To support COMMON_CLK_MEDIATEK module build,
add MODULE_LICENSE and export necessary symbols.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Hanks Chen <hanks.chen@mediatek.com>
Cc: Wendell Lin <wendell.lin@mediatek.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210901222526.31065-3-miles.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
To support module build of mediatek clk drivers,
it is necessary to export clk_register_composite.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Hanks Chen <hanks.chen@mediatek.com>
Cc: Wendell Lin <wendell.lin@mediatek.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210901222526.31065-2-miles.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the binding documentatoin for fixed-mmio-clock to YAML.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20210903152615.31453-1-kabel@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ICST binding now also supports 'reg' in addition to 'vco-offset' for
the VCO register address. Add support to the driver to get the VCO
address from 'reg'.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210913192816.1225025-6-robh@kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'reg' is the standard property for defining register banks/addresses. Add
it to use for the VCO register address and deprecate 'vco-offset'. This
will also allow for using standard node names with unit-addresses.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210913192816.1225025-5-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Andrii Nakryiko says:
====================
This small patch set performs internal refactorings around libbpf BPF program
ELF section definitions' handling. This is preparatory changes for further
changes around making libbpf BPF program section handling more strict but also
pluggable and customizable, as part of the libbpf 1.0 effort. See individual
patches for details.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove almost all the code that explicitly iterated BPF program section
definitions in favor of using find_sec_def(). The only remaining user of
section_defs is libbpf_get_type_names that has to iterate all of them to
construct its result.
Having one internal API entry point for section definitions will
simplify further refactorings around libbpf's program section
definitions parsing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-5-andrii@kernel.org
Remove the need to explicitly pass bpf_sec_def for auto-attachable BPF
programs, as it is already recorded at bpf_object__open() time for all
recognized type of BPF programs. This further reduces number of explicit
calls to find_sec_def(), simplifying further refactorings.
No functional changes are done by this patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-4-andrii@kernel.org
Refactor bpf_object__open() sequencing to perform BPF program type
detection based on SEC() definitions before we get to relocations
collection. This allows to have more information about BPF program by
the time we get to, say, struct_ops relocation gathering. This,
subsequently, simplifies struct_ops logic and removes the need to
perform extra find_sec_def() resolution.
With this patch libbpf will require all struct_ops BPF programs to be
marked with SEC("struct_ops") or SEC("struct_ops/xxx") annotations.
Real-world applications are already doing that through something like
selftests's BPF_STRUCT_OPS() macro. This change streamlines libbpf's
internal handling of SEC() definitions and is in the sprit of
upcoming libbpf-1.0 section strictness changes ([0]).
[0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-3-andrii@kernel.org
Update struct_ops selftests to always specify "struct_ops" section
prefix. Libbpf will require a proper BPF program type set in the next
patch, so this prevents tests breaking.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210914014733.2768-2-andrii@kernel.org
Like DG1, XeHP SDV doesn't have LLC/eDRAM control values due to being a
dgfx card. XeHP SDV adds 2 more bits: L3_GLBGO to "push the Go point to
memory for L3 destined transaction" and L3_LKP to "enable Lookup for
uncacheable accesses".
Bspec: 45101
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210904003544.2422282-2-matthew.d.roper@intel.com
The concern here is that "ret" can be uninitialized if we hit the
"goto next" condition on every iteration through the loop.
Fixes: 41ba1b5f9d4b ("vdpa: Support transferring virtual addressing during DMA mapping")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210907073253.GB18254@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Avoid executing set_vq_ready() if the device has been reset. In such
case, the features are cleared and cannot be used in conditional
statements. Such reference happens is the function ctrl_vq_idx().
Fixes: 52893733f2 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909063738.46970-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When clearing VQs ready indication for the data VQs, do the same for the
control VQ.
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909063652.46880-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We should cleanup the old kernel states e.g. interrupt callback
no matter whether the userspace handle the reset correctly or not
since virtio-vdpa can't handle the reset failure now.
