jbd2_transaction_committed() is used to check whether a transaction with
the given tid has already committed, it holds j_state_lock in read mode
and check the tid of current running transaction and committing
transaction, but holding the j_state_lock is expensive.
We have already stored the sequence number of the most recently
committed transaction in journal t->j_commit_sequence, we could do this
check by comparing it with the given tid instead. If the given tid isn't
smaller than j_commit_sequence, we can ensure that the given transaction
has been committed. That way we could drop the expensive lock and
achieve about 10% ~ 20% performance gains in concurrent DIOs on may
virtual machine with 100G ramdisk.
fio -filename=/mnt/foo -direct=1 -iodepth=10 -rw=$rw -ioengine=libaio \
-bs=4k -size=10G -numjobs=10 -runtime=60 -overwrite=1 -name=test \
-group_reporting
Before:
overwrite IOPS=88.2k, BW=344MiB/s
read IOPS=95.7k, BW=374MiB/s
rand overwrite IOPS=98.7k, BW=386MiB/s
randread IOPS=102k, BW=397MiB/s
After:
overwrite IOPS=105k, BW=410MiB/s
read IOPS=112k, BW=436MiB/s
rand overwrite IOPS=104k, BW=404MiB/s
randread IOPS=111k, BW=432MiB/s
CC: Dave Chinner <david@fromorbit.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/linux-ext4/ZjILCPNZRHeazSqV@dread.disaster.area/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240520131831.2910790-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After calling the ext4_da_map_blocks(), a delalloc extent state could
be identified through the EXT4_MAP_DELAYED flag in map. So factor out
buffer_head related handles in ext4_da_map_blocks(), make this function
buffer_head unaware and becomes a common helper, and also update the
stale function commtents, preparing for the iomap da write path in the
future.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-11-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_insert_delayed_block() to ext4_insert_delayed_blocks(),
pass length parameter to make it insert multiple delalloc blocks at a
time. For non-bigalloc case, just reserve len blocks and insert delalloc
extent. For bigalloc case, we can ensure that the clusters in the middle
of a extent must be unallocated, we only need to check whether the start
and end clusters are delayed/allocated. We should subtract the space for
the start and/or end block(s) if they are allocated.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-10-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out a common helper ext4_clu_alloc_state(), check whether the
cluster containing a delalloc block to be added has been allocated or
has delalloc reservation, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add 'nr_resv' parameter to ext4_da_reserve_space(), which indicates the
number of clusters wants to reserve, make it reserve multiple clusters
at a time.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_es_insert_delayed_block() to ext4_es_insert_delayed_extent()
and pass length parameter to make it insert multiple delalloc blocks at
a time. For the case of bigalloc, split the allocated parameter to
lclu_allocated and end_allocated. lclu_allocated indicates the
allocation state of the cluster which is containing the lblk,
end_allocated indicates the allocation state of the extent end, clusters
in the middle of delay allocated extent must be unallocated.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The start block of the delalloc extent to be inserted is equal to
map->m_lblk, just drop the duplicate iblock input parameter.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_da_map_blocks(), we could find four kind of extents in the
extent status tree: hole, unwritten, written and delayed extent. Now we
only trim the map len if we found an unwritten extent or a written
extent. This is okay now since map->m_len is always set to one and we
always insert one delayed block at a time. But this will become isn't
okay for other two cases if ext4_insert_delayed_block() and
ext4_da_map_blocks() support inserting multiple map->len blocks later.
1. If we found a hole in the extent status tree which es->es_len is
shorter than the length we want to write, we should trim the
map->m_len to prevent adding extra delay more blocks than we
expected. For example, assume we write data [A, C) to a file that
contains a hole extent [A, B) and a written extent [B, D) in the
cache.
A B C D
before da write: ...hhhhhh|wwwwww....
Then we will get extent [A, B), we should trim map->m_len to B-A
before inserting new delalloc blocks, if not, the range [B, C) will
be duplicated.
2. If we found a delayed extent in the extent status tree which
es->es_len is shorter than the length we want to write, we should
trim the map->m_len to es->es_len and return directly since the front
part of this map has been delayed, we can't insert the delalloc
extent that contains the latter part in this round, we should return
the delayed length and the caller should increase the position and
call ext4_da_map_blocks() again. For example, assume we write data
[A, C) to a file that contains a delayed extent [A, B) in the cache.
