During several network incidents, a number of RTRS paths for a session
went through disconnect and reconnect phase. However, some of those did
not auto-reconnect successfully. Instead they failed with the following
logs,
On client,
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -104
kernel: rtrs_client L2698: <sess-name>: init_conns() failed: err=-104
path=gid:<gid1>@gid:<gid2> [mlx4_0:1]
On server, (log a)
kernel: ibtrs_server L1868: <>: Connection already exists: 0
When the misbehaving path was removed, and add_path was called to re-add
the path, the log on client side changed to, (log b)
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -17
There was no log on the server side for this, which is expected since
there is no logging in that path,
if (unlikely(__is_path_w_addr_exists(srv, &cm_id->route.addr))) {
err = -EEXIST;
goto err;
Because of the following check on server side,
if (unlikely(sess->state != IBTRS_SRV_CONNECTING)) {
ibtrs_err(s, "Session in wrong state: %s\n",
.. we know that the path in (log a) was in CONNECTING state.
The above state of the path persists for as long as we leave the session
be. This means that the path is in some zombie state, probably waiting
for the info_req packet to arrive, which never does.
The changes in this commits does 2 things.
1) Add logs at places where we see the errors happening. The logs would
shed more light at the state and lifetime of such zombie paths.
2) Close such zombie sessions, only if they are in CONNECTING state, and
after an inactivity period of 30 seconds.
i) The state check prevents closure of paths which are CONNECTED.
Also, from the above logs and code, we already know that the path could
only be on CONNECTING state, so we play safe and narrow our impact surface
area by closing only CONNECTING paths.
ii) The inactivity period is to allow requests for other cid to finish
processing, or for any stray packets to arrive/fail.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove unused members from rtrs_clt_io_req.
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The member variable status in the struct rdma_cm_event is used for both
linux errors and the errors definded in rdma stack.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Support IB_MR_TYPE_SG_GAPS, which has less limitations
than standard IB_MR_TYPE_MEM_REG, a few ULP support this.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-4-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Print error description instead of the error number.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-3-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This fixes the following error on the server side:
RTRS server session allocation failed: -EINVAL
caused by the caller of the `ib_dma_map_sg()`, which does not expect
less mapped entries, than requested, which is in the order of things
and can be easily reproduced on the machine with enabled IOMMU.
The fix is to treat any positive number of mapped sg entries as a
successful mapping and cache DMA addresses by traversing modified
SG table.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The dma_device field is marked as internal and must not be accessed by
drivers or ULPs. Remove all direct mlx5 references to this field.
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-4-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In mlx5_ib_stage_caps_init(), if mlx5_ib_init_ucaps() fails after
mlx5_ib_init_var_table() succeeds, the VAR bitmap is leaked since
the function returns without cleanup.
Thus, cleanup the var table bitmap in case of error of initializing
ucaps before exiting, preventing the leak above.
Fixes: cf7174e898 ("RDMA/mlx5: Create UCAP char devices for supported device capabilities")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-3-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some of the functions are local to the module and some are not used
starting from commit 36783dec8d ("RDMA/rxe: Delete deprecated module
parameters interface"). Delete and avoid exporting them.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-2-00367f77f3a8@nvidia.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ib_umem_dmabuf_get_with_dma_device() is an in-kernel function and does
not require a defensive check for the .move_notify callback. All current
callers guarantee that this callback is always present.
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-1-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Implement the query_port_speed callback for mlx5 driver to support
querying effective port bandwidth.
For LAG configurations, query the aggregated speed from the LAG layer
or from the modified vport max_tx_speed.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Raise IB_EVENT_DEVICE_SPEED_CHANGE whenever the speed of one of the
device's ports changes. Usually all ports of the device changes
together.
This ensures user applications and upper-layer software are immediately
notified when bandwidth changes, improving traffic management in dynamic
environments. This is especially useful for vports which are part of a
LAG configuration, to know if the effective speed of the LAG was
changed.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add new ibv_query_port_speed() verb to enable applications to query
the effective bandwidth of a port.
