This introduces the new Airoha (MediaTek) EN7581 home networking
platform (routers) in early stages, but with support for its
Evaluation Board, a few more MediaTek based machines, and
improvements for existing ones.
For the MT7981 router SoC we get pinctrl support, along with the
enablement of its watchdog, eFuse/nvmem, I2C and integrated WiFi
controller, other than the introduction of new machines based on
this chip: the Cudy WR3000 V1 router and the OpenWRT One.
MT7986 gets a new machine: the BananaPi R3 Mini.
Some advancements have been done also on the MT7988 SoC, which
gains support for its I2C, PWM and USB XHCI controllers.
MediaTek Genio SoCs also get attention, with the introduction of a
basic device tree for the MT8390 Genio 700-EVK board, and for the
MT8395 Genio 1200 powered Kontron 3.5"-SBC-i1200.
Additionally, the Genio 1200 Radxa NIO12L board gets support for
USB Role Switching and proper PCI-Express controller PM suspend
and resume, other than finally enabling CPU and GPU frequency
and voltage scaling for improved efficiency.
Speaking of MediaTek Kompanio SoCs (Chromebooks) instead, thanks
to community interest and help in testing, there comes support for
the MT8195-powered HP Chromebook X360 13b-ca0002sa, while Google
contributed support for the MT8186-powered Acer Chromebook 311.
Moreover, MT8188 gets support for its integrated power domains,
other than its Global Command Engine (GCE) mailboxes, initial
basic support for the VDO0/1 blocks for multimedia, and its GPU
(ARM Mali G57-MC3, Valhall-JM) with Panfrost.
Besides that, this also adds a few other cleanups and improvements
for all machines using the MT8183, MT8192, MT8195/MT8395 SoCs and
adds generation of symbols on base devicetrees of machines using
Device Tree Overlay(s) (DTBO).
In particular:
- The MediaTek Smart Voltage Scaling (SVS) is now fully working
those SoCs, bringing further power efficiency improvements;
- Thermal zones were refactored on MT8183 for consistency with
the other MediaTek SoCs and for readability
- Sound DAI links are now consistently specified in device tree
on MT8195 and MT8186 machines
- Newly supported machines/boards
- EN7581: EVK
- MT7981: Cudy WR3000 V1, OpenWRT One
- MT7986: BananaPi R3 Mini
- MT8186: Acer Chromebook 311 (Corsola Voltorb)
- MT8195: HP Chromebook X360 13b-ca0002sa (Cherry Dojo)
- MT8390/8188: Genio 700 EVK
- Some cleanups for unused/legacy devicetree properties
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZn0thSgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4B94BANp1
sg23FYuR+RIMOtJ7542D1HVRr/l3D27XFSAw0yjbAP9cTg5ps+SR4fsr+ipectwP
MBqhJLJu7KriAl63aY2/BQ==
=paIN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lO7d
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DTS updates for v6.11
This introduces the new Airoha (MediaTek) EN7581 home networking
platform (routers) in early stages, but with support for its
Evaluation Board, a few more MediaTek based machines, and
improvements for existing ones.
For the MT7981 router SoC we get pinctrl support, along with the
enablement of its watchdog, eFuse/nvmem, I2C and integrated WiFi
controller, other than the introduction of new machines based on
this chip: the Cudy WR3000 V1 router and the OpenWRT One.
MT7986 gets a new machine: the BananaPi R3 Mini.
Some advancements have been done also on the MT7988 SoC, which
gains support for its I2C, PWM and USB XHCI controllers.
MediaTek Genio SoCs also get attention, with the introduction of a
basic device tree for the MT8390 Genio 700-EVK board, and for the
MT8395 Genio 1200 powered Kontron 3.5"-SBC-i1200.
Additionally, the Genio 1200 Radxa NIO12L board gets support for
USB Role Switching and proper PCI-Express controller PM suspend
and resume, other than finally enabling CPU and GPU frequency
and voltage scaling for improved efficiency.
Speaking of MediaTek Kompanio SoCs (Chromebooks) instead, thanks
to community interest and help in testing, there comes support for
the MT8195-powered HP Chromebook X360 13b-ca0002sa, while Google
contributed support for the MT8186-powered Acer Chromebook 311.
Moreover, MT8188 gets support for its integrated power domains,
other than its Global Command Engine (GCE) mailboxes, initial
basic support for the VDO0/1 blocks for multimedia, and its GPU
(ARM Mali G57-MC3, Valhall-JM) with Panfrost.
