[ Upstream commit cd2fd6eab4 ]
Not all devices have an ACPI companion fwnode, so adev might be NULL. This
can e.g. (theoretically) happen when a user manually binds one of
the int3472 drivers to another i2c/platform device through sysfs.
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209220522.25288-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcbd621567 ]
kmemleak noticed that the iopf queue allocated deep down within
arm_smmu_init_structures() can be leaked by a subsequent error return
from arm_smmu_device_probe(). Furthermore, after arm_smmu_device_reset()
we will also leave the SMMU enabled with an empty Stream Table, silently
blocking all DMA. This proves rather annoying for debugging said probe
failure, so let's handle it a bit better by putting the SMMU back into
(more or less) the same state as if it hadn't probed at all.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5137901958471cf67f2fad5c2229f8a8f1ae901a.1733406914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4231473890 ]
Add the compatible for the separate IOMMU on SDM670 for the Adreno GPU.
This IOMMU has the compatible strings:
"qcom,sdm670-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"
While the SMMU 500 doesn't need an entry for this specific SoC, the
SMMU v2 compatible should have its own entry, as the fallback entry in
arm-smmu.c handles "qcom,smmu-v2" without per-process page table support
unless there is an entry here. This entry can't be the
"qcom,adreno-smmu" compatible because dedicated GPU IOMMUs can also be
SMMU 500 with different handling.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241114004713.42404-6-mailingradian@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7662f0e5d5 ]
In addition to changing the DMI match to examine the product name rather
than the SKU, this adds the quirk to inform the machine driver to not
bind in the cs42l43 microphone DAI link.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b5bc2ec9a ]
Now that the following fix:
d0ceea662d ("x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables")
stops kernel_ident_mapping_init() from scribbling over the end of a
4KiB PGD by assuming the following 4KiB will be a userspace PGD,
there's no good reason for the kexec PGD to be part of a single
8KiB allocation with the control_code_page.
( It's not clear that that was the reason for x86_64 kexec doing it that
way in the first place either; there were no comments to that effect and
it seems to have been the case even before PTI came along. It looks like
it was just a happy accident which prevented memory corruption on kexec. )
Either way, it definitely isn't needed now. Just allocate the PGD
separately on x86_64, like i386 already does.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20241205153343.3275139-6-dwmw2@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 569922b82c ]
Each cpu DAI should associate with a widget. However, the topology might
not create the right number of DAI widgets for aggregated amps. And it
will cause NULL pointer deference.
Check that the DAI widget associated with the CPU DAI is valid to prevent
NULL pointer deference due to missing DAI widgets in topologies with
aggregated amps.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241203104853.56956-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 681eb2beb3 ]
We are missing netif_napi_del() and am65_cpsw_nuss_free_tx/rx_chns()
in error path when am65_cpsw_nuss_init_tx/rx_chns() is used anywhere
other than at probe(). i.e. am65_cpsw_nuss_update_tx_rx_chns and
am65_cpsw_nuss_resume()
As reported, in am65_cpsw_nuss_update_tx_rx_chns(),
if am65_cpsw_nuss_init_tx_chns() partially fails then
devm_add_action(dev, am65_cpsw_nuss_free_tx_chns,..) is added
but the cleanup via am65_cpsw_nuss_free_tx_chns() will not run.
Same issue exists for am65_cpsw_nuss_init_tx/rx_chns() failures
in am65_cpsw_nuss_resume() as well.
This would otherwise require more instances of devm_add/remove_action
and is clearly more of a distraction than any benefit.
So, drop devm_add/remove_action for am65_cpsw_nuss_free_tx/rx_chns()
and call am65_cpsw_nuss_free_tx/rx_chns() and netif_napi_del()
where required.
