[ Upstream commit 4a6cdecaa1 ]
Since the commit e9846f5ead ("perf test: In forked mode add check that
fds aren't leaked"), the test "Breakpoint accounting" reports the error:
# perf test -vvv "Breakpoint accounting"
20: Breakpoint accounting:
--- start ---
test child forked, pid 373
failed opening event 0
failed opening event 0
watchpoints count 4, breakpoints count 6, has_ioctl 1, share 0
wp 0 created
wp 1 created
wp 2 created
wp 3 created
wp 0 modified to bp
wp max created
---- end(0) ----
Leak of file descriptor 7 that opened: 'anon_inode:[perf_event]'
A watchpoint's file descriptor was not properly released. This patch
fixes the leak.
Fixes: 032db28e5f ("perf tests: Add breakpoint accounting/modify test")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250711-perf_fix_breakpoint_accounting-v1-1-b314393023f9@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b075c0110 ]
commit 5a3e85c3c3 ("pinmux: Use sequential access to access
desc->pinmux data") tried to address the issue when two client of the
same gpio calls pinctrl_select_state() for the same functionality, was
resulting in NULL pointer issue while accessing desc->mux_owner.
However, issue was not completely fixed due to the way it was handled
and it can still result in the same NULL pointer.
The issue occurs due to the following interleaving:
cpu0 (process A) cpu1 (process B)
pin_request() { pin_free() {
mutex_lock()
desc->mux_usecount--; //becomes 0
..
mutex_unlock()
mutex_lock(desc->mux)
desc->mux_usecount++; // becomes 1
desc->mux_owner = owner;
mutex_unlock(desc->mux)
mutex_lock(desc->mux)
desc->mux_owner = NULL;
mutex_unlock(desc->mux)
This sequence leads to a state where the pin appears to be in use
(`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can
cause NULL pointer on next pin_request on the same pin.
Ensure that updates to mux_usecount and mux_owner are performed
atomically under the same lock. Only clear mux_owner when mux_usecount
reaches zero and no new owner has been assigned.
Fixes: 5a3e85c3c3 ("pinmux: Use sequential access to access desc->pinmux data")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/20250708-pinmux-race-fix-v2-1-8ae9e8a0d1a1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff7ec8dc1b ]
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner.
Link: https://lkml.kernel.org/r/20250607021353.1127963-1-wangzijie1@honor.com
Fixes: 3f61631d47 ("take care to handle NULL ->proc_lseek()")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adc353c0bf ]
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Fall back to dynamic allocation here.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Chen <chensong_2000@189.cn>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250620111215.3365305-1-arnd@kernel.org
Fixes: 4b9091e1c1 ("kernel: trace: preemptirq_delay_test: add cpu affinity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278c18a4a7 ]
hr_dev->pgdir_list and hr_dev->pgdir_mutex won't be initialized if
CQ/QP record db are not enabled, but they are also needed when using
SRQ with SRQ record db enabled. Simplified the logic by always
initailizing the reosurces.
Fixes: c9813b0b99 ("RDMA/hns: Support SRQ record doorbell")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c2ec0106c ]
ACK_REQ_FREQ indicates the number of packets (after MTU fragmentation)
HW sends before setting an ACK request. When MTU is greater than or
equal to 1024, the current ACK_REQ_FREQ value causes HW to request an
ACK for every MTU fragment. The processing of a large number of ACKs
severely impacts HW performance when sending large size payloads.
Get message length of ack_req from FW so that we can adjust this
parameter according to different situations. There are several
constraints for ACK_REQ_FREQ:
1. mtu * (2 ^ ACK_REQ_FREQ) should not be too large, otherwise it may
cause some unexpected retries when sending large payload.
2. ACK_REQ_FREQ should be larger than or equal to LP_PKTN_INI.
3. ACK_REQ_FREQ must be equal to LP_PKTN_INI when using LDCP
or HC3 congestion control algorithm.
Fixes: 56518a603f ("RDMA/hns: Modify the value of long message loopback slice")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb7fa6b6fc ]
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4abeccb8d ]
The __snp_alloc_firmware_pages() helper allocates pages in the firmware
state (alloc + rmpupdate). In case of failed rmpupdate, it tries
reclaiming pages with already changed state. This requires calling
the PSP firmware and since there is sev_cmd_mutex to guard such calls,
the helper takes a "locked" parameter so specify if the lock needs to
be held.
Most calls happen from snp_alloc_firmware_page() which executes without
the lock. However
commit 24512afa43 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
switched sev_fw_alloc() from alloc_pages() (which does not call the PSP) to
__snp_alloc_firmware_pages() (which does) but did not account for the fact
that sev_fw_alloc() is called from __sev_platform_init_locked()
(via __sev_platform_init_handle_tmr()) and executes with the lock held.
