In order to not always reallocate them during NPU reset, store the DMA
mapped buffer addresses allocated by mt7996_npu_hw_init routine in
mt7996 structure.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-16-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not run reset_q callaback with reset_idx set to true for NPU Tx
queues. This is a preliminary patch to properly manage reset procedure
when NPU offloading is enabled.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-14-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to properly enable NPU offloading for MT7996
chipset since NPU initialization must be completed before kicking rx
queues.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-13-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce __mt7996_npu_hw_init utility routine in order to run it
holding mt76 mutex and move NPU hw re-initialization before restarting
the NAPIs during device reset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-12-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in MT7996 dma codebase for MT7990 chipset.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-11-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in MT7996 init codebase for MT7990 chipset.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-10-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add NPU integration in RRO 3.0 session management.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-9-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt7992_npu_txrx_offload_init utility routine.
This is a preliminary patch to enable NPU offload for MT7996 (Eagle)
chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-6-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix BAND2 tx queues initialization for MT7990 chipset when NPU is
enabled. This is a preliminary patch to enable NPU offload for MT7996
(Eagle) chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-4-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7990 NPU binary requires to initialize NPU desc_base after configuring
ring_size. This is a preliminary patch to enable NPU offload for MT7996
(Eagle) chipset.
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-3-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move mt7996_npu_hw_stop routine before disabling rx NAPIs in order to
fix NPU stop procedure used during device L1 SER recovery.
Add missing usleep_range in mt7996_npu_hw_stop().
Fixes: 377aa17d2a ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Tested-by: Kang Yang <kang.yang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260122-mt76-npu-eagle-offload-v2-1-2374614c0de6@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues.
Fixes: 950d0abb5c ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251208-mt76-fix-memory-leak-v1-1-cba813fc62b8@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure.
Cc: stable@vger.kernel.org
Fixes: fa6ad88e02 ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251009020158.1923429-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior.
Fixes: 5c14a5f944 ("mt76: mt7921: introduce mt7921e support")
Signed-off-by: Rory Little <rory@candelatech.com>
Link: https://patch.msgid.link/20250904000711.3033860-1-rory@candelatech.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7996 driver currently checks the MT_RXD3_NORMAL_FCS_ERR bit in
rxd1 whereas other Connac3-based drivers(mt7925) correctly check this
bit in rxd3.
Since the MT_RXD3_NORMAL_FCS_ERR bit is defined in the fourth RX
descriptor word (rxd3), update mt7996 to use the proper descriptor
field. This change aligns mt7996 with mt7925 and the rest of the
Connac3 family.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251013090826.753992-1-alok.a.tiwari@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized.
Fixes: ebb1406813 ("wifi: mt76: mt7925: add link handling to txwi")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250904030649.655436-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move the NULL check for 'sta' before dereferencing it to prevent a
possible crash.
Fixes: 44eb173bdd ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250904030649.655436-4-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_wcid_cleanup() was not removing wcid entries from sta_poll_list
before mt76_reset_device() reinitializes the master list. This leaves
stale pointers in wcid->poll_list, causing list corruption when
mt76_wcid_add_poll() later checks list_empty() and tries to add the
entry back.
The fix adds proper cleanup of poll_list in mt76_wcid_cleanup(),
matching how tx_list is already handled. This is similar to what
mt7996_mac_sta_deinit_link() already does correctly.
Fixes list corruption warnings like:
list_add corruption. prev->next should be next (ffffffff...)
Signed-off-by: Zac Bowling <zac@zacbowling.com>
Link: https://patch.msgid.link/20260120201043.38225-3-zac@zacbowling.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch adds support for handling BSS_CHANGED_ERP_CTS_PROT and
BSS_CHANGED_HT.
With this change, when the Wi-Fi driver needs to adjust its behavior for
compatibility or performance, especially concerning older 11g/n devices,
by enabling or disabling CTS protection frames, often for hidden SSIDs or
to manage legacy clients.
It also introduces debugfs options to manually control protection mode,
allowing users to select betweenno protection, RTS/CTS, and CTS-to-self.
