbin@loongson.cn>:
This patch set is mainly about Loongson i2s related issues.
Please allow me to briefly explain this patch set:
Patch 1-2: Add ES8323 codec required on Loongson-2K2000
Patch 3-4: Add uda1342 codec required on Loongson-2K1000
Patch 5: Fix the problem of unable to detect codec under FDT system.
Patch 6-7: Add Loongson i2s platform device support
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
When the audio started we print out here and there the Input and Output or only
the Input audio format for the module that is in path of the stream.
This is mostly OK but provides inconsistent an - in my opinion - hard to grasp
information.
The series reworks how the input/output format is selected and tries to improve
the consistency of the prints by applying universal rules:
- Module is not changing the format or it has only input or output and it has
single format on in and out side
Audio format for gain.1.1:
- Module is not changing the format or it has only input or output and it has
multiple formats on either in or out side
Audio format (in/out format index: 2/0) for host-copier.0.playback:
- Module is changing format then we print the input and output ones
- Input if it has single format
Input audio format for host-copier.0.capture:
- Input has multiple formats
Input audio format (format index: 0) for host-copier.0.playback:
Similar versions for the output format prints.
Wei Wang from Realsil contributed this driver in 2011.
The following reasons lead to the removal:
- This driver generates maintenance workload
- Did not find minimal documentation on the web.
- No blog entries about anyone using the rts5208 and rts5288 during the
last years.
- Did not find any device that may has it in and is still available on
the market.
Link: https://lore.kernel.org/linux-staging/2024100943-shank-washed-a765@gregkh/T/#t
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20241009193250.6211-1-philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Fixes: f886497212 ("ipv4: fix dst race in sk_dst_get()")
Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241008143110.1064899-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vhYn
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-i2c-watchdog-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, I2C and Watchdog due for the v6.13 merge window
Stephen reports a documentation build warning for "make htmldocs"
introduced by recent commit 6b34562f0c ("crypto: akcipher - Drop
sign/verify operations").
The commit renamed a paragraph title in a header file, but neglected to
amend the title reference in the API documentation. Fix it.
Fixes: 6b34562f0c ("crypto: akcipher - Drop sign/verify operations")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241008172926.0b995ea7@canb.auug.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit e2d60e2f59 ("crypto: x86/cast5 - drop CTR mode implementation")
removed the calls to cast5_ctr_16way but left the avx implementation.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The previous patch removed the ENOENT warning at the point of
allocation, but the overall self-test warning is still there.
Fix all of them by returning zero as the test result. This is
safe because if the algorithm has gone away, then it cannot be
marked as tested.
Fixes: 4eded6d14f ("crypto: testmgr - Hide ENOENT errors")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As algorithm testing is carried out without holding the main crypto
lock, it is always possible for the algorithm to go away during the
test.
So before crypto_alg_tested updates the status of the tested alg,
it checks whether it's still on the list of all algorithms. This
is inaccurate because it may be off the main list but still on the
list of algorithms to be removed.
Updating the algorithm status is safe per se as the larval still
holds a reference to it. However, killing spawns of other algorithms
that are of lower priority is clearly a deficiency as it adds
unnecessary churn.
Fix the test by checking whether the algorithm is dead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the entry for the ahci_platform driver (LIBATA SATA
AHCI PLATFORM devices support) in the MAINTAINERS file to remove Jens
as maintainer. Also remove all references to Jens block tree from the
various LIBATA driver entries as the tree reference for these is defined
by the LIBATA SUBSYSTEM entry.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20241010020117.416333-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Add cmu_peric1 for USI, I2C and I3C clocks respectively.
Add cmu_misc for MISC, GIC and OTP clocks respectively.
Add cmu_hsi0 for PCIE clocks respectively.
Add cmu_hsi1 for USB and MMC clocks respectively.
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Link: https://lore.kernel.org/r/20241009042110.2379903-4-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Register compatible and cmu_info data to support clocks.
CMU_PERIC1, this provides clocks for USI09 ~ USI17, USI_I2C and USI_I3C.
CMU_MISC, this provides clocks for MISC, GIC and OTP.
CMU_HSI0, this provides clocks for PCIE.
CMU_HSI1, this provides clocks for USB and MMC.
