With CONFIG_HWSPINLOCK=n the of_hwspin_lock_get_id() stub returns 0
unconditionally. In sprd_adi_probe() the guard
if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0))
is false for that 0, so it takes the else branch, where the switch has no
case for 0 and lands in
default:
return dev_err_probe(&pdev->dev, ret, "failed to find hwlock id\n");
dev_err_probe() returns its err argument unchanged, so probe logs
"failed to find hwlock id" and then returns 0, reporting success.
sprd_adi_hw_init(), the restart handler and devm_spi_register_controller()
are all skipped: the device binds but no SPI controller is ever
registered.
The hardware spinlock is optional for this controller and the -ENOENT arm
already covers "no hardware spinlock supplied". Treat the stub's 0 the
same way and continue without a lock; all four users of sadi->hwlock
already test it for NULL.
This is not reachable on production kernels. Kconfig has
depends on HWSPINLOCK || (COMPILE_TEST && !HWSPINLOCK)
so the affected configuration exists only under COMPILE_TEST, where no
real hardware is present.
Found by smatch:
drivers/spi/spi-sprd-adi.c:560 sprd_adi_probe() warn: passing zero to 'dev_err_probe'
Fixes: f9adf61e98 ("spi: sprd: adi: Change hwlock to be optional")
Assisted-by: Claude:claude-opus-5
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Link: https://patch.msgid.link/20260729053543.7-1-bbnpreetsingh@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DQS is a typical SPI memory signal used to help with reading the data on
the bus at high speeds (especially in DTR mode) by avoiding clock
skews. The chip generates a clock signal synchronized with its data
output fronts, also called data strobe.
SPI NOR and SPI NAND cores must set this flag in order to indicate to
other layers that DQS is available.
Create a getter and a setter to reach this capability.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260810-winbond-nand-next-phy-tuning-v3-1-a97c3a61e675@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jisheng Zhang <jszhang@kernel.org> says:
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
Compiled testd for arm, arm64, riscv and riscv64 with below
combinations:
!PM && !PM_SLEEP
PM && !PM_SLEEP
PM && PM_SLEEP
Link: https://patch.msgid.link/20260803142003.12857-1-jszhang@kernel.org
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-40-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
At the same time, for pch_spi_pd_driver, we also switch to modern
driver.pm for pm ops.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-39-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-38-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-37-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-36-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-35-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-34-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards or
__maybe_unused.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-33-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-32-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-31-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-30-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-29-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-28-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-27-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-26-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-25-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-24-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-23-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-22-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-21-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-20-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-19-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-18-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-17-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-16-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-15-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-14-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-13-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-12-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-11-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-10-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-9-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20260803142003.12857-8-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20260803142003.12857-7-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-6-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-5-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-4-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-3-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the modern PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use __maybe_unused.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260803142003.12857-2-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the new_device and delete_device sysfs attributes on SPI
controllers:
- Documentation/spi/instantiating-devices.rst: describes when and
why this interface is needed, accepted parameters, usage examples,
and limitations.
- Documentation/ABI/testing/sysfs-class-spi-master: formal ABI
entry for both attributes.
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260803104614.2548375-3-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Development boards such as the Jetson AGX Orin expose SPI buses
on expansion headers (e.g. the 40-pin header) so that users can
connect and interact with SPI peripherals from userspace. The
standard way to get /dev/spidevB.C character device nodes for
this purpose is to register spi_device instances backed by the
spidev driver.
Today there is no viable way to do this on upstream kernels:
- The spidev driver rejects the bare "spidev" compatible
string in DT, since spidev is a Linux software interface
and not a description of real hardware.
- Vendor-specific compatible strings (e.g. "nvidia,tegra-spidev")
have been rejected by DT maintainers for the same reason.
The I2C subsystem solved an analogous problem by exposing
new_device/delete_device sysfs attributes on each adapter. Add
the same interface to SPI host controllers, so that userspace
(e.g. a systemd unit at boot) can instantiate SPI devices at
runtime without needing anything in device-tree.
The new_device file accepts:
<modalias> <chip_select> [<max_speed_hz> [<mode>]]
where chip_select is required, while max_speed_hz and mode are
optional and default to 0 if omitted. max_speed_hz == 0 is
clamped to the controller's maximum by spi_setup(); mode == 0
selects SPI mode 0 (CPOL=0, CPHA=0).
The modalias is used both as the device identifier and as a
driver_override, so that the device binds to the named driver
directly. This is necessary because some drivers like spidev
deliberately exclude generic names from their id_table.
Devices created this way are limited compared to those declared
via DT or board files:
- No IRQ is assigned (the device gets IRQ 0 / no interrupt).
- No platform_data or device properties are attached.
- No OF node is associated with the device.
These limitations are acceptable for spidev, which only needs a
registered spi_device to expose a character device to userspace.
Only devices created via new_device can be removed through
delete_device; DT and platform devices are unaffected.
The sysfs attributes are gated behind CONFIG_SPI_DYNAMIC since
this feature adds a new way of dynamically instantiating and
removing SPI devices, and the add_lock locking in
spi_unregister_controller() is already conditional on
CONFIG_SPI_DYNAMIC.
The userspace sysfs group is created manually as the last step
of spi_register_controller() and removed as the first step of
spi_unregister_controller(). Removing the group before taking
add_lock means kernfs_drain() completes any in-flight
new_device_store()/delete_device_store() calls before
add_lock is acquired, so unregister never blocks on a store
that is itself waiting for add_lock and no store can be
touching an spi_device that is about to be torn down.
Non-sysfs callers of __spi_add_device() (DT/ACPI dynamic add,
ancillary registration) continue to be protected by the
pre-existing !device_is_registered(&ctlr->dev) check added in
commit ddf75be47c ("spi: Prevent adding devices below an
unregistering controller"): device_del(&ctlr->dev) runs inside
add_lock in spi_unregister_controller() so state_in_sysfs flips
to 0 before add_lock is released.
Link: https://lore.kernel.org/linux-tegra/909f0c92-d110-4253-903e-5c81e21e12c9@nvidia.com/
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260803104614.2548375-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_spi_alloc_host() instead of spi_alloc_host() so that the spi
controller is automatically freed on probe failure or device removal.
This lets us eliminate the err_put_host label and goto error path in
probe, as well as the spi_controller_put() call in remove.
It's also a bit weird as everything in probe is using devm except the
first allocating function. Might fix an ordering issue on teardown.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260727201543.18857-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bcmbca_hsspi_resume() enables the HSSPI clock, and optionally the PLL
clock, before restarting the SPI controller queue.
If spi_controller_resume() fails, the function currently reports success
and leaves those clocks enabled. Propagate the error and disable the
clocks before returning.
Fixes: a38a2233f2 ("spi: bcmbca-hsspi: Add driver for newer HSSPI controller")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
Link: https://patch.msgid.link/20260804071904.860842-1-pengcan@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
bcm63xx_spi_resume() enables the controller clock before restarting the
SPI controller queue.
If spi_controller_resume() fails, the function currently reports success
and leaves the clock enabled. Propagate the error and disable the clock
before returning.
Fixes: b42dfed83d ("spi: add Broadcom BCM63xx SPI controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Link: https://patch.msgid.link/20260804071831.860784-1-pengcan@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
bcm63xx_hsspi_resume() enables the HSSPI clock, and optionally the PLL
clock, before restarting the SPI controller queue.
If spi_controller_resume() fails, the function currently reports success
and leaves those clocks enabled. Propagate the error and disable the
clocks before returning.
Fixes: 142168eba9 ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
Link: https://patch.msgid.link/20260804072017.860974-1-pengcan@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