This verb is particularly useful when the speed is not a multiplication
of IB speed and width where width is 2^n.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update sysfs rate_show() to rely on ib_port_attr_to_speed_info() for
converting IB port speed and width attributes to data rate and speed
string.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce ib_port_attr_to_rate() to compute the data rate in 100 Mbps
units (deci-Gb/sec) from a port's active_speed and active_width
attributes. This generic helper removes duplicated speed-to-rate
calculations, which are used by sysfs and the upcoming new verb.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IB_EVENT_DEVICE_SPEED_CHANGE for notifying user applications on
device's ports speed changes.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW configurations. This limitation prevents userspace and
upper-layer software from obtaining accurate bandwidth information,
which impacts traffic scheduling decisions.
This series addresses this by:
1. Adding mlx5 internal logic to calculate and propagate the effective
aggregated LAG speed to all attached vports. The vport speeds are
dynamically updated when LAG member link states change.
2. Extending RDMA core with a new ib_query_port_speed() verb and an
IB_EVENT_DEVICE_SPEED_CHANGE async event. These interfaces expose
the effective port speed to userspace, supporting speeds that are
not expressible as IB speed * width (where width is 2^n).
This series enables userspace applications to query the effective
port speed and receive notifications on speed changes in real-time.
In LAG configurations, each mlx5 port reports the aggregated bandwidth
of all active LAG members.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add mlx5_lag_query_bond_speed() to query the aggregated speed of
lag configurations with a bond device.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add port change event handling logic for MPESW LAG mode, ensuring
VFs are updated when the speed of LAG physical ports changes.
This triggers a speed update workflow when relevant port state changes
occur, enabling consistent and accurate reporting of VF bandwidth.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, vports report only their parent's uplink speed, which in LAG
setups does not reflect the true aggregated bandwidth. This makes it
hard for upper-layer software to optimize load balancing decisions
based on accurate bandwidth information.
Fix the issue by calculating the possible maximum speed of a LAG as
the sum of speeds of all active uplinks that are part of the LAG.
Propagate this effective max speed to vports associated with the LAG
whenever a relevant event occurs, such as physical port link state
changes or LAG creation/modification.
With this change, upper-layer components receive accurate bandwidth
information corresponding to the active members of the LAG and can
make better load balancing decisions.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce the max_tx_speed field to the query and modify_vport_state
structures.
Add the esw_vport_state_max_tx_speed capability bit, indicating
the firmware support modifying the max_tx_speed field via the
MODIFY_VPORT_STATE command.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
During a reset, software-generated WCs cannot be reported via
interrupts. This may cause the ULP to miss some WCs.
To avoid this, add check in the CQ arm process: if a hardware reset
has occurred and there are still unreported soft-WCs, notify the ULP
to handle the remaining WCs, thereby preventing any loss of completions.
Fixes: 626903e935 ("RDMA/hns: Add support for reporting wc as software mode")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
DSCP is not supported in RoCEv1, but get_dscp() is still called. If
get_dscp() returns an error, it'll eventually cause create_ah to fail
even when using RoCEv1.
Correct the return value and avoid calling get_dscp() when using
RoCEv1.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
query_cqc() and query_mpt() may return various error codes in
different cases. Return actual error code instead of fixed EINVAL.
Fixes: f2b070f36d ("RDMA/hns: Support CQ's restrack raw ops for hns driver")
Fixes: 3d67e7e236 ("RDMA/hns: Support MR's restrack raw ops for hns driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
Fixes: ffd541d457 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some HCAs (e.g: ConnectX4) do not trigger a IB_EVENT_GID_CHANGE on
subnet prefix update from SM (PortInfo).
Since the commit d58c23c925 ("IB/core: Only update PKEY and GID caches
on respective events"), the GID cache is updated exclusively on
IB_EVENT_GID_CHANGE. If this event is not emitted, the subnet prefix in the
IPoIB interface’s hardware address remains set to its default value
(0xfe80000000000000).
Then rdma_bind_addr() failed because it relies on hardware address to
find the port GID (subnet_prefix + port GUID).
This patch fixes this issue by updating the GID cache on
IB_EVENT_CLIENT_REREGISTER event (emitted on PortInfo::ClientReregister=1).
Fixes: d58c23c925 ("IB/core: Only update PKEY and GID caches on respective events")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Link: https://patch.msgid.link/aVUfsO58QIDn5bGX@eaujamesFR0130
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In limit_bank mode, QPs/CQs are restricted to using half of the banks.
