flexspi define four mode for sample clock source selection.
Here is the list of modes:
mode 0: Dummy Read strobe generated by FlexSPI Controller and loopback
internally
mode 1: Dummy Read strobe generated by FlexSPI Controller and loopback
from DQS pad
mode 2: Reserved
mode 3: Flash provided Read strobe and input from DQS pad
In default, flexspi use mode 0 after reset. And for DTR mode, flexspi
only support 8D-8D-8D mode. For 8D-8D-8D mode, IC suggest to use mode 3,
otherwise read always get incorrect data.
For DTR mode, flexspi will automatically div 2 of the root clock
and output to device. the formula is:
device_clock = root_clock / (is_dtr ? 2 : 1)
So correct the clock rate setting for DTR mode to get the max
performance.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-4-bb9fe2a01889@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For DTR mode, flexspi need to use DDR LUT command, flexspi will switch
to DDR mode when detect the DDR LUT command.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-3-bb9fe2a01889@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Preparation of supportting DTR mode. In nor suspend, driver will disable
DTR mode, and enable DTR mode back in nor resume. This require the flexspi
driver has the ability to set back to dll override mode in STR mode when
clock rate < 100MHz.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-2-bb9fe2a01889@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extract function nxp_fspi_dll_override(), this is the suggested setting
when clock rate < 100MHz. Just the preparation of supportting DTR mode.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-flexspi-ddr-v2-1-bb9fe2a01889@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the QuadSPI controller found on the SAM9X7 SoC.
This controller does not implement pad calibration. It supports
operation up to 100 MHz, and requires the GCK to run at twice
the data rate.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://patch.msgid.link/20250908-microchip-qspi-v2-4-8f3d69fdd5c9@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce capability flags for SoC-specific variations of the QuadSPI
controller:
- has_padcalib: controller supports pad calibration
- has_2xgclk: requires GCLK at half the data rate (2x clocking)
- has_dllon: controller supports DLL clock
Set `has_padcalib` for Octal controllers that provide pad calibration
support. Use `has_2xgclk` for controllers that require the GCLK to run
at twice the data rate. Differentiate SoC integration variants with the
`has_dllon` flag and set it as needed.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://patch.msgid.link/20250908-microchip-qspi-v2-3-8f3d69fdd5c9@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sama7d65 has 2 instances of the QSPI controller:
• One Octal Serial Peripheral Interface (QSPI0) supporting DDR. Octal,
Twin-Quad, HyperFlashTM and OctaFlashTM protocols supported.
• One Quad Serial Peripheral Interface (QSPI1) supporting DDR/SDR.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908-microchip-qspi-v2-2-8f3d69fdd5c9@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the sam9x7 quad spi that supports interface to serial memories
operating in
- Single-bit SPI, Dual SPI, Quad SPI and Octal SPI
- Single Data Rate or Double Data Rate modes
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908-microchip-qspi-v2-1-8f3d69fdd5c9@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a potential integer overflow vulnerability in trace_filter_parse()
where the allocation size calculation could overflow.
The issue occurs when:
1. capacity is calculated by adding TRACE_FILTER_ELEMENTS_PER_ENTRY in a
loop for each entry found in the input string.
2. capacity * sizeof(**out) multiplication could overflow if many
entries are present in the input.
3. This results in a smaller allocation than expected, leading to
potential buffer overflow.
Replace kmalloc() with kmalloc_array() which provides built-in overflow
checking and will safely fail the allocation if overflow would occur,
preventing memory corruption.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20250909225111.3740029-1-samasth.norway.ananda@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CHARGE_CONTROL_LIMIT is a wrong property to report charge current limit,
because `CHARGE_*` attributes represents capacity, not current. The
correct attribute to report and set charge current limit is
CONSTANT_CHARGE_CURRENT.
Rename CHARGE_CONTROL_LIMIT to CONSTANT_CHARGE_CURRENT.
