Commit graph

1,323,830 commits

Author SHA1 Message Date
Julien Stephan
15b0801285 iio: adc: ad7380: add oversampling support
ad7380x(-4) parts are able to do oversampling to increase accuracy.

This chips supports a normal oversampling mode and a rolling mode and
also allows enabling and disabling extra resolution bits when
oversampling is enabled.

We have intentionally left out the rolling mode for now as there is not
a compelling use case for it. User can process a captured data buffer
to get the same effect.

We are also currently not supporting changing the oversampling mode
independently of the resolution bits. The resolution boost feature
can only be enabled when oversampling is enabled and oversampling is
not as useful without the resolution boost. So for now we consider the
features tightly coupled. When oversampling is enabled, the resolution
boost is enabled and when oversampling is disabled, the resolution
boost is disabled.

Since the resolution boost feature causes 16-bit chips to now have
18-bit data which means the storagebits has to change from 16 to 32
bits, we use the new ext_scan_type feature to allow changing the
scan_type at runtime based on if the resolution boost is enabled or
not.

SPI message optimization has to be moved since now some of the xfer
parameters change based on the resolution boost mode.

A few neighboring comments are also fixed up while we are touching this
code.

Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Co-developed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-5-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
99d46eecf9 iio: adc: ad7380: use spi_optimize_message()
This changes the AD7380 to use spi_optimize_message() to optimize
buffered reads.

This changes both direct reads and buffered reads to use the same
spi_message. This has some (welcome) side effects. The first is that
in buffered reads, the timestamp will now correspond to the same sample
rather than the previous sample. The second is that direct reads now
use the same SPI bus speed as buffered reads.

This reduces CPU usage of the IRQ thread from around 25% to around 20%
when sampling at 10 kHz on a ZedBoard.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-4-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
d8f2bb5084 iio: add support for multiple scan types per channel
This adds new fields to the iio_channel structure to support multiple
scan types per channel. This is useful for devices that support multiple
resolution modes or other modes that require different data formats of
the raw data.

To make use of this, drivers need to implement the new callback
get_current_scan_type() to resolve the scan type for a given channel
based on the current state of the driver. There is a new scan_type_ext
field in the iio_channel structure that should be used to store the
scan types for any channel that has more than one. There is also a new
flag has_ext_scan_type that acts as a type discriminator for the
scan_type/ext_scan_type union. A union is used so that we don't grow
the size of the iio_channel structure and also makes it clear that
scan_type and ext_scan_type are mutually exclusive.

The buffer code is the only code in the IIO core code that is using the
scan_type field. This patch updates the buffer code to use the new
iio_channel_validate_scan_type() function to ensure it is returning the
correct scan type for the current state of the device when reading the
sysfs attributes. The buffer validation code is also update to validate
any additional scan types that are set in the scan_type_ext field. Part
of that code is refactored to a new function to avoid duplication.

Some userspace tools may need to be updated to re-read the scan type
after writing any other attribute. During testing, we noticed that we
had to restart iiod to get it to re-read the scan type after enabling
oversampling on the ad7380 driver.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-3-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
7758562898 iio: buffer: use struct iio_scan_type to simplify code
By using struct iio_scan_type, we can simplify the code by removing
lots of duplicate pointer dereferences. This make the code a bit easier
to read.

This also prepares for a future where channels may have more than one
scan_type.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-2-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
fd7179ece0 iio: introduce struct iio_scan_type
This gives the channel scan_type a named type so that it can be used
to simplify code in later commits.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-1-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
Julien Stephan
737413da87 iio: adc: ad7380: add support for ad738x-4 4 channels variants
Add support for ad7380/1/2/3-4 parts which are 4 channels
variants from ad7380/1/2/3

Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-7-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
Julien Stephan
1a291cc8ee dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants
Add compatible support for ad7380/1/3/4-4 parts which are 4 channels
variants from ad7380/1/3/4

Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-6-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
Julien Stephan
baa781e1d8 iio: adc: ad7380: prepare for parts with more channels
The current driver supports only parts with 2 channels.
In order to prepare the support of new compatible ADCs with more
channels, this commit:
  - defines MAX_NUM_CHANNEL to specify the maximum number of
    channels currently supported by the driver
  - adds available_scan_mask member in ad7380_chip_info structure
  - fixes spi xfer struct len depending on number of channels
  - fixes scan_data.raw buffer size to handle more channels
  - adds a timing specifications structure in ad7380_chip_info structure

Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-5-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
2920b6ee6d iio: adc: ad7380: add support for pseudo-differential parts
Add support for AD7383, AD7384 pseudo-differential compatible parts.
Pseudo differential parts require common mode voltage supplies so add
the support for them and add the support of IIO_CHAN_INFO_OFFSET to
retrieve the offset

Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-4-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
6b2c80194e dt-bindings: iio: adc: ad7380: add pseudo-differential parts
Adding AD7383 and AD7384 compatible parts that are pseudo-differential.

