The callers of mst_stream_find_vcpi_slots_for_bpp() don't need the
returned slots for anything. On the contrary, they need to jump through
hoops to just distinguish between success and failure. Just return 0
instead of slots from mst_stream_find_vcpi_slots_for_bpp() for success,
and simplify the callers.
There's a pointless ret local variable that we can drop in the process.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7b3671a548c893b1bb62151d41f90bb8ce842ccc.1735912293.git.jani.nikula@intel.com
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.
On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.
Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Lenovo ThinkPad T14s, the fingerprint reader placed in the power
button is connected via the usb_2 controller. The controller has only
a USB 2.0 PHY which is then connected via a NXP PTN3222 eUSB2 repeater,
which in turn is connected to the Goodix fingerprint reader.
So enable all the usb_2 controller and PHY nodes, set dual-role mode to
host and describe the eUSB2 repeater in order to get the fingerprint
reader discovered.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-t14-enable-fingerprint-sensor-v1-1-8fd911d39ad1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable necessary drivers for booting Qualcomm SM8750 based boards like
MTP8750 and QRD8750. The clock controller (GCC), interconnect and
pinctrl drivers are considered necessary for early boot debugging, e.g.
via serial console, thus make them built-in.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250107155452.389154-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Allowing the usb_2 controller GDSC to be turned off during system suspend
renders the controller unable to resume.
So use PWRSTS_RET_ON instead in order to make sure this the GDSC doesn't
go down.
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-clk-gcc-fix-usb2-gdsc-pwrsts-v1-1-e15d1a5e7d80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the function tracing_set_tracer() switched over to using the guard()
infrastructure, it did not need to save the 'ret' variable and would just
return the value when an error arised, instead of setting ret and jumping
to an out label.
When CONFIG_TRACER_SNAPSHOT is enabled, it had code that expected the
"ret" variable to be initialized to zero and had set 'ret' while holding
an arch_spin_lock() (not used by guard), and then upon releasing the lock
it would check 'ret' and exit if set. But because ret was only set when an
error occurred while holding the locks, 'ret' would be used uninitialized
if there was no error. The code in the CONFIG_TRACER_SNAPSHOT block should
be self contain. Make sure 'ret' is also set when no error occurred.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250106111143.2f90ff65@gandalf.local.home
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412271654.nJVBuwmF-lkp@intel.com/
Fixes: d33b10c0c7 ("tracing: Switch trace.c code over to use guard()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add following coresight components for x1e80100 platform.
It includes CTI, dummy sink, dynamic Funnel, Replicator, STM,
TPDM, TPDA and TMC ETF.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Yushan Li <quic_yushli@quicinc.com>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Link: https://lore.kernel.org/r/20241205054904.535465-1-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the SerDes PHY on qcs8300-ride. Add the MDC and MDIO pin functions
for ethernet0 on qcs8300-ride. Enable the ethernet port on qcs8300-ride.
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241206-dts_qcs8300-v5-2-422e4fda292d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the node for the first ethernet interface on qcs8300 platform.
Add the internal SGMII/SerDes PHY node as well.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Link: https://lore.kernel.org/r/20241206-dts_qcs8300-v5-1-422e4fda292d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "capacity-dmips-mhz" and "dynamic-power-coefficient" are used to
build Energy Model which in turn is used by EAS to take placement
decisions. So add it to QCS8300 SoC.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241206-qcs8300_dpc-v1-1-af2e8e6d3da9@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ALC5682I-VD and ALC5682I-VE use the same I2C
codec driver with different calibration settings.
This patch aims to handle their differences.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://patch.msgid.link/20241225094307.3678837-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some scenarios, some multipath software setup places the
REQ_FAILFAST_DEV flag on I/O to prevent retries and immediately
switch to other paths for issuing I/O commands. This will reflect
on the NVMe read and write commands with the limited retry flag.
However, the current NVMe target side does not handle the limited
retry flag, and the target's underlying driver still retries the
I/O. This will result in the I/O not being quickly switched to
other paths, ultimately leading to increased I/O latency.