Cc: stable@vger.kernel.org
Fixes: 715ecbc10d ("power: supply: max77976: add Maxim MAX77976 charger driver")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Remove usage of dev_get_regmap, as this its more efficient to directly
reference the pointer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove usage of dev_get_regmap, as this its more efficient to directly
reference the pointer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Soundwire update_status, bus_config and interrupt callbacks for wcd937x,
wcd938x, wcd939x soundwire codecs are exactly identlical, move them to
common driver to remove this duplicate code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
for some reason we ended up with a boiler plate for dev_get_regmap in
wcd939x codec and started exporting a symbol for this. Remove this
redundant wrapper and direclty get regmap.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-11-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component_ops for wcd97x, wcd938x, wcd939x soundwire codecs are exactly
identlical, move them to common driver to remove this duplicate code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sdw_ch_info and WCD_SDW_CH macro is duplicated across wcd937x, wcd938x,
wcd939x soundwire codec drivers. Move this to wcd common driver to
remove this code duplication.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-9-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the Qualcomm WCD codecs have most of its code duplicated across all
these 3/4 drivers. This is an attempt to remove those duplicate
parts by adding a common helper library for these codecs.
To start with move all the micbias parsing and voltage settings these
are identical in WCD934x, WCD937x, WCD938x and WCD939x codec driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
use sdw_slave_get_current_bank() helper function, rather than duplicating
this function in every codec driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20250909121954.225833-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
use of_sdw_find_device_by_node helper function, rather than duplicating
this function in every codec driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There has been 2 instances of this helper in codec drivers,
it does not make sense to keep duplicating this part of code.
Lets add a helper sdw_get_current_bank() for codec drivers to use it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There has been more than 3 instances of this helper in multiple codec
drivers, it does not make sense to keep duplicating this part of code.
Lets add a helper of_sdw_find_device_by_node for codec drivers to use it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20250909121954.225833-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up with stub functions that are not inline,
this can result in build error if its included multiple places, as we will
be redefining the same function
Fixes: c99a515ff1 ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we endup with setting soundwire port for
HPHL_COMP and HPHR_COMP as zero, this can potentially result
in a memory corruption due to accessing and setting -1 th element of
port_map array.
Fixes: 82be8c62a3 ("ASoC: codecs: wcd937x: add basic controls")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250909121954.225833-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly setting dapm->idle_bias, but it will be
impossible soon. adds snd_soc_dapm_set_idle_bias() for them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfbavllj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly using dapm->idle_bias, but it should get it
via get_idle_bias() function. Makes it as global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pomx062.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm is using "idle_bias_off", and its default settings
came from snd_soc_component "idle_bias_on". It is complicated/confusable.
Let's handling it as "idle_bias".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874itix06a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can directly use suspend_bias_off via snd_soc_component, no need
to keep it on dapm. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xdyx06e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current dapm of card/component are using "instance", but it will be
"pointer" if snd_soc_dapm_context was removed from header.
snd_soc_card_to_dapm() is needed to switch to the new style while
maintaining compatibility
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877byex06i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current dapm of card/component are using "instance", but it will be
"pointer" if snd_soc_dapm_context was removed from header.
snd_soc_component_to_dapm() is needed to switch to the new style while
maintaining compatibility
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qiux06m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Now, snd_soc_dapm_to_component() (A) will convert dapm to component by
container_of() (a).
(A) static inline struct snd_soc_component *snd_soc_dapm_to_component(
struct snd_soc_dapm_context *dapm)
{
(a) return container_of(dapm, struct snd_soc_component, dapm);
}
dapm of component works, but dapm of card will be "unknown" pointer
(= not NULL), because (a) is using "container_of()".
OTOH, ASoC will call snd_soc_dapm_init() (X) to initialize dapm, and
it will be called from snd_soc_bind_card() (p) (for card) or
soc_probe_component() (q) (for component) with component pointer.
(p) static int snd_soc_bind_card(...)
{
...
(X) snd_soc_dapm_init(..., NULL);
... ^^^^
}
(q) static int soc_probe_component(...)
{
...
(X) snd_soc_dapm_init(..., component);
... ^^^^^^^^^
}
And snd_soc_dapm_init() (X) will fill dapm->component (x)
(X) void snd_soc_dapm_init(..., component, ...)
{
...
(x) dapm->component = component;
...
}
We can simply use dapm->component in snd_soc_dapm_to_component() (A).
In this case, dapm of card (p) will be just NULL.
Use dapm->component instead of container_of().
