It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A patch from a few days ago fixed the division issue on 32-bit machines,
but it introduced a coding style problem.
WARNING: Missing a blank line after declarations
+ u32 rem;
+ div_u64_rem(off >> PCACHE_CACHE_SUBTREE_SIZE_SHIFT,
cache->n_ksets, &rem);
total: 0 errors, 1 warnings, 634 lines checked
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The smatch checker reports a “scheduler in atomic context” problem in
the following call chain:
miss_read_end_req()
-> cache_seg_put()
-> cache_seg_invalidate()
-> cache_seg_gen_increase()
-> mutex_lock(&cache_seg->ctrl_lock);
In practice, this `mutex_lock` will not actually schedule, because it is
only called when `cache_seg_put()` drops the last reference, which is
single-threaded. That is also why the issue never shows up during real
testing.
However, the code is still buggy. The original purpose of `ctrl_lock`
was to prevent read/write conflicts on the cache segment control
information. Looking at the current usage, all control information
accesses are single-threaded: reads only occur during the init phase,
where no conflicts are possible, and writes happen once in the init
phase (also single-threaded) and once when `cache_seg_put()` drops the
last reference (again single-threaded).
Therefore, this patch removes `ctrl_lock` entirely and adds comments in
the appropriate places to document this logic.
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Now that Secure AVIC support is complete, make it part of to the SNP present
features.
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828113225.209174-1-Neeraj.Upadhyay@amd.com
The SECURE_AVIC_CONTROL MSR holds the GPA of the guest APIC backing page and
bitfields to control enablement of Secure AVIC and whether the guest allows
NMIs to be injected by the hypervisor.
This MSR is populated by the guest and can be read by the guest to get the GPA
of the APIC backing page. The MSR can only be accessed in Secure AVIC mode.
Any attempt to access it when not in Secure AVIC mode results in #GP. So, the
hypervisor should not intercept it. A #VC exception will be generated
otherwise. If this occurs and Secure AVIC is enabled, terminate the guest
execution.
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828113119.209135-1-Neeraj.Upadhyay@amd.com
With all the pieces in place now, enable Secure AVIC in the Secure AVIC
Control MSR. Any access to x2APIC MSRs are emulated by the hypervisor
before Secure AVIC is enabled in the control MSR. Post Secure AVIC
enablement, all x2APIC MSR accesses (whether accelerated by AVIC
hardware or trapped as a #VC exception) operate on the vCPU's APIC
backing page.
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828112126.209028-1-Neeraj.Upadhyay@amd.com
Commit 05f254a636 ("ALSA: usb-audio:
Improve filtering of sample rates on Focusrite devices") changed the
check for max_rate in a way which was overly restrictive, forcing
devices to use very high samplerates if they support them, despite
support existing for lower rates as well.
This maintains the intended outcome (ensuring samplerates selected are
supported) while allowing devices with higher maximum samplerates to be
opened at all supported samplerates.
This patch was tested with a Clarett+ 8Pre USB
Fixes: 05f254a636 ("ALSA: usb-audio: Improve filtering of sample rates on Focusrite devices")
Signed-off-by: Tina Wuest <tina@wuest.me>
Link: https://patch.msgid.link/20250901092024.140993-1-tina@wuest.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several RISC-V boards feature Imagination GPUs that are compatible with
the PowerVR driver. An example is the IMG BXM-4-64 GPU on the Lichee Pi
4A board. This commit adjusts the driver's Kconfig dependencies to allow
the PowerVR driver to be compiled on the RISC-V architecture.
By enabling compilation on RISC-V, we expand support for these GPUs,
providing graphics acceleration capabilities and enhancing hardware
compatibility on RISC-V platforms.
The RISC-V support is restricted to 64-bit systems (RISCV && 64BIT) as
the driver currently has an implicit dependency on a 64-bit platform.
Add a dependency on MMU to fix a build warning on RISC-V configurations
without an MMU.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250822-apr_14_for_sending-v13-4-af656f7cc6c3@samsung.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Rework the PowerVR Rogue GPU binding to use an explicit, per variant
style for defining power domain properties and add support for the
T-HEAD TH1520 SoC's GPU.
To improve clarity and precision, the binding is refactored so that
power domain items are listed explicitly for each variant [1]. The
previous method relied on an implicit, positional mapping between the
`power-domains` and `power-domain-names` properties. This change
replaces the generic rules with self contained if/then blocks for each
GPU variant, making the relationship between power domains and their
names explicit and unambiguous.
The generic if block for img,img-rogue, which previously required
power-domains and power-domain-names for all variants, is removed.
Instead, each specific GPU variant now defines its own power domain
requirements within a self-contained if/then block, making the schema
more explicit.
This new structure is then used to add support for the
`thead,th1520-gpu`. While its BXM-4-64 IP has two conceptual power
domains, the TH1520 SoC integrates them behind a single power gate. The
new binding models this with a specific rule that enforces a single
`power-domains` entry and disallows the `power-domain-names` property.
Link: https://lore.kernel.org/all/4d79c8dd-c5fb-442c-ac65-37e7176b0cdd@linaro.org/ [1]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250822-apr_14_for_sending-v13-2-af656f7cc6c3@samsung.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Update the Imagination PVR DRM driver to leverage the pwrseq framework
for managing the complex power sequence of the GPU on the T-HEAD TH1520
SoC.
To cleanly separate platform-specific logic from the generic driver,
this patch introduces an `init` callback to the `pwr_power_sequence_ops`
struct. This allows for different power management strategies to be
selected at probe time based on the device's compatible string.
