No one uses inet_addr_lst anymore, so let's remove it.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each IPv4 address could have a lifetime, which is useful for DHCP,
and GC is periodically executed as check_lifetime_work.
check_lifetime() does the actual GC under RTNL.
1. Acquire RTNL
2. Iterate inet_addr_lst
3. Remove IPv4 address if expired
4. Release RTNL
Namespacifying the GC is required for per-netns RTNL, but using the
per-netns hash table will shorten the time on the hash bucket iteration
under RTNL.
Let's add per-netns GC work and use the per-netns hash table.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now, all IPv4 addresses are put in the per-netns hash table.
Let's use it in inet_lookup_ifaddr_rcu().
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a prep for per-netns RTNL conversion, we want to namespacify
the IPv4 address hash table and the GC work.
Let's allocate the per-netns IPv4 address hash table to
net->ipv4.inet_addr_lst and link IPv4 addresses into it.
The actual users will be converted later.
Note that the IPv6 address hash table is already namespacified.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-10-08 (ice, iavf, igb, e1000e, e1000)
This series contains updates to ice, iavf, igb, e1000e, and e1000
drivers.
For ice:
Wojciech adds support for ethtool reset.
Paul adds support for hardware based VF mailbox limits for E830 devices.
Jake adjusts to a common iterator in ice_vc_cfg_qs_msg() and moves
storing of max_frame and rx_buf_len from VSI struct to the ring
structure.
Hongbo Li uses assign_bit() to replace an open-coded instance.
Markus Elfring adjusts a couple of PTP error paths to use a common,
shared exit point.
Yue Haibing removes unused declarations.
For iavf:
Yue Haibing removes unused declarations.
For igb:
Yue Haibing removes unused declarations.
For e1000e:
Takamitsu Iwai removes unneccessary writel() calls.
Joe Damato adds support for netdev-genl support to query IRQ, NAPI,
and queue information.
For e1000:
Joe Damato adds support for netdev-genl support to query IRQ, NAPI,
and queue information.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000: Link NAPI instances to queues and IRQs
e1000e: Link NAPI instances to queues and IRQs
e1000e: Remove duplicated writel() in e1000_configure_tx/rx()
igb: Cleanup unused declarations
iavf: Remove unused declarations
ice: Cleanup unused declarations
ice: Use common error handling code in two functions
ice: Make use of assign_bit() API
ice: store max_frame and rx_buf_len only in ice_rx_ring
ice: consistently use q_idx in ice_vc_cfg_qs_msg()
ice: add E830 HW VF mailbox message limit support
ice: Implement ethtool reset support
====================
Link: https://patch.msgid.link/20241008233441.928802-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-10-08 (ice, i40e, igb, e1000e)
This series contains updates to ice, i40e, igb, and e1000e drivers.
For ice:
Marcin allows driver to load, into safe mode, when DDP package is
missing or corrupted and adjusts the netif_is_ice() check to
account for when the device is in safe mode. He also fixes an
out-of-bounds issue when MSI-X are increased for VFs.
Wojciech clears FDB entries on reset to match the hardware state.
For i40e:
Aleksandr adds locking around MACVLAN filters to prevent memory leaks
due to concurrency issues.
For igb:
Mohamed Khalfella adds a check to not attempt to bring up an already
running interface on non-fatal PCIe errors.
For e1000e:
Vitaly changes board type for I219 to more closely match the hardware
and stop PHY issues.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: change I219 (19) devices to ADP
igb: Do not bring the device up after non-fatal error
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
ice: Fix increasing MSI-X on VF
ice: Flush FDB entries before reset
ice: Fix netif_is_ice() in Safe Mode
ice: Fix entering Safe Mode
====================
Link: https://patch.msgid.link/20241008230050.928245-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several files have "accept*" misspelled as "accpet*" in the comments.
Fix all such occurrences.
Signed-off-by: Alexander Zubkov <green@qrator.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008162756.22618-2-green@qrator.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SFQ has an assumption on dealing with packets smaller than 64KB.
Even before BIG TCP, TCA_STAB can provide arbitrary big values
in qdisc_pkt_len(skb)
It is time to switch (struct sfq_slot)->allot to a 32bit field.
sizeof(struct sfq_slot) is now 64 bytes, giving better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241008111603.653140-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 38aa3f5ac6 ("integrity: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct evm_ima_xattr_data_hdr` and
`struct ima_digest_data_hdr`. We want to ensure that when new members
need to be added to the flexible structures, they are always included
within these tagged structs.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The EVM_NEW_FILE flag is unset if the file already existed at the time
of open and this can be checked without looking at i_writecount.
Not accessing it reduces traffic on the cacheline during parallel open
of the same file and drop the evm_file_release routine from second place
to bottom of the profile.
