commit 10dc959398 upstream.
Currently this is checked before running the pending work. Normally this
is quite fine, as work items either end up blocking (which will create a
new worker for other items), or they complete fairly quickly. But syzbot
reports an issue where io-wq takes seemingly forever to exit, and with a
bit of debugging, this turns out to be because it queues a bunch of big
(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't
support ->read_iter(), loop_rw_iter() ends up handling them. Each read
returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of
these pending, processing the whole chain can take a long time. Easily
longer than the syzbot uninterruptible sleep timeout of 140 seconds.
This then triggers a complaint off the io-wq exit path:
INFO: task syz.4.135:6326 blocked for more than 143 seconds.
Not tainted syzkaller #0
Blocked by coredump.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5256 [inline]
__schedule+0x1139/0x6150 kernel/sched/core.c:6863
__schedule_loop kernel/sched/core.c:6945 [inline]
schedule+0xe7/0x3a0 kernel/sched/core.c:6960
schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75
do_wait_for_common kernel/sched/completion.c:100 [inline]
__wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121
io_wq_exit_workers io_uring/io-wq.c:1328 [inline]
io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356
io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203
io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651
io_uring_files_cancel include/linux/io_uring.h:19 [inline]
do_exit+0x2ce/0x2bd0 kernel/exit.c:911
do_group_exit+0xd3/0x2a0 kernel/exit.c:1112
get_signal+0x2671/0x26d0 kernel/signal.c:3034
arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:41 [inline]
exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline]
do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa02738f749
RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098
RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98
There's really nothing wrong here, outside of processing these reads
will take a LONG time. However, we can speed up the exit by checking the
IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will
exit the ring after queueing up all of these reads. Then once the first
item is processed, io-wq will simply cancel the rest. That should avoid
syzbot running into this complaint again.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/68a2decc.050a0220.e29e5.0099.GAE@google.com/
Reported-by: syzbot+4eb282331cab6d5b6588@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e806f7dde8 upstream.
When __do_ajdtimex() was introduced to handle adjtimex for any
timekeeper, this reference to tk_core was not updated. When called on an
auxiliary timekeeper, the core timekeeper would be updated incorrectly.
This gets caught by the lock debugging diagnostics because the
timekeepers sequence lock gets written to without holding its
associated spinlock:
WARNING: include/linux/seqlock.h:226 at __do_adjtimex+0x394/0x3b0, CPU#2: test/125
aux_clock_adj (kernel/time/timekeeping.c:2979)
__do_sys_clock_adjtime (kernel/time/posix-timers.c:1161 kernel/time/posix-timers.c:1173)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Update the correct auxiliary timekeeper.
Fixes: 775f71ebed ("timekeeping: Make do_adjtimex() reusable")
Fixes: ecf3e70304 ("timekeeping: Provide adjtimex() for auxiliary clocks")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260120-timekeeper-auxclock-leapstate-v1-1-5b358c6b3cfd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16aca2c98a upstream.
Commit 2b7226af73 ("mm/memcg: make memory.reclaim interface generic")
moved proactive reclaim logic from memory.reclaim handler to a generic
user_proactive_reclaim() helper to be used for per-node proactive reclaim.
However, user_proactive_reclaim() was only defined under CONFIG_NUMA, with
a stub always returning 0 otherwise. This broke memory.reclaim on
!CONFIG_NUMA configs, causing it to report success without actually
attempting reclaim.
Move the definition of user_proactive_reclaim() outside CONFIG_NUMA, and
instead define a stub for __node_reclaim() in the !CONFIG_NUMA case.
__node_reclaim() is only called from user_proactive_reclaim() when a write
is made to sys/devices/system/node/nodeX/reclaim, which is only defined
with CONFIG_NUMA.
Link: https://lkml.kernel.org/r/20260116205247.928004-1-yosry.ahmed@linux.dev
Fixes: 2b7226af73 ("mm/memcg: make memory.reclaim interface generic")
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8682d500f upstream.
PMD page table unsharing no longer touches the refcount of a PMD page
table. Also, it is not about dropping the refcount of a "PMD page" but
the "PMD page table".
Let's just simplify by saying that the PMD page table was unmapped,
consequently also unmapping the folio that was mapped into this page.
This code should be deduplicated in the future.
Link: https://lkml.kernel.org/r/20251223214037.580860-4-david@kernel.org
Fixes: 59d9094df3 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Uschakow, Stanislav" <suschako@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca1a47cd3f upstream.
Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using
mmu_gather)", v3.
One functional fix, one performance regression fix, and two related
comment fixes.
I cleaned up my prototype I recently shared [1] for the performance fix,
deferring most of the cleanups I had in the prototype to a later point.
While doing that I identified the other things.
The goal of this patch set is to be backported to stable trees "fairly"
easily. At least patch #1 and #4.
Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing
Patch #2 + #3 are simple comment fixes that patch #4 interacts with.
Patch #4 is a fix for the reported performance regression due to excessive
IPI broadcasts during fork()+exit().
The last patch is all about TLB flushes, IPIs and mmu_gather.
Read: complicated
There are plenty of cleanups in the future to be had + one reasonable
optimization on x86. But that's all out of scope for this series.
Runtime tested, with a focus on fixing the performance regression using
the original reproducer [2] on x86.
This patch (of 4):
We switched from (wrongly) using the page count to an independent shared
count. Now, shared page tables have a refcount of 1 (excluding
speculative references) and instead use ptdesc->pt_share_count to identify
sharing.
We didn't convert hugetlb_pmd_shared(), so right now, we would never
detect a shared PMD table as such, because sharing/unsharing no longer
touches the refcount of a PMD table.
Page migration, like mbind() or migrate_pages() would allow for migrating
folios mapped into such shared PMD tables, even though the folios are not
exclusive. In smaps we would account them as "private" although they are
"shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the
pagemap interface.
Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().
Link: https://lkml.kernel.org/r/20251223214037.580860-1-david@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-2-david@kernel.org
Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [1]
Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [2]
Fixes: 59d9094df3 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Uschakow, Stanislav" <suschako@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25150715e0 upstream.
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver.
Cc: stable@vger.kernel.org
Fixes: 5f94f181ca ("platform/x86: hp-bioscfg: bioscfg-h")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdee1b0972 upstream.
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes.
Cc: stable@vger.kernel.org
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdcdf968be upstream.
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1e372b2461)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9a49aa302 upstream.
Above the while() loop in wait_sb_inodes(), we document that we must wait
for all pages under writeback for data integrity. Consequently, if a
mapping, like fuse, traditionally does not have data integrity semantics,
there is no need to wait at all; we can simply skip these inodes.
This restores fuse back to prior behavior where syncs are no-ops. This
fixes a user regression where if a system is running a faulty fuse server
that does not reply to issued write requests, this causes wait_sb_inodes()
to wait forever.
Link: https://lkml.kernel.org/r/20260105211737.4105620-2-joannelkoong@gmail.com
Fixes: 0c58a97f91 ("fuse: remove tmp folio for writebacks and internal rb tree")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Reported-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Tested-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Bernd Schubert <bschubert@ddn.com>
Cc: Bonaccorso Salvatore <carnil@debian.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10d28cffb3 upstream.
The `COMEDI_RANGEINFO` ioctl does not work properly for subdevice
indices above 15. Currently, the only in-tree COMEDI drivers that
support more than 16 subdevices are the "8255" driver and the
"comedi_bond" driver. Making the ioctl work for subdevice indices up to
255 is achievable. It needs minor changes to the handling of the
`COMEDI_RANGEINFO` and `COMEDI_CHANINFO` ioctls that should be mostly
harmless to user-space, apart from making them less broken. Details
follow...
The `COMEDI_RANGEINFO` ioctl command gets the list of supported ranges
(usually with units of volts or milliamps) for a COMEDI subdevice or
channel. (Only some subdevices have per-channel range tables, indicated
by the `SDF_RANGETYPE` flag in the subdevice information.) It uses a
`range_type` value and a user-space pointer, both supplied by
user-space, but the `range_type` value should match what was obtained
using the `COMEDI_CHANINFO` ioctl (if the subdevice has per-channel
range tables) or `COMEDI_SUBDINFO` ioctl (if the subdevice uses a
single range table for all channels). Bits 15 to 0 of the `range_type`
value contain the length of the range table, which is the only part that
user-space should care about (so it can use a suitably sized buffer to
fetch the range table). Bits 23 to 16 store the channel index, which is
assumed to be no more than 255 if the subdevice has per-channel range
tables, and is set to 0 if the subdevice has a single range table. For
`range_type` values produced by the `COMEDI_SUBDINFO` ioctl, bits 31 to
24 contain the subdevice index, which is assumed to be no more than 255.
