Cache original PTP GPIO requests instead of saving each parameter in
internal structures for periodic output or external timestamp request.
Factor out all periodic output register writes from ice_ptp_cfg_clkout
to a separate function to improve readability.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of having separate PTP GPIO implementation for E810T, use
existing one from all other products.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support of PTP SDPs (Software Definable Pins) for E825C products.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a new internal structure describing PTP pins.
Use the new structure for all non-E810T products.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When nvme passthru is configured using loop target, the clear_ids
attribute is, by default, set to true. This attribute would ensure that
EUID/NGUID/UUID is cleared for the loop passthru target.
The newer NVMe disk supporting the NVMe spec 1.3 or higher, typically,
implements the support for "Namespace Identification Descriptor list"
command. This command when issued from host returns EUID/NGUID/UUID
assigned to the inquired namespace. Not clearing these values, while
using nvme passthru using loop target, would result in NVMe host driver
rejecting the namespace. This check was implemented in the commit
2079f41ec6 ("nvme: check that EUI/GUID/UUID are globally unique").
The fix implemented in this commit ensure that when host issues ns-id
descriptor list command, the EUID/NGUID/UUID are cleared by passthru
target. In fact, the function nvmet_passthru_override_id_descs() which
clears those unique ids already exits, so we just need to ensure that
ns-id descriptor list command falls through the corretc code path. And
while we're at it, we also combines the three passthru admin command
cases together which shares the same code.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: 230d42d422 ("spi: Add s3c64xx SPI Controller driver")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Disable ratelimiting for btrfs_printk when CONFIG_BTRFS_DEBUG is
enabled. This allows for more verbose output which is often needed by
functions like btrfs_dump_space_info().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During an incremental send we may end up sending an invalid clone
operation, for the last extent of a file which ends at an unaligned offset
that matches the final i_size of the file in the send snapshot, in case
the file had its initial size (the size in the parent snapshot) decreased
in the send snapshot. In this case the destination will fail to apply the
clone operation because its end offset is not sector size aligned and it
ends before the current size of the file.
Sending the truncate operation always happens when we finish processing an
inode, after we process all its extents (and xattrs, names, etc). So fix
this by ensuring the file has a valid size before we send a clone
operation for an unaligned extent that ends at the final i_size of the
file. The size we truncate to matches the start offset of the clone range
but it could be any value between that start offset and the final size of
the file since the clone operation will expand the i_size if the current
size is smaller than the end offset. The start offset of the range was
chosen because it's always sector size aligned and avoids a truncation
into the middle of a page, which results in dirtying the page due to
filling part of it with zeroes and then making the clone operation at the
receiver trigger IO.
The following test reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with a size of 256K + 5 bytes, having two extents, one
# with a size of 128K and another one with a size of 128K + 5 bytes.
last_ext_size=$((128 * 1024 + 5))
xfs_io -f -d -c "pwrite -S 0xab -b 128K 0 128K" \
-c "pwrite -S 0xcd -b $last_ext_size 128K $last_ext_size" \
$MNT/foo
# Another file which we will later clone foo into, but initially with
# a larger size than foo.
xfs_io -f -c "pwrite -S 0xef 0 1M" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap1
# Now resize bar and clone foo into it.
xfs_io -c "truncate 0" \
-c "reflink $MNT/foo" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap2
rm -f /tmp/send-full /tmp/send-inc
btrfs send -f /tmp/send-full $MNT/snap1
btrfs send -p $MNT/snap1 -f /tmp/send-inc $MNT/snap2
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/send-full $MNT
btrfs receive -f /tmp/send-inc $MNT
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to bar: Invalid argument
A test case for fstests will be sent soon.
Reported-by: Ben Millwood <thebenmachine@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJhrHS2z+WViO2h=ojYvBPDLsATwLbg+7JaNCyYomv0fUxEpQQ@mail.gmail.com/
Fixes: 46a6e10a1a ("btrfs: send: allow cloning non-aligned extent if it ends at i_size")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running checkpatch.pl against a patch that modifies the
btrfs_qgroup_extent event class, it complained about using a comma instead
of a semicolon:
$ ./scripts/checkpatch.pl qgroups/0003-btrfs-qgroups-remove-bytenr-field-from-struct-btrfs_.patch
WARNING: Possible comma where semicolon could be used
#215: FILE: include/trace/events/btrfs.h:1720:
+ __entry->bytenr = bytenr,
__entry->num_bytes = rec->num_bytes;
total: 0 errors, 1 warnings, 184 lines checked
So replace the comma with a semicolon to silence checkpatch and possibly
other tools. It also makes the code consistent with the rest.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the inception of relocation we have maintained the backref cache
across transaction commits, updating the backref cache with the new
bytenr whenever we COWed blocks that were in the cache, and then
updating their bytenr once we detected a transaction id change.
