[ Upstream commit a1b1ee0348 ]
Switch SD0 write-protect detection to a GPIO on the RZ/T2H and RZ/N2H
EVKs. Both boards use a full-size SD card slot on the SD0 channel with
a dedicated WP pin.
The RZ/T2H and RZ/N2H SoCs use of_data_rcar_gen3, which sets
MMC_CAP2_NO_WRITE_PROTECT and causes the core to ignore the WP signal
unless a wp-gpios property is provided. Describe the WP pin as a GPIO
to allow the MMC core to evaluate the write-protect status correctly.
Fixes: d065453e5e ("arm64: dts: renesas: rzt2h-rzn2h-evk: Enable SD card slot")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260106131319.643084-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6259094ee8 ]
In svs_enable_debug_write(), the buf allocated by memdup_user_nul()
is leaked if kstrtoint() fails.
Fix this by using __free(kfree) to automatically free buf, eliminating
the need for explicit kfree() calls and preventing leaks.
Fixes: 13f1bbcfb5 ("soc: mediatek: SVS: add debug commands")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
[Angelo: Added missing cleanup.h inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fbc09eb0b ]
Commit 74e19ef0ff ("uaccess: Add speculation barrier to
copy_from_user()") added a redundant barrier_nospec() in
copy_from_user(), because powerpc is already calling
barrier_nospec() in allow_read_from_user() and
allow_read_write_user(). But on other architectures that
call to barrier_nospec() was missing. So change powerpc
instead of reverting the above commit and having to fix
other architectures one by one. This is now possible
because barrier_nospec() has also been added in
copy_from_user_iter().
Move barrier_nospec() out of allow_read_from_user() and
allow_read_write_user(). This will also allow reuse of those
functions when implementing masked user access which doesn't
require barrier_nospec().
Don't add it back in raw_copy_from_user() as it is already called
by copy_from_user() and copy_from_user_iter().
Fixes: 74e19ef0ff ("uaccess: Add speculation barrier to copy_from_user()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/f29612105c5fcbc8ceb7303808ddc1a781f0f6b5.1766574657.git.chleroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b2761eb12 ]
The P66's device tree includes the reference design dtsi files, which
defines a node and properties for the touchpanel in the common design.
The P66 dts file then overrides all the properties to match its own
design, but as the touchpanel model is different, a different schema
is matched. This other schema uses a different name for the GPIO.
The original submission added the correct GPIO property, but did not
delete the one inherited from the reference design, causing validation
errors.
Explicitly delete the incorrect GPIO property.
Fixes: 2a53aff272 ("ARM: dts: sun5i: Enable touchscreen on Utoo P66")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251225103616.3203473-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7db5fbe508 ]
Trivial change, Analog Devices vendor prefix is "adi", but there is
a valid "ad" vendor prefix of another company, this may explain why
the issue hasn't been discovered by the automatic tests.
A problem of not described compatible value is out of this change scope.
Fixes: c636eeb751 ("arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251226003923.3341904-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3af51501e2 ]
It seems the USB combo SS1 and SS2 ref clocks have another gate, unlike
the SS0. These gates are part of the TCSR clock controller.
At least on Dell XPS 13 (9345), if the ref clock provided by the TCSR
clock controller for SS1 PHY is disabled on the clk_disable_unused late
initcall, the PHY fails to initialize. It doesn't happen on the SS0 PHY
and the SS2 is not used on this device.
This doesn't seem to be a problem on CRD though. It might be that the
RPMh has a vote for it from some other consumer and does not actually
disable it when ther kernel drops its vote.
Either way, these TCSR provided clocks seem to be the correct ones for
the SS1 and SS2, so use them instead.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251103-dts-qcom-x1e80100-fix-combo-ref-clks-v1-1-f395ec3cb7e8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad33ee060b ]
This regulator is used only for the display, which is enabled by the
bootloader and left on for continuous splash. Mark it as such.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-dts-oneplus-regulators-v2-3-3e67cea1e4e7@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b98b9dad ]
The touchscreen isn't enabled by bootloader and doesn't need to be
enabled at boot, only when the driver probes, thus remove the
regulator-boot-on property.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-dts-oneplus-regulators-v2-1-3e67cea1e4e7@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e814796dfc ]
Historically sdm630.dtsi has used 1 byte length for the gpu_speed_bin
cell, although it spans two bytes (offset 5, size 7 bits). It was being
accepted by the kernel because before the commit 7a06ef7510 ("nvmem:
core: fix bit offsets of more than one byte") the kernel didn't have
length check. After this commit nvmem core rejects QFPROM on sdm630 /
sdm660, making GPU and USB unusable on those platforms.