Pseudo-differential require common mode voltage supplies, so add them
conditionally

Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-3-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
b095217c10 iio: adc: ad7380: new driver for AD7380 ADCs
This adds a new driver for the AD7380 family ADCs.

The driver currently implements basic support for the AD7380, AD7381,
2-channel differential ADCs. Support for additional single-ended,
pseudo-differential and 4-channel chips that use the same register map
as well as additional features of the chip will be added in future patches.

[Julien Stephan: fix rx/tx buffer for regmap access]
[Julien Stephan: fix scale issue]
[Julien Stephan: use the new iio_device_claim_direct_scoped
instead of iio_device_claim_direct_mode]

Co-developed-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
[Julien Stephan: add datasheet links of supported parts]
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-2-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:08 +01:00
David Lechner
c4ea781c20 dt-bindings: iio: adc: Add binding for AD7380 ADCs
This adds a binding specification for the Analog Devices Inc. AD7380
family of ADCs.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528-adding-new-ad738x-driver-v7-1-4cd70a4c12c8@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Nuno Sa
70a0e10f8a iio: adc: adi-axi-adc: make sure DRP is locked on enable
When enabling the core, make sure DRP (Dynamic Reconfiguration Port)
is locked. Most of the designs don't really use it but we still get the
lock bit set. So let's do it all the time so the code is generic.

While at it reduce the timeout time to 1 microsecond as it seems to be
enough and goes in line with what we have on the similar DAC core
(adi-axi-dac).

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240531-dev-axi-adc-drp-v3-2-e3fa79447c67@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Nuno Sa
202b89f4b7 iio: adc: adi-axi-adc: don't allow concurrent enable/disable calls
Add proper mutex guards as we should not be able to disable
the core in the middle of enabling it.

Note there's no need to rush in backporting this as the only user of the
backend does not do anything crazy..

Fixes: 794ef0e578 ("iio: adc: adi-axi-adc: move to backend framework")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240531-dev-axi-adc-drp-v3-1-e3fa79447c67@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Dr. David Alan Gilbert
9be46ec560 staging: iio: adt7316: remove unused struct 'adt7316_limit_regs'
'adt7316_limit_regs' has never been used since the original
commit 35f6b6b86e ("staging: iio: new ADT7316/7/8 and ADT7516/7/9
driver").

The comment above it is a copy-and-paste from a different struct.

Remove both the struct and the comment.

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240529160055.28489-1-linux@treblig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Antoniu Miclaus
e2261b4a4d iio: frequency: adrf6780: rm clk provider include
The driver has no clock provider implementation, therefore remove the
include.

Fixes: 63aaf6d06d ("iio: frequency: adrf6780: add support for ADRF6780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20240530092835.36892-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Denis Benato
5c3266385e iio: imu: bmi323: Use iio read_acpi_mount_matrix() helper
bmi150-accel and bmi323-imu are declared in an almost identical way in the ACPI and in some devices such as the Asus RC71L the "ROTM" property can be found: parse and use the ACPI-defined mount-matrix.

Co-developed-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Jonathan LoBue <jlobue10@gmail.com>
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://lore.kernel.org/r/20240523174736.16692-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
David Lechner
33c33a961b iio: adc: ad7944: remove unused parameter
In the ad7944 driver, the ad7944_convert_and_acquire() had an unused
`chan` parameter. This patch removes the parameter.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240524-iio-ad7944-remove-unused-parameter-v1-1-fd824d7122a0@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
David Lechner
28cf9cbe68 iio: adc: sort Makefile
The Makefile for IIO ADC drivers is intended to be sorted alphabetically.
I can be tricky to keep it sorted when adding new drivers when not all
of the existing drivers are sorted. So let's sort everything now to make
it easier to keep it sorted in the future.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240523192412.3220547-1-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Angelo Dureghello
c1db755b6a iio: dac: ad3552r: uniform structure names
Use same driver file name (ad3552r) for structure names used
for all variants.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-7-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Angelo Dureghello
d421302a91 iio: dac: ad3552r: change AD3552R_NUM_CH define name
After model data and num_hw_channles introduction, we have:

ad3552r_desc, num_ch: used to keep channel number set in fdt,
ad35xxr_model_data, num_hw_channels: for max channel checks,
AD3552R_NUM_CH: just actually used to define the max array size
on allocated arrays.