Fixes: 75a323e604 ("evm: Make it independent from 'integrity' LSM")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Function ima_eventdigest_init() calls ima_eventdigest_init_common()
with HASH_ALGO__LAST which is then used to access the array
hash_digest_size[] leading to buffer overrun. Have a conditional
statement to handle this.
Fixes: 9fab303a2c ("ima: fix violation measurement list record")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Tested-by: Enrico Bravi (PhD at polito.it) <enrico.bravi@huawei.com>
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add DW QoS Eth v4/v5 ip payload error statistics, and rename descriptor
bit macro because v4/v5 descriptor IPCE bit claims ip checksum
error or TCP/UDP/ICMP segment length error.
Here is bit description from DW QoS Eth data book(Part 19.6.2.2)
bit7 IPCE: IP Payload Error
When this bit is programmed, it indicates either of the following:
1).The 16-bit IP payload checksum (that is, the TCP, UDP, or ICMP
checksum) calculated by the MAC does not match the corresponding
checksum field in the received segment.
2).The TCP, UDP, or ICMP segment length does not match the payload
length value in the IP Header field.
3).The TCP, UDP, or ICMP segment length is less than minimum allowed
segment length for TCP, UDP, or ICMP.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://patch.msgid.link/20241008111443.81467-1-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: misc. fixes involving fallback to TCP
- Patch 1: better handle DSS corruptions from a bugged peer: reducing
warnings, doing a fallback or a reset depending on the subflow state.
For >= v5.7.
- Patch 2: fix DSS corruption due to large pmtu xmit, where MPTCP was
not taken into account. For >= v5.6.
- Patch 3: fallback when MPTCP opts are dropped after the first data
packet, instead of resetting the connection. For >= v5.6.
- Patch 4: restrict the removal of a subflow to other closing states, a
better fix, for a recent one. For >= v5.10.
====================
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-0-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
Fixes: 58e1b66b4e ("mptcp: pm: do not remove already closed subflows")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// 3WHS is OK
+0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey>
+0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]>
+0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]>
+0 accept(3, ..., ...) = 4
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
+0.1 read(4, ..., 500) = 500
+0 write(4, ..., 100) = 100
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Fixes: dea2b1ea9c ("mptcp: do not reset MP_CAPABLE subflow on mapping errors")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/518 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#name-fallback [2]
Link: https://github.com/multipath-tcp/packetdrill [3]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/519 [4]
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-3-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A warning is triggered when there is insufficient space in the buffer
for userdata. However, this is not an issue since userdata will be sent
in the next iteration.
Current warning message:
------------[ cut here ]------------
WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0
? write_ext_msg+0x3b6/0x3d0
console_flush_all+0x1e9/0x330
The code incorrectly issues a warning when this_chunk is zero, which is
a valid scenario. The warning should only be triggered when this_chunk
is negative.
Fixes: 1ec9daf950 ("net: netconsole: append userdata to fragmented netconsole messages")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008094325.896208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of a tc mirred action from one switch to another, the behavior
is not correct. We simply tell the source switch driver to program a
mirroring entry towards mirror->to_local_port = to_dp->index, but it is
not even guaranteed that the to_dp belongs to the same switch as dp.
For proper cross-chip support, we would need to go through the
cross-chip notifier layer in switch.c, program the entry on cascade
ports, and introduce new, explicit API for cross-chip mirroring, given
that intermediary switches should have introspection into the DSA tags
passed through the cascade port (and not just program a port mirror on
the entire cascade port). None of that exists today.
Reject what is not implemented so that user space is not misled into
thinking it works.
Fixes: f50f212749 ("net: dsa: Add plumbing for port mirroring")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241008094320.3340980-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on
these platforms fec_ptp_init() is not called and the related members
in fep are not initialized. However, fec_ptp_save_state() is called
unconditionally, which causes the kernel to panic. Therefore, add a
condition so that fec_ptp_save_state() is not called if PTP is not
supported.
Fixes: a1477dc87d ("net: fec: Restart PPS after link state change")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/353e41fe-6bb4-4ee9-9980-2da2a9c1c508@roeck-us.net/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241008061153.1977930-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 2384d02520 ("net/ipv6: Add anycast addresses to a global hashtable")
added inet6_acaddr_hash(), using ipv6_addr_hash() and net_hash_mix()
to get hash spreading for typical users.
However ipv6_addr_hash() is highly predictable and a malicious user
could abuse a specific hash bucket.
Switch to __ipv6_addr_jhash(). We could use a dedicated
secret, or reuse net_hash_mix() as I did in this patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008121307.800040-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 3f27fb2321 ("ipv6: addrconf: add per netns perturbation
in inet6_addr_hash()"), I added net_hash_mix() in inet6_addr_hash()
to get better hash dispersion, at a time all netns were sharing the
hash table.