Add a "locked" parameter to __snp_alloc_firmware_pages().
Make sev_fw_alloc() use the new parameter to prevent potential deadlock in
rmp_mark_pages_firmware() if rmpupdate() failed.
Fixes: 24512afa43 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 998b41cb20 ]
hns_roce_clear_extdb_list_info() will eventually do some HW
configurations through FW, and they need to be cleared by
calling hns_roce_function_clear() when the initialization
fails.
Fixes: 7e78dd816e ("RDMA/hns: Clear extended doorbell info before using")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e68b1c0098 ]
The work_atoms should be freed after use. Add free_work_atoms() to
make sure to release all. It should use list_splice_init() when merging
atoms to prevent accessing invalid pointers.
Fixes: b1ffe8f3e0 ("perf sched: Finish latency => atom rename and misc cleanups")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a4002ec9e ]
So that it can check two pointers to the same object properly when
REFCNT_CHECKING is on.
Fixes: 78c32f4cb1 ("libperf rc_check: Add RC_CHK_EQUAL")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117e5c33b1 ]
It uses evsel->priv to save per-cpu timing information. It should be
freed when the evsel is released.
Add the priv destructor for evsel same as thread to handle that.
Fixes: 49394a2a24 ("perf sched timehist: Introduce timehist command")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc3a80c988 ]
It maintains per-cpu pointers for the current thread but it doesn't
release the refcounts.
Fixes: 5e89527869 ("perf sched: Move curr_thread initialization to perf_sched__map()")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa9fdd106b ]
In many perf sched subcommand saves priv data structure in the thread
but it forgot to free them. As it's an opaque type with 'void *', it
needs to register that knows how to free the data. In this case, just
regular 'free()' is fine.
Fixes: 04cb4fc4d4 ("perf thread: Allow tools to register a thread->priv destructor")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10d9b89203 ]
The parse_options_subcommand() allocates the usage string based on the
given subcommands. So it should reach the end of the function to free
the string to prevent memory leaks.
Fixes: 1a5efc9e13 ("libsubcmd: Don't free the usage string")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250703014942.1369397-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a45ab839f5 ]
Infineon SEMPER flash family does not support E9h opcode as Exit 4-byte
mode (EX4B). Therefore, params->set_4byte_addr_mode is not determined by
BFPT parse. Fixup it up by introducing vendor specific EX4B opcode (B8h)
and function.
Fixes: c87c9b11c5 ("mtd: spi-nor: spansion: Determine current address mode")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250612074427.22263-1-Takahiro.Kuwano@infineon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63a088e999 ]
The kcore loading creates a set of list nodes that have reference
counted references to maps of the kcore. The list node freeing in the
success path wasn't releasing the maps, add the missing puts. It is
unclear why this leak was being missed by leak sanitizer.
Fixes: 8372020996 ("perf map: Move map list node into symbol")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624190326.2038704-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fdf938168 ]
Currently perf aborts when it finds an invalid command. I guess it
depends on the environment as I have some custom commands in the path.
$ perf bad-command
perf: 'bad-command' is not a perf-command. See 'perf --help'.
Aborted (core dumped)
It's because the exclude_cmds() in libsubcmd has a use-after-free when
it removes some entries. After copying one to another entry, it keeps
the pointer in the both position. And the next copy operation will free
the later one but it's the same entry in the previous one.
For example, let's say cmds = { A, B, C, D, E } and excludes = { B, E }.
ci cj ei cmds-name excludes
-----------+--------------------
0 0 0 | A B : cmp < 0, ci == cj
1 1 0 | B B : cmp == 0
2 1 1 | C E : cmp < 0, ci != cj
At this point, it frees cmds->names[1] and cmds->names[1] is assigned to
cmds->names[2].
3 2 1 | D E : cmp < 0, ci != cj
Now it frees cmds->names[2] but it's the same as cmds->names[1]. So
accessing cmds->names[1] will be invalid.
This makes the subcmd tests succeed.
$ perf test subcmd
69: libsubcmd help tests :
69.1: Load subcmd names : Ok
69.2: Uniquify subcmd names : Ok
69.3: Exclude duplicate subcmd names : Ok
Fixes: 4b96679170 ("libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded")
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250701201027.1171561-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1db50f7b7a ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: ed10435d35 ("RDMA/erdma: Implement hierarchical MTT")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250630092346.81017-2-fourier.thomas@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce8a909669 ]
The fpfd_max frequency should be set to 450 MHz instead of 300 MHz.
Well, it actually depends on the platform speed grade but we are being
conservative for ultrascale so let's be consistent. In a following
change we will set these limits at runtime.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250519-dev-axi-clkgen-limits-v6-1-bc4b3b61d1d4@analog.com
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8631e01c2c ]
Unlike file_handle, type and len of struct fanotify_fh are u8.