HW concentrates resources on these banks, thereby improving performance
compared to the default mode.
Switch between limit_bank mode and default mode by setting the cap
flag in FW. Since the number of QPs and CQs will be halved, this mode
is suitable for scenarios where fewer QPs and CQs are required.
Signed-off-by: Lianfa Weng <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251230154911.3397584-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Here are some small USB fixes, and bunch of reverts for 6.19-rc3.
Included in here are:
- reverts of some typec ucsi driver changes that had a lot of
regression reports after -rc1. Let's just revert it all for now and
it will come back in a way that is better tested.
- other typec bugfixes
- usb-storage quirk fixups
- dwc3 driver fix
- other minor USB fixes for reported problems.
All of these have passed 0-day testing and individual testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaVElGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMeQCgzsZZNX7AtfUXlHkFENzlKFyAYZEAn0Nl01xd
BBKmE3GqGMWsVIJ2T0AI
=cjZ8
-----END PGP SIGNATURE-----
Merge tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes, and bunch of reverts for 6.19-rc3.
Included in here are:
- reverts of some typec ucsi driver changes that had a lot of
regression reports after -rc1. Let's just revert it all for now and
it will come back in a way that is better tested.
- other typec bugfixes
- usb-storage quirk fixups
- dwc3 driver fix
- other minor USB fixes for reported problems.
All of these have passed 0-day testing and individual testing"
* tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
Revert "usb: typec: ucsi: Update UCSI structure to have message in and message out fields"
Revert "usb: typec: ucsi: Add support for message out data structure"
Revert "usb: typec: ucsi: Enable debugfs for message_out data structure"
Revert "usb: typec: ucsi: Add support for SET_PDOS command"
Revert "usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common"
Revert "usb: typec: ucsi: Get connector status after enable notifications"
usb: ohci-nxp: clean up probe error labels
usb: gadget: lpc32xx_udc: clean up probe error labels
usb: ohci-nxp: fix device leak on probe failure
usb: phy: isp1301: fix non-OF device reference imbalance
usb: gadget: lpc32xx_udc: fix clock imbalance in error path
usb: typec: ucsi: Get connector status after enable notifications
usb: usb-storage: Maintain minimal modifications to the bcdDevice range.
usb: dwc3: of-simple: fix clock resource leak in dwc3_of_simple_probe
usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common
USB: lpc32xx_udc: Fix error handling in probe
usb: typec: altmodes/displayport: Drop the device reference in dp_altmode_probe()
usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal
usb: renesas_usbhs: Fix a resource leak in usbhs_pipe_malloc()
usb: typec: ucsi: huawei-gaokin: add DRM dependency
...
Here are some small serial driver fixes for some reported issues.
Included in here are:
- serial sysfs fwnode fix that was much reported
- sh-sci driver fix
- serial device init bugfix
- 8250 bugfix
- xilinx_uartps bugfix
All of these have passed 0-day testing and individual testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaVEl7A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn1AgCfYUqy05A3BNhwOfhzoJ2ToKn/aZkAn0iYT/06
vLBTQBtVhoMff9CneVvu
=eNi3
-----END PGP SIGNATURE-----
Merge tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported issues.
Included in here are:
- serial sysfs fwnode fix that was much reported
- sh-sci driver fix
- serial device init bugfix
- 8250 bugfix
- xilinx_uartps bugfix
All of these have passed 0-day testing and individual testing"
* tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: fix rs485 delay_rts_after_send
serial: sh-sci: Check that the DMA cookie is valid
serial: core: Fix serial device initialization
serial: 8250: longson: Fix NULL vs IS_ERR() bug in probe
serial: core: Restore sysfs fwnode information
A fix for PCI driver for Texas Instruments PCILyx series. The driver had
a bug where it allocated a DMA-coherent buffer of 16 KB but released it
using PAGE_SIZE. This disproportion was reported in 2020, but the fix was
never merged. It is finally resolved.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaVEkHAAKCRCsLtaWM8Lw
E47xAQCakWPjeQ1S64vK9lmNAcUjWRw/YhacDLVv3euEBjSzuwEAwvK3pPv95IlA
fO6V8UVJN+Lg5dwusM+fdleZqvR4mQ4=
=UZIn
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A fix for PCI driver for Texas Instruments PCILyx series.
