Commit graph

1,323,830 commits

Author SHA1 Message Date
Ville Syrjälä
31951bbe3e drm/i915: Document which platforms have which CRC registers
Sprinkle some comments around to indicate which CRC registers
are valid for which platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:47:50 +03:00
Ville Syrjälä
7bd7cfa833 drm/i915: Add a separate definition for PIPE_CRC_RES_HSW
On hsw+ we only have one CRC result register, instead of the
five we have on ivb, and some of the others have been repurposed
to serve other CRC related purposes.

Since the hsw+ vs. pre-hsw register operate quite differently
let's add a separate definition for the hsw+ variant to make the
situation a bit more clear. Also since we only use this from a
hsw+ codepath there is no real benefit to be had with reusing
the ivb register definition.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:59 +03:00
Ville Syrjälä
1ec6defe71 drm/i915: Regroup pipe CRC regs
Put all the definitions related to a single pipe CRC register
in one place, instead of the current approach where things are
spread all over the place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:43 +03:00
Ville Syrjälä
1c1bfd8b0b drm/i915: Switch PIPE_CRC_RES_*_IVB to _MMIO_PIPE()
PIPE_CRC_RES_*_IVB are proper pipe registers, and only valid
for IVB+ where pipe register blocks are equally spaced, so we
can switch from _MMIO_TRANS2() to the simpler _MMIO_PIPE() for
these.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:34 +03:00
Ville Syrjälä
ccb6ba9eba drm/i915: Extract intel_pipe_crc_regs.h
The CRC registers are a pretty self contained bunch.
Extract them to a separate header to declutter i915_reg.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:26 +03:00
Ville Syrjälä
8b329d74fb drm/i915/dsb: Use intel_color_uses_dsb()
Use intel_color_uses_dsb() instead of open coding it in
intel_vblank_evade_init(). Make the logic around DSB a bit
more isolated from the rest of the code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:56 +03:00
Ville Syrjälä
81d604f44b drm/i915/dsb: Pass DSB engine ID to intel_dsb_prepare()
Allow the caller of intel_dsb_prepare() to determine which DSB
engine (out of the three possible per pipe) to use. This will
let us utilize multiple DSB engines during the same commit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:34 +03:00
Ville Syrjälä
738f3d8618 drm/i915/dsb: Move DSB ID definition to the header
We're going to need to make the DSB ID visible outside the DSB
code, so that we eg. can use multiple DSB engines in parallel.
to that end move the definition to intel_dsb.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:23 +03:00
Ville Syrjälä
7f57f21510 drm/i915/dsb: Polish the DSB ID enum
Namespace the DSB ID enum properly, and make the naming match
other such enums in general. Also make the names 0 based as
that's what Bspec uses for DSB (unlike eg. planes where it
uses 1 based indexing).

We'll throw out INVALID_DSB while at it since we have no use for
it at the moment.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:13 +03:00
Jeff Johnson
dadc295cbd RAS/AMD/ATL: Add a missing module description
Add a missing module description.

  [ bp: Massage commit message. ]

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240604-md-ras-amd-atl-v1-1-d4eb3cf3abe4@quicinc.com
2024-06-05 11:31:48 +02:00
David S. Miller
fd70f0443e Merge branch 'devlink-const'
Christophe JAILLET says:

====================
devlink: Constify struct devlink_dpipe_table_ops

Patch 1 updates devl_dpipe_table_register() and struct
devlink_dpipe_table to accept "const struct devlink_dpipe_table_ops".

Then patch 2 updates the only user of this function.

This is compile tested only.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:24:58 +01:00
Christophe JAILLET
b072aa7899 mlxsw: spectrum_router: Constify struct devlink_dpipe_table_ops
'struct devlink_dpipe_table_ops' are not modified in this driver.

Constifying these structures moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig:
Before:
======
   text	   data	    bss	    dec	    hex	filename
  15557	    712	      0	  16269	   3f8d	drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
  15789	    488	      0	  16277	   3f95	drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:24:57 +01:00
Christophe JAILLET
82dc29b973 devlink: Constify the 'table_ops' parameter of devl_dpipe_table_register()
"struct devlink_dpipe_table_ops" only contains some function pointers.

Update "struct devlink_dpipe_table" and the 'table_ops' parameter of
devl_dpipe_table_register() so that structures in drivers can be
constified.

Constifying these structures will move some data to a read-only section, so
increase overall security.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:24:57 +01:00
Barry Song
310ec03841 dma-buf: align fd_flags and heap_flags with dma_heap_allocation_data
dma_heap_allocation_data defines the UAPI as follows:

 struct dma_heap_allocation_data {
 	__u64 len;
 	__u32 fd;
 	__u32 fd_flags;
 	__u64 heap_flags;
 };

However, dma_heap_buffer_alloc() casts both fd_flags and heap_flags
into unsigned int. We're inconsistent with types in the non UAPI
arguments. This patch fixes it.

Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605012605.5341-1-21cnbao@gmail.com
2024-06-05 14:52:15 +05:30
Daniel Golle
61578f6793 net: phy: aquantia: add support for PHY LEDs
Aquantia Ethernet PHYs got 3 LED output pins which are typically used
to indicate link status and activity.
Add a minimal LED controller driver supporting the most common uses
with the 'netdev' trigger as well as software-driven forced control of
the LEDs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rework indentation, fix checkpatch error and improve some functions ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:21:31 +01:00
Christian Marangi
c11d5dbbe7 net: phy: aquantia: move priv and hw stat to header
In preparation for LEDs support, move priv and hw stat to header to
reference priv struct also in other .c outside aquantia.main

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:21:31 +01:00
Dr. David Alan Gilbert
a23b0034e9 net: ethtool: remove unused struct 'cable_test_tdr_req_info'
'cable_test_tdr_req_info' is unused since the original
commit f2bc8ad31a ("net: ethtool: Allow PHY cable test TDR data to
configured").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:19:08 +01:00
Marek Vasut
f97e8c040e dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board
Add DT compatible string for DH electronics STM32MP13xx DHCOR SoM and
DHSBC carrier board. This stm32mp135f-dhcor-dhsbc board is a stack of
DHCOR SoM based on STM32MP135F SoC (900MHz / crypto capabilities)
populated on DHSBC carrier board.

The SoM contains the following peripherals:
- STPMIC (power delivery)
- 512MB DDR3L memory
- eMMC and SDIO WiFi module

The DHSBC carrier board contains the following peripherals:
- Two RGMII Ethernet ports
- USB-A Host port, USB-C peripheral port, USB-C power supply plug
- Expansion connector

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 11:19:03 +02:00
Dr. David Alan Gilbert
6f49c3fb56 net: caif: remove unused structs
'cfpktq' has been unused since
commit 73d6ac633c ("caif: code cleanup").

'caif_packet_funcs' is declared but never defined.

Remove both of them.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:18:06 +01:00
Jason Xing
61e2bbafb0 net: remove NULL-pointer net parameter in ip_metrics_convert
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:06:00 +01:00
Chen Hanxiao
cdbdb3c62a net: bridge: fix an inconsistent indentation
Smatch complains:
net/bridge/br_netlink_tunnel.c:
   318 br_process_vlan_tunnel_info() warn: inconsistent indenting

Fix it with a proper indenting

Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:04:47 +01:00
Tristram Ha
0a8d3f2e3e net: phy: Micrel KSZ8061: fix errata solution not taking effect problem
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata.  This worked in 5.0 kernel but not in newer kernels.  The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning.  This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.

Fixes: 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:03:15 +01:00
Linus Walleij
3374136f31 dt-bindings: dsa: Rewrite Vitesse VSC73xx in schema
This rewrites the Vitesse VSC73xx DSA switches DT binding in
schema.

It was a bit tricky since I needed to come up with some way
of applying the SPI properties only on SPI devices and not
platform devices, but I figured something out that works.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:01:34 +01:00
Sean Nyekjaer
f37c8d3ba5 ARM: dts: stm32: osd32: move pwr_regulators to common
According to the OSD32MP1 Power System overview[1] pwr_regulators;
vdd-supply and vdd_3v3_usbfs-supply are hard-wired internally in
the SIP module to vdd and ldo4.

[1]:
https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 10:46:34 +02:00
Sean Nyekjaer
7010a17fb1 ARM: dts: stm32: osd32: move usb phy power to common
According to the OSD32MP1 Power System overview[1] usb phy power is
hard-wired internally in the SIP module to ldo4.

[1]:
https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 10:46:34 +02:00
Tvrtko Ursulin
9c3951ec27
drm/v3d: Fix perfmon build error/warning
Move static const array into the source file to fix the "defined but not
used" errors.

The fix is perhaps not the prettiest due hand crafting the array sizes
in v3d_performance_counters.h, but I did add some build time asserts to
validate the counts look sensible, so hopefully it is good enough for a
quick fix.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 3cbcbe016c ("drm/v3d: Add Performance Counters descriptions for V3D 4.2 and 7.1")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405211137.hueFkLKG-lkp@intel.com/Cc: Maíra Canal <mcanal@igalia.com>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604160210.24073-1-tursulin@igalia.com
2024-06-05 10:44:51 +02:00
Wen Gu
fb0aa0781a net/smc: avoid overwriting when adjusting sock bufsizes
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.