Besides that, this also adds a few other cleanups and improvements
for all machines using the MT8183, MT8192, MT8195/MT8395 SoCs and
adds generation of symbols on base devicetrees of machines using
Device Tree Overlay(s) (DTBO).
In particular:
- The MediaTek Smart Voltage Scaling (SVS) is now fully working
those SoCs, bringing further power efficiency improvements;
- Thermal zones were refactored on MT8183 for consistency with
the other MediaTek SoCs and for readability
- Sound DAI links are now consistently specified in device tree
on MT8195 and MT8186 machines
- Newly supported machines/boards
- EN7581: EVK
- MT7981: Cudy WR3000 V1, OpenWRT One
- MT7986: BananaPi R3 Mini
- MT8186: Acer Chromebook 311 (Corsola Voltorb)
- MT8195: HP Chromebook X360 13b-ca0002sa (Cherry Dojo)
- MT8390/8188: Genio 700 EVK
- Some cleanups for unused/legacy devicetree properties
* tag 'mtk-dts64-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (58 commits)
arm64: dts: mediatek: Declare drive-strength numerically
arm64: dts: mt7622: fix switch probe on bananapi-r64
arm64: dts: mediatek: Add MT8186 Voltorb Chromebooks
dt-bindings: arm: mediatek: Add MT8186 Voltorb Chromebooks
arm64: dts: mediatek: Makefile: Generate symbols for DTBO support
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add ports node for anx7625
arm64: dts: mediatek: mt8183-pico6: Fix wake-on-X event node names
arm64: dts: mt8173: Add G2Touch touchscreen node
arm64: dts: mediatek: mt8183-kukui: Fix the value of `dlg,jack-det-rate` mismatch
arm64: dts: mediatek: mt8188: Add support for Mali GPU on Panfrost
arm64: dts: mediatek: mt8188: Add support for SoC power domains
arm64: dts: mediatek: mt8188: Add VDOSYS0/1 support for multimedia
arm64: dts: mediatek: mt8188: Add Global Command Engine mailboxes
arm64: dts: mediatek: mt8173-elm: drop PMIC's syscon node
arm64: dts: mediatek: mt8365: use a specific SCPSYS compatible
arm64: dts: mediatek: mt8365: drop incorrect power-domain-cells
arm64: dts: mediatek: mt7981: add I2C controller
arm64: dts: mediatek: mt7622: fix "emmc" pinctrl mux
arm64: dts: mediatek: mt7988: add I2C controllers
arm64: dts: mediatek: mt7988: add PWM controller
...
Link: https://lore.kernel.org/r/20240628093801.126013-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
_ Add #thermal-sensor-cells property on stih410.dtsi and stih418.dtsi
_ Add thermal-zones support on stih418
_
-----BEGIN PGP SIGNATURE-----
iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmZ+clQcHHBhdHJpY2Uu
Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/phdhD/wNUl+56Hg/xmIuy0UC
Fa6PV8V0K46iLwEWYepkMfigDPXibmFmMdRMypzuX2f3zu1NlQQE7aF7N6hocIVX
TuoHPh7pCwcQwoTfV7XUtIaMZZfVyPr4GkSqYiu6KMDjcJglUzktiehcqrRp6w2j
4CUxUuM0gdgL+PpomJm3ZefWYPQgUyEjeKF066w+36BghJ/uE/9ZSj0twmIexfGR
/FXN5p9UUZBYfG/A8YwJsGrUByhgmhxIVt/mpr2OUQ2NP7frigjnwzHuyroaR4Jm
AwdaIDkKHYPOET09kkzUY0gW+Vk4EgiLTqQPp6Qv7u8KANGZ9wtgz8bMjgEFkXoC
KaSU3tv0P1mE/ZzW/j3M1BuaHnupuwQPZiNdvbJ82RkmBtDGJP0Kr0coMpKiXvGG
VAp1XSsCO+1JmH3GDIK7sOcfZVSy8OI58DVZ+K9o7ZYRD8fDP57bhrcZivYDyHP5
82Wqlm5NuMpuLPvlTSQyft6QW+V2woHqxSoybJEjB+YRS3gniYatyrCfc7ugTLGt
SXYoUF2IJfVPAIMWyWXwEV/2kWtXLJjkHO5BNKkC8VhkLsK+MpVwDiEMKUDWz2A1
hVD8VCYxoRB6FgwJPUQe4UVmyeN5Jw794aUy2Lk3UD627eGWYYvS11qmAdDIgIVQ
QgZMxwXm2Fp4GotxxJDl26MkVQ==
=lbQi
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v6.11-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
STi DT for v6.11 :
_ Add #thermal-sensor-cells property on stih410.dtsi and stih418.dtsi
_ Add thermal-zones support on stih418
_
There's not much reason to have multiple fixed-factor-clock instances
which are all the same factor and clock input. Drop the nodes, but keep
the labels to minimize the changes and keep some distinction of the
different clocks.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240528191536.1444649-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240627-arm-dts-fixes-v1-1-40a2cb7d344b@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a 'thermal-zones' node for stih418.