A `pvr_device_data` struct, associated with each compatible in the
of_device_id table, points to the appropriate ops table (manual or
pwrseq).
At probe time, the driver now calls the `->init()` op. For pwrseq-based
platforms, this callback calls `devm_pwrseq_get("gpu-power")`, deferring
probe if the sequencer is not yet available. For other platforms, it
falls back to the existing manual clock and reset handling. The runtime
PM callbacks continue to call the appropriate functions via the ops
table.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250822-apr_14_for_sending-v13-1-af656f7cc6c3@samsung.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
vfs_ioctl() is no longer called by anything outside of fs/ioctl.c, so
remove the global symbol and export as it is not needed.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/2025083038-carving-amuck-a4ae@gregkh
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a apic->teardown() callback to disable Secure AVIC before rebooting into
the new kernel. This ensures that the new kernel does not access the old APIC
backing page which was allocated by the previous kernel.
Such accesses can happen if there are any APIC accesses done during the guest
boot before Secure AVIC driver probe is done by the new kernel (as Secure AVIC
would have remained enabled in the Secure AVIC control MSR).
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828112008.209013-1-Neeraj.Upadhyay@amd.com
Secure AVIC accelerates the guest's EOI MSR writes for edge-triggered
interrupts.
For level-triggered interrupts, EOI MSR writes trigger a #VC exception with
an SVM_EXIT_AVIC_UNACCELERATED_ACCESS error code. To complete EOI handling,
the #VC exception handler would need to trigger a GHCB protocol MSR write
event to notify the hypervisor about completion of the level-triggered
interrupt. Hypervisor notification is required for cases like emulated
IO-APIC, to complete and clear interrupt in the IO-APIC's interrupt state.
However, #VC exception handling adds extra performance overhead for APIC
register writes. In addition, for Secure AVIC, some unaccelerated APIC
register MSR writes are trapped, whereas others are faulted.
This results in additional complexity in #VC exception handling for
unaccelerated APIC MSR accesses. So, directly do a GHCB protocol based APIC
EOI MSR write from apic->eoi() callback for level-triggered interrupts.
Use WRMSR for edge-triggered interrupts, so that hardware re-evaluates any
pending interrupt which can be delivered to the guest vCPU. For
level-triggered interrupts, re-evaluation happens on return from VMGEXIT
corresponding to the GHCB event for APIC EOI MSR write.
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111654.208987-1-Neeraj.Upadhyay@amd.com
The Hypervisor needs information about the current state of the LVT registers
for device emulation and NMIs. So, forward reads and write of these registers
to the hypervisor for Secure AVIC enabled guests.
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111356.208972-1-Neeraj.Upadhyay@amd.com
Now that support to send NMI IPI and support to inject NMI from the hypervisor
has been added, set V_NMI_ENABLE in the VINTR_CTRL field of the VMSA to enable
NMI for Secure AVIC guests.
[ bp: Zap useless brackets. ]
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111315.208959-1-Neeraj.Upadhyay@amd.com
Secure AVIC requires the "AllowedNmi" bit in the Secure AVIC Control MSR to be
set for an NMI to be injected from the hypervisor. So set it.
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111243.208946-1-Neeraj.Upadhyay@amd.com
Secure AVIC introduces a new field in the APIC backing page "NmiReq" that has
to be set by the guest to request a NMI IPI through APIC_ICR write.
Add support to set NmiReq appropriately to send NMI IPI.
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111213.208933-1-Neeraj.Upadhyay@amd.com
Virtual GIF (VGIF) provides masking capability for when virtual interrupts
(virtual maskable interrupts, virtual NMIs) can be taken by the guest vCPU.
The Secure AVIC hardware reads VGIF state from the vCPU's VMSA. So, set VGIF for
secondary CPUs (the configuration for the boot CPU is done by the hypervisor),
to unmask delivery of virtual interrupts to the vCPU.
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828111141.208920-1-Neeraj.Upadhyay@amd.com
Secure AVIC requires the LAPIC timer to be emulated by the hypervisor. KVM
already supports emulating the LAPIC timer using hrtimers. In order to emulate
it, APIC_LVTT, APIC_TMICT and APIC_TDCR register values need to be propagated
to the hypervisor for arming the timer. APIC_TMCCT register value has to be
read from the hypervisor, which is required for calibrating the APIC timer.
So, read/write all APIC timer registers from/to the hypervisor.
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828110926.208866-1-Neeraj.Upadhyay@amd.com
Secure AVIC hardware accelerates only Self-IPI, i.e. on WRMSR to APIC_SELF_IPI
and APIC_ICR (with destination shorthand equal to Self) registers, hardware
takes care of updating the APIC_IRR in the APIC backing page of the vCPU.
For other IPI types (cross-vCPU, broadcast IPIs), software needs to take care
of updating the APIC_IRR state of the target vCPUs and to ensure that the
target vCPUs notice the new pending interrupt.
Add new callbacks in the Secure AVIC driver for sending IPI requests. These
callbacks update the IRR in the target guest vCPU's APIC backing page. To
ensure that the remote vCPU notices the new pending interrupt, reuse the GHCB
MSR handling code in vc_handle_msr() to issue APIC_ICR MSR-write GHCB protocol
event to the hypervisor.
For Secure AVIC guests, on APIC_ICR write MSR exits, the hypervisor notifies
the target vCPU by either sending an AVIC doorbell (if target vCPU is running)
or by waking up the non-running target vCPU.
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/20250828110824.208851-1-Neeraj.Upadhyay@amd.com
