[ Upstream commit 5b1413f00b ]
There is a check on the retry counter invalid_buf_id_retry that is always
false because invalid_buf_id_retry is initialized to zero on each iteration
of a while-loop. Fix this by initializing the retry counter before the
while-loop starts.
Addresses-Coverity: ("Logically dead code")
Fixes: b4a967b7d0 ("wil6210: reset buff id in status message after completion")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8a595a87e ]
When ath10k_qmi_init() fails, the error handling does not free the irq
resources, which causes an issue if we EPROBE_DEFER as we'll attempt to
(re-)register irqs which are already registered.
Fix this by doing a power off since we just powered on the hardware, and
freeing the irqs as error handling.
Fixes: ba94c753cc ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c8bc91488 ]
Currently tx->bytes is being freed r->num_transactions number of
times because tx is not being set correctly. Fix this by setting
tx to &r->transactions[i] so that the correct objects are being
freed on each loop iteration.
Addresses-Coverity: ("Double free")
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120173509.347490-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1a5e521c ]
psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
dimensions.
When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.
Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2debf0852 ]
unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of
netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry
to fl_policy.
Fixes: 5b33f48842 ("net/flower: Introduce hardware offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1afa3cc90f ]
unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size
of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper
entry to mall_policy.
Fixes: b87f7936a9 ("net/sched: Add match-all classifier hw offloading.")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04fb91243a ]
Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.
Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f90522591 ]
Recent months, our customer reported several kernel crashes all
preceding with following message:
NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out
Error message of one of those crashes:
BUG: unable to handle kernel paging request at ffffffffa007e090
After analyzing severl vmcores, I found that most of crashes are
caused by memory corruption. And all the corrupted memory areas
are overwritten by data of network packets. Moreover, I also found
that the tx queues were enabled over watchdog reset.
After going through the source code, I found that in enic_stop(),
the tx queues stopped by netif_tx_disable() could be woken up over
a small time window between netif_tx_disable() and the
napi_disable() by the following code path:
napi_poll->
enic_poll_msix_wq->
vnic_cq_service->
enic_wq_service->
netif_wake_subqueue(enic->netdev, q_number)->
test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)
In turn, upper netowrk stack could queue skb to ENIC NIC though
enic_hard_start_xmit(). And this might introduce some race condition.
Our customer comfirmed that this kind of kernel crash doesn't occur over
90 days since they applied this patch.
Signed-off-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad1e03b2b3 ]
The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.
This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.
This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.
Reproducer Python script (requires BCC and Scapy):
from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex
SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable
def client():
time.sleep(2)
# Sniffing on the sender causes skb_cloned() to be set
s = AsyncSniffer()
s.start()
for p in range(10):
sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
verbose=False)
time.sleep(0.1)
s.stop()
return 0
def server(mode):
prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
func = prog.load_func("dummy_drop", BPF.XDP)
prog.attach_xdp("a_to_b", func, mode)
time.sleep(1)
s = sniff(iface="a_to_b", count=10, timeout=15)
if len(s):
print(f"Got {len(s)} packets - should have gotten 0")
return 1
else:
print("Got no packets - as expected")
return 0
if len(sys.argv) < 2:
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
if sys.argv[1] == "client":
sys.exit(client())
elif sys.argv[1] == "server":
mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
sys.exit(server(mode))
else:
try:
mode = sys.argv[1]
if mode not in ('skb', 'drv'):
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
print(f"Running in {mode} mode")
for cmd in [
'ip netns add netns_a',
'ip netns add netns_b',
'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
# Disable ipv6 to make sure there's no address autoconf traffic
'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
'ip -n netns_a link set dev a_to_b up',
'ip -n netns_b link set dev b_to_a up']:
subprocess.check_call(shlex.split(cmd))
server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))
client.wait()
server.wait()
sys.exit(server.returncode)
finally:
subprocess.run(shlex.split("ip netns delete netns_a"))
subprocess.run(shlex.split("ip netns delete netns_b"))
Fixes: d445516966 ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <shoracek@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9073d10b09 ]
Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be
inverted compared to DT/platform-specified polarity. The flag is not used
after init in GPIO mode anyway. No functional changes intended.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3a5bcb4a1 ]
Add possibility to toggle active-low flag of a gpio descriptor. This is
useful for compatibility code, where defaults are inverted vs DT gpio
flags or the active-low flag is taken from elsewhere.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/7ce0338e01ad17fa5a227176813941b41a7c35c1.1576031637.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2269ea14e ]
In order to better manage our delegation caching, add a counter
to track the number of active delegations.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9392a27d88 ]
Some work items need this for relative path lookup, make it available
like the other inherited credentials/mm/etc.
