The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this causes
Time-of-Check to Time-of-Use (TOCTOU) race conditions.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251126113542.9968-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add missing temperature and fan sensors to Pro WS TRX50-SAGE WIFI
Also:
- Format VRM names to match the BIOS
- Fix swapped VRM_E and VRM_W entries
Signed-off-by: 小太 <nospam@kota.moe>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251125040140.277756-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
with shared driver data, this leads to Time-of-Check to Time-of-Use
(TOCTOU) race conditions, potentially causing divide-by-zero errors.
Convert the macro to a static function to ensure arguments are evaluated
only once.
Additionally, in fan_div_store, move the reading of the old register
value and the calculation of the minimum limit inside the update lock.
This ensures that the read-modify-write sequence operates on consistent
data, preventing race conditions during fan divider updates.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251124165900.4713-1-hanguidong02@gmail.com
[groeck: Dropped unnecessary line split]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The functions fan1_input_show and fan1_target_show check shared data for
zero before using it as a divisor. These accesses are currently
lockless. If the data changes to zero between the check and the
division, it causes a divide-by-zero error.
Explicitly acquire the update lock around these checks and calculations
to ensure the data remains stable, preventing Time-of-Check to
Time-of-Use (TOCTOU) race conditions.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251124165508.4667-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extends device tree support to include the AST2700 chip variant by
adding its compatible string to the device match table.
The AST2700 PWM/TACH hardware is compatible with the existing driver
implementation used for AST2600.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20251120-upstream_pwm_tach-v3-2-eaa2f9b300a2@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adds support for the AST2700 PWM/Tach controller by extending the
compatible string enumeration in the device tree binding.
The AST2700 PWM/Tach hardware is compatible with the existing binding
schema and requires no additional properties or modifications beyond
the new compatible string.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251120-upstream_pwm_tach-v3-1-eaa2f9b300a2@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macros IN_FROM_REG, TEMP_FROM_REG, and RPM_FROM_REG evaluate their
arguments multiple times. These macros are used in lockless show functions
involving shared driver data, leading to Time-of-Check to Time-of-Use race
conditions.
For example, RPM_FROM_REG checks if a value is 0 or 255, and then uses it
in a division. If the value is modified by another thread to 0 after the
check but before the division, it causes a divide-by-zero error.
Convert these macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), fixing the race conditions.
Adhere to the principle of minimal changes by only converting the specific
macros involved in these lockless contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251120041331.1917570-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The System Management Controller on Apple Silicon devices is responsible
for integrating and exposing the data reported by the vast array of
hardware monitoring sensors present on these devices. It is also
responsible for fan control, and allows users to manually set fan
speeds if they so desire. Add a hwmon driver to expose current,
power, temperature, and voltage monitoring sensors, as well as
fan speed monitoring and control via the SMC on Apple Silicon devices.
The SMC firmware has no consistency between devices, even when they
share an SoC. The FourCC keys used to access sensors are almost
random. An M1 Mac mini will have different FourCCs for its CPU core
temperature sensors to an M1 MacBook Pro, for example. For this
reason, the valid sensors for a given device are specified in a
child of the SMC Devicetree node. The driver uses this information
to determine which sensors to make available at runtime.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://lore.kernel.org/r/20251112-macsmc-subdevs-v5-6-728e4b91fe81@gmail.com
[groeck: Added Documentation to index]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some of the datasheet links contained .pdf suffix which resulted in 404.
This patch updates the links to the correct URLs on Renesas website.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Link: https://lore.kernel.org/r/20251115182908.1357793-1-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace two magic values in ccp_device with
existing constants.
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20251113100024.11103-3-mail@mariuszachmann.de
[groeck: Updated subject to include subsystem/driver]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add error checking when loading temperature channel label defined
in device tree. Handling of error from of_property_read_string()
is inspired by lm90 driver and therefor contain same error string.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20251111144406.7489-1-bruno.thomsen@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The RAA229141A is a digital dual output multiphase (X+Y ≤ 12) PWM
controller designed to be compliant with Intel VR13, VR13.HC, VR14 and
VR14.Cloud specifications, targeting VCORE and auxiliary rails.
The RAA229141A supports the Intel SVID interface along with PMBus V1.3
specifications, making it ideal for controlling the microprocessor core and
system rails in Intel VR13, VR13.HC, VR14 and VR14.Cloud platforms.
Signed-off-by: Jeff Lin <jefflin994697@gmail.com>
Link: https://lore.kernel.org/r/20251106104519.2014853-1-jefflin994697@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a driver for the ST Microelectronics TSC1641 16-bit high-precision
power monitor. The driver supports reading bus voltage, current, power,
and temperature. Sysfs attributes are exposed for shunt resistor and
update interval. The driver integrates with the hwmon subsystem and
supports optional ALERT pin polarity configuration.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Link: https://lore.kernel.org/r/20251105201406.1210856-3-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add binding for the TSC1641 I2C power monitor.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251105201406.1210856-2-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When using the _SMC_KEY macro in switch/case statements, GCC 15.2.1 errors
out with 'case label does not reduce to an integer constant'. Introduce
a new __SMC_KEY macro that can be used instead.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20251025-macsmc-subdevs-v4-5-374d5c9eba0e@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The temperature is not from the die itself but from an NTC. That was
verified with an IR camera. Fix that.
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Link: https://lore.kernel.org/r/20251027202847.119707-1-akemnade@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for dht20 temperature and humidity sensor from Aosong.
Modify aht10 driver to handle different init command for dht20 sensor by
adding init_cmd entry in the driver data. dht20 sensor is compatible with
aht10 hwmon driver with this change.
Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Update maxim-ic.com & maximintegrated.com links to analog.com links.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017163501.11285-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Missing datasheets now available at Analog Devices added.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017161422.4404-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Broken redirects fixed to their proper analog.com links.
Fixes warnings in 'make linkcheckdocs'.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017154755.32105-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver does not perform any locking, does not execute or use any sleep
related functionality, and does not allocate memory. Drop the unnecessary
include files.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver does not perform any locking, does not execute or use any sleep
related functionality, and does not allocate memory. Drop the unnecessary
include files.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver does not perform any locking and thus does not need to
include mutex.h. Drop the unnecessary include file.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