And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].

Fixes: 30c3c4a449 ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 09:42:57 +01:00
Subbaraya Sundeep
8b0f741094 octeontx2-af: Always allocate PF entries from low prioriy zone
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.

Fixes: 7df5b4b260 ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 09:40:02 +01:00
Marek Vasut
4306c04741 ARM: dts: stm32: Add arm,no-tick-in-suspend to STM32MP15xx STGEN timer
STM32MP15xx RM0436 Rev 6 section 46.3 System timer generator (STGEN) states
"
Arm recommends that the system counter is in an always-on power domain.
This is not supported in the current implementation, therefore STGEN should
be saved and restored before Standby mode entry, and restored at Standby
exit by secure software.
...
"
Instead of piling up workarounds in the firmware which is difficult to
update, add "arm,no-tick-in-suspend" DT property into the timer node to
indicate the timer is stopped in suspend, and let the kernel fix the
timer up.

Fixes: 8471a20253 ("ARM: dts: stm32: add stm32mp157c initial support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 10:38:37 +02:00
Jan Kara
8832fc1e50 udf: Fix lock ordering in udf_evict_inode()
udf_evict_inode() calls udf_setsize() to truncate deleted inode.
However inode deletion through udf_evict_inode() can happen from inode
reclaim context and udf_setsize() grabs mapping->invalidate_lock which
isn't generally safe to acquire from fs reclaim context since we
allocate pages under mapping->invalidate_lock for example in a page
fault path.  This is however not a real deadlock possibility as by the
time udf_evict_inode() is called, nobody can be accessing the inode,
even less work with its page cache. So this is just a lockdep triggering
false positive. Fix the problem by moving mapping->invalidate_lock
locking outsize of udf_setsize() into udf_setattr() as grabbing
mapping->invalidate_lock from udf_evict_inode() is pointless.

Reported-by: syzbot+0333a6f4b88bcd68a62f@syzkaller.appspotmail.com
Fixes: b9a861fd52 ("udf: Protect truncate and file type conversion with invalidate_lock")
Signed-off-by: Jan Kara <jack@suse.cz>
2024-06-05 10:36:46 +02:00
Jan Kara
c1f1b25a60 udf: Drop pointless IS_IMMUTABLE and IS_APPEND check
udf_setsize() checks for IS_IMMUTABLE and IS_APPEND flags. This is
however pointless as UDF does not have capability to store these flags
and never allows to set them. Furthermore this is the only place in UDF
code that was actually checking these flags. Remove the pointless check.

Signed-off-by: Jan Kara <jack@suse.cz>
2024-06-05 10:36:46 +02:00
Jeff Johnson
03fceb8dbd isofs: add missing MODULE_DESCRIPTION()
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/isofs/isofs.o

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240526-md-fs-isofs-v1-1-60e2e36a3d46@quicinc.com>
2024-06-05 10:35:15 +02:00
Jeff Johnson
96544a93ed jbd2: add missing MODULE_DESCRIPTION()
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/jbd2/jbd2.o

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240526-md-fs-jbd2-v1-1-7bba6665327d@quicinc.com>
2024-06-05 10:35:04 +02:00
Yannick Fertre
3d058df954 ARM: dts: stm32: add goodix touchscreen on stm32mp135f-dk
Touchscreen reset needs to be configured
via the pinctrl not the driver (a pull-down resistor
has been soldered onto the reset line which forces
the touchscreen to reset state).
Interrupt line must have a pull-down resistor
in order to freeze the i2c address at 0x5D.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 10:35:00 +02:00
Alain Volmat
26c7b370eb ARM: dts: stm32: enable camera support on stm32mp135f-dk board
On STM32MP135F-DK board the camera support is made of the
CSI based GC2145 sensor, connected to the ST-MIPID02 CSI to parallel
bridge, connected to the DCMIPP parallel input.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 10:19:07 +02:00
Alain Volmat
0948424cd5 ARM: dts: stm32: add DCMIPP pinctrl on STM32MP13x SoC family
Adds DCMIPP pinctrl support and assigns dedicated GPIO pins.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 10:19:07 +02:00
Ard Biesheuvel
99280413a5 efi: Add missing __nocfi annotations to runtime wrappers
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.

Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.

Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.

Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.

