GCC 6 will include changes to generated code with -mcmodel=large,
which is used to build kernel modules on powerpc64le. This was
necessary because the large model is supposed to allow arbitrary
sizes and locations of the code and data sections, but the ELFv2
global entry point prolog still made the unconditional assumption
that the TOC associated with any particular function can be found
within 2 GB of the function entry point:
func:
addis r2,r12,(.TOC.-func)@ha
addi r2,r2,(.TOC.-func)@l
.localentry func, .-func
To remove this assumption, GCC will now generate instead this global
entry point prolog sequence when using -mcmodel=large:
.quad .TOC.-func
func:
.reloc ., R_PPC64_ENTRY
ld r2, -8(r12)
add r2, r2, r12
.localentry func, .-func
The new .reloc triggers an optimization in the linker that will
replace this new prolog with the original code (see above) if the
linker determines that the distance between .TOC. and func is in
range after all.
Since this new relocation is now present in module object files,
the kernel module loader is required to handle them too. This
patch adds support for the new relocation and implements the
same optimization done by the GNU linker.
Cc: stable@vger.kernel.org
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a text section starts out with a data blob before the first
function start label, disassembly parsing doing in recordmcount.pl
gets confused on powerpc, leading to creation of corrupted module
objects.
This was not a problem so far since the compiler would never create
such text sections. However, this has changed with a recent change
in GCC 6 to support distances of > 2GB between a function and its
assoicated TOC in the ELFv2 ABI, exposing this problem.
There is already code in recordmcount.pl to handle such data blobs
on the sparc64 platform. This patch uses the same method to handle
those on powerpc as well.
Cc: stable@vger.kernel.org
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recently added OPAL API call, OPAL_CONSOLE_FLUSH, originally took no
parameters and returned nothing. The call was updated to accept the
terminal number to flush, and returned various values depending on the
state of the output buffer.
The prototype has been updated and its usage in the OPAL kmsg dumper has
been modified to support its new behaviour as an incremental flush.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Swapoff after swapping hangs on the G5, when CONFIG_CHECKPOINT_RESTORE=y
but CONFIG_MEM_SOFT_DIRTY is not set. That's because the non-zero
_PAGE_SWP_SOFT_DIRTY bit, added by CONFIG_HAVE_ARCH_SOFT_DIRTY=y, is not
discounted when CONFIG_MEM_SOFT_DIRTY is not set: so swap ptes cannot be
recognized.
(I suspect that the peculiar dependence of HAVE_ARCH_SOFT_DIRTY on
CHECKPOINT_RESTORE in arch/powerpc/Kconfig comes from an incomplete
attempt to solve this problem.)
It's true that the relationship between CONFIG_HAVE_ARCH_SOFT_DIRTY and
and CONFIG_MEM_SOFT_DIRTY is too confusing, and it's true that swapoff
should be made more robust; but nevertheless, fix up the powerpc ifdefs
as x86_64 and s390 (which met the same problem) have them, defining the
bits as 0 if CONFIG_MEM_SOFT_DIRTY is not set.
Fixes: 7207f43665 ("powerpc/mm: Add page soft dirty tracking")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Core kernel expects swp_entry_t to consist of only swap type and swap
offset. We should not leak pte bits into swp_entry_t. This breaks
swapoff which use the swap type and offset to build a swp_entry_t and
later compare that to the swp_entry_t obtained from linux page table
pte. Leaking pte bits into swp_entry_t breaks that comparison and
results in us looping in try_to_unuse.
The stack trace can be anywhere below try_to_unuse() in mm/swapfile.c,
since swapoff is circling around and around that function, reading from
each used swap block into a page, then trying to find where that page
belongs, looking at every non-file pte of every mm that ever swapped.
Fixes: 6a119eae94 ("powerpc/mm: Add a _PAGE_PTE bit")
Reported-by: Hugh Dickins <hughd@google.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support for future IBM Coherent Accelerator (CXL) device
with ID of 0x0601.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some developers really like to have -Werror enabled for their code, as
it helps to ensure warning free code. Others don't want -Werror, as it
(for example) can cause problems when newer (or older) compilers have
different sets of warnings, or new warnings can appear just when turning
up the warning level (e.g., make W=1 or W=2). Thus, it seems prudent to
have the use of -Werror be configurable.