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57c32ea42f ]
Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.
For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).
[root@hades mnt_ext4]# repquota -P -a
*** Report for project quotas on device /dev/loop0
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
Project used soft hard grace used soft hard grace
----------------------------------------------------------------------
0 -- 13 0 0 2 0 0
123 -- 10237 20480 10240 5 200 100
The result of df command as below:
[root@hades mnt_ext4]# df -h test_dir
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 20M 10M 10M 50% /home/cgxu/test/mnt_ext4
Even though it looks like there is another 10M free space to use,
if we write new data to diretory test_dir(inherit project id),
the write will fail with errno(-EDQUOT).
After this patch, the df result looks like below.
[root@hades mnt_ext4]# df -h test_dir
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 10M 10M 3.0K 100% /home/cgxu/test/mnt_ext4
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191016022501.760-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 88a9c66d99 upstream.
The rc6 residency starts ticking from 0 from BIOS POST, but the kernel
starts measuring the time from its boot. If we start measuruing
I915_PMU_RC6_RESIDENCY while the GT is idle, we start our sampling from
0 and then upon first activity (park/unpark) add in all the rc6
residency since boot. After the first park with the sampler engaged, the
sleep/active counters are aligned.
v2: With a wakeref to be sure
Closes: https://gitlab.freedesktop.org/drm/intel/issues/973
Fixes: df6a420535 ("drm/i915/pmu: Ensure monotonic rc6")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200114105648.2172026-1-chris@chris-wilson.co.uk
(cherry picked from commit f4e9894b69)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf913e9683 upstream.
This reverts commit 9db9c0cf58.
Setting mode_config.allow_fb_modifiers manually is completely
unnecessary. It is set automatically by drm_universal_plane_init() based
on the fact if modifier list is provided or not. Even more, it breaks
DE2 and DE3 as they don't support any modifiers beside linear. Modifiers
aware applications can be confused by provided empty modifier list - at
least linear modifier should be included, but it's not for DE2 and DE3.
Fixes: 9db9c0cf58 ("drm/sun4i: drv: Allow framebuffer modifiers in mode config")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126065937.9564-1-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d63944f82 upstream.
Ensure we don't release the delegation cred during the call to
nfs4_proc_delegreturn().
Fixes: ee05f45677 ("NFSv4: Fix races between open and delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd1b659d8c upstream.
Turning caching off for writes on the server should improve performance.
Fixes: fba83f3411 ("NFS: Pass "privileged" value to nfs4_init_sequence()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80cc7bb6c1 upstream.
For data collected on machines with front end stalled cycles supported,
such as found on modern AMD CPU families, commit 146540fb54 ("perf
stat: Always separate stalled cycles per insn") introduces a new line in
CSV output with a leading comma that upsets some automated scripts.
Scripts have to use "-e ex_ret_instr" to work around this issue, after
upgrading to a version of perf with that commit.
We could add "if (have_frontend_stalled && !config->csv_sep)" to the not
(total && avg) else clause, to emphasize that CSV users are usually
scripts, and are written to do only what is needed, i.e., they wouldn't
typically invoke "perf stat" without specifying an explicit event list.
But - let alone CSV output - why should users now tolerate a constant
0-reporting extra line in regular terminal output?:
BEFORE:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
181,110,981 instructions # 0.58 insn per cycle
# 0.00 stalled cycles per insn
309,876,469 cycles
1.002202582 seconds time elapsed
The user would not like to see the now permanent:
"0.00 stalled cycles per insn"
line fixture, as it gives no useful information.
So this patch removes the printing of the zeroed stalled cycles line
altogether, almost reverting the very original commit fb4605ba47
("perf stat: Check for frontend stalled for metrics"), which seems like
it was written to normalize --metric-only column output of common Intel
machines at the time: modern Intel machines have ceased to support the
genericised frontend stalled metrics AFAICT.
AFTER:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
244,071,432 instructions # 0.69 insn per cycle
355,353,490 cycles
1.001862516 seconds time elapsed
Output behaviour when stalled cycles is indeed measured is not affected
(BEFORE == AFTER):
$ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1
Performance counter stats for 'system wide':
247,227,799 instructions # 0.63 insn per cycle
# 0.26 stalled cycles per insn
394,745,636 cycles
63,194,485 stalled-cycles-frontend # 16.01% frontend cycles idle
1.002079770 seconds time elapsed
Fixes: 146540fb54 ("perf stat: Always separate stalled cycles per insn")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 684c0422da upstream.
