fwnode needs to be set for a device for fw_devlink to be able to
track/enforce its dependencies correctly. Without this, you'll see error
messages like this when the supplier has probed and tries to make sure
all its fwnode consumers are linked to it using device links:
tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 1-0008
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/20240910130019.35081-1-jonathanh@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241024061347.1771063-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fwnode needs to be set for a device for fw_devlink to be able to
track/enforce its dependencies correctly. Without this, you'll see error
messages like this when the supplier has probed and tries to make sure
all its fwnode consumers are linked to it using device links:
mediatek-drm-dp 1c500000.edp-tx: Failed to create device link (0x180) with backlight-lcd0
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Closes: https://lore.kernel.org/all/7b995947-4540-4b17-872e-e107adca4598@notapiano/
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241024061347.1771063-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In attempting to optimize fw_devlink runtime, I introduced numerous cycle
detection bugs by foregoing cycle detection logic under specific
conditions. Each fix has further narrowed the conditions for optimization.
It's time to give up on these optimization attempts and just run the cycle
detection logic every time fw_devlink tries to create a device link.
The specific bug report that triggered this fix involved a supplier fwnode
that never gets a device created for it. Instead, the supplier fwnode is
represented by the device that corresponds to an ancestor fwnode.
In this case, fw_devlink didn't do any cycle detection because the cycle
detection logic is only run when a device link is created between the
devices that correspond to the actual consumer and supplier fwnodes.
With this change, fw_devlink will run cycle detection logic even when
creating SYNC_STATE_ONLY proxy device links from a device that is an
ancestor of a consumer fwnode.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Closes: https://lore.kernel.org/all/1a1ab663-d068-40fb-8c94-f0715403d276@ideasonboard.com/
Fixes: 6442d79d88 ("driver core: fw_devlink: Improve detection of overlapping cycles")
Cc: stable <stable@kernel.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241030171009.1853340-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bin_attr_nvmem_write() must check the read_only flag and block
writes on read-only devices, now that a nvmem device can be switched
between read-write and read-only mode at runtime using the force_ro
attribute. Add the missing check.
Fixes: 9d7eb234ac ("nvmem: core: Implement force_ro sysfs attribute")
Cc: Stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20241030140253.40445-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc ("mm: avoid leaving partial pfn mappings around in
error case").
Cc: stable@vger.kernel.org
Fixes: ed9eccbe89 ("Staging: add comedi core")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20241017-comedi-tlb-v3-1-16b82f9372ce@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As preparation for the constification of struct bin_attribute,
constify the arguments of the read and write callbacks.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-10-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To make it possible to put struct bin_attribute into read-only memory,
the sysfs core has to stop passing mutable pointers to the read() and
write() callbacks.
As there are numerous implementors of these callbacks throughout the
tree it's not possible to change all of them at once.
To enable a step-by-step transition, add new variants of the read() and
write() callbacks which differ only in the constness of the struct
bin_attribute argument.
As most binary attributes are defined through macros, extend these
macros to transparently handle both variants of callbacks to minimize
the churn during the transition.
As soon as all handlers are switch to the const variant, the non-const
one can be removed together with the transition machinery.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-9-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The preparations for the upcoming constification of struct bin_attribute
requires some logic in the structure definition macros.
To avoid duplication of that logic in multiple macros, reimplement all
other macros in terms of __BIN_ATTR().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-8-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The llseek() callbacks should not modify the struct
bin_attribute passed as argument.
Enforce this by marking the argument as const.
As there are not many callback implementers perform this change
throughout the tree at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-7-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmap() callbacks should not modify the struct
bin_attribute passed as argument.
Enforce this by marking the argument as const.
As there are not many callback implementers perform this change
throughout the tree at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-6-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The is_bin_visible() callbacks should not modify the struct
bin_attribute passed as argument.
Enforce this by marking the argument as const.
As there are not many callback implementers perform this change
throughout the tree at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-5-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop abusing the is_bin_visible() callback to calculate the attribute
size. Instead use the new, dedicated bin_size() one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-4-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop abusing the is_bin_visible() callback to calculate the attribute
size. Instead use the new, dedicated bin_size() one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-3-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several drivers need to dynamically calculate the size of an binary
attribute. Currently this is done by assigning attr->size from the
is_bin_visible() callback.
This has drawbacks:
* It is not documented.
* A single attribute can be instantiated multiple times, overwriting the
shared size field.
* It prevents the structure to be moved to read-only memory.
Introduce a new dedicated callback to calculate the size of the
attribute.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-2-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upcoming changes to the sysfs core require the size of the created file
to be overridable by the caller.
Add a parameter to enable this.
For now keep using attr->size in all cases.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-1-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control()
Fixes: 170a6726d0 ("usb: typec: ucsi: add support for separate DP altmode devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/325102b3-eaa8-4918-a947-22aca1146586@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.
Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: William McVicker <willmcvicker@google.com>
Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@google.com
Fixes: 705e3ce37b ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241104-am62-lpm-usb-fix-v1-1-e93df73a4f0d@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are uninitialized. This commit stops to print uninitialized
value and misleading/false data.
Cc: stable@vger.kernel.org
Fixes: a4422ff221 (" usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20241030133632.2116-1-rex.nie@jaguarmicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ESAI of i.MX8QM is the same as i.MX6ULL. So allow fsl,imx8qm-esai
fallback to fsl,imx6ull-esai.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241028-esai_fix-v1-1-3c1432a5613c@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add OF device ID entry for SM8750 sound card with its own model name,
used to load proper Audioreach topology file. The sound card is
compatible with SM8450 and newer family.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241101165159.370619-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX95, the MQS module in Always-on (AON) domain only can
be accessed by System Controller Management Interface (SCMI)
MISC Protocol. So define a specific regmap_config for the case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241025062935.1071408-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_1'.
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_2'.
These errors were triggered because the variables 'val_1' and 'val_2'
could remain uninitialized if 'offlevel' is zero, meaning the loop
that assigns values to them does not execute. In this case,
'dma_addr_next' would use uninitialized data, potentially leading
to undefined behavior.
To resolve this, a conditional update for 'dma_addr_next' is added,
ensuring it is assigned only when 'val_1' and 'val_2' are read.
A new boolean variable 'val_read' flags when the values have been
retrieved, setting 'dma_addr_next' only if valid data is available.
This solution prevents the use of uninitialized data, maintaining
defined behavior for 'dma_addr_next' in all cases, and aligns with
expected usage of I2S RX descriptor data.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241102123630.25446-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9f ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Qualcomm X1E laptops have only two speakers. Regardless whether
this sound card driver is suitable for them (we could re-use one for
some older SoC), we should set reasonable channel map depending on the
number of channels, not always 4-speaker setup.
This change is necessary for bringing audio support on Lenovo Thinkpad
T14s with Qualcomm X1E78100 and only two speakers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241023124152.130706-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX6SL and i.MX6SX SPDIF blocks are compatible with i.MX35.
Document 'fsl,imx35-spdif' as a fallback compatible for these two
chip variants.
This fixes the following dt-schema warnings:
compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif'] is too long
compatible: ['fsl,imx6sx-spdif', 'fsl,imx35-spdif'] is too long
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20241028020749.36972-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shared the regular buffered write iomap_ops with the page fault path
and just check for the IOMAP_FAULT flag to skip delalloc punching.
This keeps the delalloc punching checks in one place, and will make it
easier to convert iomap to an iter model where the begin and end
handlers are merged into a single callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_filemap_huge_fault only ever serves DAX faults, so hard code the
call to xfs_dax_read_fault and open code __xfs_filemap_fault in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Only two of the callers of __xfs_filemap_fault every handle read faults.
Split the write_fault handling out of __xfs_filemap_fault so that all
callers call that directly either conditionally or unconditionally and
only leave the read fault handling in __xfs_filemap_fault.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Split the xfs_filemap_fault trace event into separate ones for read and
write faults and move them into the applicable locations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
It's just read in from the superblock and used without doing any
validity checks at all on the value.
Fixes: fb4f2b4e5a ("xfs: add sparse inode chunk alignment superblock field")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_zero_extent does some really odd gymnstics to calculate the block
layer sectors numbers passed to blkdev_issue_zeroout. This is because it
used to call sb_issue_zeroout and the calculations in that helper got
open coded here in the rather misleadingly named commit 3dc2916107
("dax: use sb_issue_zerout instead of calling dax_clear_sectors").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There are two invocations of xfs_alloc_log_agf in xfs_alloc_put_freelist.
The AGF does not change between the two calls. Although this does not pose
any practical problems, it seems like a small mistake. Therefore, fix it
by removing the first xfs_alloc_log_agf invocation.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:
[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670] klist_put+0x28/0x12c
[15278.138682][T50670] klist_del+0x14/0x20
[15278.142592][T50670] device_del+0xbc/0x3c0
[15278.146676][T50670] pci_remove_bus_device+0x84/0x120
[15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670] sriov_disable+0x50/0x11c
[15278.166829][T50670] pci_disable_sriov+0x24/0x30
[15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670] invoke_syscall+0x50/0x11c
[15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670] do_el0_svc+0x34/0xcc
[15278.207834][T50670] el0_svc+0x20/0x30
For details, see the following figure.
rmmod hclge disable VFs
----------------------------------------------------
hclge_exit() sriov_numvfs_store()
... device_lock()
pci_disable_sriov() hns3_pci_sriov_configure()
pci_disable_sriov()
sriov_disable()
sriov_disable() if !num_VFs :
if !num_VFs : return;
return; sriov_del_vfs()
sriov_del_vfs() ...