It so happens that cxl is only built on PowerPC, and PowerPC already
has a nice set of Kconfig options for this, under CONFIG_PPC_WERROR. So
let's use that, and the world is a happy place again! (Note that
PPC_WERROR defaults to =y, so the common case compile should still be
enforcing -Werror.)
Fixes: d3d73f4b38 ("cxl: Compile with -Werror")
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC 4.6.3 does not support -Wno-unused-const-variable. Instead, use the
kbuild infrastructure that checks if this options exists.
Fixes: 2cd55c68c0 ("cxl: Fix build failure due to -Wunused-variable behaviour change")
Suggested-by: Michal Marek <mmarek@suse.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to support Power9 we need two new HWCAP bits. We are merging
these ahead of the cputable entry so that glibc can start referring to
them.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
P8+ hardware reports all errors on PE#0. This patch ensures PE#0 is
not assigned to NPU devices so that it can be used for EEH.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The P8+ hardware supports four partitionable endpoints (PEs) however
the hardware reports all errors as occurring on PE#0. This means we
need to reserve this PE for error handling (EEH) and not assign it to
a NPU device, implying that some devices will need to share PEs.
This patch changes the PE assignment for NPU devices such that NPU
devices which connect to the same GPU are assigned to the same
PE#.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The emulated NVLink PCI devices share the same IODA2 TCE tables but only
support a single TVT (instead of the normal two for PCI devices). This
requires the kernel to manually replace windows with either the bypass
or non-bypass window depending on what the driver has requested.
Unfortunately an incorrect optimisation was made in
pnv_pci_ioda_dma_set_mask() which caused updating of some NPU device PEs
to be skipped in certain configurations due to an incorrect assumption
that a NULL peer PE in the array indicated there were no more peers
present. This patch fixes the problem by ensuring all peer PEs are
updated.
Fixes: 5d2aa710e6 ("powerpc/powernv: Add support for Nvlink NPUs")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PCI in powernv now supports quite a bit more than p5ioc2, so remove the
outdated comment.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It has come to my attention that kprobe event stack tracing does not
work on powerpc. You can see with the following:
# cd /sys/kernel/debug/tracing
# echo stacktrace > trace_options
# echo 'p kfree' > kprobe_events
# echo 1 > events/kprobes/enable
Will print the following warning:
save_stack_trace_regs() not implemented yet.
Although save_stack_trace() (which normal event stack traces use) is
implemented, save_stack_trace_regs() which kprobe events use is not.
This is a cheap attempt to implement that function.
Note, This may have issues if a task tries to get a stack trace from
another task with its regs, because it just passes in "current" to
save_context_stack(). But this does solve the issue with stack tracing
kprobe events.
Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 2fc251a8dd ("powerpc: Copy only required pieces of the
mm_context_t to the paca") broke the build for CONFIG_PPC_STD_MMU_64=y
and CONFIG_PPC_MM_SLICES=n.
That only happens for a kernel built with 4K pages and HUGETLB disabled,
which is why we missed it.
Fix it by adding a mm_ctx_user_psize member to the paca and populating
it in the appropriate places.
Fixes: 2fc251a8dd ("powerpc: Copy only required pieces of the mm_context_t to the paca")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Presently when a user-space process issues CXL_IOCTL_START_WORK ioctl we
store the pid of the current task_struct and use it to get pointer to
the mm_struct of the process, while processing page or segment faults
from the capi card. However this causes issues when the thread that had
originally issued the start-work ioctl exits in which case the stored
pid is no more valid and the cxl driver is unable to handle faults as
the mm_struct corresponding to process is no more accessible.
This patch fixes this issue by using the mm_struct of the next alive
task in the thread group. This is done by iterating over all the tasks
in the thread group starting from thread group leader and calling
get_task_mm on each one of them. When a valid mm_struct is obtained the
pid of the associated task is stored in the context replacing the
exiting one for handling future faults.
The patch introduces a new function named get_mem_context that checks if
the current task pointed to by ctx->pid is dead? If yes it performs the
steps described above. Also a new variable cxl_context.glpid is
introduced which stores the pid of the thread group leader associated
with the context owning task.
Reported-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reported-by: Frank Haverkamp <HAVERKAM@de.ibm.com>
Suggested-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix off-by-one error in opal_mce_check_early_recovery() when checking
whether the NIP falls within OPAL space.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A few of the config prompts for powerpc self-tests have periods at the
end, which is inconsistent with the rest of the prompts. Remove the
periods.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only delay opal_rtc_read() when busy and are going to retry.