Reviewed-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/942ddb5777d5c201930d6609e9ba877a6ba6714a.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
With this fix, when driver needs to adjust its behavior for compatibility,
especially concerning older 11g/n devices, by enabling or disabling CTS
protection frames, often for hidden SSIDs or to manage legacy clients.
Fixes: 150b91419d ("wifi: mt76: mt7915: enable use_cts_prot support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/eb8db4d0bf1c89b7486e89facb788ae3e510dd8b.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Driver should not directly write WTBL to prevent overwritten issues.
With this fix, when driver needs to adjust its behavior for compatibility,
especially concerning older 11g/n devices, by enabling or disabling CTS
protection frames, often for hidden SSIDs or to manage legacy clients.
Fixes: e34235ccc5 ("wifi: mt76: mt7615: enable use_cts_prot support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/edb87088b0111b32fafc6c4179f54a5286dd37d8.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The linux-firmware repo moved mt7601u.bin from its root folder to
the mediatek sub-folder some time ago, but the driver still tries
to load firmware from the old location. Users might have firmware
in either location so update the driver to check both.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20251227112219.2768439-1-christianshewitt@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A deadlock may occur between two works, ps_work and mac_work, if their work
functions run simultaneously as they attempt to cancel each other by
calling cancel_delayed_work_sync().
mt792x_mac_work() -> ... -> cancel_delayed_work_sync(&pm->ps_work);
mt792x_pm_power_save_work() -> cancel_delayed_work_sync(&mphy->mac_work);
In high-load situations, they are queued but may not have chance to be
executed until the CPUs are released. Once the CPUs are available, there
is a high possibility that the ps_work function and mac_work function will
be executed simultaneously, resulting in a possible deadlock.
This patch replaces cancel_delayed_work_sync() with cancel_delayed_work()
in ps_work to eliminate the deadlock and make the code easier to maintain.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20251215122231.3180648-1-leon.yen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The selection of MLO mode should depend on the capabilities of the STA
rather than those of the peer AP to avoid compatibility issues with
certain APs, such as Xiaomi BE5000 WiFi7 router.
Fixes: 69acd6d910 ("wifi: mt76: mt7925: add mt7925_change_vif_links")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Link: https://patch.msgid.link/20251211123836.4169436-1-leon.yen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reset ampdu_state if ieee80211_start_tx_ba_session() fails in
mt76_connac2_tx_check_aggr(), otherwise the driver may incorrectly
assume aggregation is active and skip future BA setup attempts.
Fixes: 163f4d22c1 ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20251216005930.9412-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reset the ampdu_state configured state if ieee80211_start_tx_ba_session
routine fails in mt7996_tx_check_aggr()
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251214-mt7996-aggr-check-fix-v1-1-33a8b62ec0fc@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine.
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251205-mt76-txq-wicd-fix-v2-4-f19ba48af7c1@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Switch to the secondary link if available in mt7996_mac_sta_remove_links
routine if the primary one is removed.
Moreover reset secondary link index for single link scenario.
Fixes: 85cd5534a3 ("wifi: mt76: mt7996: use correct link_id when filling TXD and TXP")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251205-mt76-txq-wicd-fix-v2-3-f19ba48af7c1@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reset WCID index in mt76_txq struct if primary link is removed in
mt7996_vif_link_remove routine.
Fixes: a3316d2fc6 ("wifi: mt76: mt7996: set vif default link_id adding/removing vif links")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251205-mt76-txq-wicd-fix-v2-2-f19ba48af7c1@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add CSA (Channel Switch Announcement) related implementation
in collaboration with mac80211 to deal with dynamic channel
switching.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250926053447.4036650-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The shared reset procedure of MT7610 and MT7612 stop all queues before
starting the reset sequence.
They however never restart these like other supported mt76 chips
do in the reconfig_complete call. This leads to TX not continuing
after the reset.
