This will be needed for Haswell, but already has its uses here.
This patch started as a small patch written patch by Shobhit Kumar,
but it has changed so much that none of its original lines remain.
Credits-to: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have some common code that we always run before calling
intel_dp_set_link_train. This common code sets the correct training
patterns to the DP variable. If we add more calls to
intel_dp_set_link_train, we'll also have to duplicate this common
code. So instead of repeating this code whenever we call
intel_dp_set_link_train, we move the code to inside the function: now
we check which training pattern we're going to set and then we set the
DP register according to it.
One of the side-effects of this change is that now we never forget to
mask the training pattern bits before changing them. It looks like
this was working before because we were first masking the bits, then
writing 00, 01 and then 11.
This patch also enables us to use the intel_dp_set_link_train function
when disabling link training: in this case we need to avoid writing
the DP_TRAINING_LANE*_SET AUX commands.
As a bonus, the big intel_dp_{start,complete}_link_train functions
will get smaller and a little bit easier to read.
Version 2 changes:
- Rewrite commit message.
- Also clear the training pattern bits before changing them.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of having a giant if cascade to figure this out according to
the passed-in register. We could do quite a bit more cleaning up and
all by using the port at more places, but I think this should be part
of a bigger rework to introduce a struct intel_digital_port which
would keep track of all these things. I guess this will be part of
some haswell-DP-induced refactoring.
For now this rips out the big cascade, which is what annoyed me so
much.
v2: Add port variable name back for the func decl (I've tried to trick
myself below the 80 char limit).
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Intel hw only has one MUX for encoders, so outputs are either not
cloneable or all in the same group of cloneable outputs. This neatly
simplifies the code and allows us to ditch some ugly if cascades in
the dp and hdmi init code (well, we need these if cascades for other
stuff still, but that can be taken care of in follow-up patches).
Note that this changes two things:
- dvo can now be cloned with sdvo, but dvo is gen2 whereas sdvo is
gen3+, so no problem. Note that the old code had a bug and didn't
allow cloning crt with dvo (but only the other way round).
- sdvo-lvds can now be cloned with sdvo-non-tv. Spec says this won't
work, but the only reason I've found is that you can't use the
panel-fitter (used for lvds upscaling) with anything else. But we
don't use the panel fitter for sdvo-lvds. Imo this part of Bspec is
a) rather confusing b) mostly as a guideline to implementors (i.e.
explicitly stating what is already implicit from the spec, without
always going into the details of why). So I think we can ignore this
- worst case we'll get a bug report from a user with with sdvo-lvds
and sdvo-tmds and have to add that special case back in.
Because sdvo lvds is a bit special explain in comments why sdvo LVDS
outputs can be cloned, but native LVDS and eDP can't be cloned - we
use the panel fitter for the later, but not for sdvo.
Note that this also uncoditionally initializes the panel_vdd work used
by eDP. Trying to be clever doesn't buy us anything (but strange bugs)
and this way we can kill the is_edp check.
v2: Incorporate review from Paulo
- Add in a missing space.
- Pimp comment message to address his concerns.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Splitting them up between pch and gmch variants just makes it harder
to find things. Especially since the hotplug bits are actually valid
on earlier chips, too.
v2: Fixed the comment as pointed out by Paulo Zanoni.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When bug hunting, I found the interface to do_switch() overly
complicated and I believe festered the earlier bug. This aims to make
the code a little clearer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the DP structure to shared location so that it can be used from
within the ddi module.
Changes from Paulo:
- Move less code to intel_drv.h
- Remove #include statement
- Replace a tab with a space in train_set
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A large enough symbol size causes an overflow in the size parameter to
the histogram allocation, leading to a segfault in
symbol__inc_addr_samples later on when this histogram is accessed.
In the case of being called via perf-report, this returns back and
gracefully ignores the sample, eventually ignoring the chained return
value of perf_session_deliver_event in flush_sample_queue.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1342753525-4521-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel case falls through into the generic case which then changes
the values. For cases like the P6 it doesn't do the right thing so
this seems to be a screwup.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Often no exact match is wanted but just the next lower or
higher item. There's a lot of duplicated code throughout
btrfs to deal with the corner cases. This patch adds a
helper function that can facilitate searching.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Lift the EXDEV condition and allow different root trees for files being
cloned, then pass source inode's root when searching for extents.
Cloning is not allowed to cross vfsmounts, ie. when two subvolumes from
one filesystem are mounted separately.