The driver had a bug where it allocated a DMA-coherent buffer of 16 KB
but released it using PAGE_SIZE. This disproportion was reported in
2020, but the fix was never merged. It is finally resolved"
* tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: Fix dma_free_coherent() size
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can be
used for stateful RISC-V ISA extensions beyond the vector extension
- Add the SBI extension ID and some initial data structure definitions
for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded "fence rw,rw" instructions
-----BEGIN PGP SIGNATURE-----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=Pgyz
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to: Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain, Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD), Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar Dronamraju, Stan Johnson
-----BEGIN PGP SIGNATURE-----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=mQlX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian
Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain,
Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh
Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD),
Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar
Dronamraju, and Stan Johnson
* tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
powerpc/powernv: Enable cpuidle state detection for POWER11
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
powerpc/tools: drop `-o pipefail` in gcc check scripts
selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore
powerpc/kexec: Enable SMT before waking offline CPUs
We've got more fixes here for the Cadence QSPI controller, this time
fixing some issues that come up when working with slower flashes on some
platforms plus a general race condition.
We also add support for the Allwinner A523, this is just some new
compatibles.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmlPvm0ACgkQJNaLcl1U
h9BwWgf+MWIgqU0Rh8de+IiEkrfp82V9Xz5ZNKqgtvlyJdp41QG3SAukmy2LBtYK
RO9RzZcaBse/uLvEgZZO9sEvPgQHakn0p60EgJEhwKHP+lCt1EfaDKv1kbvAATwl
urtZE8YDHu6SITJvPobmIykCgr/yODpcMWfyyRNxmoZFb3LYQiXV3pbWem0VBdn/
ZJ2QBEKYyLSkYgqiZmhosgGyWI8nXml7xhHY6EunvbWWXb599aQoPS44Y3aTwftB
8lZ4fMWTGwTsRqc0eh2dCrVCLNpGLSM4T0/R2VvpW058Tu877yD+4w4vd1O++2kF
HbphKV5TvUUpR+Ivo4LSPsQ4fGaLxg==
=ASmz
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"We've got more fixes here for the Cadence QSPI controller, this time
fixing some issues that come up when working with slower flashes on
some platforms plus a general race condition.
We also add support for the Allwinner A523, this is just some new
compatibles"
* tag 'spi-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is slow
spi: cadence-quadspi: Prevent lost complete() call during indirect read
spi: sun6i: Support A523's SPI controllers
spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers
A couple of fixes from Thomas, making the UAPI headers more robustly
correct and ensuring they are covered by checkpatch, and one from
Andreas fixing an update for a change to the DT bindings that I missed
was requested during bindings review in the newly added fp9931 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmlPvaEACgkQJNaLcl1U
h9A9Ogf9Fp1tjyQK1onQZlG9EcPGF2gZ3wTKdxEb1PZOx7ioyLUrQHtB1b1wPpEr
Wniq2BxsG4yqGxaBPSiA7NsLe35CgozvDNy/kJXAcPsix9ZKEMtcjQuZQ9hD8fR9
SWYLMoey/hZDu/OdF7pnmOEjm9WmXjQ1ielfaAEzwV7rgkZkWSsslj04joYsMcFX
ESO12jea/pHBj5nI0nfSaRH5UW+spyR3KScU1Z3RP23boG3+ZtT6NK1Kyx3K+x5V
k0d71rDcqIKn/QYEF651H0RIsrJ8BYd85QAtCW+Of4ATCNttTgeKLN8ZhC91gOns
VlCogXA+t85KzmVtLH5Fia98lJu+ig==
=0hFe
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes from Thomas, making the UAPI headers more robustly
correct and ensuring they are covered by checkpatch, and one from
Andreas fixing an update for a change to the DT bindings that I missed
was requested during bindings review in the newly added fp9931 driver"
* tag 'regulator-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fp9931: fix regulator node pointer
regulator: Add UAPI headers to MAINTAINERS
regulator: uapi: Use UAPI integer type
Fixes for v6.19:
GPU:
- Fix crash on a7xx GPUs not supporting IFPC
- Fix perfcntr use with IFPC
- Concurrent binning fix
DPU:
- Fixed DSC and SSPP fetching issues
- Switched to scnprint instead of snprintf
- Added missing NULL checks in pingpong code
Also documentation fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV01jcLLChsFtmqc4VDNoQ2ic2q+d86n3wdoSUdmW6xaSdQ@mail.gmail.com
Three HBA driver and one upper level driver (sg) fix. The sg change
is the largest, but that results mostly from moving code to avoid the
described race condition.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaU9UWRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUsFQEA49RD3/43W3fNYU1RfqcjDFmaJgDeUpvk
q+JF6RTzjaQA/j7t4sGNLnPq8kDBhacYhStIFUUMoeHkiS8Nq+s0TuWL
=T0c1
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three HBA driver and one upper level driver (sg) fix.
