Commit graph

1,398,251 commits

Author SHA1 Message Date
Bjorn Helgaas
dd4e47eab8 PCI: aardvark: Correct Configuration RRS checking
Per PCIe r6.0, sec 2.3.2, when a Root Complex handles a Completion with
Request Retry Status for a Configuration Read Request that includes both
bytes of the Vendor ID field, it must complete the Request to the host by
returning 0001h for the Vendor ID and all 1's for any additional bytes.

Previously we only returned the 0001h Vendor ID value if we got an RRS
completion for reads of exactly 4 bytes.  A read of 2 bytes would not
qualify, although the spec says it should.

Check for reads of 2 or more bytes including the Vendor ID.

I don't think this will fix any observable problems because RRS only
applies to the first config reads after reset, and those are all currently
dword (4-byte) reads.

Link: https://lore.kernel.org/r/20240827234848.4429-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-09-10 19:52:30 -05:00
Bjorn Helgaas
d591f6804e PCI: Wait for device readiness with Configuration RRS
After a device reset, delays are required before the device can
successfully complete config accesses.  PCIe r6.0, sec 6.6, specifies some
delays required before software can perform config accesses.  Devices that
require more time after those delays may respond to config accesses with
Configuration Request Retry Status (RRS) completions.

Callers of pci_dev_wait() are responsible for delays until the device can
respond to config accesses.  pci_dev_wait() waits any additional time until
the device can successfully complete config accesses.

Reading config space of devices that are not present or not ready typically
returns ~0 (PCI_ERROR_RESPONSE).  Previously we polled the Command register
until we got a value other than ~0.  This is sometimes a problem because
Root Complex handling of RRS completions may include several retries and
implementation-specific behavior that is invisible to software (see sec
2.3.2), so the exponential backoff in pci_dev_wait() may not work as
intended.

Linux enables Configuration RRS Software Visibility on all Root Ports that
support it.  If it is enabled, read the Vendor ID instead of the Command
register.  RRS completions cause immediate return of the 0x0001 reserved
Vendor ID value, so the pci_dev_wait() backoff works correctly.

When a read of Vendor ID eventually completes successfully by returning a
non-0x0001 value (the Vendor ID or 0xffff for VFs), the device should be
initialized and ready to respond to config requests.

For conventional PCI devices or devices below Root Ports that don't support
Configuration RRS Software Visibility, poll the Command register as before.

This was developed independently, but is very similar to Stanislav
Spassov's previous work at
https://lore.kernel.org/linux-pci/20200223122057.6504-1-stanspas@amazon.com

Link: https://lore.kernel.org/r/20240827234848.4429-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Duc Dang <ducdang@google.com>
2024-09-10 19:52:23 -05:00
Lucas De Marchi
2c3631fbd8 drm/i915/pmu: Use event_to_pmu()
i915 pointer is not needed in this function and all the others simply
calculate the i915_pmu container based on the event->pmu. Follow the
same logic as in other functions.

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909204340.3646458-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-09-10 17:45:59 -07:00
Lucas De Marchi
10a7210d59 drm/i915/pmu: Drop is_igp()
There's no reason to hardcode checking for integrated graphics on a
specific pci slot. That information is already available per platform an
can be checked with IS_DGFX().

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909204340.3646458-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-09-10 17:45:53 -07:00
Pieter Van Trappen
3f464b193d net: dsa: microchip: update tag_ksz masks for KSZ9477 family
Remove magic number 7 by introducing a GENMASK macro instead.
Remove magic number 0x80 by using the BIT macro instead.

Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240909134301.75448-1-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:27:56 -07:00
Wei Fang
2f9caba9b2 dt-bindings: net: tja11xx: fix the broken binding
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.