Traditionally, filesystem return handle_type < 0xff, but there
is no enforecement for that in vfs.
Add a sanity check in fanotify to avoid truncating handle_type
if its value is > 0xff.
Fixes: 7cdafe6cc4 ("exportfs: check for error return value from exportfs_encode_*()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250627104835.184495-1-amir73il@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31bc94de76 ]
Zeroing out registers does not happen in the downstream kernel, and will
"tune" the repeater in surely unexpected ways since most registers don't
have a reset value of 0x0.
Stop doing that and instead just set the registers that are in the init
sequence (though long term I don't think there's actually PMIC-specific
init sequences, there's board specific tuning, but that's a story for
another day).
Fixes: 99a517a582 ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250617-eusb2-repeater-tuning-v2-2-ed6c484f18ee@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b1589b62 ]
This was fixed and re-introduced. 'type' is an enum, thus cast of
pointer on 64-bit compile test with W=1 causes:
mmp_tdma.c:644:9: error: cast to smaller integer type 'enum mmp_tdma_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Fixes: a67ba97dfb ("dmaengine: Use device_get_match_data()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250525-dma-fixes-v1-5-89d06dac9bcb@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3507c56cb ]
In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize
the pinctrl_map array, the function returns -ENOMEM directly
without freeing the previously allocated *map buffer. This results
in a memory leak of the original kmalloc_array allocation.
Fixes: e11dee2e98 ("pinctrl: sunxi: Deal with configless pins")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Link: https://lore.kernel.org/20250620012708.16709-1-chenyuan_fl@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ea488cce7 ]
According the function documentation of epf_ntb_init_epc_bar(), the
function should return an error code on error. However, it returns -1 when
no BAR is available i.e., when pci_epc_get_next_free_bar() fails.
Return -ENOENT instead.
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: changed err code to -ENOENT]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-1-fc685a22ad28@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5fa96dc55 ]
I get a very rare -Wstringop-overread warning with gcc-15 for one function
in aesbs_ctr_encrypt():
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:212:1446: error: '__builtin_memcpy' offset [17, 2147483647] is out of the bounds [0, 16] of object 'buf' with type 'u8[16]' {aka 'unsigned char[16]'} [-Werror=array-bounds=]
212 | src = dst = memcpy(buf + sizeof(buf) - bytes,
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:218:17: error: 'aesbs_ctr_encrypt' reading 1 byte from a region of size 0 [-Werror=stringop-overread]
218 | aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 2 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 3 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 6 of type 'u8[0]' {aka 'unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:36:17: note: in a call to function 'aesbs_ctr_encrypt'
36 | asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
This could happen in theory if walk.nbytes is larger than INT_MAX and gets
converted to a negative local variable.
Keep the type unsigned like the orignal nbytes to be sure there is no
integer overflow.
Fixes: c8bf850e99 ("crypto: arm/aes-neonbs-ctr - deal with non-multiples of AES block size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2937f5d2e2 ]
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c9 ("charger: max14577: Configure battery-dependent settings from DTS and sysfs")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9fa3aae08 ]
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check.
Fixes: eab4e6d953 ("power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250519024741.5846-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b0abc443a ]
If registration of pll_post is failed, it will be set to NULL or ERR,
unregistering same will fail with following call trace:
Unable to handle kernel NULL pointer dereference at virtual address 008
pc : clk_hw_unregister+0xc/0x20
lr : clk_hw_unregister_fixed_factor+0x18/0x30
sp : ffff800011923850
...
Call trace:
clk_hw_unregister+0xc/0x20
clk_hw_unregister_fixed_factor+0x18/0x30
xvcu_unregister_clock_provider+0xcc/0xf4 [xlnx_vcu]
xvcu_probe+0x2bc/0x53c [xlnx_vcu]
Fixes: 4472e1849d ("soc: xilinx: vcu: make pll post divider explicit")
Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Link: https://lore.kernel.org/r/20250210113614.4149050-2-rohit.visavalia@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 803b9eabc6 ]
The `separate_colour_plane_flag` element is only present in the SPS if
`chroma_format_idc == 3`, so the corresponding flag should be disabled
whenever that is not the case and not just on profiles where
`chroma_format_idc` is not present.
Fixes: b32e48503d ("media: controls: Validate H264 stateless controls")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13de464f44 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
davinci_lpsc_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensuring
no resources are left allocated.
Fixes: c6ed4d734b ("clk: davinci: New driver for davinci PSC clocks")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://lore.kernel.org/r/20250401131341.26800-1-bsdhenrymartin@gmail.com
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9358bdb9f9 ]
The expression '1 << EraseUnitSize' is evaluated in int, which causes
a negative result when shifting by 31 - the upper bound of the valid
range [10, 31], enforced by scan_header(). This leads to incorrect
extension when storing the result in 'erase->len' (uint64_t), producing
a large unexpected value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 254923ca87 ]
Change the logic in the restore function to properly handle bank
exceptions.