This works as long as we're only ever modifying blocks, not changing the
structure of the tree.
However relocation does in fact change the structure of the tree. For
example, if we are relocating a data extent, we will look up all the
leaves that point to this data extent. We will then call
do_relocation() on each of these leaves, which will COW down to the leaf
and then update the file extent location.
But, a key feature of do_relocation() is the pending list. This is all
the pending nodes that we modified when we updated the file extent item.
We will then process all of these blocks via finish_pending_nodes, which
calls do_relocation() on all of the nodes that led up to that leaf.
The purpose of this is to make sure we don't break sharing unless we
absolutely have to. Consider the case that we have 3 snapshots that all
point to this leaf through the same nodes, the initial COW would have
created a whole new path. If we did this for all 3 snapshots we would
end up with 3x the number of nodes we had originally. To avoid this we
will cycle through each of the snapshots that point to each of these
nodes and update their pointers to point at the new nodes.
Once we update the pointer to the new node we will drop the node we
removed the link for and all of its children via btrfs_drop_subtree().
This is essentially just btrfs_drop_snapshot(), but for an arbitrary
point in the snapshot.
The problem with this is that we will never reflect this in the backref
cache. If we do this btrfs_drop_snapshot() for a node that is in the
backref tree, we will leave the node in the backref tree. This becomes
a problem when we change the transid, as now the backref cache has
entire subtrees that no longer exist, but exist as if they still are
pointed to by the same roots.
In the best case scenario you end up with "adding refs to an existing
tree ref" errors from insert_inline_extent_backref(), where we attempt
to link in nodes on roots that are no longer valid.
Worst case you will double free some random block and re-use it when
there's still references to the block.
This is extremely subtle, and the consequences are quite bad. There
isn't a way to make sure our backref cache is consistent between
transid's.
In order to fix this we need to simply evict the entire backref cache
anytime we cross transid's. This reduces performance in that we have to
rebuild this backref cache every time we change transid's, but fixes the
bug.
This has existed since relocation was added, and is a pretty critical
bug. There's a lot more cleanup that can be done now that this
functionality is going away, but this patch is as small as possible in
order to fix the problem and make it easy for us to backport it to all
the kernels it needs to be backported to.
Followup series will dismantle more of this code and simplify relocation
drastically to remove this functionality.
We have a reproducer that reproduced the corruption within a few minutes
of running. With this patch it survives several iterations/hours of
running the reproducer.
Fixes: 3fd0a5585e ("Btrfs: Metadata ENOSPC handling for balance")
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
NOCOW writes do not generate stripe_extent entries in the RAID stripe
tree, as the RAID stripe-tree feature initially was designed with a
zoned filesystem in mind and on a zoned filesystem, we do not allow NOCOW
writes. But the RAID stripe-tree feature is independent from the zoned
feature, so we must also do NOCOW writes for RAID stripe-tree filesystems.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only user (the mesa gallium driver) is already assuming explicit
synchronization and doing the export/import dance on shared BOs. The
only reason we were registering ourselves as writers on external BOs
is because Xe, which was the reference back when we developed Panthor,
was doing so. Turns out Xe was wrong, and we really want bookkeep on
all registered fences, so userspace can explicitly upgrade those to
read/write when needed.
Fixes: 4bdca11507 ("drm/panthor: Add the driver frontend block")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905070155.3254011-1-boris.brezillon@collabora.com
If deferred operations are pending, we want to wait for those to
land before declaring the queue blocked on a SYNC_WAIT. We need
this to deal with the case where the sync object is signalled through
a deferred SYNC_{ADD,SET} from the same queue. If we don't do that
and the group gets scheduled out before the deferred SYNC_{SET,ADD}
is executed, we'll end up with a timeout, because no external
SYNC_{SET,ADD} will make the scheduler reconsider the group for
execution.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905071914.3278599-1-boris.brezillon@collabora.com
drm_gpuvm_bo_obtain_prealloc() will call drm_gpuvm_bo_put() on our
pre-allocated BO if the <BO,VM> association exists. Given we
only have one ref on preallocated_vm_bo, drm_gpuvm_bo_destroy() will
be called immediately, and we have to hold the VM resv lock when
calling this function.
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913112722.492144-1-boris.brezillon@collabora.com
Since commit 641bb4394f ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags")
the FMODE_UNSIGNED_OFFSET flag has been moved to fop_flags and renamed,
but the patch failed to make the changes for the panthor driver.
