There could be a scenario when there is too much load on a core
(n number of tasks which is affined) or in a case when multiple
rproc subsystem is going for recovery, they queue their recovery
work to one core so even though subsystem are independent their
recovery will be delayed if one of the subsystem recovery work
is taking more time in completing.
If we make this queue unbounded, the recovery work could be picked
on any cpu. This patch is trying to address this.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1650367554-15510-1-git-send-email-quic_mojha@quicinc.com
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411013656.2517150-1-chi.minghao@zte.com.cn
Use _get_optional as some platforms might not provide the px
and cx regulators. This avoids printing the following for each
unavailable regulator:
[ 4.350229] qcom_q6v5_pas 5c00000.remoteproc: supply cx not found,
using dummy regulator
[ 4.374224] qcom_q6v5_pas 5c00000.remoteproc: supply px not found,
using dummy regulator
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713152835.3848875-1-abel.vesa@linaro.org
When a new remoteproc boots up, send the sysmon state notification
of only running remoteprocs. Sending state of remoteprocs booting
up in parallel can cause a race between SSR clients of the remoteproc
that is booting up and the sysmon notification for the same remoteproc,
resulting in an inconsistency between which state the remoteproc that
is booting up in parallel.
For example - if remoteproc A and B crash one after the other, after
remoteproc A boots up, if the remoteproc A tries to get the state of
remoteproc B before the sysmon subdevice for B is invoked but after
the ssr subdevice of B has been invoked, clients on remoteproc A
might get confused when the sysmon notification indicates a different
state.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-8-git-send-email-quic_sibis@quicinc.com
The SSCTL service comes up after a finite time when the remote Q6 comes
out of reset. Any graceful shutdowns requested during this period will
be a NOP and abrupt tearing down of the glink channel might lead to pending
transactions on the remote Q6 side and will ultimately lead to a fatal
error. Fix this by waiting for the SSCTL service when a graceful shutdown
is requested.
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-7-git-send-email-quic_sibis@quicinc.com
Due to firmware bugs on the Q6 the hardware watchdog irq can be triggered
multiple times. As the remoteproc framework schedules work items for the
recovery process, if the other threads do not get a chance to run before
recovery is completed the proceeding threads will see the state of the
remoteproc as running and kill the remoteproc while it is running. This
can result in various SMMU and NOC errors. This change sets the state of
the remoteproc to offline whenever a watchdog irq is received.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-6-git-send-email-quic_sibis@quicinc.com
Client drivers need to check if coredump is enabled for the rproc before
continuing with coredump generation. This change adds a check in the PAS
driver.
Fixes: 8ed8485c4f ("remoteproc: qcom: Add capability to collect minidumps")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-5-git-send-email-quic_sibis@quicinc.com
device_wakeup_enable() on its own is not capable of setting
device as wakeup capable, it needs to be used in conjunction
with device_set_wakeup_capable(). The device_init_wakeup()
calls both these functions on the device passed.
Fixes: a781e5aa59 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-4-git-send-email-quic_sibis@quicinc.com
The pas driver remaps the entire carveout region using the dev_ioremap_wc()
call, which is then used in the adsp_da_to_va() calls made by the rproc
framework. This change marks the va returned by this call as an iomem va.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-3-git-send-email-quic_sibis@quicinc.com
The initial shutdown request to modem on SM8450 SoCs would start the
decryption process and will keep returning errors until the modem shutdown
is complete. Fix this by retrying shutdowns in fixed intervals.
Err Logs on modem shutdown:
qcom_q6v5_pas 4080000.remoteproc: failed to shutdown: -22
remoteproc remoteproc3: can't stop rproc: -22
Fixes: 5cef9b4845 ("remoteproc: qcom: pas: Add SM8450 remoteproc support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-2-git-send-email-quic_sibis@quicinc.com
MSM8996 follows the rest of MSS devices and requires a vote on MX and CX
power domains. Add corresponding entry to the device data.
Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704162202.819051-1-dmitry.baryshkov@linaro.org
Make the MSS q6v5 remoteproc drivers implement the panic handler
that will invoke a stop to prepare the remoteprocs for post mortem
debugging.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-3-git-send-email-quic_sibis@quicinc.com
Update MBA text logs location/size in IMEM to aid tools extract
them after ramdump collection. The size of the MBA text logs is
pre-determined and limited to 4K.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-2-git-send-email-quic_sibis@quicinc.com
The application processor accessing the dynamically assigned metadata
region after assigning it to the remote Q6 would lead to an XPU violation.