Set the size of the gpu_speed_bin cell to 2 bytes, fixing the parsing
error. While we are at it, update the length to 8 bits as pointed out by
Alexey Minnekhanov.
Fixes: b190fb0106 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Link: https://lore.kernel.org/r/20251211-sdm630-fix-gpu-v2-1-92f0e736dba0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e07ebe744 ]
When devm_platform_ioremap_resource() fails, it returns various
error codes. Returning a hardcoded -ENOMEM masks the actual
failure reason.
Use PTR_ERR() to propagate the actual error code returned by
devm_platform_ioremap_resource() instead of -ENOMEM.
Fixes: 75e0a1e301 ("clk: qcom: define probe by index API as common API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251217041338.2432-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53a5c1d98d ]
As per datasheet of the HDMI protection IC the CEC_IC pin has been
configured as open-drain.
Fixes: ddabb3ce3f ("arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8401527abb ]
As per datasheet of the HDMI protection IC the CEC_IC pin has been
configured as open-drain.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be4d4543f7 ]
The FF-A specification allows NOTIFICATION_INFO_GET to return either a
64-bit (FFA_FN64_SUCCESS) or a 32-bit (FFA_SUCCESS) response, depending on
whether the firmware chooses the SMC64 or SMC32 calling convention.
The driver previously detected the response format by checking ret.a0, but
still interpreted the returned ID lists (x3..x17 or w3..w7) as if they always
followed the 64-bit SMC64 layout. In the SMC32 case, the upper 32 bits of
each argument register are undefined by the calling convention, meaning the
driver could read stale or garbage values when parsing notification IDs.
This resulted in incorrectly decoded partition/VCPU IDs whenever the FF-A
firmware used an SMC32 return path.
Fix the issue by:
- Introducing logic to map list indices to the correct u16 offsets,
depending on whether the response width matches the kernel word size
or is a 32-bit response on a 64-bit kernel.
- Ensuring that the packed ID list is parsed using the proper layout,
avoiding reads from undefined upper halves in the SMC32 case.
With this change, NOTIFICATION_INFO_GET now correctly interprets ID list
entries regardless of the response width, aligning the driver with the FF-A
specification.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Sourav Mohapatra <sourav.mohapatra@arm.com>
Message-Id: <20251218142001.2457111-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f1268361 ]
The snprintf() can't really overflow because we're writing a max of 42
bytes to a PAGE_SIZE buffer. But my static checker complains because
the limit calculation doesn't take the first 11 space characters that
we wrote into the buffer into consideration. Fix this for the sake of
correctness even though it doesn't affect runtime.
Also delete an earlier "space -= n;" which was not used.
Fixes: 68d086f89b ("i5400_edac: improve debug messages to better represent the filled memory")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/ccd06b91748e7ed8e33eeb2ff1e7b98700879304.1765290801.git.dan.carpenter@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b5c7e83ac ]
The snprintf() can't really overflow because we're writing a max of 42
bytes to a PAGE_SIZE buffer. But the limit calculation doesn't take
the first 11 bytes that we wrote into consideration so the limit is
not correct. Just fix it for correctness even though it doesn't
affect runtime.
Fixes: 64e1fdaf55 ("i5000_edac: Fix the logic that retrieves memory information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/07cd652c51e77aad5a8350e1a7cd9407e5bbe373.1765290801.git.dan.carpenter@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fe01a7955 ]
Fail the driver probe if the region can't be mapped
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Fixes: 20bb6c9de1 ("soc: qcom: smem: map only partitions used by local HOST")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251209074610.3751781-1-jorge.ramirez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5669645c05 ]
persistent_ram_save_old() can be called multiple times for the same
persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz
for PSTORE_TYPE_DMESG records).
Currently, the function only allocates prz->old_log when it is NULL,
but it unconditionally updates prz->old_log_size to the current buffer
size and then performs memcpy_fromio() using this new size. If the
buffer size has grown since the first allocation (which can happen
across different kernel boot cycles), this leads to:
1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls
2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer
using the incorrect (larger) old_log_size
The KASAN splat would look similar to:
BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x...
Read of size N at addr ... by task ...