Otherwise, the old state might be used after reset which might
break something, e.g. the old interrupt callback might be triggered
by userspace after reset, which can break the virtio device driver.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210906142158.181-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This should return -ENOMEM if alloc_workqueue() fails. Currently it
returns success.
Fixes: b66219796563 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210907073223.GA18254@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
A recent change checking of_device_is_compatible on probe broke some
powerpc/pseries setups. Apparently there virtio devices do not have a
"compatible" property - they are matched by PCI vendor/device ids.
Let's just skip of_node setup but proceed with initialization like we
did previously.
Fixes: 694a1116b4 ("virtio: Bind virtio device to device-tree node")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add MT8195 imp i2c wrapper clock controllers which provide clock gate
control in I2C IP blocks.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-24-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 vdosys1 clock controller which provides clock gate
control in video system. This is integrated with mtk-mmsys
driver which will populate device by platform_device_register_data
to start vdosys clock driver.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210914021633.26377-19-chun-jie.chen@mediatek.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 vdosys0 clock controller which provides clock gate
control in video system. This is integrated with mtk-mmsys
driver which will populate device by platform_device_register_data
to start vdosys clock driver.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210914021633.26377-18-chun-jie.chen@mediatek.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 vdec clock controllers which provide clock gate
control for video decoder.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-17-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 imgsys clock controllers which provide clock gate
control for image IP blocks.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-13-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 ccusys clock controller which provides clock gate
control in Camera Computing Unit.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-12-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 camsys clock controllers which provide clock gate
control for camera IP blocks.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-11-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT8195 infrastructure clock controller which provides
clock gate control for basic IP like pwm, uart, spi and so on.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210914021633.26377-10-chun-jie.chen@mediatek.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid resource leak when fail clock registration appears,
so adds the common interface to handle it.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-5-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On MT8195, tuner_en_reg is moved to register offest 0x0.
If we only judge by tuner_en_reg, it may lead to wrong address.
Add tuner_en_bit to the check condition. And it has been confirmed,
on all the MediaTek SoCs, bit0 of offset 0x0 is always occupied by
clock square control.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-4-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the new binding documentation for system clock
and functional clock on Mediatek MT8195.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Allow kprobe tracepoint events creation through legacy interface, as the
kprobe dynamic PMUs support, used by default, was only created in v4.17.
Store legacy kprobe name in struct bpf_perf_link, instead of creating
a new "subclass" off of bpf_perf_link. This is ok as it's just two new
fields, which are also going to be reused for legacy uprobe support in
follow up patches.
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210912064844.3181742-1-rafaeldtinoco@gmail.com
A previous patch removes the "xo" clock from the global namespace making
it impossible to acquire by that ".name". The device-tree for msm8998
already provides the "xo" and "gpll0" clock since the addition of the
gpucc node making it unnecessary to have this fallback at all.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-8-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some of these clocks are not referenced by the driver at all whereas
aud_ref_clk and core_bi_pll_test_se are but were missing from the
bindings. These clocks are optional (and not currently provided
anywhere) while "xo" and "sleep_clk" are mandatory.
Note that none of these clocks were used beforehand as the driver
referenced them by their global name.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-7-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Where possible, use ARRAY_SIZE to determine the number of parents in
clk_parent_data, instead of hardcoding it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-6-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Where possible, use ARRAY_SIZE to determine the number of parents in
clk_parent_data, instead of hardcoding it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-5-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Now that all clock controllers and the DSI PLL clocks rely on "xo" being
passed in DT as phandle instead of looking it up by the global "xo" name
this transient clock can be removed, leaving only the fixed-factor
"xo_board" clock in DT.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-4-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use parent_data and parent_hws to specify internal relations using
pointers instead of names, and use .fw_name to retrieve external clocks
from clock-names in the DT rather than the global clock tree.
Note that this change relies on the "xo" and "sleep_clk" clocks to be
provided in DT, as per the relevant qcom,gcc-mnsm8998.yaml dt-bindings.
These clocks have been added in a prior patch [1].
[1]: https://lore.kernel.org/linux-arm-msm/20210911120101.248476-1-marijn.suijten@somainline.org/
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-3-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>