The sg change is the largest, but that results mostly from moving code
to avoid the described race condition"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add ufshcd_update_evt_hist() for UFS suspend error
scsi: sg: Fix occasional bogus elapsed time that exceeds timeout
scsi: mpi3mr: Read missing IOCFacts flag for reply queue full overflow
scsi: scsi_debug: Fix atomic write enable module param description
- Introduce DMA Rust helpers to avoid build errors when !CONFIG_HAS_DMA.
- Remove unnecessary (and hence incorrect) endian conversion in the Rust
PCI driver sample code.
- Fix memory leak in the unwind path of debugfs_change_name().
- Support non-const struct software_node pointers in
SOFTWARE_NODE_REFERENCE(), after introducing _Generic().
- Avoid NULL pointer dereference in the unwind path of
simple_xattrs_free().
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaU7O/wAKCRBFlHeO1qrK
LirZAPoCljVnVVZoA1oesoyIQ8KWDdoC55dfUZyCp4yz87MvjgD/e1Gw1o+y3YyS
dut7ODDimiUPh0I54nMX4l561NMVggU=
=v3Qg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Introduce DMA Rust helpers to avoid build errors when !CONFIG_HAS_DMA
- Remove unnecessary (and hence incorrect) endian conversion in the
Rust PCI driver sample code
- Fix memory leak in the unwind path of debugfs_change_name()
- Support non-const struct software_node pointers in
SOFTWARE_NODE_REFERENCE(), after introducing _Generic()
- Avoid NULL pointer dereference in the unwind path of
simple_xattrs_free()
* tag 'driver-core-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
fs/kernfs: null-ptr deref in simple_xattrs_free()
software node: Also support referencing non-constant software nodes
debugfs: Fix memleak in debugfs_change_name().
samples: rust: fix endianness issue in rust_driver_pci
rust: dma: add helpers for architectures without CONFIG_HAS_DMA
A couple of fixes for EFI regressions introduced this cycle:
- Make EDID handling in the EFI stub mixed mode safe
- Ensure that efi_mm.user_ns has a sane value - this is needed now that
EFI runtime calls are preemptible on arm64
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaU694AAKCRAwbglWLn0t
XJHoAPsHkA4g+rRXXhqgysWvqQvGWTrWLiVHPeDOs3dAWTxHpQD+KTNVaW4H+BCz
x+5S3unu5q9PxWOwqeoCi2JvkKKjJwE=
=fb7r
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A couple of fixes for EFI regressions introduced this cycle:
- Make EDID handling in the EFI stub mixed mode safe
- Ensure that efi_mm.user_ns has a sane value - this is needed now
that EFI runtime calls are preemptible on arm64"
* tag 'efi-fixes-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
kthread: Warn if mm_struct lacks user_ns in kthread_use_mm()
arm64: efi: Fix NULL pointer dereference by initializing user_ns
efi/libstub: gop: Fix EDID support in mixed-mode
-----BEGIN PGP SIGNATURE-----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=DwyX
-----END PGP SIGNATURE-----
Merge tag 'block-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix for a signedness issue introduced in this kernel release for rnbd
- Fix up user copy references for ublk when the server exits
* tag 'block-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: rnbd-clt: Fix signedness bug in init_dev()
ublk: clean up user copy references on ublk server exit
-----BEGIN PGP SIGNATURE-----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=vmEn
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix for a bug that can cause a leak of the filename with
IORING_OP_OPENAT, if direct descriptors are asked for and O_CLOEXEC
has been set in the request flags"
* tag 'io_uring-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix filename leak in __io_openat_prep()
Just a bunch of fixes, mostly trivial ones in tools/virtio
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmlOnSYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpLvsH/RiAvtYIimnu5XEuk013EB9T4WXn8dE4pDRt