When user space opens the render node the WARN() added by the patch
gets triggered.
Fixes: 641bb4394f ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920102802.2483367-1-liviu.dudau@arm.com
Improve readability of kvfree_rcu_queue_batch() function
in away that, after a first batch queuing, the loop is break
and success value is returned to a caller.
There is no reason to loop and check batches further as all
outstanding objects have already been picked and attached to
a certain batch to complete an offloading.
Fixes: 2b55d6a42d ("rcu/kvfree: Add kvfree_rcu_barrier() API")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/ZvWUt2oyXRsvJRNc@pc636/T/
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The fix implemented in commit 4ec10268ed ("mm, slab: unlink slabinfo,
sysfs and debugfs immediately") caused a subtle side effect due to which
while destroying the kmem cache, the code path would never get into
sysfs_slab_release() function even though SLAB_SUPPORTS_SYSFS is defined
and slab state is FULL. Due to this side effect, we would never release
kobject defined for kmem cache and leak the associated memory.
The issue here's with the use of __is_defined() macro in kmem_cache_
release(). The __is_defined() macro expands to __take_second_arg(
arg1_or_junk 1, 0). If "arg1_or_junk" is defined to 1 then it expands to
__take_second_arg(0, 1, 0) and returns 1. If "arg1_or_junk" is NOT defined
to any value then it expands to __take_second_arg(... 1, 0) and returns 0.
In this particular issue, SLAB_SUPPORTS_SYSFS is defined without any
associated value and that causes __is_defined(SLAB_SUPPORTS_SYSFS) to
always evaluate to 0 and hence it would never invoke sysfs_slab_release().
This patch helps fix this issue by defining SLAB_SUPPORTS_SYSFS to 1.
Fixes: 4ec10268ed ("mm, slab: unlink slabinfo, sysfs and debugfs immediately")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs9YCCcfmdxN43-9H3HnTYQsRtTYw1Kzq-L468GfLKAENA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Replace the pattern devm_reset_control_bulk_get_shared() /
reset_control_bulk_deassert() / devm_add_action_or_reset()
with devm_reset_control_bulk_get_shared_deasserted() for
some reduction in boilerplate.
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240925-reset-get-deasserted-v2-3-b3601bbd0458@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add devres helpers
- devm_reset_control_bulk_get_exclusive_deasserted
- devm_reset_control_bulk_get_optional_exclusive_deasserted
- devm_reset_control_bulk_get_optional_shared_deasserted
- devm_reset_control_bulk_get_shared_deasserted
- devm_reset_control_get_exclusive_deasserted
- devm_reset_control_get_optional_exclusive_deasserted
- devm_reset_control_get_optional_shared_deasserted
- devm_reset_control_get_shared_deasserted
to request and immediately deassert reset controls. During cleanup,
reset_control_assert() will be called automatically on the returned
reset controls.
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240925-reset-get-deasserted-v2-2-b3601bbd0458@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Introduce enum reset_control_flags and replace the list of boolean
parameters to the internal reset_control_get functions with a single
flags parameter, before adding more boolean options.
The separate boolean parameters have been shown to be error prone in
the past. See for example commit a57f68ddc8 ("reset: Fix devm bulk
optional exclusive control getter").
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240925-reset-get-deasserted-v2-1-b3601bbd0458@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The only real reason why we have the gen2 vs. gen3+ split
in irq handling is that bspec claims that IIR/IMR/IER/ISR
and EMR are only 16 bits on gen2, as opposed to being 32
bits on gen3+. That doesn't seem to be a meaningful
distinction as 32bit access to these registers works
perfectly fine on gen2
Interestingly the 16 msbs of IMR are in fact hardcoded
to 1 on gen2, which to me indicates that 32bit access
was the plan all along, and perhaps someone just forgot
to update the spec.
Nuke the special 16bit gen2 irq code and switch over to
the gen3 code.
Gen2 doesn't have the ASLE interrupt, which just needs
a small tweak in i915_irq_postinstall().
And so far we've not had a codepath that could enable the
legacy BLC interrupt on gen2. Now we do, but we'll never
actually do it since gen2 machines don't have OpRegion.
(and neither do i915/i945 machines btw). On these older
platforms the legacy BLC interrupt is meant to be used
in conjunction with the LBPC backlight stuff, but we
never actually switch off the legacy/combination mode
and thus don't use the interrupt either.