SDM 27.3.4 states that the 'pending debug exceptions' VMCS field will
be populated if a VM-exit caused by an INIT signal takes priority over a
debug-trap. Emulate this behavior when synthesizing an INIT signal
VM-exit into L1.
Fixes: 4b9852f4f3 ("KVM: x86: Fix INIT signal handling in various CPU states")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 307f1cfa26 upstream.
KVM defines the #DB payload as compatible with the 'pending debug
exceptions' field under VMX, not DR6. Mask off bit 12 when applying the
payload to DR6, as it is reserved on DR6 but not the 'pending debug
exceptions' field.
Fixes: f10c729ff9 ("kvm: vmx: Defer setting of DR6 until #DB delivery")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3543d7ddd5 upstream.
The interrupt map for the FVP's PCI node is missing the
parent-unit-address cells for each of the INTx entries, leading to the
kernel code failing to parse the entries correctly.
Add the missing zero cells, which are pretty useless as far as the GIC
is concerned, but that the spec requires. This allows INTx to be usable
on the model, and VFIO to work correctly.
Fixes: fa083b99eb ("arm64: dts: fast models: Add DTS fo Base RevC FVP")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b20bc2fe4 upstream.
For the old mount API, the module parameters parseing function will
be called in ceph_mount() and also just after the default posix acl
flag set, so we can control to enable/disable it via the mount option.
But for the new mount API, it will call the module parameters
parseing function before ceph_get_tree(), so the posix acl will always
be enabled.
Fixes: 82995cc6c5 ("libceph, rbd, ceph: convert to use the new mount API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f6166aaf1 upstream.
Fix display for sec=krb5i which was wrongly interleaved by cruid,
resulting in string "sec=krb5,cruid=<...>i" instead of
"sec=krb5i,cruid=<...>".
Fixes: 96281b9e46 ("smb3: for kerberos mounts display the credential uid used")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bf973ff9b upstream.
Previously I intended to ignore quiet mode in probe response, however
I ended up ignoring it instead for action frames. As a matter of fact,
this path isn't invoked for probe responses to start with. Just revert
this patch.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 7976b1e9e3 ("mac80211: ignore quiet mode in probe")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-15-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf2b012c90 upstream.
Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to
bits 6/5. This fixs a LTC297X family bug where polling always returns
not busy even when the part is busy. This fixes a LTC388X and
LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was
not polled, which can lead to NACKing of commands. LTC388X and
LTM467X modules now poll BUSY and PEND, increasing reliability by
eliminating NACKing of commands.
Signed-off-by: Mike Jones <michael-a1.jones@analog.com>
Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com
Fixes: e04d1ce9bb ("hwmon: (ltc2978) Add polling for chips requiring it")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f861854e1b upstream.
Perf doesn't take the left period into account when auto-reload is
enabled with fixed period sampling mode in context switch.
Here is the MSR trace of the perf command as below.
(The MSR trace is simplified from a ftrace log.)
#perf record -e cycles:p -c 2000000 -- ./triad_loop
//The MSR trace of task schedule out
//perf disable all counters, disable PEBS, disable GP counter 0,
//read GP counter 0, and re-enable all counters.
//The counter 0 stops at 0xfffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value fffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
//perf disable all counters, enable and set GP counter 0,
//enable PEBS, and re-enable all counters.
//0xffffffe17b80 (-2000000) is written to GP counter 0.
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
When the same task schedule in again, the counter should starts from
previous left. However, it starts from the fixed period -2000000 again.
A special variant of intel_pmu_save_and_restart() is used for
auto-reload, which doesn't update the hwc->period_left.
When the monitored task schedules in again, perf doesn't know the left
period. The fixed period is used, which is inaccurate.
With auto-reload, the counter always has a negative counter value. So
the left period is -value. Update the period_left in
intel_pmu_save_and_restart_reload().
With the patch:
//The MSR trace of task schedule out
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value ffffffe25cbc
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
Fixes: d31fc13fdc ("perf/x86/intel: Fix event update for auto-reload")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d5a2f913b upstream.
I see the following lockdep splat in the qcom pinctrl driver when
attempting to suspend the device.