Fix this by un-mapping the metadata region post firmware header copy. The
metadata region is freed only after the modem Q6 is done with fw header
authentication.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652248625-990-1-git-send-email-quic_sibis@quicinc.com
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220428064545.3850057-1-ran.jianping@zte.com.cn
MT8188 SCP has two RISC-V cores and similar to MT8195 with some
differences. The MT8188 SCP doesn't have the l1tcm and fix the
DSP EMI issue on MT8195.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220715051821.30707-3-tinghan.shen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add the compatible for mt8188 SCP to the binding.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220715051821.30707-2-tinghan.shen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7180 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-3-git-send-email-quic_sibis@quicinc.com
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7280 MSS PIL. This also serves as a way to increase
readability.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657020721-24939-2-git-send-email-quic_sibis@quicinc.com
Use the node in the examples that is present in msm8974.dtsi, which uses
proper flags for the interrupts and add required 'xo' clock among
others.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606132324.1497349-1-luca@z3ntu.xyz
The wcnss_get_irq function is expected to return a value > 0 in the
event that an IRQ is succssfully obtained, but it instead returns 0.
This causes the stop and ready IRQs to never actually be used despite
being defined in the device-tree. This patch fixes that.
Fixes: aed361adca ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-2-sireeshkodali1@gmail.com
'smd-edge' property appears in multiple bindings, so split it into one
place which can be re-used. This reduces code duplication and adds
strict schema matching for smd-edge nodes (instead of just
"type:object").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-9-krzysztof.kozlowski@linaro.org
'glink-edge' property appears in multiple bindings, so split it into one
place which can be re-used. This reduces code duplication and adds
strict schema matching for glink-edge nodes (instead of just
"type:object").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-8-krzysztof.kozlowski@linaro.org
The SM8150 if cases for power domains can be merged with another entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-6-krzysztof.kozlowski@linaro.org
Interrupts between variants differ only with presence of last optional
interrupt, so the constraints can be simplified.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-5-krzysztof.kozlowski@linaro.org
SM8350 ADSP Peripheral Image Loader already defines interconnects, so
document the property:
sm8350-hdk.dtb: remoteproc@4080000: 'interconnects' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-4-krzysztof.kozlowski@linaro.org
The core schema already sets a 'ref' for properties ending with 'names'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-3-krzysztof.kozlowski@linaro.org
The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.
Enhance the existing PRU remoteproc driver to support the PRU cores
by using specific compatibles. The initial names for the firmware
images for each PRU core are retrieved from DT nodes, and can be adjusted
through sysfs if required.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220602101920.12504-4-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Update the PRU remoteproc bindings for the PRU cores on AM62x SoCs.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602101920.12504-3-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Re-arrange "compatible" string in alphabetic order to decrease the
chance of conflicts.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220602101920.12504-2-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This patch is for enabling cache in SCP. There is not enough space
on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
and latency is much larger than SRAM, so cache is used to mitigate
the negative effects for performance. We set SCP registers for cache
size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
in SRAM from 0x7bdb0 to 0x3bdb0 for enabling cache.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Tested-by: TingHan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220701121229.22756-2-allen-kh.cheng@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
If CONFIG_DMA_DECLARE_COHERENT is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu- will be failed, like this:
drivers/remoteproc/remoteproc_core.c: In function ‘rproc_rvdev_release’:
./include/linux/dma-map-ops.h:182:42: error: statement with no effect [-Werror=unused-value]
#define dma_release_coherent_memory(dev) (0)
^
drivers/remoteproc/remoteproc_core.c:464:2: note: in expansion of macro ‘dma_release_coherent_memory’
dma_release_coherent_memory(dev);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The return type of function dma_release_coherent_memory in CONFIG_DMA_DECLARE_COHERENT area is void, so in !CONFIG_DMA_DECLARE_COHERENT area it should neither return any value nor be defined as zero.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e61c451476 ("dma-mapping: Add dma_release_coherent_memory to DMA API")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220630123528.251181-1-renzhijie2@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add dma_release_coherent_memory to DMA API to allow dma
user call it to release dev->dma_mem when the device is
removed.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220422062436.14384-2-mark-pk.tsai@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
This function has two paths missing of_node_put().