Reported-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Closes: https://lore.kernel.org/all/m4rhkzcr7dlylxr54udyt6lal5s2q4krrvmyay6gzgzhcu4q2c@r34snfumzqxy/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-1-91a29c97e569@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fe71fda89 ]
On a 32bit system the "keylen + sizeof(struct tipc_aead_key)" math could
have an integer wrapping issue. It doesn't matter because the "keylen"
is checked on the next line, but just to make life easier for static
analysis tools, let's re-order these conditions and avoid the integer
overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f840399395 ]
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10fad79846 ]
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a0c37e44 ]
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250114083514.258379-1-quic_yuanjiey@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53078a736f ]
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b6f6593aa ]
Currently, the driver is seriously broken with respect to the
hibernation (S4): after image restore the device is back into
IPC_MEM_EXEC_STAGE_BOOT (which AFAIK means bootloader stage) and needs
full re-launch of the rest of its firmware, but the driver restore
handler treats the device as merely sleeping and just sends it a
wake-up command.
This wake-up command times out but device nodes (/dev/wwan*) remain
accessible.
However attempting to use them causes the bootloader to crash and
enter IPC_MEM_EXEC_STAGE_CD_READY stage (which apparently means "a crash
dump is ready").
It seems that the device cannot be re-initialized from this crashed
stage without toggling some reset pin (on my test platform that's
apparently what the device _RST ACPI method does).
While it would theoretically be possible to rewrite the driver to tear
down the whole MUX / IPC layers on hibernation (so the bootloader does
not crash from improper access) and then re-launch the device on
restore this would require significant refactoring of the driver
(believe me, I've tried), since there are quite a few assumptions
hard-coded in the driver about the device never being partially
de-initialized (like channels other than devlink cannot be closed,
for example).
Probably this would also need some programming guide for this hardware.
Considering that the driver seems orphaned [1] and other people are
hitting this issue too [2] fix it by simply unbinding the PCI driver
before hibernation and re-binding it after restore, much like
USB_QUIRK_RESET_RESUME does for USB devices that exhibit a similar
problem.
Tested on XMM7360 in HP EliteBook 855 G7 both with s2idle (which uses
the existing suspend / resume handlers) and S4 (which uses the new code).
[1]: https://lore.kernel.org/all/c248f0b4-2114-4c61-905f-466a786bdebb@leemhuis.info/
[2]:
https://github.com/xmm7360/xmm7360-pci/issues/211#issuecomment-1804139413
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://patch.msgid.link/e60287ebdb0ab54c4075071b72568a40a75d0205.1736372610.git.mail@maciej.szmigiero.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c0e00a391 ]
The GHES driver overrides the panic= setting by force-rebooting the
system after a fatal hw error has been reported. The intent being that
such an error would be reported earlier.
However, this is not optimal when a hard-to-debug issue requires long
time to reproduce and when that happens, the box will get rebooted after
30 seconds and thus destroy the whole hw context of when the error
happened.
So rip out the default GHES panic timeout and honor the global one.
In the panic disabled (panic=0) case, the error will still be logged to
dmesg for later inspection and if panic after a hw error is really
required, then that can be controlled the usual way - use panic= on the
cmdline or set it in the kernel .config's CONFIG_PANIC_TIMEOUT.
Reported-by: Feng Tang <feng.tang@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250113125224.GFZ4UMiNtWIJvgpveU@fat_crate.local
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfd74cd1fb ]
When a 400KHz freq is used on this model of ELAN touchpad in Linux,
excessive smoothing (similar to when the touchpad's firmware detects
a noisy signal) is sometimes applied. As some devices' (e.g, Lenovo
V15 G4) ACPI tables specify a 400KHz frequency for this device and
some I2C busses (e.g, Designware I2C) default to a 400KHz freq,
force the speed to 100KHz as a workaround.
For future investigation: This problem may be related to the default
HCNT/LCNT values given by some busses' drivers, because they are not
specified in the aforementioned devices' ACPI tables, and because
the device works without issues on Windows at what is expected to be
a 400KHz frequency. The root cause of the issue is not known.
Signed-off-by: Randolph Ha <rha051117@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80e96206a3 ]
A caller of iwl_acpi_get_dsm_object must free the returned object.
iwl_acpi_get_dsm_integer returns immediately without freeing
it if the expected size is more than 8 bytes. Fix that.
Note that with the current code this will never happen, since the caller
of iwl_acpi_get_dsm_integer already checks that the expected size if
either 1 or 4 bytes, so it can't exceed 8 bytes.