But for `range_type` values produced by the `COMEDI_CHANINFO` ioctl,
bits 27 to 24 contain the subdevice index, which is assumed to be no
more than 15, and bits 31 to 28 contain the COMEDI device's minor device
number for some unknown reason lost in the mists of time. The
`COMEDI_RANGEINFO` ioctl extract the length from bits 15 to 0 of the
user-supplied `range_type` value, extracts the channel index from bits
23 to 16 (only used if the subdevice has per-channel range tables),
extracts the subdevice index from bits 27 to 24, and ignores bits 31 to
28. So for subdevice indices 16 to 255, the `COMEDI_SUBDINFO` or
`COMEDI_CHANINFO` ioctl will report a `range_type` value that doesn't
work with the `COMEDI_RANGEINFO` ioctl. It will either get the range
table for the subdevice index modulo 16, or will fail with `-EINVAL`.
To fix this, always use bits 31 to 24 of the `range_type` value to hold
the subdevice index (assumed to be no more than 255). This affects the
`COMEDI_CHANINFO` and `COMEDI_RANGEINFO` ioctls. There should not be
anything in user-space that depends on the old, broken usage, although
it may now see different values in bits 31 to 28 of the `range_type`
values reported by the `COMEDI_CHANINFO` ioctl for subdevices that have
per-channel subdevices. User-space should not be trying to decode bits
31 to 16 of the `range_type` values anyway.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable@vger.kernel.org #5.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251203162438.176841-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b505f19445 upstream.
For native, the choice of PTE is fine. There's real memory backing the
non-present PTE. However, for XenPV, Xen complains:
(XEN) d1 L1TF-vulnerable L1e 8010000018200066 - Shadowing
To explain, some background on XenPV pagetables:
Xen PV guests are control their own pagetables; they choose the new
PTE value, and use hypercalls to make changes so Xen can audit for
safety.
In addition to a regular reference count, Xen also maintains a type
reference count. e.g. SegDesc (referenced by vGDT/vLDT), Writable
(referenced with _PAGE_RW) or L{1..4} (referenced by vCR3 or a lower
pagetable level). This is in order to prevent e.g. a page being
inserted into the pagetables for which the guest has a writable mapping.
For non-present mappings, all other bits become software accessible,
and typically contain metadata rather a real frame address. There is
nothing that a reference count could sensibly be tied to. As such, even
if Xen could recognise the address as currently safe, nothing would
prevent that frame from changing owner to another VM in the future.
When Xen detects a PV guest writing a L1TF-PTE, it responds by
activating shadow paging. This is normally only used for the live phase
of migration, and comes with a reasonable overhead.
KFENCE only cares about getting #PF to catch wild accesses; it doesn't
care about the value for non-present mappings. Use a fully inverted PTE,
to avoid hitting the slow path when running under Xen.
While adjusting the logic, take the opportunity to skip all actions if the
PTE is already in the right state, half the number PVOps callouts, and
skip TLB maintenance on a !P -> P transition which benefits non-Xen cases
too.
Link: https://lkml.kernel.org/r/20260106180426.710013-1-andrew.cooper3@citrix.com
Fixes: 1dc0da6e9e ("x86, kfence: enable KFENCE for x86")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c28769a51 upstream.
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99a3e3a1cf upstream.
On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current
check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ
context, but misses the case where preemption is disabled.
When a BPF program runs from a tracepoint with preemption disabled
(preempt_count > 0), kmalloc_nolock() proceeds to call
local_lock_irqsave() which attempts to acquire a sleeping lock,
triggering:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128
preempt_count: 2, expected: 0
Fix this by checking !preemptible() on PREEMPT_RT, which directly
expresses the constraint that we cannot take a sleeping lock when
preemption is disabled. This encompasses the previous checks for NMI
and hard IRQ contexts while also catching cases where preemption is
disabled.
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Reported-by: syzbot+b1546ad4a95331b2101e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b1546ad4a95331b2101e
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260113150639.48407-1-swarajgaikwad1925@gmail.co
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e4a81881c upstream.
NanoPi M5 derives its analog sound signal from SAI2 in M0 pin mode, so the
MCLK pin should be configured accordingly for the sound codec to get its
I2S signal from the SoC. Request the required pin config.
The clock itself should also be CLK_SAI2_MCLKOUT_TO_IO for the sound to
work (otherwise there is only silence out of the audio out jack).
Fixes: 96cbdfdd3a ("arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-2-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd8967ea31 upstream.
The Device Tree specification specifies[1] that
"""
Each node in the devicetree is named according to the following
convention:
node-name@unit-address
[...]