Signed-off-by: David Sterba <dsterba@suse.cz>
The clk patches added code to get and enable clocks in the
respective driver probe functions. If the probe function failed
for some reason after enabling the clock, the clock was not
disabled again in many cases.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lumm <andrew@lunn.ch>
The last argument of orion_ge00_init() is actually the error
interrupt, so we should be using the correct value here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The TRACEEVENT-CFLAGS file is used to detect any change on compiler
flags. Just ignore it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341559297-25725-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cross compiling perf requires setting ARCH and CROSS_COMPILE variables,
but libtraceevent couldn't detect the changes so it ends up believing no
recompiling is required. Thus the linker failed like:
LINK perf
../lib/traceevent//libtraceevent.a: member ../lib/traceevent//libtraceevent.a(event-parse.o) in archive is not an object
collect2: ld returned 1 exit status
make: *** [perf] Error 1
This patch fixes this by adding TRACEEVENT-CFLAGS file like
PERF-CFLAGS to track those changes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341559297-25725-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 98d9986 (ARM: Kirkwood: Replace clock gating) and the fix 5fb2ce
(ARM: Kirkwood: clk_register_gate_fn: add fn assignment) introduced a custom
variant of clock gating which allows to define a function to be called
before gating the clock off.
This is used to disable the SATA and PCIe PHYs if the respective clocks
are unused after initialization.
However, of these two drivers, the SATA driver may be compiled as a module.
The driver re-enables the clocks at module init but the PHYs stay disabled.
Since the custom clock gating disabled the PHYs when gating the clock off,
it should also re-enable them when enabling the clock gate. This is done by
adding a second function that may be used to enable the PHYs.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Marvell engineers tell us:
It seems that many units use the RUNIT clock.
SPI, UART, NAND, TWSI, ...
So it's not possible to clock gate it.
Currently the SPI, NAND and TWSI driver will clk_prepaure_enable()
this clk, but since we have no idea what ... is, and turning this clk
off results in a hard lock, unconditionally enable runit.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Bison 2.6 started to generate parse_events_parse() declaration in header. In
this case we have redundant redeclaration:
util/parse-events.c:29:5: error: redundant redeclaration of ‘parse_events_parse’ [-Werror=redundant-decls]
In file included from util/parse-events.c:14:0:
util/parse-events-bison.h:99:5: note: previous declaration of ‘parse_events_parse’ was here
cc1: all warnings being treated as errors
Let's disable -Wredundant-decls for util/parse-events.c since it includes
header we can't control.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120723210407.GA25186@shutemov.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf uses GNU-specific version of strerror_r(). The GNU-specific strerror_r()
returns a pointer to a string containing the error message. This may be either
a pointer to a string that the function stores in buf, or a pointer to some
(immutable) static string (in which case buf is unused).
In glibc-2.16 GNU version was marked with attribute warn_unused_result. It
triggers few warnings in perf:
util/target.c: In function ‘perf_target__strerror’:
util/target.c:114:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result]
ui/browsers/hists.c: In function ‘hist_browser__dump’:
ui/browsers/hists.c:981:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result]
They are bugs.
Let's fix strerror_r() usage.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Ulrich Drepper <drepper@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/20120723210654.GA25248@shutemov.name
[ committer note: s/assert/BUG_ON/g ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There have one problem about hw_breakpoint perf event, as watched, the
events reported to userspace is not correctly, sometime one trigger
bp_event report several events, sometime bp_event cannot go through to
user.
The root cause is attr->freq is 1 passed to kernel defaultly in bp
events, this make kernel calculate event period not as expect, make
sample period to 1 will change attr->freq to 0, to fix this problem.
This patch is similar with commit f92128 about tracepoint events:
perf: Make the trace events sample period default to 1
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CACV3sbLF8taiCq_VYW-sgRJyupeMzg58C7ZXfMe3xZUiH_Mx6w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dso data caching so we don't need to open/read/close, each time
we want dso data.
The DSO data caching affects following functions:
dso__data_read_offset
dso__data_read_addr
Each DSO read tries to find the data (based on offset) inside the cache.
If it's not present it fills the cache from file, and returns the data.
If it is present, data are returned with no file read.
Each data read is cached by reading cache page sized/aligned amount of
DSO data. The cache page size is hardcoded to 4096. The cache is using
RB tree with file offset as a sort key.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding following interface for DSO object to allow
reading of DSO image data:
dso__data_fd
- opens DSO and returns file descriptor
Binary types are used to locate/open DSO in following order:
DSO_BINARY_TYPE__BUILD_ID_CACHE
DSO_BINARY_TYPE__SYSTEM_PATH_DSO
In other word we first try to open DSO build-id path,
and if that fails we try to open DSO system path.
dso__data_read_offset
- reads DSO data from specified offset
dso__data_read_addr
- reads DSO data from specified address/map.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding interface to access DSOs so it could be used
from another place.