Restart queues in the reconfig_complete callback to restore
functionality after the reset.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20251129023904.288484-1-mail@david-bauer.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Previously, the AMPDU state bit for a given TID was set before attempting
to start a BA session, which could result in the AMPDU state being marked
active even if ieee80211_start_tx_ba_session() failed. This patch changes
the logic to only set the AMPDU state bit after successfully starting a BA
session, ensuring proper synchronization between AMPDU state and BA session
status.
This fixes potential issues with aggregation state tracking and improves
compatibility with mac80211 BA session management.
Fixes: 44eb173bdd ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/d5960fbced0beaf33c30203f7f8fb91d0899c87b.1764228973.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7992 and MT7990 support up to 19 interfaces per band and 32 in total.
Fixes: 8df63a4bbe ("wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251215063728.3013365-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since some radar specifications maintained by the driver are incorrect
and are now also maintained by the firmware, offload the initialization
procedure to the firmware.
This fixes issues for radar detection rate testings.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251215063728.3013365-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When CSA countdown is going to start, carry UNI_BSS_INFO_BCN_BCC tag to
abort any CCA countdown.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251215063728.3013365-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After channel switch, some tags of BSSINFO (rfch) and STAREC (bfer,
rate_ctrl) commands should also be updated. Otherwise, a BSS might not be
able to transmit with its peer using correct bandwidth.
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20251215063728.3013365-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
RDD_DET_MODE is a firmware command intended for testing and does not
pause TX after radar detection, so remove it from the normal flow;
instead, use the MAC_ENABLE_CTRL firmware command to resume TX after
the radar-triggered channel switch completes.
Fixes: 1529e335f9 ("wifi: mt76: mt7996: rework radar HWRDD idx")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20251215063728.3013365-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use correct link_id to report CSA and CCA countdown events, and also
modify mt7996_channel_switch_beacon() to set beacon with the correct
link_id.
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251215063728.3013365-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
-----BEGIN PGP SIGNATURE-----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=cLVw
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Aside from various small improvements/cleanups, not much:
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
* tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (31 commits)
qtnfmac: use alloc_netdev macro for single queue devices
wifi: libertas: don't kill URBs in interrupt context
wifi: libertas: use USB anchors for tracking in-flight URBs
wifi: nl80211: use int for band coming from netlink
wifi: rsi_91x_usb: do not pause rfkill polling when stopping mac80211
wifi: mac80211: fix STA link removal during link removal
wifi: nl80211: reject S1G/60G with HT chantype
wifi: ieee80211: fix definition of EHT-MCS 15 in MRU
wifi: cfg80211: check non-S1G width with S1G chandef
wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands
wifi: mac80211: don't use cfg80211_chandef_create() for default chandef
wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()
wifi: b43: use register definitions in nphy_op_software_rfkill
wifi: cfg80211: split control freq check from chandef check
wifi: mac80211: always use full chanctx compatible check
wifi: mac80211: refactor chandef tracing macros
wifi: mac80211: validate HE 6 GHz operation when EHT is used
wifi: nl80211: split out UHR operation information
wifi: mwifiex: drop redundant device reference
wifi: rt2x00: drop redundant device reference
...
====================
Link: https://patch.msgid.link/20260319082439.79875-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
The same problem for all foreignly added dsa vlans on the bridge.
First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20260317110347.363875-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQKU153ubb5unbkl6Gx/ZpNW1HNdwUCabkqjRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQsf2aTVtRzXdlaAEA4fQA41/tbgsciMSf7aqT
lEAbZF/6DnsFZiTmuUfqPvQA/3+R0uiJlUTB3NGhhXXXikP4Yj61lWMDjw//lvYJ
74IG
=elM6
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Included features:
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
* tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: consolidate crypto allocations in one chunk
selftests: ovpn: add test for the FW mark feature
selftests: ovpn: check asymmetric peer-id
ovpn: add support for asymmetric peer IDs
selftests: ovpn: add notification parsing and matching
ovpn: notify userspace on client float event
ovpn: pktid: use bitops.h API
ovpn: use correct array size to parse nested attributes in ovpn_nl_key_swap_doit
selftests: ovpn: allow compiling ovpn-cli.c with mbedtls3
====================
Link: https://patch.msgid.link/20260317104023.192548-1-antonio@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