The check for exceptions in the saved state should be performed before
conducting any other ringstat register checks.
If a bank was saved with an exception, the ringstat will have the
appropriate rp_halt/rp_exception bits set, causing the driver to exit
the restore process with an error. Instead, the restore routine should
first check the ringexpstat register, and if any exception was raised,
it should stop further checks and return without any error. In other
words, if a ring pair is in an exception state at the source, it should
be restored the same way at the destination but without raising an error.
Even though this approach might lead to losing the exception state
during migration, the driver will log the exception from the saved state
during the restore process.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Fixes: bbfdde7d19 ("crypto: qat - add bank save and restore flows")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53669ff591 ]
The commit ca88a2bdd4 ("crypto: qat - allow disabling SR-IOV VFs")
introduced an unnecessary change that prevented enabling SR-IOV when
IOMMU is disabled. In certain scenarios, it is desirable to enable
SR-IOV even in the absence of IOMMU. Thus, restoring the previous
functionality to allow VFs to be enumerated in the absence of IOMMU.
Fixes: ca88a2bdd4 ("crypto: qat - allow disabling SR-IOV VFs")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 442134ab30 ]
If an error occurs during queueing the engine load will never be
decremented. Fix this by moving the engine load adjustment into
the cleanup function.
Fixes: bf8f91e711 ("crypto: marvell - Add load balancing between engines")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cc871ad01 ]
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
qat_free_dc_data+0x4f/0x60 [intel_qat]
qat_compression_event_handler+0x3d/0x1d0 [intel_qat]
adf_dev_shutdown+0x6d/0x1a0 [intel_qat]
adf_dev_down+0x32/0x50 [intel_qat]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6cd3cfb5a ]
In sun8i_ce_cipher_unprepare(), dma_unmap_sg() is incorrectly called with
the number of entries returned by dma_map_sg(), rather than using the
original number of entries passed when mapping the scatterlist.
To fix this, stash the original number of entries passed to dma_map_sg()
in the request context.
Fixes: 0605fa0f78 ("crypto: sun8i-ce - split into prepare/run/unprepare")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 715676d841 ]
Commit bc4d25fdfa ("clk: renesas: rzv2h: Add support for dynamic
switching divider clocks") missed setting the `CLK_SET_RATE_PARENT`
flag when registering ddiv clocks.
Without this flag, rate changes to the divider clock do not propagate
to its parent, potentially resulting in incorrect clock configurations.
Fix this by setting `CLK_SET_RATE_PARENT` in the clock init data.
Fixes: bc4d25fdfa ("clk: renesas: rzv2h: Add support for dynamic switching divider clocks")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250609140341.235919-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94fd44648d ]
When FORTIFY_SOURCE reports about a run-time buffer overread, the wrong
buffer size was being shown in the error message. (The bounds checking
was correct.)
Fixes: 3d965b33e4 ("fortify: Improve buffer overflow reporting")
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20250729231817.work.023-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee4cf79820 ]
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack.
Reported-by: zepta <z3ptaa@gmail.com>
Closes: https://lore.kernel.org/all/CAPBS6KoQyM7FMdPwOuXteXsOe44X4H3F8Fw+y_qWq6E+OdmxQA@mail.gmail.com
Fixes: 38d4f74bc1 ("media: atomisp_gmin_platform: stop abusing efivar API")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250724080756.work.741-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b114fcee76 ]
In the ARM64 BPF JIT when prog->aux->exception_boundary is set for a BPF
program, find_used_callee_regs() is not called because for a program
acting as exception boundary, all callee saved registers are saved.
find_used_callee_regs() sets `ctx->fp_used = true;` when it sees FP
being used in any of the instructions.
For programs acting as exception boundary, ctx->fp_used remains false
even if frame pointer is used by the program and therefore, FP is not
set-up for such programs in the prologue. This can cause the kernel to
crash due to a pagefault.
Fix it by setting ctx->fp_used = true for exception boundary programs as
fp is always saved in such programs.
Fixes: 5d4fa9ec56 ("bpf, arm64: Avoid blindly saving/restoring all callee-saved registers")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/bpf/20250722133410.54161-2-puranjay@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b03164eee ]
The usermode driver framework is not used anymore by the BPF
preload code.
Fixes: cb80ddc671 ("bpf: Convert bpf_preload.ko to use light skeleton.")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20250721-remove-usermode-driver-v1-1-0d0083334382@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8d8ce1b51 ]
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop.
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250725140725.3626540-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