EwZyJie+Ox99ZpNTLEgqpN4jyOQzJ7udVIgbHANR0SWqHtXzYV39I5tI7ZCJ951F
/CXax7INc/oS0s0bHpMKhji8U0FTvtrBY0d9FgvmVTXJpEhnwyKPKx0Z8eJEvaaU
1OCpMNOhbx5EIS9CWvxyJtcc8y2jY6CO855BCph3IdCdUlOTJLrJ6nPdAyP2RRuL
+pjsWRH/ZKhYpL5zmLbTDduRTDaKdns00sMMN6xqjNgu4bgvBo2DM5ljZrRKoFTB
zZAQsitIjR5nxcrtv1QxEeL32XENkb4iXOb9T96+3veEwk9SlRM=
=Ofvg
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Just a bunch of fixes, mostly trivial ones in tools/virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/vsock: improve RCU read sections around vhost_vsock_get()
tools/virtio: add device, device_driver stubs
tools/virtio: fix up oot build
virtio_features: make it self-contained
tools/virtio: switch to kernel's virtio_config.h
tools/virtio: stub might_sleep and synchronize_rcu
tools/virtio: add struct cpumask to cpumask.h
tools/virtio: pass KCFLAGS to module build
tools/virtio: add ucopysize.h stub
tools/virtio: add dev_WARN_ONCE and is_vmalloc_addr stubs
tools/virtio: stub DMA mapping functions
tools/virtio: add struct module forward declaration
tools/virtio: use kernel's virtio.h
virtio: make it self-contained
tools/virtio: fix up compiler.h stub
-----BEGIN PGP SIGNATURE-----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=Qr9r
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix parsing of SMB1 negotiate request by adjusting offsets affected
by the removal of the RFC1002 length field from the SMB header
- Update minimum PDU size macros for both SMB1 and SMB2
- Rename smb2_get_msg function to smb_get_msg to better reflect its
role in handling both SMB1 and SMB2 requests
* tag 'v6.19-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd:
smb/server: fix minimum SMB2 PDU size
smb/server: fix minimum SMB1 PDU size
ksmbd: rename smb2_get_msg to smb_get_msg
ksmbd: Fix to handle removal of rfc1002 header from smb_hdr
It looks like the buffer allocated and mapped in add_card() is done
with size RCV_BUFFER_SIZE which is 16 KB and 4KB.
Fixes: 286468210d ("firewire: new driver: nosy - IEEE 1394 traffic sniffer")
Co-developed-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Co-developed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20251216165420.38355-2-fourier.thomas@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
__io_openat_prep() allocates a struct filename using getname(). However,
for the condition of the file being installed in the fixed file table as
well as having O_CLOEXEC flag set, the function returns early. At that
point, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this,
the memory for the newly allocated struct filename is not cleaned up,
causing a memory leak.
Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the
successful getname() call, so that when the request is torn down, the
filename will be cleaned up, along with other resources needing cleanup.
Reported-by: syzbot+00e61c43eb5e4740438f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=00e61c43eb5e4740438f
Tested-by: syzbot+00e61c43eb5e4740438f@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Fixes: b9445598d8 ("io_uring: openat directly into fixed fd table")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a WARN_ON_ONCE() check to detect mm_struct instances that are
missing user_ns initialization when passed to kthread_use_mm().
When a kthread adopts an mm via kthread_use_mm(), LSM hooks and
capability checks may access current->mm->user_ns for credential
validation. If user_ns is NULL, this leads to a NULL pointer
dereference crash.
This was observed with efi_mm on arm64, where commit a5baf582f4
("arm64/efi: Call EFI runtime services without disabling preemption")
introduced kthread_use_mm(&efi_mm), but efi_mm lacked user_ns
initialization, causing crashes during /proc access.
Adding this warning helps catch similar bugs early during development
rather than waiting for hard-to-debug NULL pointer crashes in
production.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