... klist_put()
klist_put() ...
... num_VFs = 0;
num_VFs = 0; device_unlock();
In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store().
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101091507.3644584-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As this iommu driver now supports page faults for requests without
PASID, page requests should be drained when a domain is removed from
the RID2PASID entry.
This results in the intel_iommu_drain_pasid_prq() call being moved to
intel_pasid_tear_down_entry(). This indicates that when a translation
is removed from any PASID entry and the PRI has been enabled on the
device, page requests are drained in the domain detachment path.
The intel_iommu_drain_pasid_prq() helper has been modified to support
sending device TLB invalidation requests for both PASID and non-PASID
cases.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241101045543.70086-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID support within the IOMMU is not required to enable the Page
Request Queue, only the PRS capability.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-5-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add IOMMU_HWPT_FAULT_ID_VALID as part of the valid flags when doing an
iommufd_hwpt_alloc allowing the use of an iommu fault allocation
(iommu_fault_alloc) with the IOMMU_HWPT_ALLOC ioctl.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-4-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move IOMMU_IOPF from under INTEL_IOMMU_SVM into INTEL_IOMMU. This
certifies that the core intel iommu utilizes the IOPF library
functions, independent of the INTEL_IOMMU_SVM config.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-3-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID is not strictly needed when handling a PRQ event; remove the check
for the pasid present bit in the request. This change was not included
in the creation of prq.c to emphasize the change in capability checks
when handing PRQ events.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-2-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IO page faults are no longer dependent on CONFIG_INTEL_IOMMU_SVM. Move
all Page Request Queue (PRQ) functions that handle prq events to a new
file in drivers/iommu/intel/prq.c. The page_req_des struct is now
declared in drivers/iommu/intel/prq.c.
No functional changes are intended. This is a preparation patch to
enable the use of IO page faults outside the SVM/PASID use cases.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-1-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some issues in pgtable_walk():
1. Super page is dumped as non-present page
2. dma_pte_superpage() should not check against leaf page table entries
3. Pointer pte is never NULL so checking it is meaningless
4. When an entry is not present, it still makes sense to dump the entry
content.
Fix 1,2 by checking dma_pte_superpage()'s returned value after level check.
Fix 3 by removing pte check.
Fix 4 by checking present bit after printing.
By this chance, change to print "page table not present" instead of "PTE
not present" to be clearer.
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-3-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some issues in dmar_fault_dump_ptes():
1. return value of phys_to_virt() is used for checking if an entry is
present.
2. dump is confusing, e.g., "pasid table entry is not present", confusing
by unpresent pasid table vs. unpresent pasid table entry. Current code
means the former.
3. pgtable_walk() is called without checking if page table is present.
Fix 1 by checking present bit of an entry before dump a lower level entry.
Fix 2 by removing "entry" string, e.g., "pasid table is not present".
Fix 3 by checking page table present before walk.
Take issue 3 for example, before fix:
[ 442.240357] DMAR: pasid dir entry: 0x000000012c83e001
[ 442.246661] DMAR: pasid table entry[0]: 0x0000000000000000
[ 442.253429] DMAR: pasid table entry[1]: 0x0000000000000000
[ 442.260203] DMAR: pasid table entry[2]: 0x0000000000000000
[ 442.266969] DMAR: pasid table entry[3]: 0x0000000000000000
[ 442.273733] DMAR: pasid table entry[4]: 0x0000000000000000
[ 442.280479] DMAR: pasid table entry[5]: 0x0000000000000000
[ 442.287234] DMAR: pasid table entry[6]: 0x0000000000000000
[ 442.293989] DMAR: pasid table entry[7]: 0x0000000000000000
[ 442.300742] DMAR: PTE not present at level 2
After fix:
...
[ 357.241214] DMAR: pasid table entry[6]: 0x0000000000000000
[ 357.248022] DMAR: pasid table entry[7]: 0x0000000000000000
[ 357.254824] DMAR: scalable mode page table is not present
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-2-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dmar_domian has stored the s1_cfg which includes the s1_pgtbl info, so
no need to store s1_pgtbl, hence drop it.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241025143339.2328991-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dmar_msi_read() has been unused since 2022 in
commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture")
Remove it.
(dmar_msi_write still exists and is used once).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241022002702.302728-1-linux@treblig.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GCC is not happy with the current code, e.g.:
.../iommu/intel/dmar.c:1063:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 13
1063 | sprintf(iommu->name, "dmar%d", iommu->seq_id);
When `make W=1` is supplied, this prevents kernel building. Fix it by
increasing the buffer size for device name and use sizeoF() instead of
hard coded constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241014104529.4025937-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The macro PCI_DEVID() can be used instead of compose it manually.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240829021011.4135618-1-ruanjinjie@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