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Link: https://lore.kernel.org/r/20241009042110.2379903-3-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add missing sentinel in of_device_id table, so the code iterating over
it will not go over the size of an array.
-----BEGIN PGP SIGNATURE-----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=a8tT
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-fixes-6.12' into next/clk
Samsung clock controller fixes for v6.12
Add missing sentinel in of_device_id table, so the code iterating over
it will not go over the size of an array.
Further code depends on the fixes branch.
Add peric1, misc and hsi0/1 clock definitions.
- CMU_PERIC1 for USI, IC2 and I3C
- CMU_MISC for MISC, GIC and OTP
- HSI0 for PCIE
- HSI1 for USB and MMC
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241009042110.2379903-2-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions
with IBPB, no software-based untraining of returns is needed anymore.
Currently, this change affects retbleed and SRSO mitigations so if
either of the mitigations is doing IBPB and the other one does the
software sequence, the latter is not needed anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
Document the "rc-feedback" trigger which is used to control LEDs by
remote control device activity. This is an existing trigger used in
existing DTs, document it so validation of those DTs would pass.
It was originally introduced into the Linux kernel in 2013 with
commit 153a60bb0f ("[media] rc: add feedback led trigger for rc keypresses")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241007205315.2477060-1-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
entry_ibpb() is designed to follow Intel's IBPB specification regardless
of CPU. This includes invalidating RSB entries.
Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the
RET untraining in the VMEXIT path will take care of all BTB and RSB
clearing so there's no need to explicitly fill the RSB anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
AMD's initial implementation of IBPB did not clear the return address
predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address
predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].
Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID,
when determining cross-vendor capabilities.
Suggested-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Jeff Layton <jlayton@kernel.org> says:
The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around 1
per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide when to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What we need is a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in inode->i_ctime_nsec
as a flag that indicates whether the current timestamps have been
queried via stat() or the like. When it's set, we allow the kernel to
use a fine-grained timestamp iff it's necessary to make the ctime show
a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible for a
file being changed to get a fine-grained timestamp. A file that is
altered just a bit later can then get a coarse-grained one that appears
older than the earlier fine-grained time. This violates timestamp
ordering guarantees.
To remedy this, keep a global monotonic atomic64_t value that acts as a
timestamp floor. When we go to stamp a file, we first get the latter of
the current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it with
that value.
If it has been queried, then first see whether the current coarse time
is later than the existing ctime. If it is, then we accept that value.
If it isn't, then we get a fine-grained time and try to swap that into
the global floor. Whether that succeeds or fails, we take the resulting
floor time, convert it to realtime and try to swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails, since
either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same floor
value as multigrain filesystems).
* patches from https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org:
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
Link: https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
tmpfs only requires the FS_MGTIME flag.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-12-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Beyond enabling the FS_MGTIME flag, this patch eliminates
update_time_for_write, which goes to great pains to avoid in-memory
stores. Just have it overwrite the timestamps unconditionally.
Note that this also drops the IS_I_VERSION check and unconditionally
bumps the change attribute, since SB_I_VERSION is always set on btrfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-11-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
For ext4, we only need to enable the FS_MGTIME flag.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-10-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Also, anytime the mtime changes, the ctime must also change, and those
are now the only two options for xfs_trans_ichgtime. Have that function
unconditionally bump the ctime, and ASSERT that XFS_ICHGTIME_CHG is
always set.
Finally, stop setting STATX_CHANGE_COOKIE in getattr, since the ctime
should give us better semantics now.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-9-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a high-level document that describes how multigrain timestamps work,
rationale for them, and some info about implementation and tradeoffs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-8-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
New percpu counters for counting various stats around multigrain
timestamp events, and a new debugfs file for displaying them when
CONFIG_DEBUG_FS is enabled:
- number of attempted ctime updates
- number of successful i_ctime_nsec swaps
- number of fine-grained timestamp fetches
- number of floor value swap events
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-7-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add some tracepoints around various multigrain timestamp events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-6-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
An update to the inode ctime typically requires the latest clock
value possible. The exception to this rule is when there is a nfsd write
delegation and the server is proxying timestamps from the client.
When nfsd gets a CB_GETATTR response, update the timestamp value in the
inode to the values that the client is tracking. The client doesn't send
a ctime value (since that's always determined by the exported
filesystem), but it can send a mtime value. In the case where it does,
update the ctime to a value commensurate with that instead of the
current time.