Renaming AD3552R_NUM_CH to a more consistent name, as AD3552R_MAX_CH.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-6-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Angelo Dureghello
ea1c94d785 iio: dac: ad3552r: add support for ad3541r and ad3551r
Add support for single-output DAC variants.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-5-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:07 +01:00
Angelo Dureghello
2334d5e0b7 iio: dac: ad3552r: add model data structure
Add a "model data" structure to keep useful hardware-related
information as from datasheet, avoiding id-based conditional
choices later on.

Removed id-based checks and filled model-specific structures
with device specific features, In particular, num_hw_channels
is introduced to keep the number of hardware implemented
channels, since 1-channel versions of the DACs are added
in this same patchset.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-4-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Angelo Dureghello
80ea200763 dt-bindings: iio: dac: add ad35xxr single output variants
Add support for ad3541r and ad3551r single output variants.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-3-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Angelo Dureghello
0fbce5d171 dt-bindings: iio: dac: fix ad3552r gain parameter names
The adi,gain-scaling-p/n values are an inverted log2,
so initial naming was set correctly, but the driver uses just
adi,gain-scaling-p/n, and if fdt is created accordingly with
the fdt bindings documentation, driver fails the probe.

Observing that:
- the Linux driver is the only consumer,
- there are no upstreamed dts nodes related to ad3552r,

the fix to the documentation side is preferred and less-risk.

Fixes: b0a96c5f59 ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522150141.1776196-2-adureghello@baylibre.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Nuno Sa
fefbc4a5d6 iio: adc: ad9467: change struct members padding
Using tabs and maintaining the start of the variables aligned is a pain and
may lead to lot's of unrelated changes when adding new members. Hence,
let's change things now and just have a simple space.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522-dev-ad9467-dma-v2-2-a37bec463632@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Nuno Sa
7a8e7f13f9 iio: adc: ad9467: use DMA safe buffer for spi
Make sure we use a DMA safe buffer (IIO_DMA_MINALIGN) for all the spi
transfers. Only relevant for writes since for reads
spi_write_then_read() is used which does not require DMA safe buffers.

Also note that for consistency, ad9467_spi_read() is also taking struct
ad9467_state as a parameter (even if not really needed).

Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240522-dev-ad9467-dma-v2-1-a37bec463632@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Barnabás Czémán
cba37c2e53 iio: light: stk3310: support more stk3311 variants
Add support for more stk3311 variants like stk3311-a
and stk3311-s34, they are register compatible but they
have different chip ids.

Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Link: https://lore.kernel.org/r/20240521-stk3311-v1-3-07a4966b355a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Barnabás Czémán
745712c7bb iio: light: stk3310: make chip id check expandable
Modify chip id check for support easier additions
for compatible variants.

Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Link: https://lore.kernel.org/r/20240521-stk3311-v1-2-07a4966b355a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Barnabás Czémán
709aeedcc7 iio: light: stk3310: relax failure to match id
Relax failure to match ID to a warning rather than probe fail.
This add abilty to use other compatible variants when chip id
is not defined in the driver.

Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Link: https://lore.kernel.org/r/20240521-stk3311-v1-1-07a4966b355a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Dr. David Alan Gilbert
4d8c7da08b iio: light: rohm-bu27034: remove unused struct 'bu27034_result'
'bu27034_result' is unused since the original
commit e52afbd610 ("iio: light: ROHM BU27034 Ambient Light Sensor").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240522230457.478156-4-linux@treblig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Dr. David Alan Gilbert
64741cb5ac iio: adc: pac1934: remove unused struct 'samp_rate_mapping'
'samp_rate_mapping' has been unused since the original
commit 0fb528c825 ("iio: adc: adding support for PAC193x").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240522230457.478156-3-linux@treblig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Dr. David Alan Gilbert
1568f94f29 iio: accel: bmi088: remove unused struct 'bmi088_scale_info'
'bmi088_scale_info' has been unused since the original
commit c19ae6be75 ("iio: accel: Add support for the Bosch-Sensortec
BMI088").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240522230457.478156-2-linux@treblig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Alisa-Dariana Roman
a4c514e5f0 iio: adc: ad7192: Add AD7194 support
Unlike the other AD719Xs, AD7194 has configurable channels. The user can
dynamically configure them in the devicetree.