This has the advantage of possibly saving a massive 10ms off booting!
Kudos to Stewart for noticing.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On BMC machines, console output is controlled by the OPAL firmware and is
only flushed when its pollers are called. When the kernel is in a panic
state, it no longer calls these pollers and thus console output does not
completely flush, causing some output from the panic to be lost.
Output is only actually lost when the kernel is configured to not power off
or reboot after panic (i.e. CONFIG_PANIC_TIMEOUT is set to 0) since OPAL
flushes the console buffer as part of its power down routines. Before this
patch, however, only partial output would be printed during the timeout wait.
This patch adds a new kmsg_dumper which gets called at panic time to ensure
panic output is not lost. It accomplishes this by calling OPAL_CONSOLE_FLUSH
in the OPAL API, and if that is not available, the pollers are called enough
times to (hopefully) completely flush the buffer.
The flushing mechanism will only affect output printed at and before the
kmsg_dump call in kernel/panic.c:panic(). As such, the "end Kernel panic"
message may still be truncated as follows:
>Call Trace:
>[c000000f1f603b00] [c0000000008e9458] dump_stack+0x90/0xbc (unreliable)
>[c000000f1f603b30] [c0000000008e7e78] panic+0xf8/0x2c4
>[c000000f1f603bc0] [c000000000be4860] mount_block_root+0x288/0x33c
>[c000000f1f603c80] [c000000000be4d14] prepare_namespace+0x1f4/0x254
>[c000000f1f603d00] [c000000000be43e8] kernel_init_freeable+0x318/0x350
>[c000000f1f603dc0] [c00000000000bd74] kernel_init+0x24/0x130
>[c000000f1f603e30] [c0000000000095b0] ret_from_kernel_thread+0x5c/0xac
>---[ end Kernel panic - not
This functionality is implemented as a kmsg_dumper as it seems to be the
most sensible way to introduce platform-specific functionality to the
panic function.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we copy the whole mm_context_t to the paca but only access a
few bits of it. This is wasteful of space paca and also takes quite
some time in the hot path of context switching.
This patch pulls in only the required bits from the mm_context_t to
the paca and on context switch, copies only those.
Benchmarking this (On top of Anton's recent MSR context switching
changes [1]) using processes and yield shows an improvement of almost
3% on POWER8:
http://ozlabs.org/~anton/junkcode/context_switch2.c
./context_switch2 --test=yield --process 0 0
1. https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-October/135700.html
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Rename paca fields to be mm_ctx_foo rather than context_foo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Also add nodes and properties for thermal management support. Meanwhile
preprocessor support is needed using thermal of framework.
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Also add nodes and properties for thermal management support. Meanwhile
preprocessor support is needed using thermal of framework.
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
p1010rdb uses the irq[4:5] for inta and intb to pcie,
it is active-high, so set it.
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
e6500 has threads but does not have TLB write conditional. Thus,
the hugetlb code needs to take the same lock that the normal TLB miss
handlers take, to ensure that the tlbsx and tlbwe are atomic.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Enable TWR_P102x option by default in mpc85xx_basic_defconfig to support
p1025twr board.
Signed-off-by: Pengbo Li <Pengbo.Li@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This code was reworked in commit,
905e75c46d
This change removed the fsl_add_bridge() which originally was above
the addition of the pci_exclude_device function. I think the assumption was that
the pci_exclude_device would prevent changes to the bridge PCI config after
it's been added. It seems it wasn't fully tested on MPC85xx ADS because
if you move the fsl_add_bridge() the pci_exclude_device is set in the machine
description then you can never update the PCI Config since the exclude
prevents it. This disrupts things like DMA.
This issue was extensively debugged by David Beazley.
Cc: xe-kernel@external.cisco.com
Cc: dbeazley@cisco.com
Cc: dwalker@fifo99.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
FMan V3H has 2 different MURAM sizes:
In B4860/4420 the MURAM size is 512KB.
In T4240 and T2080 the MURAM size is 384KB.
The MURAM size in FMan V3H device tree is 384KB.
This patch updates the MURAM size for B4 to 512KB.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
1. Use machine_arch_initcall to hook mpc85xx_common_publish_devices
This can ensure before pcibios_init() is called, pci controllers have
been probed and added to the hose_list.
