On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add the new QCM6490 compatible to support the reset functionality for
Low Power Audio subsystem.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-1-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
During the GDSC FSM state, the GDSC hardware waits for an ACK from the
respective subsystem core. In some scenarios, this ACK can be delayed.
To handle such delays, increase the GDSC status poll timeout from 1500us
to 2000us as per the design recommendation.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-2-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@vger.kernel.org
Fixes: 173722995c ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Fixes: c58225b7e3 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250305-topic-sm8650-upstream-fix-usb-suspend-v1-1-649036ab0557@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-4-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-3-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-2-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-1-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm x1e80100-camcc was moved to its own dt bindings description
file, however a small leftover was left, remove it.
Fixes: 7ec95ff9ab ("dt-bindings: clock: move qcom,x1e80100-camcc to its own file")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20250303223936.1780441-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 Video clock controller is a derivative of SA8775P, but has a
minor difference. Hence add support for QCS8300 Video clock controller by
extending the SA8775P VideoCC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-6-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 GPU clock controller is a derivative of SA8775P, but has few
additional clocks and minor differences. Hence, add support for QCS8300
GPU clock controller, by extending the SA8775P GPUCC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-2-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 video clock controller is a derivative of SA8775P, but
QCS8300 has minor difference. Hence, reuse the SA8775P videocc bindings
for QCS8300 platform.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-5-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 camera clock controller is a derivative of SA8775P, but has
an additional clock and minor differences. Hence, reuse the SA8775P
camera bindings and add additional clock required for QCS8300.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-3-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 GPU clock controller is a derivative of SA8775P, but has few
additional clocks and minor differences. Hence, reuse gpucc bindings of
SA8775P and add additional clocks required for QCS8300.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-1-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are some ipq5018 based device's firmware only can able to boot
arm32 but the clock driver dont allow it to be compiled on arm32.
Therefore allow GCC for IPQ5018 to be selected when building ARM32
kernel
Signed-off-by: Karl Chan <exxxxkc@getgoogleoff.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007163414.32458-4-exxxxkc@getgoogleoff.me
[bjorn: Updated commit message, per Dmitry's suggestion]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The UART’s software and hardware flow control are currently not
functioning correctly.
For software flow control, the following error is encountered:
qcom_geni_serial 1a80000.serial: Couldn't find suitable
clock rate for 56000000, 3500000, 2500000, 1152000, 921600, 19200
During hardware flow control testing, a “Retry 0: Got ZCAN error” is
observed.
To address these issues, update the UART frequency table to include all
supported frequencies according to the frequency plan.
Fixes: 21b5d5a4a3 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250124060914.1564681-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
BRANCH_HALT_ENABLE and BRANCH_HALT_ENABLE_VOTED flags are used to check
halt status of branch clocks, which have an inverted logic for the halt
bit in CBCR register. However, the current logic in the _check_halt()
method only compares the BRANCH_HALT_ENABLE flags, ignoring the votable
branch clocks.
Update the logic to correctly handle the invert logic for votable clocks
using the BRANCH_HALT_ENABLE_VOTED flags.
Fixes: 9092d1083a ("clk: qcom: branch: Extend the invert logic for branch2 clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250128-push_fix-v1-1-fafec6747881@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This will allow linux to properly reset eMMC/SD blocks.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203063427.358327-3-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SDM429 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3 and
IPA_CLK and additionally has the BB_CLK3.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250212-sdm429-rpm-v1-2-0a24ac19a478@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reading few registers at the end of the block (e.g. 0x10000, 0x10004)
results in synchronous external abort, so limit the regmap to the last
readable register which allows dumping the regs for debugging.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212163243.237658-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Include mod_devicetable.h for the 'struct of_device_id' and
clk-provider.h for the 'struct clk_hw'.
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-3-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drivers should include only headers they use so drop:
1. of.h and of_address.h: When no OF call is used (of_device_id is
coming from mod_devicetable.h).