If ATTR_DELEG is set, then use ia_ctime value instead of setting the
timestamp to the current time.
With the addition of delegated timestamps, the server may receive a
request to update only the atime, which doesn't involve a ctime update.
Trust the ATTR_CTIME flag in the update and only update the ctime when
it's set.
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-5-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The mgtime_floor value is a global variable for tracking the latest
fine-grained timestamp handed out. Because it's a global, track the
number of times that a new floor value is assigned.
Add a new percpu counter to the timekeeping code to track the number of
floor swap events that have occurred. A later patch will add a debugfs
file to display this counter alongside other stats involving multigrain
timestamps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Link: https://lore.kernel.org/all/20241002-mgtime-v10-2-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Multigrain timestamps allow the kernel to use fine-grained timestamps when
an inode's attributes is being actively observed via ->getattr(). With
this support, it's possible for a file to get a fine-grained timestamp, and
another modified after it to get a coarse-grained stamp that is earlier
than the fine-grained time. If this happens then the files can appear to
have been modified in reverse order, which breaks VFS ordering guarantees
[1].
To prevent this, maintain a floor value for multigrain timestamps.
Whenever a fine-grained timestamp is handed out, record it, and when later
coarse-grained stamps are handed out, ensure they are not earlier than that
value. If the coarse-grained timestamp is earlier than the fine-grained
floor, return the floor value instead.
Add a static singleton atomic64_t into timekeeper.c that is used to keep
track of the latest fine-grained time ever handed out. This is tracked as a
monotonic ktime_t value to ensure that it isn't affected by clock
jumps. Because it is updated at different times than the rest of the
timekeeper object, the floor value is managed independently of the
timekeeper via a cmpxchg() operation, and sits on its own cacheline.
Add two new public interfaces:
- ktime_get_coarse_real_ts64_mg() fills a timespec64 with the later of the
coarse-grained clock and the floor time
- ktime_get_real_ts64_mg() gets the fine-grained clock value, and tries
to swap it into the floor. A timespec64 is filled with the result.
The floor value is global and updated via a single try_cmpxchg(). If
that fails then the operation raced with a concurrent update. Any
concurrent update must be later than the existing floor value, so any
racing tasks can accept any resulting floor value without retrying.
[1]: POSIX requires that files be stamped with realtime clock values, and
makes no provision for dealing with backward clock jumps. If a backward
realtime clock jump occurs, then files can appear to have been modified
in reverse order.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241002-mgtime-v10-1-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Technically the or_reset() means we call the action on failure, however
that would lead to unbalanced rpm put(). Move the get() earlier to fix
this. It should be extremely unlikely to ever trigger this in practice.
Fixes: 452bca0edb ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-4-matthew.auld@intel.com
Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.
There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.
v2 (Matt B):
- Prefer warning if we detect double fini()
Fixes: 0a382f9bc5 ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
With the Silicon revision being taken directly from socinfo, there's no
longer any need for reading any SOC register for revision from this driver.
Hence, we do not require any rev_offset for AM62 family of devices.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The AM625 syscon for efuse was being taken earlier from the wkup_conf node
where the entire wkup_conf was marked as "syscon". This is wrong and will
be fixed in the devicetree. However, whenever that does happen will end up
breaking this driver for that device because of the change in efuse offset.
Hence, to avoid breaking any sort of backward compatibility of devicetrees
use a quirk to distinguish and accordingly use 0x0 offset for the new
syscon node.
Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Kuniyuki Iwashima says:
====================
ipv4: Namespacify IPv4 address hash table.
This is a prep of per-net RTNL conversion for RTM_(NEW|DEL|SET)ADDR.
Currently, each IPv4 address is linked to the global hash table, and
this needs to be protected by another global lock or namespacified to
support per-net RTNL.
Adding a global lock will cause deadlock in the rtnetlink path and GC,
rtnetlink check_lifetime
|- rtnl_net_lock(net) |- acquire the global lock
|- acquire the global lock |- check ifa's netns
`- put ifa into hash table `- rtnl_net_lock(net)
so we need to namespacify the hash table.
The IPv6 one is already namespacified, let's follow that.
v2: https://lore.kernel.org/netdev/20241004195958.64396-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20241001024837.96425-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241008172906.1326-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