A thermal-zone needs three components:
- thermal sensors, described in an earlier commit[1]
- cooling devices, specified for each CPU
- a thermal zone, describing the overall behavior.
The thermal zone needs references to both CPUs and thermal sensors,
which phandle are also added. The thermal management will then be
achieved on CPUs using the cpufreq framework.
[1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Addition of dedicated FPGA syscon compatible for Juno platforms. Also
enablement of GPU device node now that the panfrost driver is already
enabled as a module in defconfig.
-----BEGIN PGP SIGNATURE-----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=trlg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lU78
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Arm Juno updates for v6.11
Addition of dedicated FPGA syscon compatible for Juno platforms. Also
enablement of GPU device node now that the panfrost driver is already
enabled as a module in defconfig.
* tag 'juno-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable GPU
arm64: dts: juno: add dedicated FPGA syscon compatible
dt-bindings: arm: arm,juno-fpga-apb-regs: document FPGA syscon
Link: https://lore.kernel.org/r/20240620093924.375244-2-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for the second and third Ethernet interfaces on the
White Hawk development board,
- Add support for the second Ethernet interface on the RZ/N1 SoC,
- Add I2C EEPROM support for the Condor-I development board,
- Add video capture support for the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZmv/jAAKCRCKwlD9ZEnx
cNnMAQCcV1ReuhVkemL08Y18kumtj7Mb9L4DgrSuXHhg0h88+gD+OJ2IRa+50CV9
wg830gqRhFvwdL+A3oAKvSKsfvjVIAI=
=jGtG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=guZW
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.11
- Add support for the second and third Ethernet interfaces on the
White Hawk development board,
- Add support for the second Ethernet interface on the RZ/N1 SoC,
- Add I2C EEPROM support for the Condor-I development board,
- Add video capture support for the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779h0: Add video capture nodes
arm64: dts: renesas: r9a08g045: Update fallback string for SDHI nodes
arm64: dts: renesas: rzg2l: Update fallback string for SDHI nodes
arm64: dts: renesas: r9a09g011: Update fallback string for SDHI nodes
arm64: dts: renesas: s4sk: Add aliases for I2C buses
arm64: dts: renesas: spider-cpu: Add aliases for I2C buses
arm64: dts: renesas: white-hawk-cpu: Add aliases for I2C buses
arm64: dts: renesas: condor-i: Add I2C EEPROM
arm64: dts: renesas: gray-hawk-single: Add aliases for I2C buses
ARM: dts: renesas: r9a06g032: Describe GMAC1
arm64: dts: renesas: white-hawk: ethernet: Describe AVB1 and AVB2
arm64: dts: renesas: r8a779g0: Use MDIO node for all AVB devices
Link: https://lore.kernel.org/r/cover.1718355312.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some devicetrees, the drive-strength property gets assigned a
MTK_DRIVE_(x)_mA definition, which matches with (x).
For example, MTK_DRIVE_8mA equals to 8 and MTK_DRIVE_30mA equals
to 30.
Also keeping in mind that the drive-strength property is, by
(binding) definition, taking a number in milliamperes unit,
change all devicetrees to avoid the usage of any MTK_DRIVE_(x)
definition.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620101656.1096374-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
After commit 868ff5f494
("net: dsa: mt7530-mdio: read PHY address of switch from device tree")
the mt7531 switch on Bananapi-R64 was not detected.
mt7530-mdio mdio-bus:00: reset timeout
mt7530-mdio mdio-bus:00: probe with driver mt7530-mdio failed with error -110
Fix this by adding phy address in devicetree.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20240516204847.171029-1-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add device trees for the MT8186 based Voltorb Chromebooks, also known
as the Acer Chromebook 311 (C723/C723T). The devices are clamshell
style laptops with an optional touchscreen.