2. Add a workaround for errata A-005434
For the BSC9132, PEX_PEXIWARn[TRGT] for all windows defaults to 0xF,
which is mapped to CCSRBAR. However, for other products, 0xF is
mapped to the local memory. Therefore, for the BSC9132, any default
PCI Express access to the local memory (DDR) will now access the
CCSRBAR. This patch changes the mapping of targets of inbound windows
PEX_PEXIWARn[TRGT] to the Local address space – 0x0 (from 0xF).
Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Use subsys_initcall to init qe to adapt ARM architecture.
Remove qe_reset from PowerPC platform file.
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
QE and CPM have the same muram, they use the same management
functions. Now QE support both ARM and PowerPC, it is necessary
to move QE to "driver/soc", so move the muram management functions
from cpm_common to qe_common for preparing to move QE code to "driver/soc"
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Use genalloc to manage CPM/QE muram instead of rheap.
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Add new algo for genalloc, it reserve a specific region of
memory
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Bytes alignment is required to manage some special RAM,
so add gen_pool_first_fit_align to genalloc,
meanwhile add gen_pool_alloc_algo to pass algo in case user
layer using more than one algo, and pass data to
gen_pool_first_fit_align(modify gen_pool_alloc as a wrapper)
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This adds a function to copy the mm->context to the paca. This is
only a basic conversion for now but will be used more extensively in
the next patch.
This also adds #ifdef CONFIG_PPC_BOOK3S around this code since it's
not used elsewhere.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cppcheck picked up that there were a couple of missing va_end()
calls in functions using va_start().
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Enable new kernel cpu hotplug functionality by allowing cpu dlpar requests
to be initiated from sysfs.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add the ability to hotplug add cpus via rtas hotplug events by either
specifying the drc index of the CPU to add, or providing a count of the
number of CPUs to add.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add the ability to dlpar remove CPUs via hotplug rtas events, either by
specifying the drc-index of the CPU to remove or providing a count of cpus
to remove.
To remove multiple cpus in a single request we create a list of possible
DR (Dynamic Reconfiguration) cpus and their drc indexes that can be
removed. We can then traverse the list remove each cpu and easily clean
up in any cases of failure.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the cpu dlpar add/remove paths to do better error recovery when
a failure occurs during the add/remove operation.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Re-factor the cpu hotplug code to support doing cpu hotplug completely in
the kernel and using the existing sysfs probe/release interfaces. This
patch pulls out pieces of existing cpu hotplug code into common routines,
dlpar_cpu_add() and dlpar_cpu_remove(), to be used by both interfaces.
There are no functional changes introduced.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No functional changes, this patch is simply a move of the cpu hotplug
code from pseries/dlpar.c to pseries/hotplug-cpu.c. This is in an effort
to consolidate all of the cpu hotplug code in a common place.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When DLPAR adding a CPU we should verify that the CPU does not already
exist. Failure to do so can generate a kernel oops;
[ 9.465585] kernel BUG at arch/powerpc/platforms/pseries/dlpar.c:382!
[ 9.465796] Oops: Exception in kernel mode, sig: 5 [#1]
This oops can be generated by causing a probe to be performed on a cpu
by writing to the sysfs cpu probe file (/sys/devices/system/cpu/probe).
This patch adds a check for the existence of cpu prior to probing the cpu
so userspace doing the wrong thing won't trigger a BUG_ON().
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC476FPE has a different PVR from previous PPC476 processors. The
kexec code checks the PVR in order to correctly setup the MMU. When
the initial support for 476FPE processors was added the corresponding
change in the kexec code was missed. This patch simply adds the check
and solves the following bug on kexec:
kexec: Starting new kernel
Bye!
Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0xee9a50f8
cpu 0x0: Vector: 400 (Instruction Access) at [ee9d7d20]
pc: ee9a50f8
lr: ee9a50e4
sp: ee9d7dd0
msr: 21020
current = 0xee40f000
pid = 960, comm = kexec
enter ? for help
[link register ] ee9a50e4
[ee9d7dd0] c0013748 default_machine_kexec+0x58/0x70 (unreliable)
[ee9d7df0] c0012f04 machine_kexec+0x34/0x40
[ee9d7e00] c00aa1ec kernel_kexec+0x9c/0xb0
[ee9d7e20] c005d704 SyS_reboot+0x1f4/0x220
[ee9d7f40] c000db68 ret_from_syscall+0x0/0x3c
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