The picky note can be removed by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a53ax06q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get card from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjnqx06v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get dev from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cy86x06z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enabling runtime PM allows the kernel to gate clocks and power to idle
devices. On SoCFPGA, a warm reset does not fully reinitialize these
domains.This leaves devices suspended and powered down, preventing U-Boot
or the kernel from reusing them after a warm reset, which breaks the boot
process.
Fixes: 4892b374c9 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support")
CC: stable@vger.kernel.org # 6.12+
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Niravkumar L Rabara <nirav.rabara@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/910aad68ba5d948919a7b90fa85a2fadb687229b.1757491372.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In ipc4_ssp_dai_config_pcm_params_match() when comparing params_channels()
against hw_config->tdm_slots the comparison should be a <= not a ==.
The number of TDM slots must be enough for the number of required channels.
But it can be greater. There are various reason why a I2S/TDM link has more
TDM slots than a particular audio stream needs.
The original comparison would fail on systems that had more TDM slots.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a07944a77 ("ASoC: SOF: ipc4-pcm: Look for best matching hw_config for SSP")
Link: https://patch.msgid.link/20250819160525.423416-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Like done for post context restore, allow the user to add commands to
the middle of context restore, at the beginning of engine restore
commands.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-7-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Like done for post-context-restore commands, allow to add commands from
configfs in the middle of context restore. Since currently the indirect
ctx hardcodes the offset to CTX_INDIRECT_CTX_OFFSET_DEFAULT, this is
executed in the very beginning of engine context restore.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-6-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently it's only allowed for render and compute. Going forward we
want to enable it for more engine classes. Let the XE_LRC_FLAG_INDIRECT_CTX
flag (and thus gt_engine_needs_indirect_ctx()) be the deciding factor
for its availability.
While at it, add the missing const to rcs_funcs array. Since
CTX_INDIRECT_CTX_OFFSET_DEFAULT already matches the HW default and
gt_engine_needs_indirect_ctx() only ever enables it for rcs/ccs, there
is no change in behavior, it's only preparation for future use case.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-5-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Allow the user to specify commands to execute during a context restore.
Currently it's possible to parse 2 types of actions:
- cmd: the instructions are added as is to the bb
- reg: just use the address and value, without worrying about
encoding the right LRI instruction. This is possibly the most
useful use case, so added a dedicated action for that.
This also prepares for future BBs: mid context restore and rc6 context
restore that can re-use the same parsing functions.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-4-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
During validation it's useful to allows additional commands to be
executed on context switch. Fetch the commands from configfs (to be
added) and add them to the WA BB.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-3-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For a future configfs attribute, it's desirable to select by engine mask
only as the instance doesn't make sense.
Rename the function lookup_engine_mask() to lookup_engine_info() and
make it return the entry. This allows parse_engine() to still return an
item if the caller wants to allow parsing a class-only string like
"rcs", "bcs", "ccs", etc.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-2-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Move the part that copies the engine to a local buffer so it can be
shared in future for other configfs attributes parsing an engine.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-1-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.
When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.
To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.
Fixes: 7875afafba ("drm/amd/display: Fix brightness level not retained over reboot")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned out that protecting the status of each bo_va with a
spinlock was just hiding problems instead of solving them.
Revert the whole approach, add a separate stats_lock and lockdep
assertions that the correct reservation lock is held all over the place.
This not only allows for better checks if a state transition is properly
protected by a lock, but also switching back to using list macros to
iterate over the state of lists protected by the dma_resv lock of the
root PD.
v2: re-add missing check
v3: split into two patches
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When rodata=full is specified, kernel linear mapping has to be mapped at
PTE level since large page table can't be split due to break-before-make
rule on ARM64.
This resulted in a couple of problems:
- performance degradation
- more TLB pressure
- memory waste for kernel page table
With FEAT_BBM level 2 support, splitting large block page table to
smaller ones doesn't need to make the page table entry invalid anymore.
This allows kernel split large block mapping on the fly.
Add kernel page table split support and use large block mapping by
default when FEAT_BBM level 2 is supported for rodata=full. When
changing permissions for kernel linear mapping, the page table will be
split to smaller size.