The unit-address must match the first address specified in the reg
property of the node.
"""
The first address in the reg property is fdaXa000 and not fdaX9000. This
is likely a copy-paste error as the IOMMU for core0 has two entries in
the reg property, the first one being fdab9000 and the second fdaba000.
Let's fix this oversight to match what the spec is expecting.
[1] https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf 2.2.1 Node Names
Fixes: a31dfc060a ("arm64: dts: rockchip: Add nodes for NPU and its MMU to rk3588-base")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20251215-npu-dt-node-address-v1-1-840093e8a2bf@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5497ffe305 upstream.
Previously sometimes pressing the volume-down button would register as
a volume-up button. Match the thresholds as shown in the Pinephone Pro
schematic.
Tests:
~ $ evtest
// Mashed the volume down ~100 times with varying intensity
Event: time xxx, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 1
Event: time xxx, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 0
// Mashed the volume up ~100 times with varying intensity
Event: time xxx, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1
Event: time xxx, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0
Fixes: d3150ed535 ("arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251124-ppp_light_accel_mag_vol-down-v5-4-f9a10a0a50eb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0368e4afcf upstream.
Shawn Lin from Rockchip strongly discourages attempts to use their
RK3399 PCIe core at 5.0 GT/s speed, citing concerns about catastrophic
failures that may happen. Even if the odds are low, drop from last user
of this non-default property for the RK3399 platform, helios64 board
dts.
Fixes: 755fff528b ("arm64: dts: rockchip: add variables for pcie completion to helios64")
Link: https://lore.kernel.org/all/e8524bf8-a90c-423f-8a58-9ef05a3db1dd@rock-chips.com/
Cc: stable@vger.kernel.org
Reported-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/43bb639c120f599106fca2deee6c6599b2692c5c.1763415706.git.geraldogabriel@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aabc977aa4 upstream.
Update the ranges property for the flexcom9 as per the datasheet and
align with the reg property.
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e351836a54 upstream.
In commit aef30c8d56 ("genirq: Warn about using IRQF_ONESHOT without a
threaded handler")[1], it will check IRQF_ONESHOT flag in IRQ request,
and gives a warning if there is no threaded handler. Drop this flag to
fix this warning.
Link: https://lore.kernel.org/r/20260112134013.eQWyReHR@linutronix.de/ [1]
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260122-05-k1-i2c-irq-v1-1-9b8d94bbcd22@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901a5f309d upstream.
Memory allocated for struct vscsiblk_info in scsiback_probe() is not
freed in scsiback_remove() leading to potential memory leaks on remove,
as well as in the scsiback_probe() error paths. Fix that by freeing it
in scsiback_remove().
Cc: stable@vger.kernel.org
Fixes: d9d660f6e5 ("xen-scsiback: Add Xen PV SCSI backend driver")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20251223063012.119035-1-nihaal@cse.iitm.ac.in
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9eacec5d18 upstream.
The Hyper-V host does not support MODE_SENSE_10 and MODE_SENSE. The
driver handles MODE_SENSE as unsupported command, but not for
MODE_SENSE_10. Add MODE_SENSE_10 to the same handling logic and return
correct code to SCSI layer.
Fixes: 89ae7d7093 ("Staging: hv: storvsc: Move the storage driver out of the staging area")
Cc: stable@kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260117010302.294068-1-longli@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2934325f56 upstream.
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19a5d9ba62 upstream.
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f40ddcc0c0 upstream.
This reverts commit 068648aab7.
NFC packets may have NUL-bytes. Checking for string length is not a correct
assumption here. As long as there is a check for the length copied from
copy_from_user, all should be fine.
The fix only prevented the syzbot reproducer from triggering the bug
because the packet is not enqueued anymore and the code that triggers the
bug is not exercised.
The fix even broke
testing/selftests/nci/nci_dev, making all tests there fail. After the
revert, 6 out of 8 tests pass.
Fixes: 068648aab7 ("nfc/nci: Add the inconsistency check between the input data length and count")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20260113202458.449455-1-cascardo@igalia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc8f92e41e upstream.
In w1_attach_slave_device(), if __w1_attach_slave_device() fails,
put_device() -> w1_slave_release() is called to do the cleanup job.
In w1_slave_release(), sl->family->refcnt and sl->master->slave_count
have already been decremented. There is no need to decrement twice
in w1_attach_slave_device().