Fixes: 1a4fec49ef ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-06-05 10:18:58 +02:00
Patrick Delaunay
9c8d852dab arm64: dts: st: add power domain on stm32mp25
Add power domains on STM32MP25x SoC for supported low power modes:
- CPU_PD0/1: domain for idle of each core Cortex A35 (CStop)
- CLUSTER_PD: D1 domain with Stop1 and LP-Stop1 modes support when
  the Cortex A35 cluster and each device assigned to CPU1=CA35
  are deactivated
- RET_PD: D1 domain retention (VDDCore is reduced) to support
          the LPLV-Stop1 mode

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 09:59:00 +02:00
Amir Goldstein
172e422ffe fsnotify: clear PARENT_WATCHED flags lazily
In some setups directories can have many (usually negative) dentries.
Hence __fsnotify_update_child_dentry_flags() function can take a
significant amount of time. Since the bulk of this function happens
under inode->i_lock this causes a significant contention on the lock
when we remove the watch from the directory as the
__fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask()
races with __fsnotify_update_child_dentry_flags() calls from
__fsnotify_parent() happening on children. This can lead upto softlockup
reports reported by users.

Fix the problem by calling fsnotify_update_children_dentry_flags() to
set PARENT_WATCHED flags only when parent starts watching children.

When parent stops watching children, clear false positive PARENT_WATCHED
flags lazily in __fsnotify_parent() for each accessed child.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2024-06-05 09:52:38 +02:00
Nirmoy Das
8b01f970ee drm/xe: Use missing lock in relay_needs_worker
Add missing lock that is protecting relay->incoming_actions.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603081723.18775-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
2024-06-05 09:52:13 +02:00
Magnus Karlsson
03e38d315f Revert "xsk: Document ability to redirect to any socket bound to the same umem"
This reverts commit 968595a936.

Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-3-magnus.karlsson@gmail.com
2024-06-05 09:43:05 +02:00
Magnus Karlsson
7fcf26b315 Revert "xsk: Support redirect to any socket bound to the same umem"
This reverts commit 2863d665ea.

This patch introduced a potential kernel crash when multiple napi instances
redirect to the same AF_XDP socket. By removing the queue_index check, it is
possible for multiple napi instances to access the Rx ring at the same time,
which will result in a corrupted ring state which can lead to a crash when
flushing the rings in __xsk_flush(). This can happen when the linked list of
sockets to flush gets corrupted by concurrent accesses. A quick and small fix
is not possible, so let us revert this for now.

Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-2-magnus.karlsson@gmail.com
2024-06-05 09:42:30 +02:00
Jiri Olsa
d0d1df8ba1 bpf: Set run context for rawtp test_run callback
syzbot reported crash when rawtp program executed through the
test_run interface calls bpf_get_attach_cookie helper or any
other helper that touches task->bpf_ctx pointer.

Setting the run context (task->bpf_ctx pointer) for test_run
callback.

Fixes: 7adfc6c9b3 ("bpf: Add bpf_get_attach_cookie() BPF helper to access bpf_cookie value")
Reported-by: syzbot+3ab78ff125b7979e45f9@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=3ab78ff125b7979e45f9
Link: https://lore.kernel.org/bpf/20240604150024.359247-1-jolsa@kernel.org
2024-06-05 09:41:33 +02:00
Valentin Caron
624aa659af arm64: dts: st: add usart6 on stm32mp257f-ev1 board
Add node for USART6 on stm32mp257f-ev1 board.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 09:33:42 +02:00
Valentin Caron
066cfdcd75 arm64: dts: st: add usart6 pinctrl used on stm32mp257f-ev1 board
Add pins for USART6 on GPIO connector on stm32mp257f-ev1 board.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 09:33:42 +02:00
Valentin Caron
c3aa0dccf0 arm64: dts: st: add usart nodes on stm32mp25
Update device-tree stm32mp251.dtsi to add some USART features.

Add u(s)art 1, 3, 4, 5, 6, 7, 8, 9 nodes and compatible, interrupts,
clocks, access-controllers properties.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-06-05 09:33:42 +02:00
Wei Yang
922306a253 mm/mm_init.c: move nr_initialised reset down a bit
We don't need to count nr_initialised in two cases:

* for low zones that are always populated
* after first_deferred_pfn is detected

Let's move the nr_initialised reset down a bit to reduce some comparison
of prev_end_pfn and end_pfn.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240525023040.13509-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
2024-06-05 10:28:10 +03:00
Wei Yang
93bbbcb1e7 mm/memblock: fix a typo in description of for_each_mem_region()
No functional change.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240525023040.13509-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
2024-06-05 10:28:10 +03:00
Wei Yang
3be381d11f mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
Just like what it does in "if (mirrored_kernelcore)", we should use
memblock_region_memory_base_pfn() to get the startpfn.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240525023040.13509-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
2024-06-05 10:28:10 +03:00
Wei Yang
b73f6b98bb mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
Leverage the macro PAGE_ALIGN_DOWN to get pgend.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-7-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
2024-06-05 10:22:22 +03:00