The conditions are likely extremely hard to hit:
0. Crash with a ramoops write of less-than-record-max-size bytes.
1. Reboot: ramoops registers, pstore_get_records(0) reads old crash,
allocates old_log with size X
2. Crash handler registered, timer started (if pstore_update_ms >= 0)
3. Oops happens (non-fatal, system continues)
4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X)
5. pstore_new_entry = 1, pstore_timer_kick() called
6. System continues running (not a panic oops)
7. Timer fires after pstore_update_ms milliseconds
8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1)
9. ramoops_get_next_prz() → persistent_ram_save_old()
10. buffer_size() returns Y, but old_log is X bytes
11. Y > X: memcpy_fromio() overflows heap
Requirements:
- a prior crash record exists that did not fill the record size
(almost impossible since the crash handler writes as much as it
can possibly fit into the record, capped by max record size and
the kmsg buffer almost always exceeds the max record size)
- pstore_update_ms >= 0 (disabled by default)
- Non-fatal oops (system survives)
Free and reallocate the buffer when the new size differs from the
previously allocated size. This ensures old_log always has sufficient
space for the data being copied.
Fixes: 201e4aca5a ("pstore/ram: Should update old dmesg buffer before reading")
Signed-off-by: Sai Ritvik Tanksalkar <stanksal@purdue.edu>
Link: https://patch.msgid.link/20260201132240.2948732-1-stanksal@purdue.edu
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88af9fefed ]
The issue occurs in TOO_MANY_FRAGS test case when xdp_zc_max_segs is set to
an odd number.
TOO_MANY_FRAGS test case contains an invalid packet consisting of
(xdp_zc_max_segs) frags. Every frag, even the last one has XDP_PKT_CONTD
flag set. This packet is expected to be dropped. After that, there is a
valid linear packet, which is expected to be received back.
Once (xdp_zc_max_segs) is an odd number, the last packet cannot be
received, if packet forwarding between Rx and Tx interfaces relies on
the ethernet header, e.g. checks for ETH_P_LOOPBACK. Packet is malformed,
if all traffic is looped.
Turns out, sending function processes multiple invalid frags as if they
were in 2-frag packets. So once the invalid mbuf packet contains an odd
number of those, the valid packet after gets paired with the previous
invalid descriptor, and hence does not get an ethernet header generated, so
it is either dropped or malformed.
Make invalid packets in verbatim mode always have only a single frag. For
such packets, number of frags is otherwise meaningless, as descriptor flags
are pre-configured in verbatim mode and packet data is not generated for
invalid descriptors.
Fixes: 697604492b ("selftests/xsk: add invalid descriptor test for multi-buffer")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20260203155103.2305816-3-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42e41b2a0a ]
Referenced commit reduced the scope of the variable pkt, so now it has to
be reinitialized via pkt_stream_get_next_rx_pkt(), which also increments
some counters. When the packet is interrupted by the batch ending, pkt
stream therefore proceeds to the next packet, while xsk ring still contains
the previous one, this results in a pkt_nb mismatch.
Decrement the affected counters when packet is interrupted.
Fixes: 8913e653e9 ("selftests/xsk: Iterate over all the sockets in the receive pkts function")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20260203155103.2305816-2-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ab77f35a7 ]
AF_XDP features are tested by the test_xsk.sh script but not by the
test_progs framework. The tests used by the script are defined in
xksxceiver.c which can't be integrated in the test_progs framework as is.
Extract these test definitions from xskxceiver{.c/.h} to put them in new
test_xsk{.c/.h} files.
Keep the main() function and its unshared dependencies in xksxceiver to
avoid impacting the test_xsk.sh script which is often used to test real
hardware.
Move ksft_test_result_*() calls to xskxceiver.c to keep the kselftest's
report valid
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20251031-xsk-v7-1-39fe486593a3@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 42e41b2a0a ("selftests/xsk: properly handle batch ending in the middle of a packet")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc2f39d6ac ]
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever.
Fixes: be4000bc46 ("hwrng: create filler thread")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Lianjie Wang <karin0.zst@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e74b96d77d ]
The HW RNG core allows for manual selection of which RNG device to use,
but does not allow for no device to be enabled. It may be desirable to
do this on systems with only a single suitable hardware RNG, where we
need exclusive access to other functionality on this device. In
particular when performing TPM firmware upgrades this lets us ensure the
kernel does not try to access the device.