Since then, commit 21a216a8fc ("ipv6/addrconf: allocate a per
netns hash table") made the hash table per netns.
We could remove the net_hash_mix() from inet6_addr_hash(), but
there is still an issue with ipv6_addr_hash().
It is highly predictable and a malicious user can easily create
thousands of IPv6 addresses all stored in the same hash bucket.
Switch to __ipv6_addr_jhash(). We could use a dedicated
secret, or reuse net_hash_mix() as I did in this patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008120101.734521-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix typo in EGRESS_RATE_METER_EN_MASK mask definition. This bus in not
introducing any user visible problem since, even if we are setting
EGRESS_RATE_METER_EN_MASK bit in REG_EGRESS_RATE_METER_CFG register,
egress QoS metering is not supported yet since we are missing some other
hw configurations (e.g token bucket rate, token bucket size).
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-airoha-fixes-v2-1-18af63ec19bf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's done in probe so it should be undone here.
Fixes: 1d3bb99648 ("Device tree aware EMAC driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20241008233050.9422-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent change in the venus driver results in a stuck clock on the
Lenovo ThinkPad X13s, for example, when streaming video in firefox:
video_cc_mvs0_clk status stuck at 'off'
WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c
...
Call trace:
clk_branch_wait+0x144/0x15c
clk_branch2_enable+0x30/0x40
clk_core_enable+0xd8/0x29c
clk_enable+0x2c/0x4c
vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core]
coreid_power_v4+0x464/0x628 [venus_core]
vdec_start_streaming+0xc4/0x510 [venus_dec]
vb2_start_streaming+0x6c/0x180 [videobuf2_common]
vb2_core_streamon+0x120/0x1dc [videobuf2_common]
vb2_streamon+0x1c/0x6c [videobuf2_v4l2]
v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem]
v4l_streamon+0x24/0x30 [videodev]
using the out-of-tree sm8350/sc8280xp venus support. [1]
Update also the sm8350/sc8280xp GDSC definitions so that the hw control
mode can be changed at runtime as the venus driver now requires.
Fixes: ec9a652e51 ("venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6")
Link: https://lore.kernel.org/lkml/20230731-topic-8280_venus-v1-0-8c8bbe1983a5@linaro.org/ # [1]
Cc: Jagadeesh Kona <quic_jkona@quicinc.com>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20240901093024.18841-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
cn23xx_dump_pf_initialized_regs() was added in 2016's commit
72c0091293 ("liquidio: CN23XX device init and sriov config")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009003841.254853-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is racy issue between smb2 session log off and smb2 session setup.
It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece
count to session struct not to free session while it is being used.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25282
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Existing code calls connect() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
In file included from cgroup_ancestor.c:3:
cgroup_ancestor.c: In function 'send_datagram':
cgroup_ancestor.c:38:38: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types]
38 | if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) {
| ^~~~~
| |
| struct sockaddr_in6 *
./test_progs.h:343:29: note: in definition of macro 'ASSERT_OK'
343 | long long ___res = (res); \
| ^~~
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17:
.../sys/socket.h:386:19: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in6 *'
386 | int connect (int, const struct sockaddr *, socklen_t);
| ^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This only compiles because of a glibc extension allowing declaration of the
argument as a "transparent union" which includes both types above.
Explicitly cast the argument to allow compiling for both musl and glibc.
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Fixes: f957c230e1 ("selftests/bpf: convert test_skb_cgroup_id_user to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008231232.634047-1-tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04 ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When CONFIG_CFI_CLANG is enabled, the number of prologue instructions
skipped by tailcall needs to include the kcfi instruction, otherwise the
TCC will be initialized every tailcall is called, which may result in
infinite tailcalls.
Fixes: e63985ecd2 ("bpf, riscv64/cfi: Support kCFI + BPF on riscv64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20241008124544.171161-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously when retrieving `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint, the `name_len` field was not populated by the
kernel, leaving it to reflect the value initially set by the user. This
behavior was inconsistent with how other input/output string buffer
fields function (e.g. `raw_tracepoint.tp_name_len`).
This patch fills `name_len` with the actual size of the string name.
Fixes: 1b715e1b0e ("bpf: Support ->fill_link_info for perf_event")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-1-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kzmalloc call in bpf_check can fail when memory is very fragmented,
which in turn can lead to an OOM kill.
Use kvzmalloc to fall back to vmalloc when memory is too fragmented to
allocate an order 3 sized bpf verifier environment.
Admittedly this is not a very common case, and only happens on systems
where memory has already been squeezed close to the limit, but this does
not seem like much of a hot path, and it's a simple enough fix.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241008170735.16766766@imladris.surriel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stefan Wahren says:
====================
qca_spi: Improvements to QCA7000 sync
This series contains patches which improve the QCA7000 sync behavior.