2. clk.h, property.h and reset-controller.h: No calls to clock consumer
or reset framework, no fwnode/property calls.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-2-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If regmap_read() fails, random stack value was used in calculating new
frequency in recalc_rate() callbacks. Such failure is really not
expected as these are all MMIO reads, however code should be here
correct and bail out. This also avoids possible warning on
uninitialized value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-1-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a clock-controller lists multiple power-domains we need make each GDSC a
subdomain of each of the clock-controller's listed power-domains.
GDSCs without an explicitly defined parent should be a subdomain of each of
the clock-controller's listed power-domains.
GDSCs with an explicitly defined parent should attach only to the parent
GDSC and not the listed power-domains. Any votes will trickle through the
hierarchy up to the external power-domains.
========================================
:: arch/arm64/boot/dts/example.dtsi ::
========================================
clockcc: clock-controller@0 {
compat ="qcom,example-clockcc";
power-domains = <&pd_a, &pd_b>;
}
========================================
:: drivers/clk/qcom/example-clockcc.c ::
========================================
static struct gdsc parent_gdsc = {
.pd = {
.name = "parent_gdsc",
},
};
static struct gdsc child0_gdsc = {
.pd = {
.name = "child0_gdsc",
},
.parent = &parent_gdsc.pd,
};
static struct gdsc child1_gdsc = {
.pd = {
.name = "child1_gdsc",
},
.parent = &parent_gdsc.pd,
};
========================================
:: power-subdomains ::
========================================
pm-domain::pd_a
└── pm-subdomain::clockcc::parent_gdsc
├── pm-subdomain::clockcc::child0_gdsc
└── pm-subdomain::clockcc::child1_gdsc
pm-domain::pd_b
└── pm-subdomain::clockcc::parent_gdsc
├── pm-subdomain::clockcc::child1_gdsc
└── pm-subdomain::clockcc::child2_gdsc
The performance states will percolate through the pm-domain hierarchy to
the domains that handle the relevant states.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-4-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Right now we support one power-domain per clock controller.
These single power-domains are switched on by the driver platform logic.
However when we have multiple power-domains attached to a clock-controller
that list of power-domains must be handled outside of driver platform
logic.
Use devm_pm_domain_attach_list() to automatically hook the list of given
power-domains in the dtsi for the clock-controller driver.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-3-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Adding a new clause to this if/else I noticed the existing usage of
pm_genpd_add_subdomain() wasn't capturing and returning the result code.
pm_genpd_add_subdomain() returns an int and can fail. Capture that result
code and throw it up the call stack if something goes wrong.
Fixes: 1b771839de ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-2-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update some RCGs on the sm8250 camera clock controller to use
clk_rcg2_shared_ops. The shared_ops ensure the RCGs get parked
to the XO during clock disable to prevent the clocks from locking up
when the GDSC is enabled. These mirror similar fixes for other controllers
such as commit e5c359f70e ("clk: qcom: camcc: Update the clock ops for
the SC7180").
Signed-off-by: Jordan Crouse <jorcrous@amazon.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250122222612.32351-1-jorcrous@amazon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GPU clock is required for CPU access to GPUSS registers. It was
previously decided (on this and many more platforms) that the added
overhead/hassle introduced by keeping track of it would not bring much
measurable improvement in the power department.
The display clock is basically the same story over again.
Now, we're past that discussion and this commit is not trying to change
that. Instead, the clocks are both force-enabled in .probe *and*
registered with the common clock framework, resulting in them being
toggled off after ignore_unused.
Unregister said clocks to fix breakage when clk_ignore_unused is absent
(as it should be).