When the nvme target receive an rw command with limited retry flag,
handle it in block backend by setting the REQ_FAILFAST_DEV flag to
bio.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
As there is only one in-tree user, avoid a transition phase and switch
that user in the same commit. As there are some interdependencies
between the constness of the different symbols in the s390 driver,
covert the whole driver at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241205-sysfs-const-bin_attr-groups_macro-v1-1-ac5e855031e8@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing reset entry for the `SYS` module in the clock driver. The
corresponding core clock entry for `SYS` is already present.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250102181839.352599-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock structure for RZ/G3E is almost identical to RZ/V2H SoC with
more IP blocks compared to RZ/V2H. For eg: VSPI, LVDS, DPI and LCDC1
are present only on the RZ/G3E SoC.
Add minimal clock and reset entries required to boot the Renesas RZ/G3E
SMARC EVK and binds it with the RZ/V2H CPG core driver.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241213123550.289193-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
DT bindings and binding definitions for the Renesas RZ/G3E (R9A09G047)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ1wIdAAKCRCKwlD9ZEnx
cOEoAQCwqQx+/KkB++5y6zBQRmUf6vQaQJ65UgfVUG50xj7ojQEAm7Vx6rYhTnv0
L7a+yWQCdjvpbUNwiFa3sz5KU0jPrwA=
=Jx4b
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g047-dt-binding-defs-tag1' into renesas-clk-for-v6.14
Renesas RZ/G3E DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/G3E (R9A09G047)
SoC, shared by driver and DT source files.
The notes attribute can be implemented in terms of BIN_ATTR_SIMPLE().
This saves memory at runtime and is a preparation for the constification
of struct bin_attribute.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241121-sysfs-const-bin_attr-ksysfs-v1-1-972faced149d@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmdZ92YACgkQ+mJfZA7r
E8pSlQf+O3NYEw4F0Y8FSTY0rlG0WO+0p5fjrVipfkj3DOe+Z8uYyghrYwGqyIX9
GRcd4GLYiGNxToSfLY5B0+fQtF16S0L2dtAJ1sOFhG1HdVmV+1pzQs63ZRAyr4xc
NrPMLKOef1GvtOUaSxqDUmvrK8yiJevmYosjopFgzQjkiFOkK0WAErZVwBZypLKz
UYL1JOeStp9jG1ZEPNAfavIn/Ldquem1vjPZvLGwAfP/Sf/VxJDtabXHeXog+zf/
9pfrYvLLHStAMUJUIenfJr86W22Y4b7mvQFVuz25a/fIacd+9NaRKUqkltHE0/2o
aXPNMI31BiN++yJwoeQIY4HlMZMBgw==
=rw4n
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-12-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
Update MAINTAINERS and link my various emails to
my company email address in .mailmap.
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Add an io-pgtable method to walk the pgtable returning the raw PTEs that
would be traversed for a given iova access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-4-robdclark@gmail.com
[will: Removed 'arm_lpae_io_pgtable_walk_data::level' per Mostafa]
Signed-off-by: Will Deacon <will@kernel.org>
We can re-use this basic pgtable walk logic in a few places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-2-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Fixup the uc_attr_mem_limit test case to also cover the
KVM_HAS_DEVICE_ATTR ioctl.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-7-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-7-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Add a selftests for the interrupt routing configuration when using
ucontrol VMs.
Calling the test may trigger a null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-5-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-5-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Add some superficial selftests for the floating interrupt controller
when using ucontrol VMs. These tests are intended to cover very basic
calls only.
Some of the calls may trigger null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-3-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-3-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
In commit 77b5334115 ("KVM: s390: VSIE: sort out virtual/physical
address in pin_guest_page"), only pin_scb() has been updated. This
means that in unpin_scb() a virtual address was still used directly as
physical address without conversion. The resulting physical address is
obviously wrong and most of the time also invalid.
Since commit d0ef8d9fbe ("KVM: s390: Use kvm_release_page_dirty() to
unpin "struct page" memory"), unpin_guest_page() will directly use
kvm_release_page_dirty(), instead of kvm_release_pfn_dirty(), which has
since been removed.
One of the checks that were performed by kvm_release_pfn_dirty() was to
verify whether the page was valid at all, and silently return
successfully without doing anything if the page was invalid.
When kvm_release_pfn_dirty() was still used, the invalid page was thus
silently ignored. Now the check is gone and the result is an Oops.
This also means that when running with a V!=R kernel, the page was not
released, causing a leak.
The solution is simply to add the missing virt_to_phys().
Fixes: 77b5334115 ("KVM: s390: VSIE: sort out virtual/physical address in pin_guest_page")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20241210083948.23963-1-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20241210083948.23963-1-imbrenda@linux.ibm.com>
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4b ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