Before:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
After:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
root@debian-qemu-efi:~# echo none > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:none
grep: /sys/devices/virtual/misc/hw_random/rng_quality: No such device
/sys/devices/virtual/misc/hw_random/rng_selected:1
(Observe using bpftrace no calls to TPM being made)
root@debian-qemu-efi:~# echo "" > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
(Observe using bpftrace that calls to the TPM resume)
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: cc2f39d6ac ("hwrng: core - use RCU and work_struct to fix race condition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb679fdae ]
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 7467147ef9 ("crypto: starfive - Use dma for aes requests")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2c86aa621 ]
Currently, bpf_map_get_info_by_fd calculates and caches the hash of the
map regardless of the map's frozen state.
This leads to a TOCTOU bug where userspace can call
BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map
contents before freezing.
Therefore, a trusted loader can be tricked into verifying the stale hash
while loading the modified contents.
Fix this by returning -EPERM if the map is not frozen when the hash is
requested. This ensures the hash is only generated for the final,
immutable state of the map.
Fixes: ea2e6467ac ("bpf: Return hashes of maps in BPF_OBJ_GET_INFO_BY_FD")
Reported-by: Toshi Piazza <toshi.piazza@microsoft.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205070755.695776-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46a03ea50b ]
Remove duplicate entries from the bprm_stack_limits KUnit test vector
table. The duplicates do not add coverage and only increase test size.
Signed-off-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Fixes: 60371f43e5 ("exec: Add KUnit test for bprm_stack_limits()")
Link: https://patch.msgid.link/20260203175950.43710-1-titouan.ameline@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94894c9c47 ]
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios.
Fixes: 4bdced5c9a ("sched/rt: Simplify the IPI based RT balancing logic")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Chen Jinghuang <chenjinghuang2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://patch.msgid.link/20260122012533.673768-1-chenjinghuang2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cb3b27693 ]
The defer params were not cleared in __dl_clear_params. Clear them.
Without this is some of my test cases are flaking and the DL timer is
not starting correctly AFAICS.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-2-arighi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef92b98f5f ]
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke other
interrupt handlers and this supposed to happen from hard interrupt context.
Use IRQF_NO_THREAD to forbid forced-threading.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-21-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553b4999cb ]
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Mark explained that this should not happen with this hardware since it
is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will
refuse to accept such a handler.
Set IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 1c6c69525b ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18d2844623 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: c89ac9182e ("rtc: support for the Amlogic on-chip RTC")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260128095540.863589-13-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7fb84ea70 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: 309b6341d5 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-12-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c858d6c66 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: a29d64a45e ("EDAC, altera: Add IRQ Flags to disable IRQ while handling")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-11-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd81f07e9a ]
There is no added value in efct_intr_msix() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-8-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28abed6569 ]
There is no added value in btintel_pcie_msix_isr() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-7-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bfcdccb4d ]
request_threaded_irq() is invoked with a primary and a secondary handler
and no flags are passed. The primary handler is the same as
irq_default_primary_handler() so there is no need to have an identical
copy.
The lack of the IRQF_ONESHOT can be dangerous because the interrupt
source is not masked while the threaded handler is active. This means,
especially on LEVEL typed interrupt lines, the interrupt can fire again
before the threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 72fe00f01f ("x86/amd-iommu: Use threaded interupt handler")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-4-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bc712877 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until the
secondary (threaded) handler is done. If only a primary handler is used
then the flag makes no sense because the interrupt cannot fire (again)
while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
The flag was added to match the flag on the shared handler which uses a
threaded handler and therefore IRQF_ONESHOT. This is no longer needed
because devm_request_irq() now passes IRQF_COND_ONESHOT for this case.
Revert adding IRQF_ONESHOT to irqflags.
Fixes: 8f812373d1 ("platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-3-bigeasy@linutronix.de
Closes: https://lore.kernel.org/all/555f1c56-0f74-41bf-8bd2-6217e0aab0c6@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 943b052ded ]
The flag IRQF_COND_ONESHOT was already force-added to request_irq() because
the ACPI SCI interrupt handler is using the IRQF_ONESHOT flag which breaks
all shared handlers.
devm_request_irq() needs the same change since some users, such as
int0002_vgpio, are using this function instead.
Add IRQF_COND_ONESHOT to the flags passed to devm_request_irq().