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-1-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
-----BEGIN PGP SIGNATURE-----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=mWV6
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
- sh: boards: Use imply to enable hardware with complex dependencies
- sh: Migrate to the generic rule for built-in DTB
- sh: irq: Use seq_put_decimal_ull_width() for decimal values
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmefPVYACgkQdCY7N/W1
+ROC5A//cG3N/oT8RhKtGNQyeuEBpxswHY0itbQ7G7N6DPXMcryu2jjg+ipVLobC
6+fEsSQZt8AhsGOWsaem3adNsqPh362RhhgrMStmree8wMXyEDFUOGn4QtW0GHHA
Y/UODeJxjwgAIBLuQ5ckn6c1+k0iVc51zeBvtQkQI86h2TT4IYehB8e605EFsman
h6PvinS+n7cyEtYQrszUFH3VpYX1Q4xPKQREhmzVIyRNQonfwEZNAbgJUxs3JsV8
BJqxJoCST7DNdiq6969DaFGuGcIldQcuARDxEAv1NZwymudVsEJWjpyfR23SyIbe
ztsB4NHkxGwHml51dVLliLHCnY2ARdoo2Ohq6wpa7OdwOKA42FdSSgrVYEjMHRCT
PlEuPMnNxNXcckUG6hW5G5GoxY7LOCrcOeJrpoNDmQsNHq88+N3Y5Vj5YTuGUwun
826r5ilxQHGwBlhZW6kbAvaTGdLCs9bSwS1Sc4yojlBUxSM1Bgtuv0iBY7zNIfiX
9f7zb7Xde5XGMpMoRtL8A3FzMFKDaMTuLSXbNL7KCkQJvsb9Q45zOd5G+eawcBMr
0bJDRFo6MUmQfXXkGtZLK8zqixOnrL3JQaBNtQhiB8QDueyaaXtJza5TPFeNE25j
/8VldUlv/bQyymOvuOHoEEG3kQBQGc7Iwb9dBtbZiLLRpgdxNY8=
=G6GL
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5yJdgAKCRBZ7Krx/gZQ
69W4AQDwgxceiQ6icx3rFhCWQigne4jdMO84kd8tNaa+xHGe1AD/WnkeChc5DqjQ
wZWZxAAzml9SS01IcSiHWaF5fgrjlA0=
=rXOq
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
-----BEGIN PGP SIGNATURE-----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=/P+2
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
Here is a single debugfs fix from Al to resolve the reported regression
in linux-next and in the driver-core tree. It has been reported to fix
the issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ55HfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykocACgqvoq+99sC6joNEqAuZZil/PU/1wAoNJtys1x
3JTFgphXSjoyMBsmM96b
=pRKD
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
13 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ54MEgAKCRDdBJ7gKXxA
jlhdAP0evTQ9JX+22DDWSVdWFBbnQ74c5ddFXVQc1LO2G2FhFgD+OXhH8E65Nez5
qGWjb4xgjoQTHS7AL4pYEFYqx/cpbAQ=
=rN+l
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
-----BEGIN PGP SIGNATURE-----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=49gN
-----END PGP SIGNATURE-----
Merge tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
MM developers have an interest in the xarray code.
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Revert c7bb5cf9fc ("xarray: port tests to kunit"). It broke the build
when compiing the xarray userspace test harness code.
Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update .mailmap to reflect my new (and final) primary email address,
carlos.bilbao@kernel.org. Also update contact information in files
Documentation/translations/sp_SP/index.rst and MAINTAINERS.
Link: https://lkml.kernel.org/r/20250130012248.1196208-1-carlos.bilbao@kernel.org
Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Carlos Bilbao <bilbao@vt.edu>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
e.g. qemu cmdline
========================
numa_cmd="-numa node,nodeid=1,memdev=mem1,cpus=2-3 -numa node,nodeid=0,cpus=0-1 -numa dist,src=0,dst=1,val=20"
mem_cmd="-object memory-backend-ram,id=mem1,size=16G"
w/o this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
==========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 0 kB
with this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
===========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 2
HugePages_Free: 2
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 2097152 kB
Link: https://lkml.kernel.org/r/f8d8dad3a5471d284f54185f65d575a6aaab692b.1736592534.git.ritesh.list@gmail.com
Fixes: b78b27d029 ("hugetlb: parallelize 1G hugetlb initialization")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Pavithra Prakash <pavrampu@linux.ibm.com>
Suggested-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Gang Li <gang.li@linux.dev>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