====================
Link: https://patch.msgid.link/20241007113312.38728-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 92717c2356 ("net: qca_spi: Avoid high load if QCA7000 is not
available") fixed the high load in case the QCA7000 is not available
but introduced sync delays for some corner cases like buffer errors.
So add the reset requests to the atomics flags, which are polled by
the SPI thread. As a result reset requests and sync state are now
separated. This has the nice benefit to make the code easier to
understand.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241007113312.38728-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After a reset of the QCA7000, the amount of available write buffer
space should match QCASPI_HW_BUF_LEN. If this is not the case
this error should be counted as such.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241007113312.38728-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 783237e8da ("net-tcp: Fast Open client - sending SYN-data")
introduces tcp_connect_queue_skb() and it would overwrite tcp->write_seq,
so it is no need to update tp->write_seq before invoking
tcp_connect_queue_skb().
Signed-off-by: xin.guo <guoxin0309@gmail.com>
Link: https://patch.msgid.link/1728289544-4611-1-git-send-email-guoxin0309@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add error handling from calling fixed_phy_register.
It may return some error, therefore, need to check the status.
And fixed_phy_register needs to bind a device node for mdio.
Add the mac device node for fixed_phy_register function.
This is a reference to this function, of_phy_register_fixed_link().
Fixes: e24a6c8746 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20241007032435.787892-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The older firmware of 8852A and 8852B can't receive packets via
CPU IO function and will lead to WoWLAN fail if calling it.
So use firmware feature to distinguish.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241004065408.10261-1-pkshih@realtek.com
To parsing firmware report correctly, driver need to re-order the report
index to match with different chips and different Wi-Fi firmware version.
Use wrong index to parse the report will lead the coexistence run into
wrong mechanism.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241003105140.10867-5-pkshih@realtek.com
Some Bluetooth device will make up connection as PAN link, though the
connection is idle, it will still report the PAN link is active. The
coexistence mechanism will enable TDMA to protect the PAN, it makes
Wi-Fi throughput degrade at least 50%. But the link is idle, don't
need so much bandwidth. Add TDMA case to let Wi-Fi can do traffic 80%
bandwidth.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241003105140.10867-4-pkshih@realtek.com
Reorder Bluetooth firmware related event index, it should be the same
with Wi-Fi firmware definition. To fix coexistence can not recognize
Bluetooth PAN(Personal area network) profile correctly, modified the
related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241003105140.10867-3-pkshih@realtek.com
The doc pages under /networking/net_cachelines are unreadable because
they lack .rst formatting for the tabular text.
Add simple table markup and tidy up the table contents:
- remove dashes that represent empty cells because they render
as bullets and are not needed
- replace 'struct_*' with 'struct *' in the first column so that
sphinx can render links for any structs that appear in the docs
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008165329.45647-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update coexistence priority setting for Wi-Fi scanning channel, the new
setting will allow Wi-Fi do RX while Bluetooth audio is not busy. Forced
to set new TDMA policy while RF calibration request come, to make sure
the calibration can do well, and switch to normal setting while the
calibration is done. Remove the code that no longer use.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241003105140.10867-2-pkshih@realtek.com
Guillaume Nault says:
====================
ipv4: Convert __fib_validate_source() and its callers to dscp_t.
This patch series continues to prepare users of ->flowi4_tos to a
future conversion of this field (__u8 to dscp_t). This time, we convert
__fib_validate_source() and its call chain.
The objective is to eventually make all users of ->flowi4_tos use a
dscp_t value. Making ->flowi4_tos a dscp_t field will help avoiding
regressions where ECN bits are erroneously interpreted as DSCP bits.
====================
Link: https://patch.msgid.link/cover.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to __fib_validate_source(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Only fib_validate_source() actually calls __fib_validate_source().
Since it already has a dscp_t variable to pass as parameter, we only
need to remove the inet_dscp_to_dsfield() conversion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/8206b0a64a21a208ed94774e261a251c8d7bc251.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to fib_validate_source(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
All callers of fib_validate_source() already have a dscp_t variable to
pass as parameter. We just need to remove the inet_dscp_to_dsfield()
conversions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/08612a4519bc5a3578bb493fbaad82437ebb73dc.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_mc_validate_source(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_mc_validate_source() to consider are:
* ip_route_input_mc() which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* udp_v4_early_demux() which gets the DSCP directly from the IPv4
header and can simply use the ip4h_dscp() helper.
Also, stop including net/inet_dscp.h in udp.c as we don't use any of
its declarations anymore.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c91b2cca04718b7ee6cf5b9c1d5b40507d65a8d4.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