Fixes: c37927a203 ("genirq: Set IRQF_COND_ONESHOT in request_irq()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6557f1565d ]
While making some maps in Cilium read-only from the BPF side, we noticed
that the bpf_xdp_store_bytes proto is incorrect. In particular, the
verifier was throwing the following error:
; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr),
&nat->address, 4, 0);
635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx()
636: (b4) w2 = 26 ; R2=26
637: (b4) w4 = 4 ; R4=4
638: (b4) w5 = 0 ; R5=0
639: (85) call bpf_xdp_store_bytes#190
write into map forbidden, value_size=6 off=0 size=4
nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE.
The verifier checks the helper's memory access to R3 in
check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third
argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the
MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3.
Given R3 points to a read-only map, the check fails.
Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading
from uninitialized memory.
This patch simply fixes the expected argument type to match that of
bpf_skb_store_bytes.
Fixes: 3f364222d0 ("net: xdp: introduce bpf_xdp_pointer utility routine")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/9fa3c9f72d806e82541071c4df88b8cba28ad6a9.1769875479.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d43252b30 ]
When commit 0e1a4d427f ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Fixes: 0e1a4d427f ("crypto: caam: Unembed net_dev structure in dpaa2")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3135057f ]
Since the number of devices is limited, and the number
of tfms may exceed the number of devices, to ensure that
tfms can be successfully allocated, support tfms
sharing the same device.
Fixes: e4d9d10ef4 ("crypto: hisilicon/trng - add support for PRNG")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0207f94971 ]
We now include the attached function in the stack trace,
fixing the test accordingly.
Fixes: c9e208fa93 ("selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-4-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aea2517999 ]
Mahe reported missing function from stack trace on top of kprobe
multi program. The missing function is the very first one in the
stacktrace, the one that the bpf program is attached to.
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
('*' is used for kprobe_multi attachment)
The reason is that the previous change (the Fixes commit) fixed
stack unwind for tracepoint, but removed attached function address
from the stack trace on top of kprobe multi programs, which I also
overlooked in the related test (check following patch).
The tracepoint and kprobe_multi have different stack setup, but use
same unwind path. I think it's better to keep the previous change,
which fixed tracepoint unwind and instead change the kprobe multi
unwind as explained below.
The bpf program stack unwind calls perf_callchain_kernel for kernel
portion and it follows two unwind paths based on X86_EFLAGS_FIXED
bit in pt_regs.flags.
When the bit set we unwind from stack represented by pt_regs argument,
otherwise we unwind currently executed stack up to 'first_frame'
boundary.
The 'first_frame' value is taken from regs.rsp value, but ftrace_caller
and ftrace_regs_caller (ftrace trampoline) functions set the regs.rsp
to the previous stack frame, so we skip the attached function entry.
If we switch kprobe_multi unwind to use the X86_EFLAGS_FIXED bit,
we set the start of the unwind to the attached function address.
As another benefit we also cut extra unwind cycles needed to reach
the 'first_frame' boundary.
The speedup can be measured with trigger bench for kprobe_multi
program and stacktrace support.
- trigger bench with stacktrace on current code:
kprobe-multi : 0.810 ± 0.001M/s
kretprobe-multi: 0.808 ± 0.001M/s
- and with the fix:
kprobe-multi : 1.264 ± 0.001M/s
kretprobe-multi: 1.401 ± 0.002M/s
With the fix, the entry probe stacktrace:
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
__x64_sys_newuname+9
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
The return probe skips the attached function, because it's no longer
on the stack at the point of the unwind and this way is the same how
standard kretprobe works.
# bpftrace -e 'kretprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
Fixes: 6d08340d1e ("Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"")
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-3-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bc11700e0 ]
The previous change (Fixes commit) messed up the rsp register value,
which is wrong because it's already adjusted with FRAME_SIZE, we need
the original rsp value.
This change does not affect fprobe current kernel unwind, the !perf_hw_regs
path perf_callchain_kernel:
if (perf_hw_regs(regs)) {
if (perf_callchain_store(entry, regs->ip))
return;
unwind_start(&state, current, regs, NULL);
} else {
unwind_start(&state, current, NULL, (void *)regs->sp);
}
which uses pt_regs.sp as first_frame boundary (FRAME_SIZE shift makes
no difference, unwind stil stops at the right frame).
This change fixes the other path when we want to unwind directly from
pt_regs sp/fp/ip state, which is coming in following change.
Fixes: 20a0bc1027 ("x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ceeadc7b5 ]
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5abcc33ee ]
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`.
Fixes: a71475582a ("crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd")
Signed-off-by: Ella Ma <alansnape3058@gmail.com>
Acked-by: Tom Lendacky <thomas.lendacky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