Fixes: 52b2fe4535 ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org  # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:12:58 -07:00
Jakub Kicinski
97b1ebb1e2 Merge branch 'net-timestamp-introduce-a-flag-to-filter-out-rx-software-and-hardware-report'
Jason Xing says:

====================
net-timestamp: introduce a flag to filter out rx software and hardware report

When one socket is set SOF_TIMESTAMPING_RX_SOFTWARE which means the
whole system turns on the netstamp_needed_key button, other sockets
that only have SOF_TIMESTAMPING_SOFTWARE will be affected and then
print the rx timestamp information even without setting
SOF_TIMESTAMPING_RX_SOFTWARE generation flag.

How to solve it without breaking users?
We introduce a new flag named SOF_TIMESTAMPING_OPT_RX_FILTER. Using
it together with SOF_TIMESTAMPING_SOFTWARE can stop reporting the
rx software timestamp.

Similarly, we also filter out the hardware case where one process
enables the rx hardware generation flag, then another process only
passing SOF_TIMESTAMPING_RAW_HARDWARE gets the timestamp. So we can set
both SOF_TIMESTAMPING_RAW_HARDWARE and SOF_TIMESTAMPING_OPT_RX_FILTER
to stop reporting rx hardware timestamp after this patch applied.

v6: https://lore.kernel.org/20240906095640.77533-1-kerneljasonxing@gmail.com
v5: https://lore.kernel.org/20240905071738.3725-1-kerneljasonxing@gmail.com
v4: https://lore.kernel.org/20240830153751.86895-1-kerneljasonxing@gmail.com
v3: https://lore.kernel.org/20240828160145.68805-1-kerneljasonxing@gmail.com
v2: https://lore.kernel.org/20240825152440.93054-1-kerneljasonxing@gmail.com
====================

Link: https://patch.msgid.link/20240909015612.3856-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:57:12 -07:00
Jason Xing
fffe8efd68 net-timestamp: add selftests for SOF_TIMESTAMPING_OPT_RX_FILTER
Test a few possible cases where we use SOF_TIMESTAMPING_OPT_RX_FILTER
with software or hardware report/generation flag.

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:55:23 -07:00
Jason Xing
be8e9eb375 net-timestamp: introduce SOF_TIMESTAMPING_OPT_RX_FILTER flag
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive
path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter
out rx software timestamp report, especially after a process turns on
netstamp_needed_key which can time stamp every incoming skb.

Previously, we found out if an application starts first which turns on
netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE
could also get rx timestamp. Now we handle this case by introducing this
new flag without breaking users.

Quoting Willem to explain why we need the flag:
"why a process would want to request software timestamp reporting, but
not receive software timestamp generation. The only use I see is when
the application does request
SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE."

Similarly, this new flag could also be used for hardware case where we
can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive
hardware receive timestamp.

Another thing about errqueue in this patch I have a few words to say:
In this case, we need to handle the egress path carefully, or else
reporting the tx timestamp will fail. Egress path and ingress path will
finally call sock_recv_timestamp(). We have to distinguish them.
Errqueue is a good indicator to reflect the flow direction.

Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:55:23 -07:00
Jason Xing
e503f82e30 net-timestamp: correct the use of SOF_TIMESTAMPING_RAW_HARDWARE
SOF_TIMESTAMPING_RAW_HARDWARE is a report flag which passes the
timestamps generated by either SOF_TIMESTAMPING_TX_HARDWARE or
SOF_TIMESTAMPING_RX_HARDWARE to the userspace all the time.

So let us revise the doc here.

Link: https://lore.kernel.org/all/66d8c21d3042a_163d93294cb@willemb.c.googlers.com.notmuch/
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20240908124141.39628-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:55:08 -07:00
Jakub Kicinski
cce2991e7e Merge branch 'net-stmmac-fpe-via-ethtool-tc'
Furong Xu says:

====================
net: stmmac: FPE via ethtool + tc

Move the Frame Preemption(FPE) over to the new standard API which uses
ethtool-mm/tc-mqprio/tc-taprio.
====================

Link: https://patch.msgid.link/cover.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:15 -07:00
Furong Xu
22a805d880 net: stmmac: silence FPE kernel logs
ethtool --show-mm can get real-time state of FPE.
fpe_irq_status logs should keep quiet.

tc-taprio can always query driver state, delete unbalanced logs.

Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/39943d7967f291674a97ef0572878aca273087e9.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:12 -07:00
Furong Xu
15d8a407a5 net: stmmac: support fp parameter of tc-taprio
tc-taprio can select whether traffic classes are express or preemptible.

0) tc qdisc add dev eth1 parent root handle 100 taprio \
        num_tc 4 \
        map 0 1 2 3 2 2 2 2 2 2 2 2 2 2 2 3 \
        queues 1@0 1@1 1@2 1@3 \
        base-time 1000000000 \
        sched-entry S 03 10000000 \
        sched-entry S 0e 10000000 \
        flags 0x2 fp P E E E

1) After some traffic tests, MAC merge layer statistics are all good.

Local device:
[ {
        "ifname": "eth1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 0,
            "MACMergeFragCountRx": 0,
            "MACMergeFragCountTx": 17837,
            "MACMergeHoldCount": 18639
        }
    } ]

Remote device:
[ {
        "ifname": "end1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 17189,
            "MACMergeFragCountRx": 17837,
            "MACMergeFragCountTx": 0,
            "MACMergeHoldCount": 0
        }
    } ]

Tested on DWMAC CORE 5.10a

Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/0d21ae356fb3cab77337527e87d46748a4852055.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:12 -07:00
Furong Xu
195e4f409a net: stmmac: support fp parameter of tc-mqprio
tc-mqprio can select whether traffic classes are express or preemptible.

After some traffic tests, MAC merge layer statistics are all good.

Local device:
ethtool --include-statistics --json --show-mm eth1
[ {
        "ifname": "eth1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 0,
            "MACMergeFragCountRx": 0,
            "MACMergeFragCountTx": 35105,
            "MACMergeHoldCount": 0
        }
    } ]

Remote device:
ethtool --include-statistics --json --show-mm end1
[ {
        "ifname": "end1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 35105,
            "MACMergeFragCountRx": 35105,
            "MACMergeFragCountTx": 0,
            "MACMergeHoldCount": 0
        }
    } ]

Tested on DWMAC CORE 5.10a

Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/592965ea93ed8240f0a1b8f6f8ebb8914f69419b.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:12 -07:00
Furong Xu
0f156aceee net: stmmac: configure FPE via ethtool-mm
Implement ethtool --show-mm and --set-mm callbacks.

NIC up/down, link up/down, suspend/resume, kselftest-ethtool_mm,
all tested okay.

Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/06ed409314fe0ee37b78b800922f2c0cce762532.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:12 -07:00
Furong Xu
8d43e99a5a net: stmmac: refactor FPE verification process
Drop driver defined stmmac_fpe_state, and switch to common
ethtool_mm_verify_status for local TX verification status.

Local side and remote side verification processes are completely
independent. There is no reason at all to keep a local state and
a remote state.

Add a spinlock to avoid races among ISR, timer, link update
and register configuration.

This patch is based on Vladimir Oltean's proposal.

Vladimir Oltean says:

  ====================
  In the INITIAL state, the timer sends MPACKET_VERIFY. Eventually the
  stmmac_fpe_event_status() IRQ fires and advances the state to VERIFYING,
  then rearms the timer after verify_time ms. If a subsequent IRQ comes in
  and modifies the state to SUCCEEDED after getting MPACKET_RESPONSE, the
  timer sees this. It must enable the EFPE bit now. Otherwise, it
  decrements the verify_limit counter and tries again. Eventually it
  moves the status to FAILED, from which the IRQ cannot move it anywhere
  else, except for another stmmac_fpe_apply() call.
  ====================

Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/151f86c8428eba967039718c6bf90a7d841e703b.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:11 -07:00
Furong Xu
59dd7fc932 net: stmmac: drop stmmac_fpe_handshake
ethtool --set-mm can trigger FPE verification process by calling
stmmac_fpe_send_mpacket, stmmac_fpe_handshake should be gone.

Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/42018b1a15eb3ced567fd6a73798c7cd4e08799a.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:11 -07:00
Furong Xu
070a5e6295 net: stmmac: move stmmac_fpe_cfg to stmmac_priv data
By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg
becomes platform-data eventually, instead of a run-time config.

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:42:11 -07:00
Sean Anderson
e8a63d473b selftests: net: csum: Fix checksums for packets with non-zero padding
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like

rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum

Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.

Fixes: 91a7de8560 ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:33:31 -07:00
Tomas Paukrt
3f62ea572b net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().

Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future.

Fixes: 9ef9ecfa9e ("net: phy: dp8382x: keep WOL settings across suspends")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 16:20:15 -07:00
David Lechner
82abef590e Input: ims-pcu - fix calling interruptible mutex
Fix calling scoped_cond_guard() with mutex instead of mutex_intr.

scoped_cond_guard(mutex, ...) will call mutex_lock() instead of
mutex_lock_interruptible().

Fixes: 703f12672e ("Input: ims-pcu - switch to using cleanup functions")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240910-input-misc-ims-pcu-fix-mutex-intr-v1-1-bdd983685c43@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-10 16:13:44 -07:00
Dave Airlie
32bd3eb5fb Merge tag 'drm-intel-gt-next-2024-09-06' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:

- Expose fan speed via hwmon (Raag)
- Correction to Wa_14019159160 on ARL (John H)
- Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar)
- Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele)

- Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi)
- Use kmemdup_array instead of kmemdup for multiple allocation (Yu)
- Remove extra unlikely() (Hongbo)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztrfr_Wuurfa-3Rv@jlahtine-mobl.ger.corp.intel.com
2024-09-11 09:11:54 +10:00
Niklas Cassel
e5dd410acb ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.

scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.

Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.

libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.

Thus, libata doesn't really care about DID_TIME_OUT at all, and currently
clears the host byte at the end of EH, in ata_scsi_qc_complete(), before
scsi_eh_finish_cmd() is called.

However, this clearing in ata_scsi_qc_complete() is currently only done
for commands that are not ATA passthrough commands.

Since the host byte is visible in the completion that we return to user
space for ATA passthrough commands, for ATA passthrough commands that got
completed via EH (commands with sense data), the user will incorrectly see:
ATA pass-through(16): transport error: Host_status=0x03 [DID_TIME_OUT]

Fix this by moving the clearing of the host byte (which is currently only
done for commands that are not ATA passthrough commands) from
ata_scsi_qc_complete() to the start of EH (regardless if the command is
ATA passthrough or not).

While at it, use the proper helper function to clear the host byte, rather
than open coding the clearing.

This will make sure that we:
-Correctly clear DID_TIME_OUT for both ATA passthrough commands and
 commands that are not ATA passthrough commands.
-Do not needlessly clear the host byte for commands that did not go via EH.
 ata_scsi_qc_complete() is called both for commands that are completed
 normally (without going via EH), and for commands that went via EH,
 however, only commands that went via EH will have DID_TIME_OUT set.

Fixes: 24aeebbf8e ("scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITION")
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Closes: https://lore.kernel.org/linux-ide/ZttIN8He8TOZ7Lct@google.com/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-11 08:03:43 +09:00
Andrew Kreimer
69f3014248
ASoC: tlv320aic31xx: Fix typos
Fix typos in comments.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://patch.msgid.link/20240910211302.8909-1-algonell@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-10 23:46:53 +01:00
Yu Kuai
a7609d2aec block, bfq: factor out a helper to split bfqq in bfq_init_rq()
Make code cleaner, there are no functional changes.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-8-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
3c61429c29 block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
Now that 'bfqq_already_existing' is only used in one branch, it can be
removed. There are no functional changes.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
e61e002a67 block, bfq: remove local variable 'split' in bfq_init_rq()
The local variable is used to call bfq_bfqq_resume_state() later,
since 'bfqd->lock' is held, and bfqq status will not change between
setting 'split' and calling bfq_bfqq_resume_state(), move forward
bfq_bfqq_resume_state() so that 'split' can be removed. There are no
functional chagnes.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
553a606c25 block, bfq: remove bfq_log_bfqg()
It's not used, hence can be removed.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
bc3b1e9e7c block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
Because bfq_put_cooperator() is always followed by
bfq_release_process_ref().