WARNING: possible recursive locking detected
5.4.11 #3 Tainted: G W
--------------------------------------------
cat/3074 is trying to acquire lock:
ffffff81f49804c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94
but task is already holding lock:
ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by cat/3074:
#0: ffffff81f01d9420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4
#1: ffffff81bd7d2080 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc
#2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc
#3: ffffffe411a41d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348
#4: ffffff81f1c5e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c
#5: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94
stack backtrace:
CPU: 5 PID: 3074 Comm: cat Tainted: G W 5.4.11 #3
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
dump_backtrace+0x0/0x174
show_stack+0x20/0x2c
dump_stack+0xc8/0x124
__lock_acquire+0x460/0x2388
lock_acquire+0x1cc/0x210
_raw_spin_lock_irqsave+0x64/0x80
__irq_get_desc_lock+0x64/0x94
irq_set_irq_wake+0x40/0x144
qpnpint_irq_set_wake+0x28/0x34
set_irq_wake_real+0x40/0x5c
irq_set_irq_wake+0x70/0x144
pm8941_pwrkey_suspend+0x34/0x44
platform_pm_suspend+0x34/0x60
dpm_run_callback+0x64/0xcc
__device_suspend+0x310/0x41c
dpm_suspend+0xf8/0x298
dpm_suspend_start+0x84/0xb4
suspend_devices_and_enter+0xbc/0x620
pm_suspend+0x210/0x348
state_store+0xb0/0x108
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x4c/0x64
kernfs_fop_write+0x15c/0x1fc
__vfs_write+0x54/0x18c
vfs_write+0xe4/0x1a4
ksys_write+0x7c/0xe4
__arm64_sys_write+0x20/0x2c
el0_svc_common+0xa8/0x160
el0_svc_handler+0x7c/0x98
el0_svc+0x8/0xc
Set a lockdep class when we map the irq so that irq_set_wake() doesn't
warn about a lockdep bug that doesn't exist.
Fixes: 12a9eeaebb ("spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200121183748.68662-1-swboyd@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2b18baca9 upstream.
It turns out that this wasn't a good idea, I hit a test failure in
hwsim due to this. That particular failure was easily worked around,
but it raised questions: if an AP needs to, for example, send action
frames to each connected station, the current limit is nowhere near
enough (especially if those stations are sleeping and the frames are
queued for a while.)
Shuffle around some bits to make more room for ack_frame_id to allow
up to 8192 queued up frames, that's enough for queueing 4 frames to
each connected station, even at the maximum of 2007 stations on a
single AP.
We take the bits from band (which currently only 2 but I leave 3 in
case we add another band) and from the hw_queue, which can only need
4 since it has a limit of 16 queues.
Fixes: 6912daed05 ("mac80211: Shrink the size of ack_frame_id to make room for tx_time_est")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200115122549.b9a4ef9f4980.Ied52ed90150220b83a280009c590b65d125d087c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b562d14064 upstream.
The check to ensure that the new written value into cpu.uclamp.{min,max}
is within range, [0:100], wasn't working because of the signed
comparison
7301 if (req.percent > UCLAMP_PERCENT_SCALE) {
7302 req.ret = -ERANGE;
7303 return req;
7304 }
# echo -1 > cpu.uclamp.min
# cat cpu.uclamp.min
42949671.96
Cast req.percent into u64 to force the comparison to be unsigned and
work as intended in capacity_from_percent().
# echo -1 > cpu.uclamp.min
sh: write error: Numerical result out of range
Fixes: 2480c09313 ("sched/uclamp: Extend CPU's cgroup controller")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200114210947.14083-1-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbd1ec0002 upstream.
The is_visible function expects the permissions associated with an
attribute of the sysfs group or 0 if an attribute is not visible.
Change the code to return the attribute permissions when the attribute
should be visible which resolves the warning:
Attribute calibrate: Invalid permissions 01
Fixes: cc12ba1872 ("Input: ili210x - optionally show calibrate sysfs attribute")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20200209145628.649409-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f8a206df7 upstream.
Clang warns:
In file included from ../arch/s390/boot/startup.c:3:
In file included from ../include/linux/elf.h:5:
In file included from ../arch/s390/include/asm/elf.h:132:
In file included from ../include/linux/compat.h:10:
In file included from ../include/linux/time.h:74:
In file included from ../include/linux/time32.h:13:
In file included from ../include/linux/timex.h:65:
../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char
[16]' to parameter of type 'char *' converts between pointers to integer
types with different sign [-Wpointer-sign]
get_tod_clock_ext(clk);
^~~
../arch/s390/include/asm/timex.h:149:44: note: passing argument to
parameter 'clk' here
static inline void get_tod_clock_ext(char *clk)
^
Change clk's type to just be char so that it matches what happens in
get_tod_clock_ext.
Fixes: 57b28f6631 ("[S390] s390_hypfs: Add new attributes")
Link: https://github.com/ClangBuiltLinux/linux/issues/861
Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ac0e6641c upstream.
When run stress tests with RXE, the following Call Traces often occur
watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0]
...