This was quickly smoke tested on all gen2 variants.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
For the "always on/unmasked" interrupts we initialize
dev_priv->irq_mask first, then enable_mask. Follow the
same order for the hotplug interrupt so that things are
a bit less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
i915_has_asle() is a bit of a mess. It does some kind of
partial check whether the platform has the legacy BLC
interrupt or not, and then it checks whether OpRegion
ASLE is present.
Let's split the legacy BLC interrupt check into its
own thing, and while at it let's make it accurate.
Currently it misses i85x (not a problem since gen2
never has OpRegion, nor do we currently call
i915_enable_asle_pipestat() on gen2), and it
doesn't reject ILK-M (not that anyone should call
this on ILK). The exlusion of VLV/CHV (where one
might even consider calling this, being gmch
platforms) only happens due to .is_mobile==false.
List the platforms that actually do have the legacy
BLC interrupt in a bit more explicit fashion.
i915gm/i945gm/i965gm/gm45 we can cover with a
display_ver+is_mobile check, pnv needs an exception
due to having a variant with is_mobile==false, and
i85x is the only relevant gen2 platform so easier to
handle on its own.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This test was added because of a bug in verifier.c:sync_linked_regs(),
upon range propagation it destroyed subreg_def marks for registers.
The test is written in a way to return an upper half of a register
that is affected by range propagation and must have it's subreg_def
preserved. This gives a return value of 0 and leads to undefined
return value if subreg_def mark is not preserved.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com
Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:
0: call bpf_ktime_get_ns call bpf_ktime_get_ns
1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff
2: w1 = w0 rewrites w1 = w0
3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r)
4: r1 >>= 32 r11 <<= 32 (r)
5: r0 = r1 r1 |= r11 (r)
6: exit; if w0 < 0xa goto pc+0
r1 >>= 32
r0 = r1
exit
(or zero extension of w1 at (2) is missing for architectures that
require zero extension for upper register half).
The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
value for hi32 bits of (2) (marked (r));
- this random value is read at (5).
Fixes: 75748837b7 ("bpf: Propagate scalar ranges through register assignments.")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/7e2aa30a62d740db182c170fdd8f81c596df280d.camel@gmail.com
Link: https://lore.kernel.org/bpf/20240924210844.1758441-1-eddyz87@gmail.com
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b5 ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f641500 ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that GFS2 and OCFS2 are signalling async ->lock() support with
FOP_ASYNC_LOCK and checks for support are converted, we can remove
EXPORT_OP_ASYNC_LOCK.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/0a114db814fec3086f937ae3d44a086f13b8de26.1726083391.git.bcodding@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Instead of checking just the exportfs flag, use the new
locks_can_async_lock() helper which allows NLM and NFSD to once again
support lock notifications for all filesystems which use posix_lock_file().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/865c40da44af67939e8eb560d17a26c9c50f23e0.1726083391.git.bcodding@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 4e7bca6fc0 ("i2c: i2c-stm32f7: add PM Runtime support")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Abstract away the nuts and bolts of the SPI vs. PCI ROM
stuff, and hide it all in soc/intel_rom.c so that the
VBT code doesn't have to care about this stuff.
This leaves intel_bios.c with a single codepath that
can focus on the details related to the VBT layout.
This should have no functional changes.
v2: Rebase due to vbt_signature changes
Drop unnecessary cast (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-7-ville.syrjala@linux.intel.com
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The SPI VBT codepath only knows how to read 4 bytes at a time.
So to read the 2 byte vbt_size it masks out the unwanted msbs.
Hide that little implementation detail inside a new intel_spi_read16()
helper. Alse rename the existing intel_spi_read() to intel_spi_read32()
to make it clear what it does.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-5-ville.syrjala@linux.intel.com
The SPI code rounds the VBT allocation to a multiple of four bytes
(presumably because it reads the VBT 4 bytes at a time). Do the
same for the PCI ROM side to eliminate pointless differences between
the two codepaths. This will make no functional difference.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923152453.11230-4-ville.syrjala@linux.intel.com
The sx150x driver uses a rbtree register cache with no obvious reason for
specifically preferring it. The maple tree register cache is based on a
more modern data structure and makes implementation decisions more suitable
for modern systems so let's switch the driver to use that. No functional
change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20240924-pinctl-sx150x-maple-v1-1-17dcfefefd17@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It has been a while since James had any significant bandwidth to
review KVM/arm64 patches. But in the meantime, Joey has stepped up
and did a really good job reviewing some terrifying patch series.
Having talked with the interested parties, it appears that James
is unlikely to have time for KVM in the near future, and that Joey
is willing to take more responsibilities.
So let's appoint Joey as an official reviewer, and give James some
breathing space, as well as my personal thanks. I'm sure he will
be back one way or another!
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240927104956.1223658-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