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
73aeab3735 block, bfq: fix procress reference leakage for bfqq in merge chain
Original state:

        Process 1       Process 2       Process 3       Process 4
         (BIC1)          (BIC2)          (BIC3)          (BIC4)
          Λ                |               |               |
           \--------------\ \-------------\ \-------------\|
                           V               V               V
          bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
    ref    0               1               2               4

After commit 0e456dba86 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:

Without the patch:

        Process 1       Process 2       Process 3       Process 4
         (BIC1)          (BIC2)          (BIC3)          (BIC4)
          Λ                |               |               |
           \------------------------------\ \-------------\|
                                           V               V
          bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
    ref    0               0               2               4

bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;

With the patch:

          -------------------------------------------
          |                                         |
        Process 1       Process 2       Process 3   |   Process 4
         (BIC1)          (BIC2)          (BIC3)     |    (BIC4)
                           |               |        |      |
                            \-------------\ \-------------\|
                                           V               V
          bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
    ref    0               0               2               4

IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.

Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.

Fixes: 0e456dba86 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
1ba0403ac6 block, bfq: fix uaf for accessing waker_bfqq after splitting
After commit 42c306ed72 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.

Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.

Fixes: 42c306ed72 ("block, bfq: don't break merge chain in bfq_split_bfqq()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:32:09 -06:00
Yu Kuai
29390bb566 blk-throttle: support prioritized processing of metadata
Currently, blk-throttle handle all IO fifo, hence if data IO is
throttled and then meta IO is dispatched, the meta IO will have to wait
for the data IO, causing priority inversion problems.

This patch support to handle metadata first and then pay debt while
throttling data.

Test script: use cgroup v1 to throttle root cgroup, then create new
dir and file while write back is throttled

test() {
  mkdir /mnt/test/xxx
  touch /mnt/test/xxx/1
  sync /mnt/test/xxx
  sync /mnt/test/xxx
}

mkfs.ext4 -F /dev/nvme0n1 -E lazy_itable_init=0,lazy_journal_init=0
mount /dev/nvme0n1 /mnt/test

echo "259:0 $((1024*1024))" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device
dd if=/dev/zero of=/mnt/test/foo1 bs=16M count=1 conv=fdatasync status=none &
sleep 4

time test
echo "259:0 0" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device

sleep 1
umount /dev/nvme0n1

Test result: time cost for creating new dir and file
before this patch:  14s
after this patch:   0.1s

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240903135149.271857-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:31:41 -06:00
Yu Kuai
3bf73e6283 blk-throttle: remove last_low_overflow_time
last_low_overflow_time is not used anymore after commit bf20ab538c
("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW").

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240903135149.271857-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10 16:31:41 -06:00
Jason Gerecke
84aecf2d25 HID: wacom: Do not warn about dropped packets for first packet
The driver currently assumes that the first sequence number it will see
is going to be 0. This is not a realiable assumption and can break if,
for example, the tablet has already been running for some time prior to
the kernel driver connecting to the device. This commit initializes the
expected sequence number to -1 and will only print the "Dropped" warning
the it has been updated to a non-negative value.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-09-10 23:47:03 +02:00
Jason Gerecke
359673ea3a HID: wacom: Support sequence numbers smaller than 16-bit
The current dropped packet reporting assumes that all sequence numbers
are 16 bits in length. This results in misleading "Dropped" messages if
the hardware uses fewer bits. For example, if a tablet uses only 8 bits
to store its sequence number, once it rolls over from 255 -> 0, the
driver will still be expecting a packet "256". This patch adjusts the
logic to reset the next expected packet to logical_minimum whenever
it overflows beyond logical_maximum.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-09-10 23:47:03 +02:00
Shivam Chaudhary
4f77c34623 Remove duplicate "and" in 'Linux NVMe docs.
Remove duplicate occurrence of 'and' in
'Linux NVMe Feature and Quirk Policy' title heading.

tested: Not breaking anything.

Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240910052737.30579-1-cvam0000@gmail.com>
2024-09-10 15:44:20 -06:00
Dennis Lam
2409952f64 docs:filesystems: fix spelling and grammar mistakes
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240906195400.39949-1-dennis.lamerice@gmail.com>
2024-09-10 15:36:50 -06:00
Dennis Lam
0cac9253a0 docs:filesystem: fix mispelled words on autofs page
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240908183741.15352-2-dennis.lamerice@gmail.com>
2024-09-10 15:35:36 -06:00
Dennis Lam
bf78b46683 docs:mm: fixed spelling and grammar mistakes on vmalloc kernel stack page
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240906204914.42698-2-dennis.lamerice@gmail.com>
2024-09-10 15:31:45 -06:00
Abdul Rahim
e6ba83cb81 Documentation: PCI: fix typo in pci.rst
Fix typo: "follow" -> "following" in pci.rst

Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240906205656.8261-1-abdul.rahim@myyahoo.com>
2024-09-10 15:30:42 -06:00
Andrii Nakryiko
58ff04e2e2 MAINTAINERS: record lib/buildid.c as owned by BPF subsystem
Build ID fetching code originated from ([0]), and is still both owned
and heavily relied upon by BPF subsystem.

Fix the original omission in [0] to record this fact in MAINTAINERS.

  [0] bd7525dacd ("bpf: Move stack_map_get_build_id into lib")

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240909190426.2229940-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-10 14:29:25 -07:00
Alex Deucher
17ea438364 drm/amdgpu/atomfirmware: Silence UBSAN warning
Per the comments, these are variable sized arrays.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81f7804ba8)
Cc: stable@vger.kernel.org
2024-09-10 17:27:17 -04:00
David (Ming Qiang) Wu
8409fb50ce drm/amd/amdgpu: apply command submission parser for JPEG v1
Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3d5adbdf1d)
Cc: stable@vger.kernel.org
2024-09-10 17:26:55 -04:00
David (Ming Qiang) Wu
3a23aa0b9c drm/amd/amdgpu: apply command submission parser for JPEG v2+
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).

Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88dcad2d07)
Cc: stable@vger.kernel.org
2024-09-10 17:26:49 -04:00
Tejas Vipin
f327bfdbf6 drm/panel: samsung-s6e3fa7: transition to mipi_dsi wrapped functions
Changes the samsung-s6e3fa7 panel to use multi style functions for
improved error handling.

Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902071019.351158-1-tejasvipin76@gmail.com
2024-09-10 14:23:33 -07:00
Kenneth Feng
7a0982523c drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fedf6db3ea)
2024-09-10 17:23:18 -04:00
Kenneth Feng
612e3bacf8 drm/amd/pm: update the features set on smu v14.0.2/3
update the features set on smu v14.0.2/3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25d48f2eb0)
2024-09-10 17:23:07 -04:00
Dongliang Mu
5d5f9229ab docs/zh_CN: add the translation of kbuild/gcc-plugins.rst
Finish the translation of kbuild/gcc-plugins.rst and move gcc-plugins
from TODO to the main body.

Update to commit 3832d1fd84 ("docs/core-api: expand Fedora instructions
for GCC plugins")

Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240907070244.206808-1-dzm91@hust.edu.cn>
2024-09-10 15:16:56 -06:00
Andrew Kreimer
c5d436f05a docs/process: fix typos
Fix typos in documentation.

Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240907122534.15998-1-algonell@gmail.com>
2024-09-10 15:16:28 -06:00
Dennis Lam
406c4c5ee4 docs:mm: fix spelling mistakes in heterogeneous memory management page
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240908161928.3700-1-dennis.lamerice@gmail.com>
2024-09-10 15:14:57 -06:00