A B C
before da write: ...dddddd|hhh....
Then we will get delayed extent [A, B), we should also trim map->m_len
to B-A and return, if not, we will incorrectly assume that the write
is complete and won't insert [B, C).
So we need to always trim the map->m_len if the found es->es_len in the
extent status tree is shorter than the map->m_len, prearing for
inserting a extent with multiple delalloc blocks. This patch only does a
pre-fix, the handle is crude and ext4_da_map_blocks() deserve a cleanup,
we will do that later.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The per-inode i_reserved_data_blocks count the reserved delalloc blocks
in a regular file, it should be zero when destroying the file. The
per-fs s_dirtyclusters_counter count all reserved delalloc blocks in a
filesystem, it also should be zero when umounting the filesystem. Now we
have only an error message if the i_reserved_data_blocks is not zero,
which is unable to be simply captured, so add WARN_ON_ONCE to make it
more visable.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_da_map_blocks looks up for any extent entry in the extent status
tree (w/o i_data_sem) and then the looks up for any ondisk extent
mapping (with i_data_sem in read mode).
If it finds a hole in the extent status tree or if it couldn't find any
entry at all, it then takes the i_data_sem in write mode to add a da
entry into the extent status tree. This can actually race with page
mkwrite & fallocate path.
Note that this is ok between
1. ext4 buffered-write path v/s ext4_page_mkwrite(), because of the
folio lock
2. ext4 buffered write path v/s ext4 fallocate because of the inode
lock.
But this can race between ext4_page_mkwrite() & ext4 fallocate path
ext4_page_mkwrite() ext4_fallocate()
block_page_mkwrite()
ext4_da_map_blocks()
//find hole in extent status tree
ext4_alloc_file_blocks()
ext4_map_blocks()
//allocate block and unwritten extent
ext4_insert_delayed_block()
ext4_da_reserve_space()
//reserve one more block
ext4_es_insert_delayed_block()
//drop unwritten extent and add delayed extent by mistake
Then, the delalloc extent is wrong until writeback and the extra
reserved block can't be released any more and it triggers below warning:
EXT4-fs (pmem2): Inode 13 (00000000bbbd4d23): i_reserved_data_blocks(1) not cleared!
Fix the problem by looking up extent status tree again while the
i_data_sem is held in write mode. If it still can't find any entry, then
we insert a new da entry into the extent status tree.
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out a new common helper ext4_map_query_blocks() from the
ext4_da_map_blocks(), it query and return the extent map status on the
inode's extent path, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem!
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240515082857.32730-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We only need to sleep if no running transaction is expired. Simply remove
unnecessary "should_sleep".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always set JBD2_UNMOUNT with j_state_lock held in journal_kill_thread.
In kjournald2, we check JBD2_UNMOUNT flag two times under the same
j_state_lock. Then the second check is unnecessary.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The j_commit_[sequence/request] are updated with j_state_lock held during
runtime. In kjournald2, two equality checks of j_commit_[sequence/request]
are under the same j_state_lock, then the second check is unnecessary.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We save jh2bh(jh_in) to bh_in, so use bh_in directly instead of
jh2bh(jh_in) to simplify the code.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The data to do escape could be accessed directly from b_frozen_data,
