Register the MT7902 PCI device ID in the mt7921 driver and add its
corresponding firmware and ROM patch names.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-10-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Configure the RX/TX ring prefetch setting for MT7902 PCIe device.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-9-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add MCU support for the MT7902 chipset.
runtime pm is not yet supported by the driver, but normal mac80211
operation is unaffected.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-8-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Restart the MCU and poll FW state to ensure correct MCU status
before downloading the ROM patch.
This is a prerequisite for enabling MT7902 PCIe and has been
validated on MT7921 and MT7925 since they share the common code path.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-7-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a dummy register read in mt76_connac_mcu_rate_txpower_band() to act as
a PSE barrier. This would release PSE pages and prevents buffer underflow
issues when handling MCU commands with larger payloads without the response
in mt76_connac_mcu_set_rate_txpower().
This is a prerequisite patch before enabling MT7902 PCIe and SDIO support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-6-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add MT7902 to is_mt76_fw_txp() so it follows the legacy TX descriptor
path like the other connac2 chips that return false.
This is a prerequisite patch before enabling MT7902 pcie support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-5-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add MT7902 PCIe specific DMA layout overrides for MCU TXQ index, RX ring
size, and MCU_WA usage. Common layout remains the default for other chips.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-4-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7902 PCIe requires a different wm2_complete_mask value, so introduce a
mutable per-device copy of the default irq_map and override the field
only for this chip. Other devices continue using the shared const
template.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Replace explicit napi_disable() calls for RX queues with
mt76_for_each_q_rx() in mt7921e_mac_reset().
This removes hardcoded queue indices and disables all configured
RX queues during reset.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Unify all per-chip conditionals under the new is_connac2() helper. This
avoids confusion caused by the previous is_mt7921() check, which
implicitly covered multiple connac2 chipsets and no longer reflected its
actual scope. This is a clean-up only change with no functional impact.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before sending the current EEPROM data to the firmware, read the
calibration-free data (FT data) from the efuse and merge it with
the existing EEPROM data.
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20260212090310.3335392-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce VAR_TYPE_24 for the MT7992 chipsets, a dual-band variant
supporting 3T3R/2SS on the 2 GHz band and 5T5R/4SS on the 5GHz band.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20260212090310.3335392-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For the MT7992 and MT7990 chipsets, efuse mode is not supported because
there is insufficient space in the efuse to store the calibration data.
Therefore, an additional on-chip EEPROM is added to address this
limitation.
Co-developed-by: Elwin Huang <s09289728096@gmail.com>
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20260212090310.3335392-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The maximum power value may exist in either the data or backoff field.
Previously, backoff power limits were not considered in txpower reporting.
This patch ensures mt76 also considers backoff values in the SKU table.
Also, each RU entry (RU26, RU52, RU106, BW20, ...) in the DTS corresponds
to 10 stream combinations (1T1ss, 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss,
4T2ss, 3T3ss, 4T3ss, 4T4ss).
For beamforming tables:
- In connac2, beamforming entries for BW20~BW160, and OFDM do not include
1T1ss.
- In connac3, beamforming entries for BW20~BW160, and RU include 1T1ss,
but OFDM beamforming does not include 1T1ss.
Non-beamforming and RU entries for both connac2 and connac3 include 1T1ss.
Fixes: b05ab4be9f ("wifi: mt76: mt7915: add bf backoff limit table support")
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/8fa8ec500b3d4de7b1966c6887f1dfbe5c46a54c.1771205424.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.
Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue.
Fixes: a8f424c128 ("wifi: mt76: add multi-radio remain_on_channel functions")
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/ace737e7b621af7c2adb33b0188011a5c1de2166.1765204256.git.chad@monroe.io
Signed-off-by: Felix Fietkau <nbd@nbd.name>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 352d966126 ("wifi: mt76: mt7921: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260126180013.8167-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7921_set_roc API may be executed concurrently with mt7921_roc_work,
specifically between the following code paths:
- The check and clear of MT76_STATE_ROC in mt7921_roc_work:
if (!test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state))
return;
- The execution of ieee80211_iterate_active_interfaces.
This race condition can interrupt the ROC abort flow, resulting in
the ROC process failing to abort as expected.
To address this defect, the modification of MT76_STATE_ROC is now
protected by mt792x_mutex_acquire(phy->dev). This ensures that
changes to the ROC state are properly synchronized, preventing
race conditions and ensuring the ROC abort flow is not interrupted.
Fixes: 034ae28b56 ("wifi: mt76: mt7921: introduce remain_on_channel support")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/2568ece8b557e5dda79391414c834ef3233049b6.1769133724.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After the chip reset, the procedure to set the tx power will not be
successful because the previous region setting is still remains.