While at it, print the DSM value instead of the return value, as this
was the intention in the first place.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.bf61eaab99f8.Ibdc5df02f885208c222456d42c889c43b7e3b2f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e61e6c415b ]
The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5e65ae557 ]
This device sometimes doesn't send touch release signals when moving
from >=2 fingers to <2 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
Signed-off-by: Enze Xie <enze@nfschina.com>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0daa521a1c ]
The layout struct of efuse should not do address alignment by compiler.
Otherwise it leads unexpected layout and size for certain arch suc as arm.
In x86-64, the results are identical before and after this patch.
Also adjust bit-field to prevent over adjacent byte to avoid warning:
rtw88/rtw8822b.h:66:1: note: offset of packed bit-field `res2` has changed in GCC 4.4
66 | } __packed;
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120131.qk0x6OhE-lkp@intel.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241212054203.135046-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e89d21f81 ]
On N4100 / N4120 Gemini Lake SoCs the ISA bridge PCI device-id is 31e8
rather the 3197 found on e.g. the N4000 / N4020.
While at fix the existing GLK PCI-id table entry breaking the table
being sorted by device-id.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241114193808.110132-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df7546fc0 ]
syzbot is reporting too large allocation warning at tomoyo_write_control(),
for one can write a very very long line without new line character. To fix
this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE,
for practically a valid line should be always shorter than 32KB where the
"too small to fail" memory-allocation rule applies.
One might try to write a valid line that is longer than 32KB, but such
request will likely fail with -ENOMEM. Therefore, I feel that separately
returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant.
There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE.
Reported-by: syzbot+7536f77535e5210a5c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7536f77535e5210a5c76
Reported-by: Leo Stone <leocstone@gmail.com>
Closes: https://lkml.kernel.org/r/20241216021459.178759-2-leocstone@gmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f4a0948c3 ]
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0202dfbdc5 ]
Enable SDHCI_QUIRK_NO_LED quirk for S32G2/S32G3 variants as the controller
does not have a LED signal line.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Message-ID: <20241125083357.1041949-1-ciprianmarian.costea@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a44f8da2 ]
The card-quirk was added to limit the clock-rate for a card with UHS-mode
support, although let's respect the quirk for non-UHS mode too, to make the
behaviour consistent.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Message-ID: <1732268242-72799-1-git-send-email-shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ca459eaba ]
Currently tun checks the group permission even if the user have matched.
Besides going against the usual permission semantic, this has a
very interesting implication: if the tun group is not among the
supplementary groups of the tun user, then effectively no one can
access the tun device. CAP_SYS_ADMIN still can, but its the same as
not setting the tun ownership.
This patch relaxes the group checking so that either the user match
or the group match is enough. This avoids the situation when no one
can access the device even though the ownership is properly set.
Also I simplified the logic by removing the redundant inversions:
tun_not_capable() --> !tun_capable()
Signed-off-by: Stas Sergeev <stsp2@yandex.ru>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241205073614.294773-1-stsp2@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b98caea39 ]
In the original flow, the crystal_cap might be calculated as a negative
value and set as an overflow value. Therefore, we added a check to limit
the calculated crystal_cap value. Additionally, we shrank the crystal_cap
adjustment according to specific CFO.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e31b759b0 ]
In the loop of __rb_map_vma(), the 's' variable is calculated from the
same logic that nr_pages is and they both come from nr_subbufs. But the
relationship is not obvious and there's a WARN_ON_ONCE() around the 's'
variable to make sure it never becomes equal to nr_subbufs within the
loop. If that happens, then the code is buggy and needs to be fixed.
The 'page' variable is calculated from cpu_buffer->subbuf_ids[s] which is
an array of 'nr_subbufs' entries. If the code becomes buggy and 's'
becomes equal to or greater than 'nr_subbufs' then this will be an out of
bounds hit before the WARN_ON() is triggered and the code exiting safely.
Make the 'page' initialization consistent with the code logic and assign
it after the out of bounds check.
Link: https://lore.kernel.org/20250110162612.13983-1-aha310510@gmail.com
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
[ sdr: rewrote change log ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abc0ad6d08 ]
[why]
Underflow and flickering was occuring due to high scaling ratios
when resizing videos.