Add sigma_delta_info member to chip_info structure. Since AD7194 is the
only chip that has no channel sequencer, num_slots should remain
undefined.

Also modify config AD7192 description for better scaling.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20240514120222.56488-7-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:06 +01:00
Alisa-Dariana Roman
caf7b7632b dt-bindings: iio: adc: ad7192: Add AD7194 support
Unlike the other AD719Xs, AD7194 has configurable channels. The user can
dynamically configure them in the devicetree.

Also add an example for AD7194 devicetree.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240514120222.56488-6-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:05 +01:00
Alisa-Dariana Roman
dd471a2b77 dt-bindings: iio: adc: Add single-channel property
Devices that have both single-ended channels and differential channels
cause a bit of confusion when the channels are configured in the
devicetree.

Clarify difference between these two types of channels for such devices
by adding single-channel property alongside diff-channels. They should
be mutually exclusive.

Devices that have only single-ended channels can still use reg property
to reference a channel like before.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240514120222.56488-5-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:05 +01:00
Alisa-Dariana Roman
2b12a52b29 iio: adc: ad7192: Add aincom supply
AINCOM should actually be a supply. AINx inputs are referenced to AINCOM
in pseudo-differential operation mode. AINCOM voltage represents the
offset of corresponding channels.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20240514120222.56488-4-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:05 +01:00
Alisa-Dariana Roman
ecec83a236 dt-bindings: iio: adc: ad7192: Add aincom supply
AINCOM should actually be a supply. AINx inputs are referenced to AINCOM
in pseudo-differential operation mode. AINCOM voltage represents the
offset of corresponding channels.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20240514120222.56488-3-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:05 +01:00
Alisa-Dariana Roman
f311151600 iio: adc: ad7192: Use standard attribute
Replace custom attribute filter_low_pass_3db_frequency_available with
standard attribute.

Store the available values in ad7192_state struct.

The function that used to compute those values replaced by
ad7192_update_filter_freq_avail().

Function ad7192_show_filter_avail() is no longer needed.

Note that the initial available values are hardcoded.

Also moved the mutex lock and unlock in order to protect the whole
switch statement since each branch modifies the state of the device.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20240514120222.56488-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-04 19:53:05 +01:00
Krzysztof Kozlowski
6ea810cfb8 clk: sifive: prci: fix module autoloading
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.  Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240604130531.170371-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-06-04 11:37:16 -07:00
Song Liu
61ce0ea759 selftests/bpf: Fix bpf_cookie and find_vma in nested VM
bpf_cookie and find_vma are flaky in nested VMs, which is used by some CI
systems. It turns out these failures are caused by unreliable perf event
in nested VM. Fix these by:

  1. Use PERF_COUNT_SW_CPU_CLOCK in find_vma;
  2. Increase sample_freq in bpf_cookie.

Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org
2024-06-04 11:17:54 -07:00
Jakub Kicinski
a6ba5125f1 Revert "ethernet: octeontx2: avoid linking objects into multiple modules"
This reverts commit 727c94c953.

Stephen reports that this commit causes a circular module dependency
for him. Revert, and we'll try to address the problem, again.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20240531152223.25591c8e@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-04 10:55:01 -07:00
Krzysztof Kozlowski
3a94fa4cb8 arm64: dts: microchip: sparx5_pcb135: move non-MMIO nodes out of axi
simple-bus nodes, so the "axi" node, should not have non-MMIO children
as pointed out by simple-bus schema dtbs_check:

  sparx5_pcb135_emmc.dtb: axi@600000000: sfp-eth60: {'compatible': ... should not be valid under {'type': 'object'}
    from schema $id: http://devicetree.org/schemas/simple-bus.yaml#

Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+PtL3HTKkA_gwTjb_i1mFZ+wW+qwin34HMYmwW7oNDFw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-04 18:53:22 +01:00
Krzysztof Kozlowski
fe7c551ea0 arm64: dts: microchip: sparx5_pcb134: move non-MMIO nodes out of axi
simple-bus nodes, so the "axi" node, should not have non-MMIO children
as pointed out by simple-bus schema dtbs_check:

  sparx5_pcb134.dtb: axi@600000000: i2c-mux-0: {'compatible': ... should not be valid under {'type': 'object'}
    from schema $id: http://devicetree.org/schemas/simple-bus.yaml#

Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+PtL3HTKkA_gwTjb_i1mFZ+wW+qwin34HMYmwW7oNDFw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-06-04 18:53:22 +01:00
Charles Keepax
4eecb644b8
spi: cs42l43: Correct SPI root clock speed
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.