Clear the region setting during MAC initialization and allow it to be
reset to finalize the TX power setting.
Fixes: 3bc62aa448 ("wifi: mt76: mt7925: add auto regdomain switch support")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Link: https://patch.msgid.link/20260120163152.3694116-1-leon.yen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: d1369e515e ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Fixes: 6683d98808 ("mt76: connac: move mt76_connac_mcu_add_key in connac module")
Fixes: 4f831d18d1 ("wifi: mt76: mt7915: enable WED RX support")
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260116144919.1482558-1-zilin@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 45064d19fd ("wifi: mt76: mt7925: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20251216013849.17976-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
We are experiencing command timeouts because an upper layer triggers
an unexpected scan while the system/device is in suspend.
The upper layer should not initiate scans until the NIC has fully resumed.
We want to prevent scans during suspend and avoid timeouts without harming
power management or user experience.
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Link: https://patch.msgid.link/20260112114007.2115873-1-leon.yen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
IEEE80211_CHANCTX_CHANGE_PUNCTURING is a channel context change
flag and should not be checked in the BSS change handler, where
the changed mask represents enum ieee80211_bss_change.
Remove the puncturing handling from the BSS path and rely on
mt7925_change_chanctx() to update puncturing configuration.
Fixes: cadebdad95 ("wifi: mt76: mt7925: add EHT preamble puncturing")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20251216022017.23870-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In order to not always reallocate them during NPU reset, store the DMA
mapped buffer addresses allocated by mt7996_npu_hw_init routine in
mt7996 structure.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-16-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not run reset_q callaback with reset_idx set to true for NPU Tx
queues. This is a preliminary patch to properly manage reset procedure
when NPU offloading is enabled.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-14-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to properly enable NPU offloading for MT7996
chipset since NPU initialization must be completed before kicking rx
queues.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-13-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce __mt7996_npu_hw_init utility routine in order to run it
holding mt76 mutex and move NPU hw re-initialization before restarting
the NAPIs during device reset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-12-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in MT7996 dma codebase for MT7990 chipset.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-11-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in MT7996 init codebase for MT7990 chipset.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-10-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in RRO 3.0 session management.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-9-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt7992_npu_txrx_offload_init utility routine.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-6-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix BAND2 tx queues initialization for MT7990 chipset when NPU is
enabled. This is a preliminary patch to enable NPU offload for MT7996
(Eagle) chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-4-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7990 NPU binary requires to initialize NPU desc_base after configuring
ring_size. This is a preliminary patch to enable NPU offload for MT7996
(Eagle) chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-3-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move mt7996_npu_hw_stop routine before disabling rx NAPIs in order to
fix NPU stop procedure used during device L1 SER recovery.
Add missing usleep_range in mt7996_npu_hw_stop().
Fixes: 377aa17d2a ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-1-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues.
Fixes: 950d0abb5c ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251208-mt76-fix-memory-leak-v1-1-cba813fc62b8@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure.
Cc: stable@vger.kernel.org
Fixes: fa6ad88e02 ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251009020158.1923429-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior.
Fixes: 5c14a5f944 ("mt76: mt7921: introduce mt7921e support")
Signed-off-by: Rory Little <rory@candelatech.com>
Link: https://patch.msgid.link/20250904000711.3033860-1-rory@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7996 driver currently checks the MT_RXD3_NORMAL_FCS_ERR bit in
rxd1 whereas other Connac3-based drivers(mt7925) correctly check this
bit in rxd3.
Since the MT_RXD3_NORMAL_FCS_ERR bit is defined in the fourth RX
descriptor word (rxd3), update mt7996 to use the proper descriptor
field. This change aligns mt7996 with mt7925 and the rest of the
Connac3 family.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251013090826.753992-1-alok.a.tiwari@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized.
Fixes: ebb1406813 ("wifi: mt76: mt7925: add link handling to txwi")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250904030649.655436-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move the NULL check for 'sta' before dereferencing it to prevent a
possible crash.
Fixes: 44eb173bdd ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250904030649.655436-4-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_wcid_cleanup() was not removing wcid entries from sta_poll_list
before mt76_reset_device() reinitializes the master list. This leaves
stale pointers in wcid->poll_list, causing list corruption when
mt76_wcid_add_poll() later checks list_empty() and tries to add the
entry back.
The fix adds proper cleanup of poll_list in mt76_wcid_cleanup(),
matching how tx_list is already handled. This is similar to what
mt7996_mac_sta_deinit_link() already does correctly.
Fixes list corruption warnings like:
list_add corruption. prev->next should be next (ffffffff...)
Signed-off-by: Zac Bowling <zac@zacbowling.com>
Link: https://patch.msgid.link/20260120201043.38225-3-zac@zacbowling.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