The machine without FEAT_BBM level 2 will fallback to have kernel linear
mapping PTE-mapped when rodata=full.
With this we saw significant performance boost with some benchmarks and
much less memory consumption on my AmpereOne machine (192 cores, 1P)
with 256GB memory.
* Memory use after boot
Before:
MemTotal: 258988984 kB
MemFree: 254821700 kB
After:
MemTotal: 259505132 kB
MemFree: 255410264 kB
Around 500MB more memory are free to use. The larger the machine, the
more memory saved.
* Memcached
We saw performance degradation when running Memcached benchmark with
rodata=full vs rodata=on. Our profiling pointed to kernel TLB pressure.
With this patchset we saw ops/sec is increased by around 3.5%, P99
latency is reduced by around 9.6%.
The gain mainly came from reduced kernel TLB misses. The kernel TLB
MPKI is reduced by 28.5%.
The benchmark data is now on par with rodata=on too.
* Disk encryption (dm-crypt) benchmark
Ran fio benchmark with the below command on a 128G ramdisk (ext4) with
disk encryption (by dm-crypt).
fio --directory=/data --random_generator=lfsr --norandommap \
--randrepeat 1 --status-interval=999 --rw=write --bs=4k --loops=1 \
--ioengine=sync --iodepth=1 --numjobs=1 --fsync_on_close=1 \
--group_reporting --thread --name=iops-test-job --eta-newline=1 \
--size 100G
The IOPS is increased by 90% - 150% (the variance is high, but the worst
number of good case is around 90% more than the best number of bad
case). The bandwidth is increased and the avg clat is reduced
proportionally.
* Sequential file read
Read 100G file sequentially on XFS (xfs_io read with page cache
populated). The bandwidth is increased by 150%.
Co-developed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
This patch paves the path to enable huge mappings in vmalloc space and
linear map space by default on arm64. For this we must ensure that we
can handle any permission games on the kernel (init_mm) pagetable.
Previously, __change_memory_common() used apply_to_page_range() which
does not support changing permissions for block mappings. We move away
from this by using the pagewalk API, similar to what riscv does right
now. It is the responsibility of the caller to ensure that the range
over which permissions are being changed falls on leaf mapping
boundaries. For systems with BBML2, this will be handled in future
patches by dyanmically splitting the mappings when required.
Unlike apply_to_page_range(), the pagewalk API currently enforces the
init_mm.mmap_lock to be held. To avoid the unnecessary bottleneck of the
mmap_lock for our usecase, this patch extends this generic API to be
used locklessly, so as to retain the existing behaviour for changing
permissions. Apart from this reason, it is noted at [1] that KFENCE can
manipulate kernel pgtable entries during softirqs. It does this by
calling set_memory_valid() -> __change_memory_common(). This being a
non-sleepable context, we cannot take the init_mm mmap lock.
Add comments to highlight the conditions under which we can use the
lockless variant - no underlying VMA, and the user having exclusive
control over the range, thus guaranteeing no concurrent access.
We require that the start and end of a given range do not partially
overlap block mappings, or cont mappings. Return -EINVAL in case a
partial block mapping is detected in any of the PGD/P4D/PUD/PMD levels;
add a corresponding comment in update_range_prot() to warn that
eliminating such a condition is the responsibility of the caller.
Note that, the pte level callback may change permissions for a whole
contpte block, and that will be done one pte at a time, as opposed to an
atomic operation for the block mappings. This is fine as any access will
decode either the old or the new permission until the TLBI.
apply_to_page_range() currently performs all pte level callbacks while
in lazy mmu mode. Since arm64 can optimize performance by batching
barriers when modifying kernel pgtables in lazy mmu mode, we would like
to continue to benefit from this optimisation. Unfortunately
walk_kernel_page_table_range() does not use lazy mmu mode. However,
since the pagewalk framework is not allocating any memory, we can safely
bracket the whole operation inside lazy mmu mode ourselves. Therefore,
wrap the call to walk_kernel_page_table_range() with the lazy MMU
helpers.
Link: https://lore.kernel.org/linux-arm-kernel/89d0ad18-4772-4d8f-ae8a-7c48d26a927e@arm.com/ [1]
Signed-off-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Yang Shi <yshi@os.amperecomputing.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