Fixes: 6e962bfe56 ("remoteproc: imx_rproc: add missing of_node_put")
Fixes: a0ff4aa6f0 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220512045558.7142-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20220605083334.23942-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Highlights:
- Fix hp-wmi regression on HP Omen laptops introduced in 5.18
- Several hardware-id additions
- A couple of other tiny fixes
The following is an automated git shortlog grouped by driver:
barco-p50-gpio:
- Add check for platform_driver_register
gigabyte-wmi:
- Add support for B450M DS3H-CF
- Add Z690M AORUS ELITE AX DDR4 support
hp-wmi:
- Use zero insize parameter only when supported
- Resolve WMI query failures on some devices
platform/mellanox:
- Add static in struct declaration.
- Spelling s/platfom/platform/
platform/x86/intel:
- hid: Add Surface Go to VGBS allow list
- pmc: Support Intel Raptorlake P
- Fix pmt_crashlog array reference
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmKl3+0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zU3wf/YJUH3Obp0kAUssrOxT9QShHH6iFL
Gh6CN38DYLEbV7FNBH/iA+ZW7DSsymQm1M3jj1QYB0Sd2X/hSsUEh2q6F0XNjTKH
X8vVrSRAL+DStpgyKerBJHKpzO3ESUlipmIvR/JuGVHQAylR8ielHvAx+XhA1PKz
8/ezppIa9bxZ1+LwQNPE40jJv+wlNctGrx3TEwqPep3STWWFEjkeYpR+3XIJ4Ads
5P7FXxpM2cRFKBcI9jVIBDMIZulEfkXxBDcLCHOYYitxcpnrFFghn14ys5Exh9zL
pdaVHnlP6pEFpVhCWa/ICpSyrLhNYqTUJ92dyFeakbGBj9QlwnfeceMLAw==
=SaRl
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix hp-wmi regression on HP Omen laptops introduced in 5.18
- Several hardware-id additions
- A couple of other tiny fixes"
* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: hid: Add Surface Go to VGBS allow list
platform/x86: hp-wmi: Use zero insize parameter only when supported
platform/x86: hp-wmi: Resolve WMI query failures on some devices
platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
platform/x86: barco-p50-gpio: Add check for platform_driver_register
platform/x86/intel: pmc: Support Intel Raptorlake P
platform/x86/intel: Fix pmt_crashlog array reference
platform/mellanox: Add static in struct declaration.
platform/mellanox: Spelling s/platfom/platform/
Tetsuo's patch to trigger build warnings if system-wide wq's are flushed
along with a TP type update and trivial comment update.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYqUyqQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQPtAQCQZuNFoWhCtdpjW/MWuGdY1pGGPMVl+60xwvew
Ad8gegD/eoAsXP1XAzJ9Z1BPqr/IxncfOgGGDGHbR1Ll39qLlwE=
=i3Sx
-----END PGP SIGNATURE-----
Merge tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Tetsuo's patch to trigger build warnings if system-wide wq's are
flushed along with a TP type update and trivial comment update"
* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Switch to new kerneldoc syntax for named variable macro argument
workqueue: Fix type of cpu in trace event
workqueue: Wrap flush_workqueue() using a macro
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
-----BEGIN PGP SIGNATURE-----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=ka85
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
-----BEGIN PGP SIGNATURE-----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=mHWJ
-----END PGP SIGNATURE-----
Merge tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Three reconnect fixes, all for stable as well.
One of these three reconnect fixes does address a problem with
multichannel reconnect, but this does not include the additional
fix (still being tested) for dynamically detecting multichannel
adapter changes which will improve those reconnect scenarios even
more"
* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: populate empty hostnames for extra channels
cifs: return errors during session setup during reconnects
cifs: fix reconnect on smb3 mount types
-----BEGIN PGP SIGNATURE-----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=1Lf0
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.
BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
commit be9d73e649 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14a2 ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.
Fix this by using zero insize only if 0x5 error code is returned
Tested on Omen 15 AMD (2020) board ID: 8786.
Fixes: be9d73e649 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:
CreateByteField (Arg1, 0x10, D008)
CreateByteField (Arg1, 0x11, D009)
CreateByteField (Arg1, 0x12, D010)
CreateDWordField (Arg1, 0x10, D032)
CreateField (Arg1, 0x80, 0x0400, D128)
In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)
The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not. This particular
behavior occurs in older BIOS and reproduced in OMEN laptops. Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements. This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.
This patch was tested on several OMEN, Elite, and Zbooks. It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx. No problems were reported when testing on several Elite
and Zbooks notebooks.
Fixes: 4b4967cbd2 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