just remove unneeded kmap.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If b_frozen_data is created concurrently, we can update new_folio and
new_offset with b_frozen_data and then move forward
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we only need to copy out when we should do escape, need_copy_out
could be simply replaced by "do_escape".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The done_copy_out info from jbd2_journal_write_metadata_buffer is not
used. Simply remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The new_bh is from alloc_buffer_head, we should call free_buffer_head to
free it in error case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240514112438.1269037-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
new_node is assigned first, so it does not need to initialize the
assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20240402022300.25858-1-zeming@nfschina.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
is not defined as well documentation fixes to start using inclusive
terminology. The drivers get paths in DT bindings fixed as well as
proper interrupt handling for the ocores driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmZ31U4ACgkQFA3kzBSg
KbYgMg/9Ew5g86A9u1BBiCytjzNXIrNNbL1rm7GsHH4elq5h+Pa2jS1AZjHB1ZtC
8KwogPvUeqJyzmO6SEzJVoDq8B4QIUGS7QFadqhKSNScO60MNfRmHXiOPoIXMNkS
pws3oquqM3BDdfvqtod1KFkVKsfok+UlDcOXmGJLKNzoBaBfZWHwGVBEW1E1xdLt
PrimxsIzMWNySmWimTf1nQl5Ah3gzcB79SdQFvqU50dGmscF4fAd7BirjNktrgJB
E45jD5341U2xb1pCEtsfgwyvJiul//Cx/iHneCiu/EvVelZjl/WG1lNu5DYpOzmU
oqhqkZJw3o0G3W8dK/CjyGlp8MsbQJoa2qSGA2V+1ZtQyj09wM727qhRMkFvqsRH
moTTNx2+KcSWrvjjXMvC2oht/rfKYbLzFSqzDiRzmphfgFjPQKDCL6EVoyQwvOYD
LpFRKyhSMTR/OpHfpdES+VQwvcvfmk5wHHQu5kl956bec63buIj0cFLiaAxiJR3v
HhsCeX+BCp5+3z15+/x2vnKPzNAmS8oc0ZOGiN3W8qYUBpv1GjwLXuEDNLKCXf+W
6xlTCb+lNTSR2m3R2me1fI0iuFQW5nLT6t3T/mGbNLu4xJ79Wq0rLRXpMxJQDnf7
XB+251eg2BOTe0Qbi015NUNF2LbVblsxz8n9pqYaRsF+bVyaiO0=
=T67e
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
-----BEGIN PGP SIGNATURE-----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=TIGs
-----END PGP SIGNATURE-----
Merge tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Five smb3 client fixes
- three nets/fiolios cifs fixes
- fix typo in module parameters description
- fix incorrect swap warning"
* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Move the 'pid' from the subreq to the req
cifs: Only pick a channel once per read request
cifs: Defer read completion
cifs: fix typo in module parameter enable_gcm_256
cifs: drop the incorrect assertion in cifs_swap_rw()
Use numa_valid_node() function to verify that nid is a valid node ID
instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmZ3vm8QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kV6DB/41uPq1Dr2hk8ZtBEyaZg/XTA1WU8rc95PY
NqnWsrV1MjNt7ve2vBhZtirI+x8QIkpa/WV4y1qma2iBju1bOzkOw1o3VBwSeFMi
hTyLK9IFbJi9bF8xk4Lp/Km0VagpCAJLdWFdxzQCvtUfN2AZHNA+s3nk8VQIjnyj
glY7fdl9j6vtCRkT/5F0tETF8RfaoMuldwJGSIVjCQIk2oBkcPKnWcG4UQaVs2mP
F0UPQtNJxL+NCk/VGccsWhXONJ7amHK+Qq6xWZaC9MLAaoRAXDg05/S+t2m1iZxt
3HNBtrSPagNo7xTDsZ4sF+z+3YFk18QWKykRs2XXNfAapF6Ox2vs
=vZLS
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix fragility in checks for unset node ID.
Use numa_valid_node() function to verify that nid is a valid node
ID instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES"
* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use numa_valid_node() helper to check for invalid node ID
- A randconfig build fix for the VMware virtual GPU driver
-----BEGIN PGP SIGNATURE-----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=WXpS
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- An ARM-relevant fix to not free default RMIDs of a resource control
group
- A randconfig build fix for the VMware virtual GPU driver
* tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't try to free nonexistent RMIDs
drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZnaUpBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1u6eEA+QHGf5qPM6Vyvma4kuqjMolbaAZ3
7J35Bk2b6OvbQu/BAQDI4VIpHZiTP3wEuC7tZBraPT3jjh5hba/BeiWkgEPBBg==
=RueN
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ2+14ACgkQJNaLcl1U
h9AliQf9EXOZ1mUnCRP5MrWC6hBkgKnL16wQhwJYhk7GreKlehKLNi389qbDrYii
aUbb5fIxE39PEQvDuBG5cJtIW8P5bPO5TqJD/9LcW5lDqoFGIyFLfOlYui8bgDLH
OW0FRa3imDiLKyKaGeu70Dr06VzikndInMQ7MitutXxS6/u4jGE8AQ3fh1YXl6fB
iV7uj8DFTpIg/fHsFYS2elVhvd6NRR3EkFnXvYrGvrLwnv4o+vd21G29L0lVxEUW
VMDfxKRok59xSNHzMEkrbS5BcGWyDMXkMXEpS9jjS8gazHv/wcJ5JWPMQx40g4FQ
y6zoIjfJgYYRK3FEPbKV/hidLC8ZBA==
=5kHA
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees"
* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
regulator: bd71815: fix ramp values
regulator: core: Fix modpost error "regulator_get_regmap" undefined
regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594
A number of fixes that have built up for SPI, a bunch of driver specific
ones including an unfortunate revert of an optimisation for the i.MX
driver which was causing issues with some configurations, plus a couple
of core fixes for the rarely used octal mode and for a bad interaction
between multi-CS support and target mode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ2+ekACgkQJNaLcl1U
h9DD8Af/fGg7Sf7Ajt8IVI4D33+4SujFWHmu0ELgZVS4k7i+BpiZFJwHpKsfX0eN
I1/gVq5K6SJc1n1kiR2z2xCGD4JL0uqwk8y6QhARGnwQUVNrcsrM6TvT9N8uRelB
tEoCfDu8Wj2KNLHn5v4LL4uNnIEBamOHbRVTVq62JcXawgVZiiLQT436APXaS7uq
JstmiaiRzFVSQfoU2SBpbvXwp8QjqeV3l02DKwaafpoiMpccaUz2TNAXytXysHkE
h3je8uFMU+yYqK3G8t9HQQQema3GHFi1NtK472TDQe3FxZr8IzW6Gy/iFRArcSZV
rVEP07Q/X5OlK5LAs/hFbl+sEzkYbw==
=8xay
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
- Fix crashes triggered by administrative operations on the server
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmZ2/VgACgkQM2qzM29m
f5d+tA/+OoNtrNfaGrrXjmKte0eLLQzX4o1IbvQPcydqEQwHFIpCNXGQXdzrjYzg
ChICf2/IKH7Dl9dOTp0QMsZbTnGORDHcImjaWBck//ObYopLOk8e+pJs2VypX+uE
O5gIFnpFapP2IZRFiEolzOx5x73wWE7/tJYMzL5sDsV/bHavIR3abH/hBkF/1E7N
wSCcZuBfGm0pRWJS+KI8Bwa+dVbpq80Y8ITZ3S+gQEH0nHTEw9VxpmV0oQjQinV5
aCBegPXSBDuc2SX7KNLoHVqVX9x/htAnV5BcjbViEqhyakoa+ANIJb7LaOx/lZ2J
9CB1lP1FPmw0AVwu4krvdnJncIGlZJPEK7eLv5cAaxNK6jb48Gv0pul5tvMphEym
+6qw0bqalXvsvoSQFMeidVUvvkDC2fxqHBI0N8w5LVKzbYiv3JUTy3WLt/f6sd0F
nXWgUhYGgMT62KBxyEI0f2ip38Qb2JjRrSWcKXi5D/2TfLgL5GqbRloFmX8nx6+p
9RuYeFFNGzS6qWfYljR41lTgkD0nU0/MF9GiRn+8JvqHrACXi3z9oQ8V5jlye+HW
PrpBvYDqrDMzBiH22H095jtgo7YK+xib87wy9ql4BxrygHCg55czLiSTZliHC1iA
z8dGtwusFayuTaD21FytD00DkVDJQAlsahhQPfyaUOR0mcrWVR4=
=LCB+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix crashes triggered by administrative operations on the server
* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
nfsd: fix oops when reading pool_stats before server is started
* Fix assertion failure due to a race between unlink and cluster buffer
instantiation.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZnF9DgAKCRAH7y4RirJu
9MDAAP4oMBgM45sF7Y579EvUcAxLx01ZIcKy7t8dXmDRTN4C2gD/aECnpkAH2vlF
jzgH28ULTLZjfOPFP6ighlEnpYcqYAk=
=dkdo
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- Fix assertion failure due to a race between unlink and cluster buffer
instantiation.
* tag 'xfs-6.10-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix unlink vs cluster buffer instantiation race
Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible for
the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to correctly
set the bucket data type, which should have been BCH_DATA_need_gc_gens
instead of BCH_DATA_free; this was causing us to go emergency read-only
on a filesystem that had seen heavy enough use to see bucket gen
wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default").