[how]
Limit the scaling ratios by increasing the max scaling factor
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4479aecf6 ]
Commit 24909d9ec7 ("drm/amd/display: Overwriting dualDPP UBF values
before usage") added a new warning in dml2/display_mode_core.c when
building allmodconfig with clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:6268:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Werror,-Wframe-larger-than]
6268 | static void dml_prefetch_check(struct display_mode_lib_st *mode_lib)
| ^
Commit be4e350931 ("drm/amd/display: DML21 Reintegration For Various
Fixes") introduced one in dml2_core/dml2_core_dcn4_calcs.c with the same
configuration:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: error: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than]
7236 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
In the case of the first warning, the stack usage was already at the
limit at the parent change, so the offending change was rather
innocuous. In the case of the second warning, there was a rather
dramatic increase in stack usage compared to the parent:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7032:13: error: stack frame size (2696) exceeds limit (2048) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than]
7032 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
This is an unfortunate interaction between an issue with stack slot
reuse in LLVM that gets exacerbated by sanitization (which gets enabled
with all{mod,yes}config) and function calls using a much higher number
of parameters than is typical in the kernel, necessitating passing most
of these values on the stack.
While it is possible that there should be source code changes to address
these warnings, this code is difficult to modify for various reasons, as
has been noted in other changes that have occurred for similar reasons,
such as commit 6740ec97bc ("drm/amd/display: Increase frame warning
limit with KASAN or KCSAN in dml2").
Increase the frame larger than limit when compile testing with clang and
the sanitizers enabled to avoid this breakage in all{mod,yes}config, as
they are commonly used and valuable testing targets. While it is not the
best to hide this issue, it is not really relevant when compile testing,
as the sanitizers are commonly stressful on optimizations and they are
only truly useful at runtime, which COMPILE_TEST states will not occur
with the current build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412121748.chuX4sap-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f09ff307c7 ]
syzbot attempts to write a buffer with a large size to a sysfs entry
with writes handled by handle_policy_update(), triggering a warning
in kmalloc.
Check the size specified for write buffers before allocating.
Reported-by: syzbot+4eb7a741b3216020043a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4eb7a741b3216020043a
Signed-off-by: Leo Stone <leocstone@gmail.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f9eef9ec1 ]
HDCP must disabled encryption and restart authentication after
waiting KSV for 5s.
The original method uses a counter in a waitting loop that may
wait much longer than it is supposed to.
Use time_after() for KSV wait timeout.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-9-e0fdd4844703@ite.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c01b0bae2 ]
When starting HDCP authentication, HDCP encryption should be enabled
when R0'is checked.
Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails
will restart HDCP.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fd2ff47d8 ]
When HDCP is activated,
a DisplayPort source receiving CP_IRQ from the sink
shall check Bstatus from DPCD and process the corresponding value
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34db5a3261 ]
For CPX mode, each KFD node has interrupt worker to process ih_fifo to
send events to user space. Currently all interrupt workers of same adev
queue to same CPU, all workers execution are actually serialized and
this cause KFD ih_fifo overflow when CPU usage is high.
Use per-GPU unbounded highpri queue with number of workers equals to
number of partitions, let queue_work select the next CPU round robin
among the local CPUs of same NUMA.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b7271e5c ]
The sdma context empty interrupt is dropped in amdgpu_irq_dispatch
as unregistered interrupt src_id 243, this interrupt accounts to 1/3 of
total interrupts and causes IH primary ring overflow when running
stressful benchmark application. Disable this interrupt has no side
effect found.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e56ad45e99 ]
Source --> DP2.1 MST hub --> DP1.4/2.1 monitor
When change from DP1.4 to DP2.1 from monitor manual, modes higher than
4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all
the modes up to 4k240 available to be enabled by dsc passthrough.
[why]
Compared to DP1.4 link from hub to monitor, DP2.1 link has larger
full_pbn value that causes overflow in the process of doing conversion
from pbn to kbps.
[how]
Change the data type accordingly to fit into the data limit during
conversion calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a9a93b16 ]
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-10-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e99c0b517b ]
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-9-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b54c14f824 ]
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-8-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