New DSO binary type is added - making current SYMTAB__*
types more general:
DSO_BINARY_TYPE__* = SYMTAB__*
Following function is added to return path based on the specified
binary type:
dso__binary_type_file
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trace events have a period (weight) of 1 by default. This can be
overriden on events definition by using the __perf_count() macro.
For example, the sched_stat_runtime() is weighted with the runtime of
the task that fired the event.
By default, perf handles such weighted event by dividing it into
individual events carrying a weight of 1. For example if
sched_stat_runtime is fired and the task has run 5000000 nsecs, perf
divides it into 5000000 events in the buffer.
This behaviour makes weighted events unusable because they quickly
fullfill the buffers and we lose most events.
The commit 5d81e5cfb3 ("events: Don't
divide events if it has field period") solves this problem by sending
only one event when PERF_SAMPLE_PERIOD flag is set. The weight is
carried in the sample itself such that we don't need to demultiplex it
anymore.
This patch provides the last missing piece to use this feature by
setting PERF_SAMPLE_PERIOD from perf tools when we deal with trace
events.
Before:
$ ./perf record -e sched:* -a sleep 1
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 1.619 MB perf.data (~70749 samples) ]
Warning:
Processed 16909 events and lost 1 chunks!
Check IO/CPU overload!
$ ./perf script
perf 1894 [003] 824.898327: sched_migrate_task: comm=perf pid=1898 prio=120 orig_cpu=2 dest_cpu=0
perf 1894 [003] 824.898335: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898336: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898337: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898338: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898339: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898340: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898341: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
[...]
After:
$ ./perf record -e sched:* -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.074 MB perf.data (~3228 samples) ]
$ ./perf script
perf 1461 [000] 554.286957: sched_migrate_task: comm=perf pid=1465 prio=120 orig_cpu=3 dest_cpu=1
perf 1461 [000] 554.286964: sched_stat_sleep: comm=perf pid=1465 delay=133047190 [ns]
perf 1461 [000] 554.286967: sched_wakeup: comm=perf pid=1465 prio=120 success=1 target_cpu=001
swapper 0 [001] 554.286976: sched_stat_wait: comm=perf pid=1465 delay=0 [ns]
swapper 0 [001] 554.286983: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=perf
[...]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342631456-7233-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include the omitted number of characters printed for the first entry.
Not that it really matters because nobody seem to care about the number
of printed characters for now. But just in case.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342631456-7233-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After 7ed97ad use of the guestmount option without a subdir for *each*
VM generates an error message for each sample related to that VM. Once
per VM is enough.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Guest kernel symbols are not resolved despite passing the information
needed to resolve them. e.g.,
perf kvm --guest --guestmount=/tmp/guest-mount record -a -- sleep 1
perf kvm --guest --guestmount=/tmp/guest-mount report --stdio
36.55% [guest/11399] [unknown] [g] 0xffffffff81600bc8
33.19% [guest/10474] [unknown] [g] 0x00000000c0116e00
30.26% [guest/11094] [unknown] [g] 0xffffffff8100a288
43.69% [guest/10474] [unknown] [g] 0x00000000c0103d90
37.38% [guest/11399] [unknown] [g] 0xffffffff81600bc8
12.24% [guest/11094] [unknown] [g] 0xffffffff810aa91d
6.69% [guest/11094] [unknown] [u] 0x00007fa784d721c3
which is just pathetic.
After a maddening 2 days sifting through perf minutia I found it --
id_hdr_size is not initialized for guest machines. This shows up on the
report side as random garbage for the cpu and timestamp, e.g.,
29816 7310572949125804849 0x1ac0 [0x50]: PERF_RECORD_MMAP ...
That messes up the sample sorting such that synthesized guest maps are
processed last.
With this patch you get a much more helpful report:
12.11% [guest/11399] [guest.kernel.kallsyms.11399] [g] irqtime_account_process_tick
10.58% [guest/11399] [guest.kernel.kallsyms.11399] [g] run_timer_softirq
6.95% [guest/11094] [guest.kernel.kallsyms.11094] [g] printk_needs_cpu
6.50% [guest/11094] [guest.kernel.kallsyms.11094] [g] do_timer
6.45% [guest/11399] [guest.kernel.kallsyms.11399] [g] idle_balance
4.90% [guest/11094] [guest.kernel.kallsyms.11094] [g] native_read_tsc
...
v2:
- changed rbtree walk to use rb_first per Namhyung's suggestion
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
COMM events are not generated in the context of a guest machine, so the
thread name is never set for the VMM process. For example, the qemu-kvm
name applies to the process in the host machine, not the guest machine.