Fixes: 2c927c0c73 ("w1: Fix slave count on 1-Wire bus (resend)")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251218111414.564403-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 761fcf46a1 upstream.
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code.
Cc: stable@vger.kernel.org
Fixes: e2c94d6f57 ("w1_therm: adding alarm sysfs entry")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251216145007.44328-2-thorsten.blum@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e03b29b55f upstream.
Some of the hardware registers of the DMM-32-AT board are multiplexed,
using the least significant two bits of the Miscellaneous Control
register to select the function of registers at offsets 12 to 15:
00 => 8254 timer/counter registers are accessible
01 => 8255 digital I/O registers are accessible
10 => Reserved
11 => Calibration registers are accessible
The interrupt service routine (`dmm32at_isr()`) clobbers the bottom two
bits of the register with value 00, which would interfere with access to
the 8255 registers by the `dm32at_8255_io()` function (used for Comedi
instruction handling on the digital I/O subdevice).
Make use of the generic Comedi device spin-lock `dev->spinlock` (which
is otherwise unused by this driver) to serialize access to the
miscellaneous control register and paged registers.
Fixes: 3c501880ac ("Staging: comedi: add dmm32at driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260112162835.91688-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32f37e5758 upstream.
Revert commit bfc467db60 ("serial: remove redundant
tty_port_link_device()") because the tty_port_link_device() is not
redundant: the tty->port has to be confured before we call
uart_configure_port(), otherwise user-space can open console without TTY
linked to the driver.
This tty_port_link_device() was added explicitly to avoid this exact
issue in commit fb2b90014d ("tty: link tty and port before configuring
it as console"), so offending commit basically reverted the fix saying
it is redundant without addressing the actual race condition presented
there.
Reproducible always as tty->port warning on Qualcomm SoC with most of
devices disabled, so with very fast boot, and one serial device being
the console:
printk: legacy console [ttyMSM0] enabled
printk: legacy console [ttyMSM0] enabled
printk: legacy bootconsole [qcom_geni0] disabled
printk: legacy bootconsole [qcom_geni0] disabled
------------[ cut here ]------------
tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver!
WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1
Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Qualcomm Technologies, Inc. Eliza (DT)
...
tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P)
tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3))
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:962)
vfs_open (fs/open.c:1094)
do_open (fs/namei.c:4634)
path_openat (fs/namei.c:4793)
do_filp_open (fs/namei.c:4820)
do_sys_openat2 (fs/open.c:1391 (discriminator 3))
...
Starting Network Name Resolution...
Apparently the flow with this small Yocto-based ramdisk user-space is:
driver (qcom_geni_serial.c): user-space:
============================ ===========
qcom_geni_serial_probe()
uart_add_one_port()
serial_core_register_port()
serial_core_add_one_port()
uart_configure_port()
register_console()
|
| open console
| ...
| tty_init_dev()
| driver->ports[idx] is NULL
|
tty_port_register_device_attr_serdev()
tty_port_link_device() <- set driver->ports[idx]
Fixes: bfc467db60 ("serial: remove redundant tty_port_link_device()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260123072139.53293-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27aff0a56b upstream.
Fintek F81504/508/512 can support both RTS_ON_SEND and RTS_AFTER_SEND,
but pci_fintek_rs485_supported only announces the former.
This makes it impossible to unset SER_RS485_RTS_ON_SEND from
userspace because of uart_sanitize_serial_rs485(). Some devices
with these chips need RTS low on TX, so they are effectively broken.
Fix this by announcing the support for SER_RS485_RTS_AFTER_SEND,
similar to commit 068d35a7be ("serial: sc16is7xx: announce support
for SER_RS485_RTS_ON_SEND").
Fixes: 4afeced55b ("serial: core: fix sanitizing check for RTS settings")
Cc: stable <stable@kernel.org>
Signed-off-by: Marnix Rijnart <marnix.rijnart@iwell.eu>
Link: https://patch.msgid.link/20260112000931.61703-1-marnix.rijnart@iwell.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5dc6975566 ]
S1G beacons don't contain the DA field as per IEEE80211-2024 9.3.4.3,
so the DA broadcast check reads the SA address of the S1G beacon which
will subsequently lead to the beacon being dropped. As a result, passive
scanning is not possible. Fix this by only performing the check on
non-S1G beacons to allow S1G long beacons to be processed during a
passive scan.
Fixes: ddf82e752f ("wifi: mac80211: Allow beacons to update BSS table regardless of scan")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260120031122.309942-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2397e92646 ]
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs.