The devices differ from the other existing MT8186 Chromebooks in that
it uses a higher speced / binned SoC which also requires a separate
PMIC for the big core cluster. Also, a different codec is used for
the internal speakers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620094746.2404753-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add an entry for the MT8186 based Voltorb Chromebooks, also known as the
Acer Chromebook 311 (C723/C723T). The device is a clamshell style laptop
with an optional touchscreen.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240620094746.2404753-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add DTC_FLAGS '-@' for mt7986a-bananapi-bpi-r3 and -mini to
instruct the devicetree compiler to enable generation of symbols.
This allows proper support for Device Tree Overlay(s) for those
boards; future boards that need DTBO support are expected to add
their own DTC_FLAGS_{dtb-name}.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240620101830.1097548-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The anx7625 binding requires a "ports" node as a container for the
"port" nodes. The jacuzzi dtsi file is missing it.
Add a "ports" node under the anx7625 node, and move the port related
nodes and properties under it.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131083931.3970388-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The wake-on-bt and wake-on-wlan nodes don't have a button- or event-
prefix that the gpio-keys binding requires.
Fix up the node names to satisfy the binding. While at it, also fix up
the GPIO overriding structure for the wake-on-wlan node. Instead of
referencing the gpio-keys node and then open coding the node, add a
label for the event node, and use that to reference and override the
GPIO settings.
Fixes: 055ef10ccd ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131084043.3970576-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Lenovo Ideapad C330 Chromebook (MTK) uses G2Touch touchscreen as a
second source component.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231115043511.2670477-1-treapking@chromium.org
[Angelo: Rebased and added comment]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
According to Documentation/devicetree/bindings/sound/dialog,da7219.yaml,
the value of `dlg,jack-det-rate` property should be "32_64" instead of
"32ms_64ms".
Fixes: dc0ff0fa3a ("ASoC: da7219: Add Jack insertion detection polarity")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20240613-jack-rate-v2-1-ebc5f9f37931@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
According to AngeloGioacchino Del Regno, the syscon node in PMIC is
neither needed nor used. It looks like a solution to expose some of the
registers of PMIC.
Drop it to solve also incorrect number of entries in the "reg" property
and fix dtbs_check warning:
mt8173-elm.dtb: syscon@c000: reg: [[0, 49152], [0, 264]] is too long
Link: https://lore.kernel.org/all/671a4b1e-3d95-438c-beae-d967e0ad1c77@collabora.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612092421.52917-3-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
SoCs should use dedicated compatibles for each of their syscon nodes to
precisely describe the block. Using an incorrect compatible does not
allow to properly match/validate children of the syscon device. Replace
SYSCFG compatible, which does not have children, with a new dedicated
one for SCPSYS block.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612092421.52917-2-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The top SCPSYS node is not a power domain provider. It's child
"power-controller" is instead.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612092421.52917-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7981 has one on-SoC I2C controller that differs from recent Mediatek
blocks by having a different SLAVE_ADDR register offset (thus a custom
binding compatible string).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240604063159.29216-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Value "emmc_rst" is a group name and should be part of the "groups"
property.
This fixes:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: pinctrl@10211000: emmc-pins-default:mux:function: ['emmc', 'emmc_rst'] is too long
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: pinctrl@10211000: emmc-pins-default:mux:function: ['emmc', 'emmc_rst'] is too long
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
Fixes: 3725ba3f55 ("arm64: dts: mt7622: add pinctrl related device nodes")
Fixes: 0b6286dd96 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604074916.7929-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7988 has three on-SoC I2C controllers that are the same hardware
blocks as already noticed on MT7981 chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240604064302.487-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7988 has on-SoC controller that can control up to 8 PWM interfaces.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240604064302.487-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
OpenWrt One is the first ever OpenWrt product. It's based on MT7981B
(AKA Filogic 820) and has 1 GiB or DDR4 RAM. The rest of peripherals
remains to be added later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240527115933.7396-4-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
OpenWrt One is the first ever OpenWrt product. It's based on MT7981B and
has entered an early production stage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240527115933.7396-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
OpenWrt project (with the help of MediaTek and Banana Pi) has produced
its very first own hardware. It needs its own prefix.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240527115933.7396-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add MT7988A based BananaPi R3 Mini.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240510095707.6895-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7981 (Filogic 820) uses efuse for storing calibration data.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240514015154.11206-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Align "clocks" array entries to start at the same column.
