Add power-chassis-control and power-chassis-power for phosphor-power.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These are not specified in the binding and produce warnings such as
the following:
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:254.27-262.5: Warning
(avoid_unnecessary_addr_size): /ahb/ethernet@1e670000: unnecessary
#address-cells/#size-cells without "ranges", "dma-ranges" or child
"reg" property
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:264.27-272.5: Warning
(avoid_unnecessary_addr_size): /ahb/ethernet@1e690000: unnecessary
#address-cells/#size-cells without "ranges", "dma-ranges" or child
"reg" property
arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dtb: ethernet@1e660000:
Unevaluated properties are not allowed ('#address-cells', '#size-cells'
were unexpected)
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-7-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Many platforms were specifying the `aspeed,external-nodes` property
required by the AST2500 pinctrl. However, its been specified in the
pinctrl node directly in aspeed-g5.dtsi for quite a long time now.
Remove the unnecessary override from all relevant platform dts files.
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-5-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
There's no binding defined for the device, so remove it from the
devicetrees until someone has the motivation to write one.
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb:
/ahb/apb@1e6e0000/xdma@1e6e7000: failed to match any schema with
compatible: ['aspeed,ast2500-xdma']
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-4-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The ASPEED CVIC binding documents `aspeed,cvic` as the required generic
compatible, but the devicetrees contained `aspeed-cvic`. Update the
devictrees to use `aspeed,cvic` as documented and as required by
the driver implementation. Presumably the bug was the result of some
incoherent thoughts while removing the SoC name at the time of
writing.
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-2-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Squash schema warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb:
copro-interrupt-controller@1e6c2000: $nodename:0:
'copro-interrupt-controller@1e6c2000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-1-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add LED nodes as the gpio-leds devices. They are led-bmc-ready,
led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the BMC I2C10.
Enable the BMC I2C15 and add the GPIO Expander as a child node.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-5-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Define the I2C alias ports for the riser cards.
Add the i2c muxes to switch to the i2c alias ports and
the eeprom nodes to read the FRU contents on riser cards.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-4-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the I2C alias ports to read temperature sensors via channels
of the I2C muxes.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-3-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Define I2C alias ports from I2C Switch 0x70 at BMC I2C5.
Add the tmp421 sensors via the I2C alias ports as OCP device
temperature sensors.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-2-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add linux device tree entry for Meta(Facebook) Catalina compute-tray
BMC using AT2600 SoC.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Document the new compatibles used on Meta Catalina.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-1-286bfd2ab93b@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Switch the i2c bus number to map the i2c tag according to the hardware
design.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-15-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change the RTC reference from on-chip to externel on i2c bus 9 and address
is 0x51.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-5-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Revise the address of tmp75 on I2C bus 1 from 0x48 to 0x4f due to design
change.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-2-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Changed temperature sensor monitor chip from tmp423 to tmp432
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20240605160604.2135840-1-ninad@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the device tree for the new BMC system. The Fuji is a P11
system with eight processors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-17-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The 4U Blueridge is identical to the Blueridge system but has two extra
power supplies.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-16-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the device tree for the new BMC system. The Blueridge is a
P11 system with four processors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-15-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the P11 FSI device tree for use in upcoming BMC systems.
Unlike P10, there is no system with only two processors, so
only the quad processor FSI layout is necessary.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-14-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Document two new AST2600 BMC boards for IBM P11 systems.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240522192524.3286237-13-eajames@linux.ibm.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts, which
is an error with the latest Clang
-----BEGIN PGP SIGNATURE-----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=HYew
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
-----BEGIN PGP SIGNATURE-----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=0y6/
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