Call Trace:
<IRQ>
create_object+0x3f/0x3b0
kmem_cache_alloc_node_trace+0x129/0x2d0
__kmalloc_reserve.isra.52+0x2e/0x80
__alloc_skb+0x83/0x270
rxe_init_packet+0x99/0x150 [rdma_rxe]
rxe_requester+0x34e/0x11a0 [rdma_rxe]
rxe_do_task+0x85/0xf0 [rdma_rxe]
tasklet_action_common.isra.21+0xeb/0x100
__do_softirq+0xd0/0x298
irq_exit+0xc5/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
...
The root cause is that tasklet is actually a softirq. In a tasklet
handler, another softirq handler is triggered. Usually these softirq
handlers run on the same cpu core. So this will cause "soft lockup Bug".
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d219face90 upstream.
As per draft-hilland-iwarp-verbs-v1.0, sec 6.2.3, always initiate a CLOSE
when entering into TERM state.
In c4iw_modify_qp(), disconnect operation should only be performed when
the modify_qp call is invoked from ib_core. And all other internal
modify_qp calls(invoked within iw_cxgb4) that needs 'disconnect' should
call c4iw_ep_disconnect() explicitly after modify_qp. Otherwise, deadlocks
like below can occur:
Call Trace:
schedule+0x2f/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.5+0x2d0/0x4a0
c4iw_ep_disconnect+0x39/0x430 => tries to reacquire ep lock again
c4iw_modify_qp+0x468/0x10d0
rx_data+0x218/0x570 => acquires ep lock
process_work+0x5f/0x70
process_one_work+0x1a7/0x3b0
worker_thread+0x30/0x390
kthread+0x112/0x130
ret_from_fork+0x35/0x40
Fixes: d2c33370ae ("RDMA/iw_cxgb4: Always disconnect when QP is transitioning to TERMINATE state")
Link: https://lore.kernel.org/r/20200204091230.7210-1-krishna2@chelsio.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ea04d0df6 upstream.
When disassociating a device from umad we must ensure that the sysfs
access is prevented before blocking the fops, otherwise assumptions in
syfs don't hold:
CPU0 CPU1
ib_umad_kill_port() ibdev_show()
port->ib_dev = NULL
dev_name(port->ib_dev)
The prior patch made an error in moving the device_destroy(), it should
have been split into device_del() (above) and put_device() (below). At
this point we already have the split, so move the device_del() back to its
original place.
kernel stack
PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
RIP: 0010:ibdev_show+0x18/0x50 [ib_umad]
RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000
RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870
RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000
R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40
R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58
FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0
Call Trace:
dev_attr_show+0x15/0x50
sysfs_kf_seq_show+0xb8/0x1a0
seq_read+0x12d/0x350
vfs_read+0x89/0x140
ksys_read+0x55/0xd0
do_syscall_64+0x55/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9:
Fixes: cf7ad30302 ("IB/umad: Avoid destroying device while it is accessed")
Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a70ed0f2e6 upstream.
Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.
This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.
Fixes: 3abb33ac65 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10189e8e6f upstream.
When binding a QP with a counter and the QP state is not RESET, return
failure if the rts2rts_qp_counters_set_id is not supported by the
device.
This is to prevent cases like manual bind for Connect-IB devices from
returning success when the feature is not supported.
Fixes: d14133dd41 ("IB/mlx5: Support set qp counter")
Link: https://lore.kernel.org/r/20200126171708.5167-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0354d147e upstream.
The end of buffer check is off-by-one since the check is against
an index that is pre-incremented before a store to buf[]. Fix this
adjusting the bounds check appropriately.
Addresses-Coverity: ("Out-of-bounds write")
Fixes: 51bd6f2915 ("Add support for IPMB driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200114144031.358003-1-colin.king@canonical.com>
Reviewed-by: Asmaa Mnebhi <asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f25372ffc3 upstream.
nvme fw-activate operation will get bellow warning log,
fix it by update the parameter order
[ 113.231513] nvme nvme0: Get FW SLOT INFO log error
Fixes: 0e98719b0e ("nvme: simplify the API for getting log pages")
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bf3c97446 upstream.
The input_read function declares the size of the hex array relative to
sizeof(buf), but buf is a pointer argument of the function. The hex
array is meant to contain hexadecimal representation of the bin array.
Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz
Fixes: 5bc7f990cd ("bus: Add support for Moxtet bus")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reported-by: sohu0106 <sohu0106@126.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e33a8cfda5 upstream.
Rather than the FEATURE_ID flags. Avoids a possible reading past
the end of the array.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.5.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