Fixes: cf29427573 ("arm64: dts: mediatek: Add initial MT7981B and Xiaomi AX3000T")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240405105030.24559-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Overlay syntactic sugar for generating target-path fragments is
supported by the version of dtc supplied with the kernel since commit
50aafd6089 ("scripts/dtc: Update to upstream version
v1.4.6-21-g84e414b0b5bc"). Hence convert the Bananapi R3 overlay
devicetree source files to sugar syntax, improving readability.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2fd900a30b5a0f7de4ea68f60bac250794b8cdb4.1716984213.git.geert+renesas@glider.be
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Set off-on-delay-us to 500000 us for pp3300_mipibrdg to make sure it
complies with the panel's unprepare delay (the time to power down
completely) of the power sequence. Explicit configuration on the
regulator node is required because mt8192-asurada uses the same power
supply for the panel and the anx7625 DP bridge.
For example, the power sequence could be violated in this sequence:
1. Bridge on: panel goes off, but regulator doesn't turn off (refcount=1).
2. Bridge off: regulator turns off (refcount=0).
3. Bridge resume -> regulator turns on but the bridge driver doesn't
check the delay.
Or in this sequence:
1. Bridge on: panel goes off. The regulator doesn't turn off (refcount=1),
but the .unprepared_time in panel_edp is still updated.
2. Bridge off, regulator goes off (refcount=0).
3. Panel on, but the panel driver uses the wrong .unprepared_time to check
the unprepare delay.
Fixes: f9f00b1f6b ("arm64: dts: mediatek: asurada: Add display regulators")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240502154455.3427793-1-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add basic support for the Kontron 3.5" single board computer featuring a
Mediatek i1200 SoC (MT8395/MT8195).
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240408080816.4134370-2-mwalle@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the compatible string for the Kontron 3.5"-SBC-i1200 single board
computer.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240408080816.4134370-1-mwalle@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This patch fixes an issue where xhci1 was not functioning properly because
the state and PHY settings were incorrect.
The introduction of the 'force-mode' property in the phy-mtk-tphy driver
allows for the correct initialization of xhci1 by updating the Device Tree
settings accordingly.
The necessary fixup which added support for the 'force-mode' switch in the
phy-mtk-tphy driver.
commit 9b27303003 ("phy: mediatek: tphy: add support force phy mode switch")
Link: https://lore.kernel.org/r/20231211025624.28991-2-chunfeng.yun@mediatek.com
Prior to this fix, the system would exhibit the following probe failure messages
for xhci1:
xhci-mtk 11290000.usb: supply vbus not found, using dummy regulator
xhci-mtk 11290000.usb: uwk - reg:0x400, version:104
xhci-mtk 11290000.usb: xHCI Host Controller
xhci-mtk 11290000.usb: new USB bus registered, assigned bus number 5
xhci-mtk 11290000.usb: clocks are not stable (0x1003d0f)
xhci-mtk 11290000.usb: can't setup: -110
xhci-mtk 11290000.usb: USB bus 5 deregistered
xhci-mtk: probe of 11290000.usb failed with error -110
With the application of this dts fixup, the aforementioned initialization errors
are resolved and xhci1 is working.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20240216095751.4937-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a devicetree for the Cherry Dojo (HP Chromebook x360 13b-ca0002sa)
convertible type machine.
Differences with the already supported Tomato machines include:
- Different speaker amplifiers (Dual MAX98380, one per channel)
- I2C Touchscreen is on a different address (though still a HID device)
- Has NVMe storage on the PCIe0 controller
- Slightly different keyboard top row keymap
Link: https://lore.kernel.org/r/20240314103500.93158-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the MT8195 Cherry platform's Dojo machine, a convertible design
commercially known as the HP Chromebook x360 (13b-ca0002sa).
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314103500.93158-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The "mediatek,drive-strength-adv" pin config property has been
deprecated in favor of the generic "drive-strength-microamp" property.
Drop or convert all instances. A value of 0 disables the advanced
mode, which is the hardware default.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240412075516.1199846-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The "output-enable" property is set on uart1's RTS pin. This is bogus
because the hardware does not actually have a controllable output
buffer. Secondly, the implementation incorrectly treats this property
as a request to switch the pin to GPIO output. This does not fit the
intended semantic of "output-enable" and it does not have any affect
either because the pin is muxed to the UART function, not the GPIO
function.
Drop the property.
Fixes: cd894e274b ("arm64: dts: mt8183: Add krane-sku176 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240412075613.1200048-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