Fixes: ef75e76716 ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-04 18:49:30 +01:00
Zhang Yi
b7c4098880
ASoC: codecs: ES8326: Solve headphone detection issue
When switching between OMTP and CTIA headset, we can hear pop noise.
To solve this issue, We modified the configuration for headphone detection

Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240604021946.2911-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-04 18:49:24 +01:00
Maciej Strozek
afe377286a
ASoC: cs42l43: Increase default type detect time and button delay
Some problematic headsets have been discovered, to help with correctly
identifying these, the detect time must be increased. Also improve the
reliability of the impedance value from the button detect by slightly
increasing the button detect delay.

Fixes: 686b8f711b ("ASoC: cs42l43: Lower default type detect time")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604132843.3309114-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-04 18:49:23 +01:00
Julien Panis
d9fef76e89 thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
Filtered mode is not supported on mt8188 SoC and is the source of bad
results. Move to immediate mode which provides good temperatures.

Fixes: f4745f546e ("thermal/drivers/mediatek/lvts_thermal: Add MT8188 support")
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240516-mtk-thermal-mt8188-mode-fix-v2-1-40a317442c62@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-06-04 19:40:51 +02:00
Linus Torvalds
32f88d65f0 linux_kselftest-fixes-6.10-rc3
This kselftest fixes update consists of fixes to build warnings
 in several tests and fixes to ftrace tests.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmZfMrAACgkQCwJExA0N
 QxwsSRAAjtg9M7RndlxEmHItQUEfk8pss/EuAmnDOVUHDIcSCfwu2SbO0RKad7Rl
 LtlTfpnuYXrqBYjtQBJtOtfbyU6gN3riPFglzzhIqmmlsz0M18u/wfgFLKy80BYu
 maJ75lPz0Pp7yBuZ6WuRSq8RzjwzdK0boDrYfQfCKiFWHDQreeVFFazhp2Qt4Jns
 KK2z5fD347nDdqWmfTfz/U21nBA+6p2VMjs8OkKjLKoI996GL1k3hY3K/vJSWQSE
 ASt9U+cdVJl346aL5riFtt1znav4KgxTEDRPxxJDHXDHPXt86hgu0WOD9kptiwZf
 Cxc8RXsEtrh3VxbGJ4jLVndeF9bqQHtk1ZBqJdUrxDrhlfZMCRYdsP47CRMvP8Tn
 KV+4FNoZXGVty+IO7xKiC2AMEAPK126lvhv53evvhLk3FW9hSJ2ftogQxrYAm3Hq
 EVe6IMn8i4TIIZWhhCoM42KxHMMxN7ewymjMJ++fQRFy8zf3qAjc5I/r99A2z86c
 0c2iaOjAUCs0i4EUaWHp+qh7HundmCCq3IuFMdxvrQj/ojZCXGFH5irdGDUh+tSB
 I6w+TWC4jnePFHo7cfZQG84po+NRrGV/qRNnMBHR9y0DaRCOiO5ps4O4VeZRGplx
 VLOpacU2si5sunI0g6dK7AnycQN+Ecw0P/F25eWXTUATtp4xN0s=
 =AsE4
 -----END PGP SIGNATURE-----

Merge tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to build warnings in several tests and fixes to ftrace tests"

* tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/futex: don't pass a const char* to asprintf(3)
  selftests/futex: don't redefine .PHONY targets (all, clean)
  selftests/tracing: Fix event filter test to retry up to 10 times
  selftests/futex: pass _GNU_SOURCE without a value to the compiler
  selftests/overlayfs: Fix build error on ppc64
  selftests/openat2: Fix build warnings on ppc64
  selftests: cachestat: Fix build warnings on ppc64
  tracing/selftests: Fix kprobe event name test for .isra. functions
  selftests/ftrace: Update required config
  selftests/ftrace: Fix to check required event file
  kselftest/alsa: Ensure _GNU_SOURCE is defined
2024-06-04 10:34:13 -07:00
Ard Biesheuvel
290be0a402 Merge branch 'efi/next' into efi/urgent 2024-06-04 19:31:03 +02:00