So, samples for guest machines are currently displayed as:
99.67% :5671 [unknown] [g] 0xffffffff81366b41
where 5671 is the pid of the VMM. With this patch the samples in the guest
machine are shown as:
18.43% [guest/5671] [unknown] [g] 0xffffffff810d68b7
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds a fixed virtual mapping for PCI i/o addresses. The mapping is
located at the last 2MB of vmalloc region (0xfee00000-0xff000000). 2MB
is used to align with PMD size, but IO_SPACE_LIMIT is 1MB. The space
is reserved after .map_io and can be mapped at any time later with
pci_ioremap_io. Platforms which need early i/o mapping (e.g. for vga
console) can call pci_map_io_early in their .map_io function.
This has changed completely from the 1st implementation which only
supported creating the static mapping at .map_io.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@linaro.org>
Instead of using the custom iop3xx gpio functions, use the gpiolib
variants. This should be functionally the same since the gpiolib
just calls the iop3xx gpio functions. This is needed in preparation
of removing iop3xx mach/io.h headers.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
Adds basic platform devices for Loongson 1B, including serial port,
ethernet, USB, RTC and interrupt handler.
The Loongson 1B UART is compatible with NS16550A, the Loongson 1B GMAC is
built around a Synopsys IP Core.
Use normal instead of enhanced descriptors.
Thanks to Giuseppe for updating the normal descriptor in stmmac driver.
Thanks to Zhao Zhang for implementing the RTC driver.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: zhzhl555@gmail.com
Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/4133/
Patchwork: https://patchwork.linux-mips.org/patch/4134/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit eccc068e8e
Author: Hong Wu <Hong.Wu@dspg.com>
Date: Wed Jan 11 20:33:39 2012 +0200
wireless: Save original maximum regulatory transmission power for the calucation of the local maximum transmit pow
changed the way we calculate chan->max_power as min(chan->max_power,
chan->max_reg_power). That broke rt2x00 (and perhaps some other
drivers) that do not set chan->max_power. It is not so easy to fix this
problem correctly in rt2x00.
According to commit eccc068e8 changelog, change claim only to save
maximum regulatory power - changing setting of chan->max_power was side
effect. This patch restore previous calculations of chan->max_power and
do not touch chan->max_reg_power.
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In nfsd_destroy():
if (destroy)
svc_shutdown_net(nfsd_serv, net);
svc_destroy(nfsd_server);
svc_shutdown_net(nfsd_serv, net) calls nfsd_last_thread(), which sets
nfsd_serv to NULL, causing a NULL dereference on the following line.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I don't think there's a practical difference for the range of values
these interfaces should see, but it would be safer to be unambiguous.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch adds recall_lock hold to nfsd_forget_delegations() to protect
nfsd_process_n_delegations() call.
Also, looks like it would be better to collect delegations to some local
on-stack list, and then unhash collected list. This split allows to
simplify locking, because delegation traversing is protected by recall_lock,
when delegation unhash is protected by client_mutex.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes a wrong check for same cr_principal in same_creds
Introduced by 8fbba96e5b "nfsd4: stricter
cred comparison for setclientid/exchange_id".
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Due to automatic merge of a613163dff
"ARM: integrator: convert to common clock" and
56a34b03ff "ARM: versatile: Make
plat-versatile clock optional" two platforms: Integrator and
Versatile Express now select both COMMON_CLK and
PLAT_VERSATILE_CLOCK which breaks building them. Fixed now.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The merge of the 'clk-for-linus' branch caused an automated
merge failure. Pull that in here so we can fix the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The irq field of struct snd_mpu401 is supposed to be initialized to -1.
Since it's set to zero as of now, a probing error before the irq
installation results in a kernel warning "Trying to free already-free
IRQ 0".
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a bug report about the silent output from the headphone on a
mobo with VT2021, and spotted out that this was because of the wrong
D3 state on the DAC for the headphone output. The bug is triggered by
the incomplete check for this DAC in set_widgets_power_state_vt1718S().
It checks only the connectivity of the primary output (0x27) but
doesn't consider the path from the headphone pin (0x28).
Now this patch fixes the problem by checking both pins for DAC 0x0b.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some interrupt chips like MSI are oneshot safe by implementation. For
those interrupts we can avoid the mask/unmask sequence for threaded
interrupt handlers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1207132056540.32033@ionos
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Jan Kiszka <jan.kiszka@web.de>