-----BEGIN PGP SIGNATURE-----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=ktka
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible
for the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to
correctly set the bucket data type, which should have been
BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
go emergency read-only on a filesystem that had seen heavy enough use
to see bucket gen wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self
healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default")"
* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Move the ei_flags setting to after initialization
bcachefs: Fix a UAF after write_super()
bcachefs: Use bch2_print_string_as_lines for long err
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
bcachefs: Replace bare EEXIST with private error codes
bcachefs: Fix missing alloc_data_type_set()
closures: Change BUG_ON() to WARN_ON()
bcachefs: fix alignment of VMA for memory mapped files on THP
bcachefs: Fix safe errors by default
bcachefs: Fix bch2_trans_put()
bcachefs: set_worker_desc() for delete_dead_snapshots
bcachefs: Fix bch2_sb_downgrade_update()
bcachefs: Handle cached data LRU wraparound
bcachefs: Guard against overflowing LRU_TIME_BITS
bcachefs: delete_dead_snapshots() doesn't need to go RW
bcachefs: Fix early init error path in journal code
bcachefs: Check for invalid btree IDs
bcachefs: Fix btree ID bitmasks
bcachefs: Fix shift overflow in read_one_super()
bcachefs: Fix a locking bug in the do_discard_fast() path
...
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZnbkiAAKCRDJZDGjmcZN
crNxAP41dBqTGDpMEkNFlXi7L0Xw27mFNm/rHu/wbA7wq2zABAD/fQ9oqT4N6aEI
z3PQ0zdE7w0whTTcqQo8ruQdVYPQqwc=
=FPee
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmZ24fcACgkQj4D7WH0S
/k5qRQf+O/ecsqX8Pd/axIKpdl7JXWlyNbt8AroSLOBUW2BieqtDVMb6sdxJwOyl
xt2EvQtvBe0bfRJyBCQteRoY2CkWEzPZDtpx3B4dqTzavFv3jNTtss/Pg4m+O3w/
pXH3SPtly40+cnwliMoq36warNT0Gv3qSNCeS6sGBGVuheTRxklNZKsEnTgNYVpp
qz2JyiPLTEymQv0fgVvU4bp94oZXhlRMjAcT7T6S6bC1up0dbV1GY1KgdSOEKodI
Wh2AhugiaA6oorHtuTNUGRZ1A2k8fKnHe88MldZXIxt3dWGNh6l2Ut6JSvwQvBMj
4Rxx7NzbnhuRXsTqDKfFs2m8TPhTyQ==
=xmrq
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Three fixes for the pwm-stm32 driver.
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path"
* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix error message to not describe the previous error path
pwm: stm32: Fix calculation of prescaler
pwm: stm32: Refuse too small period requests
There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci
firmware driver and SD card support on the milkv duo riscv
board.
-----BEGIN PGP SIGNATURE-----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=0mtC
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
* Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
* Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
* Allow getting/setting MSRs for SEV-ES guests, if they're using the pre-6.9
KVM_SEV_ES_INIT API.
* Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old routing
table requested that.
Generic:
* Avoid __fls(0)
* Fix reference leak on hwpoisoned page
* Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
* Fix bug in __kvm_handle_hva_range() where KVM calls a function pointer
that was intended to be a marker only (nothing bad happens but kind of
a mine and also technically undefined behavior)
* Do not bother accounting allocations that are small and freed before
getting back to userspace.
Selftests:
* Fix compilation for RISC-V.
* Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
* Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZ1sNwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO8Rwf/ZH+zVOkKdrA0XT71nToc9AkqObPO
mBpV5p+E4boVHSWNQgY7R0yu1ViLc+HotTYf7MoQGeobm60YtDkWHlxcKrQD672C
cLRdl02iRRDGMTRAhpr9jvT/yMHB5kYDxEYmO44nPJKwodcb4/4RJQpt8wyslT2G
uUDpnYMFmSZ8/Zt7IznSEcSx1D+4WFqLT2AZPsJ55w45BFiI+5uRQ/kRaM9iM0+r
yuOQCCK3+pV4CqA+ckbZ6j6+RufcovjEdYCoxLQDOdK6tQTD9aqwJFQ/o2tc+fJT
Hj1MRRsqmdOePdjguBMsfDrEnjXoBveAt96BVheavbpC1UaWp5n0r8p2sA==
=Egkk
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.
Adapt the error message accordingly.
Fixes: d44d635635 ("pwm: stm32: Fix for settings using period > UINT32_MAX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.
One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to
ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301
This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.
Fix the calculation accordingly and adapt the comment to match the new
algorithm.
With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.
Fixes: 8002fbeef1 ("pwm: stm32: Calculate prescaler with a division instead of a loop")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