Fixes: 104880a6b4 ("crypto: authencesn - Convert to new AEAD interface")
Reported-By: Taeyang Lee <0wn@theori.io>
Signed-off-by: Taeyang Lee <0wn@theori.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d837fbee92 ]
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50da4b9d07 ]
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9b218a15 ]
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3ba321624 ]
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths.
Fixes: 8230819494 ("ipvlan: use per device spinlock to protect addrs list updates")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63faf32666 ]
The sizeof_wfhw field wasn't populated in max7360_pwm_ops so it was set
to 0 by default.
While this is ok for now because:
sizeof(struct max7360_pwm_waveform) < PWM_WFHWSIZE
in the future, if struct max7360_pwm_waveform grows, it could lead to
stack corruption.
Fixes: d93a75d94b ("pwm: max7360: Add MAX7360 PWM support")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://patch.msgid.link/20260113163907.368919-1-richard.genoud@bootlin.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c198b7773c ]
copy_to_user() returns the number of bytes not copied, thus if there is
a problem a positive number. However the ioctl callback is supposed to
return a negative error code on error.
This error is a unfortunate as strictly speaking it became ABI with the
introduction of pwm character devices. However I never saw the issue in
real life -- I found this by code inspection -- and it only affects an
error case where readonly memory is passed to the ioctls or the address
mapping changes while the ioctl is active. Also there are already error
cases returning negative values, so the calling code must be prepared to
see such values already.
Fixes: 9c06f26ba5 ("pwm: Add support for pwmchip devices for faster and easier userspace access")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260119151325.571857-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b47adaab8b ]
In veth_get_ethtool_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics, peer_tq_xdp_xmit and
peer_tq_xdp_xmit_err, are already accumulated by veth_xdp_xmit(). Fix
this by reading them into a temporary buffer first.
Fixes: 5fe6e56776 ("veth: rely on peer veth_rq for ndo_xdp_xmit accounting")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260114122450.227982-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a9bc9e3f4 ]
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO.
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158f985cf ]
On the receive path, packet can be damaged because of buffer
overflow in Rx FIFO. Avoid misleading per-packet error log when
packet->errors is set, this can flood the log. Instead, rely on the
standard rtnl_link_stats64 stats.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a80c9d945a ]
A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key
initialization fails:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2
RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline]
RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401
Call Trace:
sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189
sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111
sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217
sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052
sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88
sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243
sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127
The issue is triggered when sctp_auth_asoc_init_active_key() fails in
sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the
command sequence is currently:
- SCTP_CMD_PEER_INIT
- SCTP_CMD_TIMER_STOP (T1_INIT)
- SCTP_CMD_TIMER_START (T1_COOKIE)
- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)
- SCTP_CMD_ASSOC_SHKEY
- SCTP_CMD_GEN_COOKIE_ECHO
If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while
asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by
SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL
to be queued by sctp_datamsg_from_user().
Since command interpretation stops on failure, no COOKIE_ECHO should been
sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already
been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As
a result, the DATA chunk can be transmitted together with the COOKIE_ECHO
in sctp_outq_flush_data(), leading to the observed issue.
Similar to the other places where it calls sctp_auth_asoc_init_active_key()
right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY
immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting
T1_COOKIE. This ensures that if shared key generation fails, authenticated
DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,
giving the client another chance to process INIT_ACK and retry key setup.
Fixes: 730fc3d05c ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Zhen Chen <chenzhen126@huawei.com>
Tested-by: Zhen Chen <chenzhen126@huawei.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/44881224b375aa8853f5e19b4055a1a56d895813.1768324226.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a6d1bfe1 ]
In commit 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message.
Fixes: 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260110223836.3890248-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260116-can_usb-fix-reanchor-v1-1-9d74e7289225@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74c7a58ca ]
In ucc_geth's .mac_config(), we configure the TBI Serdes block represented by a
struct phy_device that we get from firmware.
While porting to phylink, a check was missed to make sure we don't try
to access the TBI PHY if we can't get it. Let's add it and return early
in case of error
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130843.rFGNXA5a-lkp@intel.com/
Fixes: 53036aa8d0 ("net: freescale: ucc_geth: phylink conversion")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260114080247.366252-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f5f148dd7 ]
Currently, the test breaks if the SUT already has a default route
configured for IPv6. Fix by avoiding the use of the default namespace.
Fixes: 4ed591c8ab ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260113-selftests-net-fib-onlink-v2-1-89de2b931389@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
